EN ISO 683-17:2014
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014)
30-04-2015
29-10-2014
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and designation
5 Information to be supplied by the purchaser
6 Manufacturing process
7 Requirements
8 Inspection
9 Test methods
10 Marking
Annex A (normative) - Supplementary or special
requirements
Annex B (informative) - Designations of the steels
given in Tables 3, 5 and 6 and of comparable
grades covered in various designation systems
Annex C (informative) - Dimensional standards applicable
to products complying with this part of
ISO 683
Bibliography
ISO 683-17:2014 specifies the technical delivery requirements for five groups of wrought ball and roller bearing steels: through-hardening bearing steels (steels with about 1 % C and 1 % to 2 % Cr), case-hardening bearing steels, induction-hardening bearing steels (unalloyed and alloyed), stainless bearing steels, and high-temperature bearing steels.
| Committee |
CEN/TC 459/SC 5
|
| DevelopmentNote |
Supersedes PREN ISO 683-17. (11/2014)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| DS EN ISO 683-17 : 2014 | Identical |
| BS EN ISO 683-17:2014 | Identical |
| UNE-EN ISO 683-17:2015 | Identical |
| NF EN ISO 683-17 : 2015 | Identical |
| PN EN ISO 683-17 : 2015 | Identical |
| UNI EN ISO 683-17 : 2014 | Identical |
| NEN EN ISO 683-17 : 2014 | Identical |
| SN EN ISO 683-17 : 2014 | Identical |
| I.S. EN ISO 683-17:2014 | Identical |
| NBN EN ISO 683-17 : 2014 | Identical |
| NS EN ISO 683-17 : 2014 | Identical |
| DIN EN ISO 683-17:2015-02 | Identical |
| ISO 683-17:2014 | Identical |
| ONORM EN ISO 683-17 : 2015 | Identical |
| BS EN 14420-5:2013 | Hose fittings with clamp units Threaded connections |
| BS EN 13631-4:2002 | Explosives for civil uses. High explosives Determination of sensitiveness to impact of explosives |
| EN 12080:2017 | Railway applications - Axleboxes - Rolling bearings |
| 15/30304304 DC : 0 | BS EN 12080 - RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| PREN 12080 : DRAFT 2015 | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| DIN EN 12080:2015-06 (Draft) | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| BS EN 12080:2017 | Railway applications. Axleboxes. Rolling bearings |
| I.S. EN 14420-5:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
| I.S. EN 12080:2017 | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| DIN EN 13631-4:2002-12 | EXPLOSIVES FOR CIVIL USES - HIGH EXPLOSIVES - PART 4: DETERMINATION OF SENSITIVENESS TO IMPACT OF EXPLOSIVES |
| DIN EN 14420-5:2013-09 | HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
| DIN EN 12080:2017-11 | Railway applications - Axleboxes - Rolling bearings |
| BS 2000-239(2004) : 2004 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-239: DETERMINATION OF THE EXTREME-PRESSURE AND ANTI-WEAR PROPERTIES OF FLUIDS - FOUR BALL METHOD (EUROPEAN CONDITIONS) |
| PREN 13001-3-4 : DRAFT 2016 | CRANES - GENERAL DESIGN - PART 3-4: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - BEARINGS |
| UNI EN 14420-5 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
| 16/30322061 DC : DRAFT MAR 2016 | BS EN 13001-3-4 - CRANES - GENERAL DESIGN - PART 3-4: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - BEARINGS |
| UNE-EN 14420-5:2014 | Hose fittings with clamp units - Part 5: Threaded connections |
| EN 13631-4 : 2002 | EXPLOSIVES FOR CIVIL USES - HIGH EXPLOSIVES - PART 4: DETERMINATION OF SENSITIVENESS TO IMPACT OF EXPLOSIVES |
| EN 14420-5:2013 | Hose fittings with clamp units - Part 5: Threaded connections |
| TR 4661 : 2009 | AEROSPACE SERIES - HINGES, FLIGHT CONTROLS MATERIALS AND SURFACE TREATMENTS |
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| EN 10247:2017 | Micrographic examination of the non-metallic inclusion content of steels using standard pictures |
| ISO 5949:1983 | Tool steels and bearing steels Micrographic method for assessing the distribution of carbides using reference photomicrographs |
| ISO 6929:2013 | Steel products — Vocabulary |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 4967:2013 | Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams |
| SAC GB/T 28417 : 2012 | CARBON BEARING STEEL |
| SAC GB/T 3203 : 1982 | CARBURIZING STEELS FOR BEARING |
| ISO/TS 4949:2016 | Steel names based on letter symbols |
| EN 10027-2:2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
| ISO/TR 9769:1991 | Steel and iron Review of available methods of analysis |
| ISO 642:1999 | Steel — Hardenability test by end quenching (Jominy test) |
| ISO 4969:2015 | Steel Etching method for macroscopic examination |
| ISO 16124:2015 | Steel wire rod — Dimensions and tolerances |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 22034-2:2016 | Steel wire and wire products Part 2: Tolerances on wire dimensions |
| ISO 1035-3:1980 | Hot-rolled steel bars — Part 3: Dimensions of flat bars |
| ISO 1035-4:1982 | Hot-rolled steel bars Part 4: Tolerances |
| ISO 3763:1976 | Wrought steels — Macroscopic methods for assessing the content of non-metallic inclusions |
| ISO 4948-1:1982 | Steels Classification Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition |
| SAC GB/T 18254 : 2002 | HIGH-CARBON CHROMIUM BEARING STEEL |
| EN 10278:1999 | Dimensions and tolerances of bright steel products |
| ISO 3887:2003 | Steels Determination of depth of decarburization |
| ISO 1035-1:1980 | Hot-rolled steel bars — Part 1: Dimensions of round bars |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 1035-2:1980 | Hot-rolled steel bars — Part 2: Dimensions of square bars |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| ISO 4948-2:1981 | Steels Classification Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
| SAC GB/T 3086 : 2008 | HIGH CARBON CHROMIUM STAINLESS BEARING STEELS |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| ISO 9443:1991 | Heat-treatable and alloy steels Surface quality classes for hot-rolled round bars and wire rods Technical delivery conditions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.