We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
  • EN ISO 4259 : 2006

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    Add to Watchlist
    This Standard has been added successfully to your Watchlist.
    Please visit My Watchlist to see all standards that you are watching.
    Please log in or to add this standard to your Watchlist.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    You need to be logged in to add this standard to your Watchlist.
    Please log in now or create an account to add.
    You already added this Product in the Watchlist.

    PETROLEUM PRODUCTS - DETERMINATION AND APPLICATION OF PRECISION DATA IN RELATION TO METHODS OF TEST

    Available format(s): 

    Superseded date:  01-12-2017

    Language(s): 

    Published date:  12-01-2013

    Publisher:  Comite Europeen de Normalisation

    Add to Watchlist
    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Stages in the planning of an inter-laboratory test
       programme for the determination of the precision of
       a test method
       4.1 General
       4.2 Preparing a draft method of test
       4.3 Planning a pilot programme with at least two
           laboratories
       4.4 Planning the inter-laboratory programme
       4.5 Executing the inter-laboratory programme
    5 Inspection of inter-laboratory results for uniformity
       and for outliers
       5.1 General
       5.2 Transformation of data
       5.3 Tests for outliers
       5.4 Rejection of complete data from a sample
       5.5 Estimating missing or rejected values
       5.6 Rejection test for outlying laboratories
       5.7 Confirmation of selected transformation
    6 Analysis of variance, calculation and expression of
       precision estimates
       6.1 General
       6.2 Analysis of variance
       6.3 Expectation of mean squares and calculation of
           precision estimates
       6.4 Expression of precision estimates of a method of test
    7 Significance of repeatability (r) and reproducibility (R)
       7.1 General
       7.2 Repeatability, r
       7.3 Reproducibility, R
    8 Specifications
       8.1 Aim of specifications
       8.2 Construction of specifications limits in relation
           to precision
    9 Quality control against specifications
       9.1 General
       9.2 Testing margin at the supplier
       9.3 Testing margin at the recipient
    10 Dispute procedure
    Annex A (normative) Determination of number of samples
                          required
    Annex B (informative) Derivation of equation for calculating
                          the number of samples required
    Annex C (normative) Notation and tests
    Annex D (normative) Example results of test for determination
                          of bromine number and statistical tables
    Annex E (normative) Types of dependence and corresponding
                          transformations
    Annex F (normative) Weighted linear regression analysis
    Annex G (normative) Rules for rounding off results
    Annex H (informative) Explanation of equations given in Clause 7
    Annex I (informative) Specifications that relate to a specified
                          degree of criticality
    Bibliography

    Abstract - (Show below) - (Hide below)

    Describes calculation of precision estimates and application to specifications, also contains definitions of relevant statistical terms, procedures for adoption in planning of an inter-laboratory test programme for determination of precision of a test method, calculation method for precision for results of programme and procedure for interpreting laboratory results relating to precision of methods and to limits laid down by specifications.

    General Product Information - (Show below) - (Hide below)

    Committee TC 19
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    UNI EN 15199-3 : 2008 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 3: CRUDE OIL
    I.S. EN 12849:2009 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PENETRATION POWER OF BITUMINOUS EMULSIONS
    I.S. EN 228:2017 AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS
    I.S. EN 15984:2017 PETROLEUM INDUSTRY AND PRODUCTS - DETERMINATION OF COMPOSITION OF REFINERY HEATING GAS AND CALCULATION OF CARBON CONTENT AND CALORIFIC VALUE - GAS CHROMATOGRAPHY METHOD
    I.S. EN 14274:2013 AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL QUALITY - FUEL QUALITY MONITORING SYSTEM (FQMS)
    I.S. EN 14104:2003 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF ACID VALUE
    I.S. EN 16270:2015 AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD
    I.S. EN 14110:2003 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF METHANOL CONTENT
    I.S. EN 14517:2004 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES IN PETROL - MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD
    I.S. EN 15199-2:2006 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 2: HEAVY DISTILLATES AND RESIDUAL FUELS
    I.S. EN 15199-3:2008 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 3: CRUDE OIL
    I.S. EN 14103:2011 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF ESTER AND LINOLENIC ACID METHYL ESTER CONTENTS
    S.R. CEN TS 15293:2011 AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS
    S.R. CEN/TS 15940:2012 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
    I.S. EN 13924:2006 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS
    I.S. EN 15721:2013 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD
    S.R. CEN/TR 15745:2015 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES VIA MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD - ROUND ROBIN RESEARCH REPORT
    I.S. EN 14214:2012 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
    I.S. EN 14023:2010 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR POLYMER MODIFIED BITUMENS
    I.S. EN 15376:2014 AUTOMOTIVE FUELS - ETHANOL AS A BLENDING COMPONENT FOR PETROL - REQUIREMENTS AND TEST METHODS
    I.S. EN 12697-3:2013 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR
    I.S. CWA 15293:2005 AUTOMOTIVE FUELS - ETHANOL E85 - REQUIREMENTS AND TEST METHODS
    I.S. EN 15195:2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER
    I.S. EN 12847:2009 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SETTLING TENDENCY OF BITUMINOUS EMULSIONS
    S.R. CEN/TR 16389:2017 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL AND BLENDS WITH FAME - BACKGROUND TO THE PARAMETERS REQUIRED AND THEIR RESPECTIVE LIMITS AND DETERMINATION
    I.S. EN 12591:2009 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS
    S.R. CWA 15940:2009 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
    I.S. EN 15471:2017 LIQUEFIED PETROLEUM GASES - DETERMINATION OF DISSOLVED RESIDUES - HIGH-TEMPERATURE GRAVIMETRIC METHOD
    I.S. EN 16734:2016 AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS
    I.S. EN 15199-1:2006 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 1: MIDDLE DISTILLATES AND LUBRICATING BASE OILS
    I.S. EN 12848:2009 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF MIXING STABILITY WITH CEMENT OF BITUMINOUS EMULSIONS
    I.S. EN 15751:2014 AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD
    I.S. EN 589:2008 AUTOMOTIVE FUELS - LPG - REQUIREMENTS AND TEST METHODS
    I.S. EN 15940:2016 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
    I.S. EN 15470:2017 LIQUEFIED PETROLEUM GASES - DETERMINATION OF DISSOLVED RESIDUES - HIGH TEMPERATURE GAS CHROMATOGRAPHIC METHOD
    I.S. EN 13924-1:2015 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS
    I.S. EN 590:2013+A1:2017&LC:2017 AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS
    I.S. EN 14213:2003 HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS
    I.S. EN 14112:2016 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST)
    I.S. EN 12846:2002 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF EFFLUX TIME OF BITUMEN EMULSIONS BY THE EFFLUX VISCOMETER
    I.S. EN 14105:2011 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF FREE AND TOTAL GLYCEROL AND MONO-, DI-, TRIGLYCERIDE CONTENTS
    I.S. EN 16709:2015 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
    I.S. EN 12916:2016 PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION
    I.S. EN 116:2015 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD
    I.S. EN 1601:2017 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID)
    BS EN 15199-1:2006 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 1: MIDDLE DISTILLATES AND LUBRICATING BASE OILS
    EN 14214:2012+A1:2014/AC:2014 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
    DIN EN 12766-3:2005-02 Petroleum products and used oils - Determination of PCBs and related products - Part 3: Determination and quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (PCBT) content by gas chromatography (GC) using an electron capture detector (ECD)
    DIN EN 14213:2003-11 HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS
    BS EN 15940:2016+A1:2018 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
    EN 15692 : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD
    I.S. EN 15692:2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD
    I.S. EN 16136:2015 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
    I.S. EN 14078:2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD
    I.S. EN 12662:2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS
    I.S. EN 15492:2012 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD
    EN 15199-4 : 2015 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 4: LIGHT FRACTIONS OF CRUDE OIL
    I.S. EN 15199-4:2015 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 4: LIGHT FRACTIONS OF CRUDE OIL
    I.S. EN 16576:2014 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
    I.S. EN 15484:2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE - POTENTIOMETRIC METHOD
    I.S. EN 15490:2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHE
    I.S. EN 15489:2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER COULOMETRIC TITRATION METHOD
    I.S. EN 14106:2003 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF FREE GLYCEROL CONTENT
    I.S. EN 15779:2009 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>=4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY
    I.S. EN 14107:2003 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF PHOSPHORUS CONTENT BY INDUCTIVELY COUPLED PLASMA (ICP) EMISSION SPECTROMETRY
    I.S. EN 12766-2:2001 PETROLEUM PRODUCTS AND USED OILS - DETERMINATION OF PCBS AND RELATED PRODUCTS - PART 2: CALCULATION OF POLYCHLORINATED BIPHENYL (PCB) CONTENT
    I.S. EN 15691:2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF DRY RESIDUE (INVOLATILE MATERIAL) - GRAVIMETRIC METHOD
    I.S. EN 15491:2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF TOTAL ACIDITY - COLOUR INDICATOR TITRATION METHOD
    I.S. EN 15486:2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF SULFUR CONTENT - ULTRAVIOLET FLUORESCENCE METHOD
    I.S. EN 14111:2003 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF IODINE VALUE
    I.S. EN 14108:2003 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF SODIUM CONTENT BY ATOMIC ABSORPTION SPECTROMETRY
    I.S. EN 12766-3:2005 PETROLEUM PRODUCTS AND USED OILS - DETERMINATION OF PCBS AND RELATED PRODUCTS - PART 3: DETERMINATION AND QUANTIFICATION OF POLYCHLORINATED TERPHENYLS (PCT) AND POLYCHLORINATED BENZYL TOLUENES (PCBT) CONTENT BY GAS CHROMATOGRAPHY (GC) USING AN ELECTRON CAPTURE DETECTOR (ECD)
    I.S. EN 14109:2003 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF POTASSIUM CONTENT BY ATOMIC ABSORPTION SPECTROMETRY
    I.S. EN 15488:2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF COPPER CONTENT - GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRIC METHOD
    I.S. EN 15553:2007 PETROLEUM PRODUCTS AND RELATED MATERIALS - DETERMINATION OF HYDROCARBON TYPES - FLUORESCENT INDICATOR ADSORPTION METHOD
    I.S. EN 14077:2004 PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC HALOGEN CONTENT - OXIDATIVE MICROCOULOMETRIC METHOD
    UNE-EN 15492:2012 Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method
    UNI EN 15692 : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD
    UNE-EN 15471:2017 Liquefied petroleum gases - Determination of dissolved residues - High-temperature gravimetric method
    UNE-EN 12916:2016 Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection
    UNE-EN 14214:2013 Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods
    UNE-EN 16997:2017 Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel- Wavelength dispersive X-ray fluorescence spectrometric method
    UNE-EN 16091:2012 Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method
    UNE-EN 14112:2017 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of oxidation stability (accelerated oxidation test)
    UNE-EN 589:2009 Automotive fuels - LPG - Requirements and test methods
    UNE-EN 14078:2014 Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method
    UNE-EN 15470:2017 Liquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method
    UNE-EN 16144:2012 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method
    DIN EN 14108:2015-06 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of sodium content by atomic absorption spectrometry; German version EN 14108:2003
    DIN EN 15487:2007-11 Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method
    DIN EN 14214:2003-11 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
    DIN EN 14274:2013-05 Automotive fuels - Assessment of petrol and diesel quality - Fuel quality monitoring system (FQMS); German version EN 14274:2013
    DIN EN 15199-3:2008-09 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3: Crude oil
    DIN EN 15486:2007-11 Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method
    UNE-EN 16715:2016 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection
    DIN EN 16423:2014-02 Liquefied petroleum gases - Determination of dissolved residue - Gas chromatographic method using liquid, on-column injection
    DIN EN 14104:2003-10 Fat and oil derivates - Fatty acid methyl esters (FAME) - Determination of acid value
    UNE-EN 1601:2018 Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID)
    UNE-EN 590:2014 Automotive fuels - Diesel - Requirements and test methods
    UNE-EN 16709:2016 Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test methods
    UNE-EN 12697-3:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator
    UNE-EN 15376:2015 Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods
    UNE-EN 116:2015 Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method
    UNE-EN 16934:2018 Automotive fuels and fat and oil derivates - Determination of steryl glycosides in fatty acid methyl esters (FAME) - Method by GC-MS with prior purification by SPE
    UNE-EN 16761-1:2016 Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 1: Method using single column technique
    UNE-EN 15199-4:2015 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil
    UNE-EN 16734:2017 Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods
    UNE-EN 15940:2016 Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods
    UNE-EN 16294:2013 Petroleum products and fat and oil derivatives - Determination of phosphorus content in fatty acid methyl esters (FAME) - Optical emission spectral analysis with inductively coupled plasma (ICP OES)
    UNE-EN 15721:2014 Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method
    UNE-EN 16136:2015 Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method
    UNE-EN 16270:2015 Automotive fuels - Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel - Gas chromatographic method
    UNE-EN 16761-2:2016 Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 2: Method using heart cut technique
    UNE-EN 16329:2013 Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method
    UNE-EN 13924-1:2016 Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens
    UNE-EN 16896:2017 Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter
    UNE-EN 15938:2011 Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity
    UNE-EN 16900:2017 Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods
    DIN EN 14077:2004-03 Petroleum products - Determination of organic halogen content - Oxidative microcoulometric method; German version EN 14077:2003
    UNE-EN 15944:2011 Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES)
    UNE-EN 15751:2014 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method
    DIN EN 590:2017-10 Automotive fuels - Diesel - Requirements and test methods (includes Amendment :2017)
    DIN EN 15199-1:2007-01 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 1: Middle distillates and lubricating base oils
    DIN EN 16715:2015-10 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection
    DIN EN 16091:2012-02 Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method
    DIN EN 15485:2007-11 Ethanol as a blending component for petrol - Determination of sulfur content - Wavelength dispersive X-ray fluorescence spectrometric method
    DIN 51825:2004-06 Lubricants - Lubricating greases K - Classification and requirements
    DIN EN 15553:2007-07 Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method
    UNE-EN 15984:2018 Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method
    DIN EN 14023:2013-04 Bitumen and bituminous binders - Specification framework for polymer modified bitumens
    DIN EN 14865-2:2011-01 Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h (includes Amendment A2:2010)
    DIN EN 14214:2014-06 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
    DIN EN 16476:2014-07 Liquid petroleum products - Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel - Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES)
    DIN EN 15484:2007-11 Ethanol as a blending component for petrol - Determination of inorganic chloride - Potentiometric method
    DIN EN 14105:2011-07 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free and total glycerol and mono-, di-, triglyceride contents
    DIN EN 15837:2010-04 Ethanol as a blending component for petrol - Determination of phosphorus, copper and sulfur content - Direct method by inductively coupled plasma optical emission spectrometry (ICP OES)
    DIN EN 16144:2012-05 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method
    DIN EN 15199-4:2015-12 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil
    DIN EN 15488:2007-11 Ethanol as a blending component for petrol - Determination of copper content - Graphite furnace atomic absorption spectrometric method
    DIN EN 15779:2013-12 Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (
    DIN EN 15199-2:2007-01 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2: Heavy distillates and residual fuels
    DIN EN 589:2012-06 AUTOMOTIVE FUELS - LPG - REQUIREMENTS AND TEST METHODS
    DIN EN 14865-1:2011-01 Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate (includes Amendment A1:2010)
    DIN EN 15944:2011-02 Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES)
    DIN EN 15692:2009-08 Ethanol as a blending component for petrol - Determination of water content - Karl Fischer potentiometric titration method
    DIN EN 15984:2017-10 Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method
    DIN EN 15938:2010-12 Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity
    DIN EN 15490:2007-11 Ethanol as a blending component for petrol - Determination of pHe
    DIN EN 15492:2012-04 Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method
    DIN EN 15489:2007-11 Ethanol as a blending component for petrol - Determination of water content - Karl Fischer coulometric titration method
    DIN EN 12662:1998-10 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS
    DIN EN 15491:2007-11 Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method
    CEN/TR 16885 : 2015 LIQUID PETROLEUM PRODUCTS - INVESTIGATION ON TEST METHOD FOR MEASUREMENT OF THE OXIDATION STABILITY OF DIESEL AND DIESEL/FAME BLENDS BY ACID NUMBER AFTER AGEING
    CEN/TR 15138 : 2005 PETROLEUM PRODUCTS AND OTHER LIQUIDS - GUIDE TO FLASH POINT TESTING
    BS EN 15195:2014 (published 2014-12) Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber
    BS EN 14214:2012 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
    BS EN 15984:2017 (published 2017-09) Petroleum industry and products. Determination of composition of refinery heating gas and calculation of carbon content and calorific value. Gas chromatography method
    EN 14105:2011 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF FREE AND TOTAL GLYCEROL AND MONO-, DI-, TRIGLYCERIDE CONTENTS
    EN 12916:2016 PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION
    BS EN 12847:2002 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SETTLING TENDENCY OF BITUMINOUS EMULSIONS
    BS EN 16906:2017 Liquid petroleum products. Determination of the ignition quality of diesel fuels. BASF engine method
    EN 12846 : 2002 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF EFFLUX TIME OF BITUMEN EMULSIONS BY THE EFFLUX VISCOMETER METHOD
    BS EN 16896:2016 Petroleum products and related products. Determination of kinematic viscosity. Method by Stabinger type viscosimeter
    CEN/TR 15139 : 2005 PETROLEUM PRODUCTS AND OTHER LIQUIDS - APPLICABILITY OF TEST METHODS ON SULFUR DETERMINATION IN PETROL AND DIESEL FUEL
    DIN EN 16135:2012-02 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    EN 15984:2017 PETROLEUM INDUSTRY AND PRODUCTS - DETERMINATION OF COMPOSITION OF REFINERY HEATING GAS AND CALCULATION OF CARBON CONTENT AND CALORIFIC VALUE - GAS CHROMATOGRAPHY METHOD
    DIN EN 16294:2013-02 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES)
    DIN EN 16709:2015-12 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
    DIN EN 14833:2005-09 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE HYDROLYTIC STABILITY OF FIRE-RESISTANT PHOSPHATE ESTER FLUIDS
    BS EN 16136:2015 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
    DIN EN 15470:2017-09 LIQUEFIED PETROLEUM GASES - DETERMINATION OF DISSOLVED RESIDUES - HIGH TEMPERATURE GAS CHROMATOGRAPHIC METHOD
    DIN EN 16761-2:2016-02 AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE
    DIN EN 14109:2003-10 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF POTASSIUM CONTENT BY ATOMIC ABSORPTION SPECTROMETRY
    ISO 6245:2001 Petroleum products Determination of ash
    EN 116:2015 DIESEL & DOMESTIC HEATING FUELS - DETERMINATION OF COLD WATER PLUGGING POINT - STEPWISE COOLING BATH METHOD
    DIN EN 14103:2015-05 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF ESTER AND LINOLENIC ACID METHYL ESTER CONTENTS
    EN 12697-3:2013 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR
    BS EN 12916:2016 PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION
    BS EN 14104:2003 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF ACID VALUE
    DIN EN 12848:2009-07 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF MIXING STABILITY WITH CEMENT OF BITUMINOUS EMULSIONS
    EN 12848 : 2009 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF MIXING STABILITY WITH CEMENT OF BITUMINOUS EMULSIONS
    DIN EN 12591:2009-08 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS
    BS EN 1601:2017 (published 2017-09) Liquid petroleum products. Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol. Method by gas chromatography (O-FID)
    BS EN 12697-3 : 2013 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR
    DIN EN 15940:2016-09 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
    BS EN 12591:2009 Bitumen and bituminous binders. Specifications for paving grade bitumens
    BS EN 15199-2:2006 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 2: HEAVY DISTILLATES AND RESIDUAL FUELS
    BS EN 589 : 2008 AUTOMOTIVE FUELS - LPG - REQUIREMENTS AND TEST METHODS
    CR 13839 : 2000 PETROLEUM PRODUCTS - DETERMINATION OF AROMATICITY - [13]C NUCLEAR MAGNETIC RESONANCE (NMR) SPECTROMETRIC METHOD
    DIN EN 1601:2017-10 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID)
    BS EN 14865-2 : 2006 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H
    CR 13840 : 2000 PETROLEUM PRODUCTS - DETERMINATION OF POLYCYCLIC AROMATIC HYDROCARBONS - ULTRAVIOLET (UV) SPECTROMETRIC METHOD
    BS EN 590 : 2013 AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS
    DIN EN 12916:2016-06 PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION
    DIN EN 12662:2014-07 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS
    DIN EN 14106:2003-10 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF FREE GLYCEROL CONTENT
    DIN EN 14111:2003-10 Fat and oil derivatives - Fatty acid methyl esters (FAME) - Determination of iodine value
    EN 12766-2 : 2001 PETROLEUM PRODUCTS AND USED OILS - DETERMINATION OF PCBS AND RELATED PRODUCTS - PART 2: CALCULATION OF POLYCHLORINATED BIPHENYL (PCB) CONTENT
    DIN EN 12697-3:2013-08 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR
    DIN EN 16329:2013-07 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD
    BS EN 14865-1 : 2009 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE
    BS EN 13924-1:2015 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS
    EN 12662:2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS
    DIN EN 15376:2014-12 AUTOMOTIVE FUELS - ETHANOL AS A BLENDING COMPONENT FOR PETROL - REQUIREMENTS AND TEST METHODS
    DIN EN 14078:2004-03 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD
    CEN/TR 15160 : 2005 PETROLEUM AND RELATED PRODUCTS - APPLICABILITY OF DIESEL FUEL TEST METHODS FOR FATTY ACID METHYL ESTERS (FAME) - INFORMATION AND RESULTS ON ROUND ROBIN TESTS
    DIN EN 15751:2014-06 AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD
    DIN EN 13924-2:2014-07 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS
    BS EN 15470:2017 (published 2017-08) Liquefied petroleum gases. Determination of dissolved residues. High temperature Gas chromatographic method
    EN 12766-3:2004/AC:2007 PETROLEUM PRODUCTS AND USED OILS - DETERMINATION OF PCBS AND RELATED PRODUCTS - PART 3: DETERMINATION AND QUANTIFICATION OF POLYCHLORINATED TERPHENYLS (PCT) AND POLYCHLORINATED BENZYL TOLUENES (PCBT) CONTENT BY GAS CHROMATOGRAPHY (GC) USING AN ELECTRON CAPTURE DETECTOR (ECD)
    BS EN 15471:2017 (published 2017-08) Liquefied petroleum gases. Determination of dissolved residues. High-temperature gravimetric method
    EN 12591:2009 (edition 2) Bitumen and bituminous binders - Specifications for paving grade bitumens
    DIN EN 14832:2005-09 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE OXIDATION STABILITY AND CORROSIVITY OF FIRE-RESISTANT PHOSPHATE ESTER FLUIDS
    EN 12847 : 2009 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SETTLING TENDENCY OF BITUMINOUS EMULSIONS
    CEN/TS 15293 : 2011 AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS
    DIN EN 16136:2015-04 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
    BS EN 13075-1:2016 Bitumen and bituminous binders. Determination of breaking behaviour Determination of breaking value of cationic bituminous emulsions, mineral filler method
    DIN EN 16143:2013-05 PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS
    DIN EN 16270:2015-08 AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD
    DIN EN 16761-1:2016-02 AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 1: METHOD USING SINGLE COLUMN TECHNIQUE
    BS EN 15692:2009 Ethanol as a blending component for petrol. Determination of water content. Karl Fischer potentiometric titration method
    BS EN 15553:2007 Petroleum products and related materials. Determination of hydrocarbon types. Fluorescent indicator adsorption method
    DIN EN 14107:2003-10 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF PHOSPHORUS CONTENT BY INDUCTIVELY COUPLED PLASMA (ICP) EMISSION SPECTROMETRY
    DIN EN 15471:2017-09 LIQUEFIED PETROLEUM GASES - DETERMINATION OF DISSOLVED RESIDUES - HIGH-TEMPERATURE GRAVIMETRIC METHOD
    EN 15553 : 2007 PETROLEUM PRODUCTS AND RELATED MATERIALS - DETERMINATION OF HYDROCARBON TYPES - FLUORESCENT INDICATOR ADSORPTION METHOD
    DIN EN 15721:2013-12 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD
    DIN EN 16576:2015-02 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
    BS EN 14103:2011 (published 2011-05) Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of ester and linolenic acid methyl ester contents
    DIN EN 13924-1:2016-02 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS
    BS EN 15199-4:2015 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 4: LIGHT FRACTIONS OF CRUDE OIL
    BS EN 16091:2011 (published 2011-12) Liquid petroleum products. Middle distillates and fatty acid methyl ester (FAME) fuels and blends. Determination of oxidation stability by rapid small scale oxidation method
    BS EN 14110:2003 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF METHANOL CONTENT
    CEN/TR 16389:2017 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL AND BLENDS WITH FAME - BACKGROUND TO THE PARAMETERS REQUIRED AND THEIR RESPECTIVE LIMITS AND DETERMINATION
    DIN EN 16896:2017-02 PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER TYPE VISCOSIMETER
    CEN/TR 16514 : 2013 AUTOMOTIVE FUELS - UNLEADED PETROL CONTAINING MORE THAN 3,7% (M/M) OXYGEN - ROADMAP, TEST METHODS, AND REQUIREMENTS FOR E10+ PETROL
    CEN/TS 15940 : 2012 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
    EN 12849 : 2009 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PENETRATION POWER OF BITUMINOUS EMULSIONS
    DIN EN 12849:2009-07 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PENETRATION POWER OF BITUMINOUS EMULSIONS
    BS EN 14105:2011 (published 2011-05) Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of free and total glycerol and mono-, di-, triglyceride contents
    EN 15491 : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF TOTAL ACIDITY - COLOUR INDICATOR TITRATION METHOD
    BS EN 15491:2007 (published 2007-10) Ethanol as a blending component for petrol. Determination of total acidity. Colour indicator titration method
    CEN/TR 16366 : 2012 LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - ROUND ROBIN REPORT ON APPLICABILITY OF RAPID SMALL SCALE OXIDATION TEST METHOD
    DIN EN 14110:2003-10 FAT AND OIL DERIVATIVES - FATTY ACID METHYLESTERS (FAME) - DETERMINATION OF METHANOL CONTENT
    DIN EN 12847:2009-07 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SETTLING TENDENCY OF BITUMINOUS EMULSIONS
    BS EN 14112:2003 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST)
    DIN EN 16568:2015-03 AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C
    DIN EN 15195:2015-02 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER
    DIN EN ISO 6245:2003-01 PETROLEUM PRODUCTS - DETERMINATION OF ASH
    DIN EN 15691:2009-07 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF DRY RESIDUE (INVOLATILE MATERIAL) - GRAVIMETRIC METHOD
    DIN 51619:2004-02 TESTING OF MINERAL OIL HYDROCARBONS - DETERMINATION OF THE COMPOSITION OF LIQUID PETROLEUM GASES - GAS CHROMATOGRAPHIC ANALYSIS UNDER SPECIAL CONSIDERATION OF 1,3-BUTADIENE WITH MASS FRACTIONS <= 0,1 % (M/M)
    BS EN 15199-3:2008 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 3: CRUDE OIL
    CEN/TR 15745:2015 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES VIA MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD - ROUND ROBIN RESEARCH REPORT
    DIN EN 14078:2014-09 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD
    EN 16294 : 2012 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES)
    EN 16144 : 2012 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - FIXED RANGE INJECTION PERIOD, CONSTANT VOLUME COMBUSTION CHAMBER METHOD
    EN 15489 : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER COULOMETRIC TITRATION METHOD
    EN 14865-1:2009+A1:2010 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE
    BS EN 14111:2003 Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of iodine value
    EN 1601:2017 (edition 2) Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID)
    EN 15199-2 : 2006 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 2: HEAVY DISTILLATES AND RESIDUAL FUELS
    EN 16997:2017 Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel- Wavelength dispersive X-ray fluorescence spectrometric method
    EN 14213:2003/AC:2003 HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS
    BS 2000-508(2013) : 2013 COR 2015 AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL QUALITY - FUEL QUALITY MONITORING SYSTEM (FQMS)
    EN 16270:2015 AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD
    IP 309 : 2016 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD
    EN 15488 : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF COPPER CONTENT - GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRIC METHOD
    BS EN 12848:2009 (published 2009-04) Bitumen and bituminous binders. Determination of mixing stability with cement of bituminous emulsions
    EN 14078:2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD
    EN 15199-3 : 2008 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 3: CRUDE OIL
    EN 14108 : 2003 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF SODIUM CONTENT BY ATOMIC ABSORPTION SPECTROMETRY
    EN 15779:2009+A1:2013 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>= 4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY
    EN 13924:2006/AC:2006 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS
    EN 15490 : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHE
    EN 15486 : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF SULFUR CONTENT - ULTRAVIOLET FLUORESCENCE METHOD
    EN 15470:2017 (edition 2) Liquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method
    EN 14517 : 2004 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES IN PETROL - MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD
    EN 16423 : 2013 LIQUEFIED PETROLEUM GASES - DETERMINATION OF DISSOLVED RESIDUE - GAS CHROMATOGRAPHIC METHOD USING LIQUID, ON-COLUMN INJECTION
    EN 14112:2016 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST)
    EN 14832 : 2005 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE OXIDATION STABILITY AND CORROSIVITY OF FIRE-RESISTANT PHOSPHATE ESTER FLUIDS
    EN 590:2013 AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS
    EN 14109 : 2003 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF POTASSIUM CONTENT BY ATOMIC ABSORPTION SPECTROMETRY
    BS 2000-574(2014) : 2014 AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD
    IP 578 : 2015 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>= 4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY
    EN 16329 : 2013 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD
    EN 15487 : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS CONTENT - AMMONIUM MOLYBDATE SPECTROMETRIC METHOD
    IP 487 : 2009 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PENETRATION POWER OF BITUMINOUS EMULSIONS
    IP 606 : 2016 AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD
    EN 15376:2014 AUTOMOTIVE FUELS - ETHANOL AS A BLENDING COMPONENT FOR PETROL - REQUIREMENTS AND TEST METHODS
    UNI EN 589 : 2013 AUTOMOTIVE FUELS - LPG - REQUIREMENTS AND TEST METHODS
    EN 15471:2017 (edition 2) Liquefied petroleum gases - Determination of dissolved residues - High-temperature gravimetric method
    EN 14023:2010 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR POLYMER MODIFIED BITUMENS
    EN 15199-1 : 2006 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 1: MIDDLE DISTILLATES AND LUBRICATING BASE OILS
    EN 15721:2013 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD
    IP 608 : 2015 DETERMINATION OF MERCURY IN BURNER FUELS DERIVED FROM WASTE MINERAL OILS - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY METHOD
    EN 15751:2014 AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD
    EN 16568 : 2014 Automotive fuels - Blends of Fatty acid methyl ester (FAME) with diesel fuel - Determination of oxidation stability by rapidly accelerated oxidation method at 120 °C
    BS EN 16329:2013 Diesel and domestic heating fuels. Determination of cold filter plugging point. Linear cooling bath method
    EN 15484 : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE - POTENTIOMETRIC METHOD
    EN 15195:2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER
    EN 16761-1 : 2015 AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 1: METHOD USING SINGLE COLUMN TECHNIQUE
    EN 14104 : 2003 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF ACID VALUE
    EN 14274:2013/AC:2013 AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL QUALITY - FUEL QUALITY MONITORING SYSTEM (FQMS)
    EN 13924-1 : 2015 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS
    EN 15938 : 2010 AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) AUTOMOTIVE FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY
    EN 15691 : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF DRY RESIDUE (INVOLATILE MATERIAL) - GRAVIMETRIC METHOD
    EN 589:2008+A1:2012 AUTOMOTIVE FUELS - LPG - REQUIREMENTS AND TEST METHODS
    EN 16136:2015 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
    EN 16143 : 2013 PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS
    EN 14111:2003 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of iodine value
    EN 228:2012+A1:2017 (edition 2) Automotive fuels - Unleaded petrol - Requirements and test methods
    BS EN 15944:2010 Liquid petroleum products. Determination of nickel and vanadium content. Inductively coupled plasma optical emission spectrometry method (ICP OES)
    EN 16091 : 2011 LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD
    EN 15944 : 2010 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY METHOD (ICP OES)
    BS EN 16135:2011 Automotive fuels. Determination of manganese content in unleaded petrol. Flame atomic absorption spectrometric method (FAAS)
    BS EN 16568:2014 Automotive fuels. Blends of Fatty acid methyl ester (FAME) with diesel fuel. Determination of oxidation stability by rapidly accelerated oxidation method at 120 C
    BS EN 16900:2017 (published 2017-03) Fast pyrolysis bio-oils for industrial boilers. Requirements and test methods
    EN 14077 : 2003 PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC HALOGEN CONTENT - OXIDATIVE MICROCOULOMETRIC METHOD
    EN 15837 : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - DIRECT METHOD BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES)
    BS 2000-456(2000) : 2000 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF POTASSIUM IN GASOLINE - ATOMIC ABSORPTION SPECTROMETRY (AAS) METHOD
    IP 508 : 2016 AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL QUALITY - FUEL QUALITY MONITORING SYSTEM (FQMS)
    EN 14106 : 2003 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF FREE GLYCEROL CONTENT
    EN 15485 : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF SULFUR CONTENT - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD
    IP 485 : 2009 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SETTLING TENDENCY OF BITUMINOUS EMULSIONS
    IP 498 : 2015 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER
    EN 14865-2:2006+A2:2010 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H
    BS 2000-129(2003) : 2003 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 129: DETERMINATION OF BROMINE NUMBER - COLOUR INDICATOR TITRATION METHOD
    EN 16715 : 2015 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION
    EN 15492:2012 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD
    EN 16734 : 2016 AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS
    EN 16761-2 : 2015 AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE
    EN 16135 : 2011 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    EI HM 68 : 2011 PROCEDURES FOR BULK LIQUID FATTY ACID METHYL ESTERS (FAME) AND BLENDED BIODIESEL CARGO INSPECTIONS
    IP 615 : 2016 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION
    EN ISO 6245 : 2002 PETROLEUM PRODUCTS - DETERMINATION OF ASH
    EN 13924-2 : 2014 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS
    EN 14107 : 2003 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of phosphorus content by inductively coupled plasma (ICP) emission spectrometry
    EN 14110 : 2003 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF METHANOL CONTENT
    EN 16900:2017 Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods
    EN 16476 : 2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM, POTASSIUM, CALCIUM, PHOSPHORUS, COPPER AND ZINC CONTENTS IN DIESEL FUEL - METHOD VIA INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES)
    EN 14833 : 2005 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE HYDROLYTIC STABILITY OF FIRE-RESISTANT PHOSPHATE ESTER FLUIDS
    EN 16906 : 2017 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD
    EN 14103:2011 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF ESTER AND LINOLENIC ACID METHYL ESTER CONTENTS
    EN 16709:2015/AC:2016 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
    EN 16576 : 2014 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
    BS EN 12849:2009 (published 2009-04) Bitumen and bituminous binders. Determination of penetration power of bituminous emulsions
    EN 17057 : 2018 AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF SATURATED MONOGLYCERIDES CONTENT IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-FID
    UNI EN 15751 : 2014 AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD
    01/105972 DC : DRAFT JULY 2001 BS EN 14023 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR POLYMER MODIFIED BITUMENS
    UNI EN 15938 : 2010 AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) AUTOMOTIVE FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY
    UNI EN 15779 : 2013 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>=4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY
    UNI EN 12847 : 2009 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SETTLING TENDENCY OF BITUMINOUS EMULSIONS
    BS EN 16734 : 2016 AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS
    UNI EN 12848 : 2009 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF MIXING STABILITY WITH CEMENT OF BITUMINOUS EMULSIONS
    UNI EN 14274 : 2013 AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL QUALITY - FUEL QUALITY MONITORING SYSTEM (FQMS)
    UNI EN 15195 : 2015 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER
    UNI EN 14078 : 2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD
    UNI EN 14105 : 2011 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF FREE AND TOTAL GLYCEROL AND MONO-, DI-, TRIGLYCERIDE CONTENTS
    BS EN 16997:2017 Liquid petroleum products. Determination of the sulfur content in Ethanol (E85) automotive fuel. Wavelength dispersive X-ray fluorescence spectrometric method
    UNI EN 12849 : 2009 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PENETRATION POWER OF BITUMINOUS EMULSIONS
    BS EN 16934:2017 (published 2017-09) Automotive fuels and fat and oil derivates, Determination of steryl glycosides in fatty acid methyl esters (FAME). Method by GC-MS with prior purification by SPE
    UNI EN 15492 : 2012 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULPHATE CONTENT - ION CHROMATOGRAPHIC METHOD
    UNI EN 15721 : 2013 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD
    UNI EN 15944 : 2011 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY METHOD (ICP OES)
    UNI EN 14103 : 2011 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF ESTER AND LINOLENIC ACID METHYL ESTER CONTENTS
    BS EN 12662:2014 Liquid petroleum products. Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters
    UNI EN 12662 : 2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS
    UNI EN 12697-3 : 2013 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR
    UNI EN 15837 : 2010 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - DIRECT METHOD BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES)
    UNI EN 14214 : 2014 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
    UNI EN 16423 : 2013 LIQUEFIED PETROLEUM GASES - DETERMINATION OF DISSOLVED RESIDUE - GAS CHROMATOGRAPHIC METHOD USING LIQUID, ON-COLUMN INJECTION
    BS EN ISO 6245:2002 Methods of test for petroleum and its products. BS 2000-4: Determination of ash
    10/30205520 DC : 0 BS EN 16144 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - FIXED RANGE INJECTION PERIOD, CONSTANT VOLUME COMBUSTION CHAMBER METHOD
    UNI EN 12591 : 2009 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 3534-2:2006 Statistics Vocabulary and symbols Part 2: Applied statistics
    ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective