EN ISO 4641:2016
Current
The latest, up-to-date edition.
14-12-2016
European foreword
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Coupling and fittings
6 Materials and construction
7 Dimensions and tolerances
8 Physical properties
9 Frequency of testing
10 Marking
11 Test report/certificate
12 Packaging and storage
Annex A (normative) - Type tests and routine tests
Annex B (informative) - Production tests
Annex C (informative) - Couplings and end fittings
Bibliography
ISO 4641:2016 specifies the minimum requirements for textile-reinforced, smooth-bore rubber water-suction and discharge hoses and hose assemblies.Three types of hoses and hose assemblies are specified according to their operating duty requirements, i.e. their ambient and water temperature ranges:- ambient temperatures: −25 °C to +70 °C;- water temperatures during operation: 0 °C to +70 °C.
Committee |
CEN/TC 218
|
DevelopmentNote |
Supersedes EN 24641. (01/2009)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
UNI EN ISO 4641 : 2011 | Identical |
PN EN ISO 4641 : 2017 | Identical |
NS EN ISO 4641 : 2016 | Identical |
SS-EN ISO 4641:2017 | Identical |
ISO 4641:2016 | Identical |
NF EN ISO 4641 : 2017 | Identical |
NBN EN ISO 4641 : 2011 | Identical |
DIN EN ISO 4641:2017-04 | Identical |
BS EN ISO 4641:2016 | Identical |
DIN EN ISO 4641:2016-07 (Draft) | Identical |
UNI EN ISO 4641:2017 | Identical |
I.S. EN ISO 4641:2016 | Identical |
UNE-EN ISO 4641:2017 | Identical |
SN EN ISO 4641 : 2017 | Identical |
NEN EN ISO 4641 : 2016 | Identical |
10/30234625 DC : 0 | BS EN 14420-1 - HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, SURVEY, DESIGNATION AND TESTING |
DIN EN 14420-1:2013-09 | Hose fittings with clamp units - Part 1: Requirements, types of fixing and connection, designation and testing |
I.S. EN 14420-1:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, TYPES OF FIXING AND CONNECTION, DESIGNATION AND TESTING |
UNI EN 14420-1 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, TYPES OF FIXING AND CONNECTION, DESIGNATION AND TESTING |
BS EN 14420-1:2013 | Hose fittings with clamp units Requirements, types of fixing and connection, designation and testing |
EN 14420-1:2013 | Hose fittings with clamp units - Part 1: Requirements, types of fixing and connection, designation and testing |
PREN 14420-1 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, SURVEY, DESIGNATION AND TESTING |
ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
ISO 10619-3:2011 | Rubber and plastics hoses and tubing Measurement of flexibility and stiffness Part 3: Bending tests at high and low temperatures |
ISO 7233:2016 | Rubber and plastics hoses and hose assemblies Determination of resistance to vacuum |
ISO 8331:2016 | Rubber and plastics hoses and hose assemblies Guidelines for selection, storage, use and maintenance |
ISO 7326:2016 | Rubber and plastics hoses Assessment of ozone resistance under static conditions |
ISO 8330:2007 | Rubber and plastics hoses and hose assemblies Vocabulary |
ISO 10619-1:2011 | Rubber and plastics hoses and tubing Measurement of flexibility and stiffness Part 1: Bending tests at ambient temperature |
ISO 10619-2:2011 | Rubber and plastics hoses and tubing Measurement of flexibility and stiffness Part 2: Bending tests at sub-ambient temperatures |
ISO/TR 17784:2003 | Rubber and plastics hoses and hose assemblies Guide for use by purchasers, assemblers, installers and operating personnel |
ISO 2393:2014 | Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures |
ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
ISO 4671:2007 | Rubber and plastics hoses and hose assemblies Methods of measurement of the dimensions of hoses and the lengths of hose assemblies |
ISO 1402:2009 | Rubber and plastics hoses and hose assemblies Hydrostatic testing |
ISO 1307:2006 | Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses |
ISO 8033:2016 | Rubber and plastics hoses Determination of adhesion between components |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.