EN ISO 3095:2013
Current
The latest, up-to-date edition.
Acoustics - Railway applications - Measurement of noise emitted by railbound vehicles (ISO 3095:2013)
07-08-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Instrumentation and calibration
5 Stationary test
6 Constant speed test
7 Acceleration test from standstill
8 Braking test
9 Quality of the measurements
10 Test report
Annex A (normative) - Method to characterize the
impulsive character of the noise
Annex B (normative) - Tests at constant speed - Special
cases
Annex C (normative) - Method to assess acceptable small
deviations from acoustic rail roughness requirements
Annex D (informative) - Guidance for light rail vehicles
measurement
Annex E (informative) - Comparability of test situations
in terms of acoustic rail roughness
Annex F (informative) - Additional measurements
Annex G (informative) - Quantification of measurement
uncertainties according to ISO/IEC Guide 98-3:2008
Bibliography
ISO 3095:2013 specifies measurement methods and conditions to obtain reproducible and comparable exterior noise emission levels and spectra for all kinds of vehicles operating on rails or other types of fixed track, hereinafter conventionally called "unit".ISO 3095:2013 is applicable to type testing of units. It does not include all the instructions to characterize the noise emission of the other infrastructure related sources (bridges, crossings, switching, impact noise, curving noise, etc.).ISO 3095:2013 is not applicable to:- the noise emission of track maintenance units while working;- environmental impact assessment;- noise emmission assessment;- guided buses;- warning signal noise.The results may be used, for example:- to characterize the exterior noise emitted by units;- to compare the noise emission of various units on a particular track section;- to collect basic source data for units.
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| SN EN ISO 3095:2013 | Identical |
| SS-EN ISO 3095:2013 | Identical |
| NEN EN ISO 3095 : 2013 | Identical |
| I.S. EN ISO 3095:2013 | Identical |
| PN EN ISO 3095 : 2013 | Identical |
| UNE-EN ISO 3095:2014 | Identical |
| ONORM EN ISO 3095 : 2014 | Identical |
| NS EN ISO 3095 : 2013 | Identical |
| BS EN ISO 3095:2013 | Identical |
| NBN EN ISO 3095 : 2013 | Identical |
| DIN EN ISO 3095:2014-07 | Identical |
| ISO 3095:2013 | Identical |
| UNI EN ISO 3095 : 2013 | Identical |
| NF EN ISO 3095 : 2013 | Identical |
| 17/30334205 DC : 0 | BS EN 13979-1 - RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - MONOBLOC WHEELS - DESIGN ASSESSMENT PROCEDURE - PART 1: FORGED AND ROLLED WHEELS |
| PREN 15610 : DRAFT 2017 | RAILWAY APPLICATIONS - ACOUSTICS - RAIL AND WHEEL ROUGHNESS MEASUREMENT RELATED TO ROLLING NOISE GENERATION |
| 08/30189631 DC : DRAFT SEP 2008 | BS EN 50215 - RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE |
| I.S. EN 50215:2009 | RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE |
| NF EN 15827 : 2011 | RAILWAY APPLICATIONS - REQUIREMENTS FOR BOGIES AND RUNNING GEARS |
| CEI EN 50215 : 2011 | RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE |
| I.S. EN 15153-2:2013 | RAILWAY APPLICATIONS - EXTERNAL VISIBLE AND AUDIBLE WARNING DEVICES FOR TRAINS - PART 2: WARNING HORNS |
| BS EN 15153-2:2013 | Railway applications. External visible and audible warning devices for trains Warning horns |
| UNE-EN ISO 3381:2011 | Railway applications - Acoustics - Measurement of noise inside railbound vehicles (ISO 3381:2005) |
| 17/30326391 DC : 0 | BS EN 15153-2 - RAILWAY APPLICATIONS - EXTERNAL VISIBLE AND AUDIBLE WARNING DEVICES - PART 2: WARNING HORNS FOR MAINLINE RAIL |
| BS EN 50215:2009 | Railway applications — Rolling stock — Testing of rolling stock on completion of construction and before entry into service |
| PREN 13979-1 : DRAFT 2017 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - MONOBLOC WHEELS - DESIGN ASSESSMENT PROCEDURE - PART 1: FORGED AND ROLLED WHEELS |
| S.R. CEN/TR 15874:2009 | RAILWAY APPLICATIONS - NOISE EMISSION - ROAD TEST OF STANDARD FOR RAIL ROUGHNESS MEASUREMENT EN 15610:2009 |
| S.R. CEN/TR 16891:2016 | RAILWAY APPLICATIONS - ACOUSTICS - MEASUREMENT METHOD FOR COMBINED ROUGHNESS, TRACK DECAY RATES AND TRANSFER FUNCTIONS |
| EN 15153-2:2013 | Railway applications - External visible and audible warning devices for trains - Part 2: Warning horns |
| I.S. EN ISO 3381:2011 | RAILWAY APPLICATIONS - ACOUSTICS - MEASUREMENT OF NOISE INSIDE RAILBOUND VEHICLES |
| BS EN 15827:2011 | Railway applications. Requirements for bogies and running gears |
| NF EN 50215 : 2010 | RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE |
| UNE-EN 15153-2:2014 | Railway applications - External visible and audible warning devices for trains - Part 2: Warning horns |
| UNI EN 15827 : 2011 | RAILWAY APPLICATIONS - REQUIREMENTS FOR BOGIES AND RUNNING GEARS |
| 10/30205116 DC : 0 | BS EN 15153-2 - RAILWAY APPLICATIONS - EXTERNAL VISIBLE AND AUDIBLE WARNING DEVICES FOR TRAINS - PART 2: WARNING HORNS |
| PD CEN/TR 15874:2009 | Railway applications. Noise emission. Road test of standard for rail roughness measurement EN 15610:2009 |
| EN ISO 3381:2011 | Railway applications - Acoustics - Measurement of noise inside railbound vehicles (ISO 3381:2005) |
| DIN EN ISO 3381:2011-05 | Railway applications - Acoustics - Measurement of noise inside railbound vehicles (ISO 3381:2005) |
| ISO 3381:2005 | Railway applications Acoustics Measurement of noise inside railbound vehicles |
| BS EN ISO 3381:2011 | Railway applications. Acoustics. Measurement of noise inside railbound vehicles |
| UNE-EN 15827:2011 | Railway applications - Requirements for bogies and running gears |
| EN 15827:2011 | Railway applications - Requirements for bogies and running gears |
| DIN EN 15827:2011-06 | Railway applications - Requirements for bogies and running gears |
| PD CEN/TR 16891:2016 | Railway applications. Acoustics. Measurement method for combined roughness, track decay rates and transfer functions |
| UNI CEN/TR 15874 : 2009 | RAILWAY APPLICATIONS - NOISE EMISSION - ROAD TEST OF STANDARD FOR RAIL ROUGHNESS MEASUREMENT EN 15610:2009 |
| 17/30304301 DC : 0 | BS EN 15610 - RAILWAY APPLICATIONS - ACOUSTICS - RAIL AND WHEEL ROUGHNESS MEASUREMENT RELATED TO ROLLING NOISE GENERATION |
| I.S. EN 15827:2011 | RAILWAY APPLICATIONS - REQUIREMENTS FOR BOGIES AND RUNNING GEARS |
| UNI EN 15153-2 : 2013 | RAILWAY APPLICATIONS - EXTERNAL VISIBLE AND AUDIBLE WARNING DEVICES FOR TRAINS - PART 2: WARNING HORNS |
| DIN EN 15153-2:2013-04 | RAILWAY APPLICATIONS - EXTERNAL VISIBLE AND AUDIBLE WARNING DEVICES FOR TRAINS - PART 2: WARNING HORNS |
| CEN/TR 15874:2009 | Railway applications - Noise emission - Road test of standard for rail roughness measurement EN 15610:2009 |
| UNI EN ISO 3381 : 2011 | RAILWAY APPLICATIONS - ACOUSTICS - MEASUREMENT OF NOISE INSIDE RAILBOUND VEHICLES |
| EN 50215:2009 | Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service |
| CEN/TR 16891:2016 | Railway applications - Acoustics - Measurement method for combined roughness, track decay rates and transfer functions |
| IEC 61672-2:2013+AMD1:2017 CSV | Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| EN 13452-1:2003 | Railway applications - Braking - Mass transit brake systems - Part 1: Performance requirements |
| ISO 12001:1996 | Acoustics Noise emitted by machinery and equipment Rules for the drafting and presentation of a noise test code |
| EN 1793-3:1997 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 3: Normalized traffic noise spectrum |
| ISO 1996-2:2017 | Acoustics — Description, measurement and assessment of environmental noise — Part 2: Determination of sound pressure levels |
| ISO 12576-1:2001 | Thermal insulation Insulating materials and products for buildings Conformity control systems Part 1: Factory-made products |
| EN 15461:2008+A1:2010 | Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements |
| IEC 60942:2003 | Electroacoustics - Sound calibrators |
| ISO 266:1997 | Acoustics — Preferred frequencies |
| ISO 9613-2:1996 | Acoustics — Attenuation of sound during propagation outdoors — Part 2: General method of calculation |
| ISO 80000-8:2007 | Quantities and units Part 8: Acoustics |
| EN 14813-1:2006+A1:2010 | Railway applications - Air conditioning for driving cabs - Part 1: Comfort parameters |
| ISO 1996-1:2016 | Acoustics Description, measurement and assessment of environmental noise Part 1: Basic quantities and assessment procedures |
| IEC 60263:1982 | Scales and sizes for plotting frequency characteristics and polar diagrams |
| EN 13129-1 : 2002 | RAILWAY APPLICATIONS - AIR CONDITIONING FOR MAIN LINE ROLLING STOCK - PART 1: COMFORT PARAMETERS |
| EN 15610:2009 | Railway applications - Noise emission - Rail roughness measurement related to noise generation |
| EN 14750-1 : 2006 | RAILWAY APPLICATIONS - AIR CONDITIONING FOR URBAN AND SUBURBAN ROLLING STOCK - PART 1: COMFORT PARAMETERS |
| IEC 61260:1995 | Electroacoustics - Octave-band and fractional-octave-band filters |
| DIN 45681:2005-03 | ACOUSTICS - DETERMINATION OF TONAL COMPONENTS OF NOISE AND DETERMINATION OF A TONE ADJUSTMENT FOR THE ASSESSMENT OF NOISE IMMISSIONS |
| ISO 3381:2005 | Railway applications Acoustics Measurement of noise inside railbound vehicles |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.