Name: EN ISO 8495:2013
Brand: CEN

Metallic materials - Tube - Ring-expanding test (ISO 8495:2013)

Published date

20-11-2013

Publisher

Comite Europeen de Normalisation

Foreword
1 Scope
2 Symbols, designations and units
3 Principle
4 Apparatus
5 Test piece
6 Procedure
7 Test report

ISO 8495:2013 specifies a method for a ring-expanding test on tubes, that is used to reveal defects both on the surfaces and within the tube wall by expanding the test piece using a conical mandrel until fracture occurs. It may be also used to assess the ability of tubes to undergo plastic deformation.The ring-expanding test is applicable to tubes having an outside diameter from 18 mm up to and including 150 mm and a wall thickness from 2 mm up to and including 16 mm.

Committee	CEN/TC 459/SC 10
DevelopmentNote	Supersedes EN 10236 (11/2004)
DocumentType	Standard
PublisherName	Comite Europeen de Normalisation
Status	Current
Supersedes	EN 10236 : 1993

Standards	Relationship
SS-EN ISO 8495:2013	Identical
DIN EN ISO 8495:2014-03	Identical
I.S. EN ISO 8495:2013	Identical
UNE-EN ISO 8495:2014	Identical
BS EN ISO 8495:2013	Identical
ISO 8495:2013	Identical
SN EN ISO 8495 : 2014	Identical
PN EN ISO 8495 : 2014	Identical
UNI EN ISO 8495 : 2014	Identical
NEN EN ISO 8495 : 2013	Identical
NS EN ISO 8495 : 2013	Identical
NF EN ISO 8495 : 2014	Identical
NBN EN ISO 8495 : 2014	Identical

14/30301152 DC : 0	BS EN 12392 - ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT
PREN 12392 : DRAFT 2014	ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT
I.S. EN 10216-2:2013	SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
BS EN 10216-2:2013	Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified elevated temperature properties
I.S. EN 10216-4:2013	SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
EN 12952-2:2011	Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
EN 10253-3:2008	Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
EN 12392:2016	Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment
EN 10217-7:2014	Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
UNI EN 10217-7 : 2014	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
PREN 10253-4 : DRAFT 2017	BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
PREN 10217-4 : DRAFT 2009	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
PREN 10217-3 : DRAFT 2009	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
DIN EN 10216-5:2014-03	Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
DIN EN 10216-2:2014-03	SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
BS EN 10216-4:2013	Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified low temperature properties
I.S. EN 10216-3:2013	SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
I.S. EN 10216-5:2013	SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES
I.S. EN 10217-7:2014	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
I.S. EN 12952-2:2011	WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
I.S. EN 12392:2016	ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT
NF EN 12952-2 : 2011	WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
09/30207511 DC : 0	BS EN 10217-4 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
08/30184300 DC : DRAFT SEP 2008	BS EN 12952-2 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
09/30207505 DC : 0	BS EN 10217-2 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
UNI EN 10216-5 : 2014	SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES
09/30207521 DC : 0	BS EN 10217-7 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
S.R. CWA 15902-2:2009	LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 2: SPECIFICATIONS FOR DESIGN, MANUFACTURE AND FOR USE OF ALUMINIUM AND STEEL TRUSSES AND TOWERS
KTA 3211.1 : 2015	PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS
PREN 10217-7 : DRAFT 2009	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
DIN EN 12392:2016-08	Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment
DIN EN 10216-3:2014-03	SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
UNI EN 10216-2 : 2014	SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
UNE-EN 10216-2:2014	Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
BS EN 10217-7:2014	Welded steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes
UNE-EN 10216-4:2014	Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
UNI EN 12952-2 : 2011	WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
UNI EN 10216-4 : 2014	SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
UNI EN 10216-3 : 2014	SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
EN 10216-5:2013	Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
UNI EN 10253-3 : 2009	BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS
DIN EN 10253-3:2009-02	BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS
16/30322064 DC : DRAFT MAR 2016	BS EN 13001-3-6 - CRANES - GENERAL DESIGN - PART 3-6: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - HYDRAULIC CYLINDERS
NF EN 10253-3 : 2009	BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS
EN 10216-2:2013	Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
DIN EN 10216-4:2014-03	SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
DIN EN 10217-7:2015-01	Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
BS EN 12392:2016	Aluminium and aluminium alloys. Wrought products and cast products. Special requirements for products intended for the production of pressure equipment
BS EN 10216-5:2013	Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes
BS EN 10216-3:2013	Seamless steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes
UNE-EN 12952-2:2012	Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
UNE-EN 10216-3:2014	Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
UNE-EN 10216-5:2014	Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
PREN 10217-2 : DRAFT 2009	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
BS EN 10253-3:2008	Butt-welding pipe fittings Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
09/30207508 DC : 0	BS EN 10217-3 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
I.S. EN 10253-3:2008	BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS
DIN EN 12952-2:2011-10	Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
BS EN 12952-2:2011	Water-tube boilers and auxiliary installations Materials for pressure parts of boilers and accessories
EN 10216-4:2013	Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
EN 10216-3:2013	Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes