We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
  • EN ISO 3745:2012/A1:2017

    Current The latest, up-to-date edition.
    Add to Watchlist
    This Standard has been added successfully to your Watchlist.
    Please visit My Watchlist to see all standards that you are watching.
    Please log in or to add this standard to your Watchlist.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    You need to be logged in to add this standard to your Watchlist.
    Please log in now or create an account to add.
    You already added this Product in the Watchlist.

    ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012/AMD 1:2017)

    Available format(s): 

    Language(s): 

    Published date:  10-05-2017

    Publisher:  Comite Europeen de Normalisation

    Add to Watchlist
    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    European foreword
    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Reference meteorological conditions
    5 Test rooms
    6 Instrumentation
    7 Definition, location, installation and operation
       of noise source under test
    8 Measurement surface
    9 Determination of sound power levels and
       sound energy levels
    10 Measurement uncertainty
    11 Information to be recorded
    12 Test report
    Annex A (normative) - General procedures for qualification
            of anechoic and hemi-anechoic rooms
    Annex B (normative) - Qualification procedure for spaces
            within test rooms used in the determination of sound
            power levels and sound energy levels of specific
            noise sources
    Annex C (normative) - Calculation of A-weighted sound
            power levels and A-weighted sound energy levels from
            one-third-octave band levels
    Annex D (normative) - Array of microphone positions
            on a spherical measurement surface in a free field
    Annex E (normative) - Arrays of microphone positions
            on a hemispherical measurement surface in a
            hemi-free field
    Annex F (normative) - Coaxial circular paths of
            microphones on a hemispherical measurement surface
            in a hemi-free field
    Annex G (normative) - Meridional paths of microphones
            on a hemispherical measurement surface in a
            hemi-free field
    Annex H (normative) - Spiral paths of microphones on
            a hemispherical measurement surface in a
            hemi-free field
    Annex I (informative) - Guidance on the development
            of information on measurement uncertainty
    Annex ZA (informative) - Relationship between this European
             Standard and the Essential Requirements of
             Directive 2006/42/EC aimed to be covered
    Bibliography

    General Product Information - (Show below) - (Hide below)

    Committee CEN/TC 211
    Development Note Supersedes PREN ISO 3745. (11/2010)
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS EN 61481-1 : 2014 LIVE WORKING - PHASE COMPARATORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
    UNI EN 1807-1 : 2013 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
    BS EN 15571:2014 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
    09/30178310 DC : DRAFT FEB 2009 BS EN 1807:1999/A1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
    UNE-EN 62075:2013 Audio/video, information and communication technology equipment - Environmentally conscious design
    BS EN 16564:2014 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
    BS EN 12102 : 2013 AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
    PREN 13487 : DRAFT 2017 HEAT EXCHANGER - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS AND DRY COOLERS - SOUND MEASUREMENT
    10/30227080 DC : DRAFT JUNE 2010 BS EN 691-1 - SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
    EN 13141-7:2010 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 7: PERFORMANCE TESTING OF A MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR SINGLE FAMILY DWELLINGS
    UNI EN 691-1 : 2012 SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
    DIN EN 1807-1:2013-06 Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws
    11/30237566 DC : 0 BS EN 1870-18 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
    BS EN 13141-11:2015 (published 2015-05) Ventilation for buildings. Performance testing of components/products for residential ventilation Supply ventilation units
    UNE-EN 1870-13:2008 Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines
    BS EN 1870-19 : 2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
    09/30206358 DC : DRAFT SEP 2009 BS EN 1870-4 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTI-BLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
    BS EN 16430-1 : 2014 FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
    DIN EN 691-1:2013-01 SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
    BS EN 1870-18 : 2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
    I.S. EN 1870-1:2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
    DIN EN 1870-19:2014-03 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
    12/30255711 DC : 0 BS EN 16430-1 - FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
    I.S. EN 848-3:2012 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
    11/30237560 DC : 0 BS EN 1870-12 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
    I.S. EN 16430-1:2014 FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
    I.S. EN 848-1:2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
    BS EN 62075 : 2012 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN
    UNI EN 1870-19 : 2014 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
    04/30122794 DC : DRAFT SEP 2004 EN 15036-1 - HEATING BOILERS - TEST REGULATIONS FOR AIRBORNE NOISE EMISSIONS FROM HEAT GENERATORS - PART 1: AIRBORNE NOISE EMISSIONS FROM HEAT GENERATORS AT PLACE OF INSTALLATION
    I.S. EN 691-1:2012 SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
    I.S. EN 1870-13:2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
    UNE-EN 71-1:2015 Safety of toys - Part 1: Mechanical and physical properties
    PREN 848-3 : DRAFT 2010 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
    DIN EN 15572:2015-12 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
    BS EN 12012-1 : 2007 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
    BS EN 60534-8-1 : 2005 INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-1: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY AERODYNAMIC FLOW THROUGH CONTROL VALVES
    10/30232428 DC : DRAFT DEC 2010 BS EN 1870-16 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
    UNE-EN 61481-1:2015 Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
    07/30161919 DC : 0 EN 940 - SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
    EN 1218-5:2004+A1:2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
    12/30259067 DC : 0 BS EN 71-1:2011/A2 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
    13/30267124 DC : 0 BS EN 13141-11 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: POSITIVE PRESSURE VENTILATION SYSTEMS
    08/30165047 DC : DRAFT JUNE 2008 BS EN ISO 9906 - ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS
    DIN EN 16564 E : 2015 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
    12/30260496 DC : 0 BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
    EN 1218-2:2004+A1:2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
    12/30263881 DC : 0 BS EN 1870-3 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
    BS EN 16583:2015 Heat exchangers. Hydronic room fan coils units. Determination of the sound power level
    13/30267113 DC : 0 BS EN 13141-6 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 6: EXHAUST VENTILATION SYSTEM PACKAGES USED IN A SINGLE DWELLING
    DIN EN 1870-19 E : 2014 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
    EN 1218-1:1999+A1:2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
    12/30253907 DC : DRAFT JULY 2012 BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - TABLE BAND SAWS AND BAND RE-SAWS
    10/30233212 DC : 0 BS EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
    DIN EN 15571:2015-03 Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines
    09/30198762 DC : 0 BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
    BS EN 15572 : 2015 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
    DIN EN 13141-11 E : 2015 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: SUPPLY VENTILATION UNITS
    12/30253910 DC : DRAFT JULY 2012 BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - LOG SAWING MACHINES
    10/30232422 DC : DRAFT DEC 2010 BS EN 1870-9 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
    PREN 1870-3 : DRAFT 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
    I.S. EN 12102-1:2017 AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS, PROCESS CHILLERS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS - DETERMINATION OF THE SOUND POWER LEVEL - PART 1: AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS FOR SPACE HEATING AND COOLING, DEHUMIDIFIERS AND PROCESS CHILLERS
    BS EN 1807-2 : 2013 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
    14/30301841 DC : 0 BS EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
    10/30232431 DC : DRAFT DEC 2010 BS EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS)
    I.S. EN 60534-8-1:2005 INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-1: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY AERODYNAMIC FLOW THROUGH CONTROL VALVES
    09/30178334 DC : DRAFT FEB 2009 BS EN 1870-8:2001/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
    09/30178337 DC : 0 BS EN 1870-9:2000/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
    DIN EN 16583:2015-10 Heat exchangers - Hydronic room fan coils units - Determination of the sound power level
    11/30237557 DC : 0 BS EN 1870-11 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
    DIN EN 1807-2:2013-06 Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines; German version EN 1807-2:2013
    DIN EN 16583 E : 2015 HEAT EXCHANGERS - HYDRONIC ROOM FAN COILS UNITS - DETERMINATION OF THE SOUND POWER LEVEL
    12/30232434 DC : 0 BS EN 1870-5:2002+A1:2009 AMD 2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
    VDI 4709:2015-08 CENTRAL VACUUM CLEANING SYSTEMS - DESIGN, TESTING AND APPLICATION IN FACILITY MANAGEMENT
    DIN EN 16564:2015-04 Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
    BS EN 1870-6:2017 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIRE WOOD
    UNE-EN 1870-18:2013 Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws
    UNE-EN 15571:2015 Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines
    05/30133339 DC : DRAFT MAY 2005 EN 861 - SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
    UNE-EN 691-1:2013 Safety of woodworking machines - Part 1: Common requirements
    12/30271386 DC : 0 BS EN 12102 - AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
    11/30237569 DC : 0 BS EN 1870-19 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
    DIN EN 13141-11:2015-07 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: SUPPLY VENTILATION UNITS
    09/30178328 DC : 0 BS EN 1870-6:2002/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
    05/30133333 DC : DRAFT MAY 2005 EN 860 - SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
    DIN EN 16430-1 E : 2015 FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
    DIN EN 15571 E : 2015 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
    BS EN 1807-1:2013 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
    I.S. EN 15571:2014 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
    DIN EN 1870-18:2013-08 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
    11/30237563 DC : 0 BS EN 1870-10 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
    DIN EN 16430-1:2015-03 FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
    PREN 1870-11 : DRAFT 2011 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
    16/30345760 DC : 0 BS EN 12102-2 - AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS - DETERMINATION OF THE SOUND POWER LEVEL - PART 2: HEAT PUMP WATER HEATERS
    09/30178325 DC : DRAFT FEB 2009 BS EN 1870-5:2002/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
    09/30178331 DC : DRAFT FEB 2009 BS EN 1870-7:2002/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
    UNE-EN 16564:2015 Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
    09/30178343 DC : 0 BS EN 1870-11:2003/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
    BS EN 71-1 : 2014 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
    11/30244804 DC : 0 BS EN 940:2009/A1 - SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
    EN 71-1:2014 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
    09/30197984 DC : 0 BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
    09/30178340 DC : 0 BS EN 1870-10:2003/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
    09/30178346 DC : 0 BS EN 1870-12:2003/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
    I.S. EN 1870-18:2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
    UNI EN 1870-18 : 2014 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
    05/30133297 DC : DRAFT MAY 2005 EN 859 - SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
    UNE-EN 16430-1:2015 Fan assisted radiators, convectors and trench convectors - Part 1: Technical specifications and requirements
    UNE-EN 1807-1:2013 Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws
    CEI EN 60534-8-2 : 2012 INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-2: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY HYDRODYNAMIC FLOW THROUGH CONTROL VALVES
    BS EN 60034-9 : 2005 ROTATING ELECTRICAL MACHINES - PART 9: NOISE LIMITS
    UNE-EN 1807-2:2013 Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines
    CSA Z107.58 : 2015 NOISE EMISSION DECLARATIONS FOR MACHINERY
    CEI EN 62075 : 2013 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN
    PREN 71-1 : DRAFT 2014 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
    PREN 1870-6 : DRAFT 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
    I.S. EN 1807-1:2013 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
    I.S. EN 13141-11:2015 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: SUPPLY VENTILATION UNITS
    UNE-EN 1870-6:2003 Safety of woodworking machines. Circular sawing machines. Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading.
    BS EN 61243-3:2014 (published 2015-02) Live working. Voltage detectors Two-pole low-voltage type
    BS EN 60534-8-2 : 2011 INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-2: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY HYDRODYNAMIC FLOW THROUGH CONTROL VALVES
    I.S. EN 12102:2013 AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
    PREN 1870-12 : DRAFT 2011 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
    I.S. EN 1807-2:2013 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
    I.S. EN 15572:2015 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
    UNI EN 1807-2 : 2013 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
    CEI EN 60534-8-1 : 2006 VANNES DE REGULATION DES PROCESSUS INDUSTRIELS - PARTIE 8-1: CONSIDERATIONS SUR LE BRUIT - MESURE EN LABORATOIRE DU BRUIT CREE PAR UN DEBIT AERODYNAMIQUE A TRAVERS UNE VANNE DE REGULATION
    I.S. EN 16564:2014 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
    I.S. EN 61481-1:2014 LIVE WORKING - PHASE COMPARATORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
    I.S. EN 60034-9:2005 ROTATING ELECTRICAL MACHINES - PART 9: NOISE LIMITS
    I.S. EN 1870-19:2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
    UNI EN 71-1 : 2015 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
    PREN 12102-2 : DRAFT 2016 AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS - DETERMINATION OF THE SOUND POWER LEVEL - PART 2: HEAT PUMP WATER HEATERS
    PREN 13141-6 : DRAFT 2012 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 6: EXHAUST VENTILATION SYSTEM PACKAGES USED IN A SINGLE DWELLING
    UNE-EN 13141-11:2015 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 11: Supply ventilation units
    EN 12012-1:2007+A1:2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
    I.S. EN 16583:2015 HEAT EXCHANGERS - HYDRONIC ROOM FAN COILS UNITS - DETERMINATION OF THE SOUND POWER LEVEL
    BS PD CEN/TR 16953 : 2017 MEDICAL GLOVES FOR SINGLE USE - GUIDANCE FOR SELECTION
    I.S. EN 60534-8-2:2011 INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-2: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY HYDRODYNAMIC FLOW THROUGH CONTROL VALVES (IEC 60534-8-2:2011 (EQV))
    17/30361327 DC : 0 BS EN 13487 - HEAT EXCHANGER - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS AND DRY COOLERS - SOUND MEASUREMENT
    I.S. EN 61243-3:2014 LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE
    PREN 1870-10 : DRAFT 2011 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
    EN 12102-1 : 2017 AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS, PROCESS CHILLERS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS - DETERMINATION OF THE SOUND POWER LEVEL - PART 1: AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS FOR SPACE HEATING AND COOLING, DEHUMIDIFIERS AND PROCESS CHILLERS
    UNE-EN 1870-14:2008 Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines
    UNI EN 12102 : 2014 AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
    UNE-EN 16583:2016 Heat exchangers - Hydronic room fan coils units - Determination of the sound power level
    PREN 12102 : DRAFT 2012 AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
    08/30178810 DC : DRAFT MAY 2008 BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
    BS EN 691-1 : 2012 SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
    08/30178378 DC : 0 BS EN 1218-3:2001/A1 - SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
    DIN EN 15572 E : 2015 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
    12/30265270 DC : 0 BS EN 1870-6 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
    10/30232425 DC : DRAFT DEC 2010 BS EN 1870-15 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
    DIN EN 71-1:2015-02 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
    UNI EN 12012-1 : 2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
    UNI EN 13141-7 : 2011 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 7: PERFORMANCE TESTING OF A MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR SINGLE FAMILY DWELLINGS
    DIN EN 1870-4:2012-06 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
    I.S. EN 12012-1:2007 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
    I.S. EN 62075:2012 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 62075:2012 (EQV))
    I.S. EN 71-1:2014 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
    I.S. HD 483.5 S2:1995 SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS
    NF EN 13141-7 : 2011 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 7: PERFORMANCE TESTING OF A MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR SINGLE FAMILY DWELLINGS
    I.S. EN 1870-6:2017 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIRE WOOD
    DIN EN 1870-11:2014-02 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
    DIN EN 12750:2013-05 Safety of woodworking machines - Four sided moulding machines
    DIN EN 1870-17:2015-06 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
    DIN EN 1870-15:2013-01 Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
    DIN EN 1807:2010-02 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
    DIN EN 12354-5:2009-10 BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT
    DIN EN 1870-14:2012-06 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
    DIN EN 1870-13:2013-07 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
    DIN EN 1870-10:2013-07 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
    DIN EN 13141-8:2014-09 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 8: PERFORMANCE TESTING OF UN-DUCTED MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR A SINGLE ROOM
    DIN EN 1870-8:2013-03 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
    DIN EN 1218-1:2010-02 Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table (includes Amendment A1:2009)
    DIN EN 1870-7:2013-01 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
    DIN EN 1870-12:2014-03 Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines
    DIN EN 15036-1:2006-12 Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 1: Airborne noise emissions from heat generators
    DIN EN 1870-16:2013-01 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
    DIN EN 13141-6:2015-02 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 6: EXHAUST VENTILATION SYSTEM PACKAGES USED IN A SINGLE DWELLING
    DIN EN 1870-9:2013-01 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
    DIN EN 1870-3:2015-02 Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
    DIN EN 1218-2:2009-10 Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains (includes Amendment A1:2009)
    DIN EN 1218-5:2010-02 Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain (includes Amendment A1:2009)
    DIN EN 940:2012-05 SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
    DIN EN 861:2012-09 SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
    DIN EN 859:2012-09 SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
    DIN EN 1870-1:2009-08 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
    DIN EN 848-3:2013-01 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
    DIN EN 860:2012-09 SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
    DIN EN 848-1:2013-01 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
    DIN EN 848-2:2013-01 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
    I.S. EN 861:2007 SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
    UNE-EN 1870-4:2012 Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading
    BS EN 859 : 2007 SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
    UNE-EN 1870-7:2013 Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
    UNE-EN 13141-8:2015 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room
    BS EN 1870-8 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
    BS EN 1218-1 : 1999 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
    UNE-EN 13141-7:2011 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 7: Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings
    BS EN 1870-16 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
    BS EN 848-3 : 2012 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
    BS EN 15036-1 : 2006 HEATING BOILERS - TEST REGULATIONS FOR AIRBORNE NOISE EMISSIONS FROM HEAT GENERATORS - PART 1: AIRBORNE NOISE EMISSIONS FROM HEAT GENERATORS
    BS EN 1870-12 : 2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
    BS EN 848-1 : 2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
    BS EN 1218-2 : 2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
    BS EN 861 : 2007 SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
    BS EN 1870-7 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
    BS EN 940 : 2009 SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
    UNE-EN 1870-10:2013 Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
    BS EN 1870-9 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
    BS EN 1870-15 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
    BS EN 1870-10 : 2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
    I.S. EN 859:2007 SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANNING MACHINES
    BS EN 13141-7:2010 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 7: PERFORMANCE TESTING OF A MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR SINGLE FAMILY DWELLINGS
    I.S. EN 860:2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
    BS EN 1870-14 : 2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
    BS EN 13141-6:2014 (published 2015-02) Ventilation for buildings. Performance testing of components/products for residential ventilation Exhaust ventilation system packages used in a single dwelling
    BS EN 1870-17 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
    BS EN 1218-3 : 2001 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
    BS EN 1870-1 : 2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
    BS EN 1218-4 : 2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
    UNE-EN 1870-15:2013 Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
    BS EN 1807 : 1999 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
    BS EN 1870-3 : 2014 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
    UNE-EN 12750:2013 Safety of woodworking machines - Four sided moulding machines
    BS EN 12354-5 : 2009 BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT
    BS EN 1218-5 : 2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
    BS EN 12750 : 2013 SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
    BS EN 1870-11 : 2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
    BS EN 1870-4 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
    UNE-EN 860:2007 Safety of woodworking machines - One side thickness planing machines
    BS EN 1870-13 : 2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
    UNE-EN 13141-6:2015 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 6: Exhaust ventilation system packages used in a single dwelling
    UNE-EN 1870-9:2013 Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
    UNE-EN 1870-16:2013 Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting
    BS EN 1870-5 : 2002 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAW BENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
    BS EN 13141-8:2014 Ventilation for buildings. Performance testing of components/products for residential ventilation Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room
    BS EN 860 : 2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
    UNE-EN 1870-8:2013 Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
    BS EN 848-2 : 2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
    UNE-EN 848-1:2008 Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines
    UNE-EN 848-3:2013 Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines
    I.S. EN 848-2:2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
    I.S. EN 1870-8:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
    DIN EN 1218-4:2009-12 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
    I.S. EN 1870-10:2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
    I.S. EN 1218-2:2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
    I.S. EN 1870-11:2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
    DIN EN 1218-3:2009-12 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
    I.S. EN 1870-12:2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
    I.S. EN 1870-9:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSSCUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
    I.S. EN 1870-3:2014 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
    DIN EN 1870-1:1999-07 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
    I.S. EN 13141-8:2014 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 8: PERFORMANCE TESTING OF UN-DUCTED MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR A SINGLE ROOM
    I.S. EN 13141-7:2010 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 7: PERFORMANCE TESTING OF A MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR SINGLE FAMILY DWELLINGS
    EN 16564 : 2014 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
    I.S. EN 12750:2013 SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
    DIN EN 13141-7:2011-01 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 7: Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings
    I.S. EN 1870-17:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
    DIN EN 1807:1999-10 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
    I.S. EN 1870-15:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTIBLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
    I.S. EN 1218-5:2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
    I.S. EN 1218-3:2002 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
    I.S. EN 1870-14:2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
    EN 15571 : 2014 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
    I.S. EN 1218-1:2000 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
    I.S. EN 940:2009 SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
    I.S. EN 1870-7:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
    I.S. EN 1870-4:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
    UNI EN 1218-5 : 2010 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
    I.S. EN 13141-6:2014 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 6: EXHAUST VENTILATION SYSTEM PACKAGES USED IN A SINGLE DWELLING
    I.S. EN 1870-16:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V-CUTTING
    EN 61243-3:2014/AC:2015 LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE
    EN 13141-11:2015 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 11: Supply ventilation units
    EN 13141-8:2014 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room
    EN 12102:2013 AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
    EN 60034-9:2005/A1:2007 ROTATING ELECTRICAL MACHINES - PART 9: NOISE LIMITS
    EN 12354-5:2009/AC:2010 BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT
    EN 1218-3:2001+A1:2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
    EN 1807-1 : 2013 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
    EN 61481-1 : 2014 LIVE WORKING - PHASE COMPARATORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. (IEC 61481-1:2014)
    NF EN 1218-1 : 2000 + A1 2009 SAFETY OF WOOD WORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
    EN 1218-4:2004+A2:2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
    UNI EN 1218-1 : 2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
    DIN EN 12102:2013-10 AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
    EN 62075:2012/AC:2013 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 62075:2012)
    EN 13141-6:2014 (edition 2) Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 6: Exhaust ventilation system packages used in a single dwelling
    UNI EN 1218-2 : 2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
    EN 60534-8-1:2005 INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-1: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY AERODYNAMIC FLOW THROUGH CONTROL VALVES
    NF EN 1218-5 : 2004 + A1 2010 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FED BY CHAIN
    EN 12750:2013 SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
    DIN EN 12012-1:2010-02 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
    EN 60534-8-2:2011 INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-2: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY HYDRODYNAMIC FLOW THROUGH CONTROL VALVES (IEC 60534-8-2:2011)
    EN 691-1 : 2012 SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
    EN 16430-1 : 2014 FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
    EN 1870-16:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
    EN 1870-13:2007+A2:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
    EN 1807:1999+A1:2009 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
    EN 1870-6:2017 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIRE WOOD
    EN 1870-3:2014 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
    EN 1870-18 : 2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
    EN 1870-14:2007+A2:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
    EN 1807-2 : 2013 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
    EN 1870-1:2007+A1:2009 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
    EN 1870-7:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
    EN 1870-19 : 2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
    EN 16583 : 2015 HEAT EXCHANGERS - HYDRONIC ROOM FAN COILS UNITS - DETERMINATION OF THE SOUND POWER LEVEL
    EN 1870-17:2012+A1:2015 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
    EN 859:2007+A2:2012 SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
    EN 861:2007+A2:2012 SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
    EN 940:2009+A1:2012 SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
    EN 848-2 : 2007 COR 2012 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
    EN 1870-8:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
    EN 15572 : 2015 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
    EN 1870-4:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
    EN 848-3:2012 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
    EN 1870-12:2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
    EN 1870-10:2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
    EN 15036-1 : 2006 HEATING BOILERS - TEST REGULATIONS FOR AIRBORNE NOISE EMISSIONS FROM HEAT GENERATORS - PART 1: AIRBORNE NOISE EMISSIONS FROM HEAT GENERATORS
    EN 1870-9:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
    EN 1870-15:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
    UNI EN 12750 : 2013 SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
    UNI EN 1218-3 : 2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 7574-2:1985 Acoustics Statistical methods for determining and verifying stated noise emission values of machinery and equipment Part 2: Methods for stated values for individual machines
    ISO 4871:1996 Acoustics Declaration and verification of noise emission values of machinery and equipment
    IEC 61183:1994 Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters
    ISO 12001:1996 Acoustics Noise emitted by machinery and equipment Rules for the drafting and presentation of a noise test code
    ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
    ISO 3743-2:1994 Acoustics Determination of sound power levels of noise sources using sound pressure Engineering methods for small, movable sources in reverberant fields Part 2: Methods for special reverberation test rooms
    ISO 7574-4:1985 Acoustics Statistical methods for determining and verifying stated noise emission values of machinery and equipment Part 4: Methods for stated values for batches of machines
    ISO/TR 25417:2007 Acoustics Definitions of basic quantities and terms
    ISO 9614-1:1993 Acoustics Determination of sound power levels of noise sources using sound intensity Part 1: Measurement at discrete points
    IEC 60942:2003 Electroacoustics - Sound calibrators
    ISO 26101:2017 Acoustics Test methods for the qualification of free-field environments
    ISO 3747:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering/survey methods for use in situ in a reverberant environment
    ISO 3740:2000 Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards
    ISO 140-3:1995 Acoustics — Measurement of sound insulation in buildings and of building elements — Part 3: Laboratory measurements of airborne sound insulation of building elements
    ISO 9613-1:1993 Acoustics Attenuation of sound during propagation outdoors Part 1: Calculation of the absorption of sound by the atmosphere
    ISO 9614-2:1996 Acoustics Determination of sound power levels of noise sources using sound intensity Part 2: Measurement by scanning
    ISO 7574-1:1985 Acoustics Statistical methods for determining and verifying stated noise emission values of machinery and equipment Part 1: General considerations and definitions
    ISO 80000-8:2007 Quantities and units Part 8: Acoustics
    ISO 3746:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
    ISO 11690-1:1996 Acoustics Recommended practice for the design of low-noise workplaces containing machinery Part 1: Noise control strategies
    ISO 6926:2016 Acoustics Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels
    ISO 9614-3:2002 Acoustics Determination of sound power levels of noise sources using sound intensity Part 3: Precision method for measurement by scanning
    ISO 7574-3:1985 Acoustics Statistical methods for determining and verifying stated noise emission values of machinery and equipment Part 3: Simple (transition) method for stated values for batches of machines
    ISO 3741:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms
    IEC 61260:1995 Electroacoustics - Octave-band and fractional-octave-band filters
    ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
    ISO/IEC Guide 98-3:2008 Uncertainty of measurement Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
    ISO 3743-1:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective