EN ISO 9002:1994/AC:1997
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION
Superseded date
01-12-2000
Published date
12-01-2013
Publisher
Committees responsible
National foreword
Foreword
Introduction
Specification
1 Scope
2 Normative reference
3 Definitions
4 Quality system requirements
4.1 Management responsibility
4.2 Quality system
4.3 Contract review
4.4 Design control
4.5 Document and data control
4.6 Purchasing
4.7 Control of customer-supplied product
4.8 Product identification and traceability
4.9 Process control
4.10 Inspection and testing
4.11 Control of inspection, measuring and test
equipment
4.12 Inspection and test status
4.13 Control of nonconforming product
4.14 Corrective and preventive action
4.15 Handling, storage, packaging, preservation and
delivery
4.16 Control of quality records
4.17 Internal quality audits
4.18 Training
4.19 Servicing
4.20 Statistical techniques
Annex
A (informative) Bibliography
Gives the quality requirements in cases where a contract requires a supplier to demonstrate a required level of process control for the supply of a service or product. Applies in contracts when: confidence in product conformance can be reached by satisfactory demonstration of a certain supplier's capabilities in installation and production; the specified requirements for product are as a specification or as an established design. Also covers Quality System Requirements such as Management Responsibility; Quality System; Document Control; Contract Review; Purchasing; Purchaser Supplied Product; Product Identification and Traceability; Process Control; Inspection and Testing; Inspection, Measuring and Test Equipment; Inspection and Test Status; Corrective Action and Training.
| Committee |
CEN/CS
|
| DevelopmentNote |
Formerly EN 29002
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 9002:1994 | Identical |
| UNI EN ISO 9002 : 1994 | Identical |
| NEN EN ISO 9002 : 1994 | Identical |
| I.S. EN ISO 9002:1994 | Identical |
| NBN EN ISO 9002 : 1994 | Identical |
| SN EN ISO 9002 : 94 AC 97 | Identical |
| NF EN ISO 9002 : 1994 | Identical |
| UNE-EN ISO 9002:1994 | Identical |
| NS EN ISO 9002 : 2ED 94 | Identical |
| BS EN ISO 9002:1994 | Identical |
| NFX 50 132 : 1988 | Identical |
| DIN EN ISO 9002:1994-08 | Identical |
| DIN EN ISO 9002 E : 1994 | Identical |
| 99/709740 DC : DRAFT JUN 99 | PREN 10253-2 - BUTT WELDING PIPE FITTINGS - PART 2: WROUGHT CARBON AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| BS EN 45510-3-2:2000 | Guide for the procurement of power station equipment. Boilers Shell boilers - Section 2: Shell boilers |
| I.S. EN 45510-2-5:2002 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS |
| BS EN 45510-2-3:2000 | Guide for the procurement of power station equipment Electrical equipment. Stationary batteries and chargers |
| PD CR 14245:2001 | Guidelines for the application of EN 197-2. Conformity Evaluation |
| 97/711221 DC : DRAFT JUL 1997 | DRAFT STANDARD PREN 12952-1: WATER TUBE BOILERS - PART 1: GENERAL |
| 99/100965 DC : DRAFT FEB 1999 | PREN 13493 - REQUIRED CHARACTERISTICS FOR GEOMEMBRANES AND GEOMEMBRANE-RELATED PRODUCTS USED IN SOLID WASTE STORAGES AND WASTE DISPOSAL SITES |
| BS EN 50207:2001 | Railway applications. Electronic power converters for rolling stock |
| BS EN 45510-6-5:2000 | Guide for the procurement of power station equipment. Turbine auxiliaries Dry cooling systems - Section 5: Dry cooling systems |
| BS EN 60746-1:2003 | Expression of performance of electrochemical analyzers General |
| I.S. EN 1457:1999 | CHIMNEYS - CLAY/CERAMIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 61207-3:2002 | GAS ANALYZERS - EXPRESSION OF PERFORMANCE - PARAMAGNETIC OXYGEN ANALYZERS |
| 13/30277457 DC : 0 | BS EN 1776 - GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
| CEI UNI EN 45510-4-1 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4: BOILER AUXILIARIES - SECTION 1: EQUIPMENT FOR REDUCTION OF DUST EMISSIONS |
| BS EN 60966-1:1999 | Radio frequency and coaxial cable assemblies Generic specification. General requirements and test methods |
| 00/103277 DC : DRAFT APR 2000 | BS EN 13888 - GROUTS FOR TILES - DEFINITIONS AND SPECIFICATIONS |
| 02/104526 DC : DRAFT JULY 2002 | EN 13263-2 - SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
| BS EN 45510-6-6:2000 | Guide for the procurement of power station equipment. Turbine auxiliaries Turbine auxiliaries. Wet and wet/dry cooling towers - Section 6: Wet/dry cooling towers |
| 03/304152 DC : DRAFT MAR 2003 | IEC 61850-10 ED.1.0 - COMMUNICATION NETWORKS AND SYSTEMS IN SUBSTATIONS - PART 10: CONFORMANCE TESTING |
| 07/30162629 DC : 0 | BS ISO 4642-1 - RUBBER AND PLASTICS HOSES, NON-COLLAPSIBLE, FOR FIRE-FIGHTING SERVICE - PART 1: SEMI-RIGID HOSES FOR FIXED SYSTEMS |
| 01/105397 DC : DRAFT JULY 2001 | PREN 1748-1-2 - GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - PART 1-2: BOROSILICATE GLASS - EVALUATION OF CONFORMITY |
| BS EN 61192-1:2003 | Workmanship requirements for soldered electronic assemblies General |
| DIN EN 15644 E : 2009 | TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| DD ENV 1453-2:2001 | Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| DD ENV 197-2:1996 | Cement Conformity evaluation |
| 09/30192323 DC : 0 | BS EN 13637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 45510-4-9:1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-9: BOILER AUXILIARIES - SOOTBLOWERS |
| BS EN 45510-3-3:2000 | Guide for the procurement of power station equipment. Boilers Boilers with fluidized bed firing - Section 3: Boilers with fluidised bed firing |
| 03/318982 DC : DRAFT NOV 2003 | EN 14811-1 - RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - PART 1: GROOVED AND ASSOCIATED CONSTRUCTION |
| I.S. EN 1254-1:1998 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 1: FITTINGS WITH ENDS FOR CAPILLARY SOLDERING OR CAPILLARY BRAZING TO COPPER TUBES |
| CEI UNI EN 45510-3-2 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 3-2: BOILERS - SHELL BOILERS |
| BS EN 61190-1-1:2002 | Attachment materials for electronic assembly Requirements for soldering fluxes for high-quality interconnections in electronics assembly |
| I.S. EN 1254-3:1998 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 3: FITTINGS WITH COMPRESSION ENDS FOR USE WITH PLASTICS PIPES |
| DIN EN 45510-2-7:2003-12 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR |
| PREN 10208-3 : DRAFT 1997 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| CEI EN 50155 : 2008 | RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK |
| I.S. EN 74-2:2008 | COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES |
| CEI UNI EN 45510-5-4 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-4: HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES |
| CEI EN 60746-1 : 2003 | EXPRESSION OF PERFORMANCE OF ELECTROCHEMICAL ANALYZERS - PART 1: GENERAL |
| I.S. EN 61479:2001 | LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL |
| I.S. EN 61192-1:2003 | WORKMANSHIP REQUIREMENTS FOR SOLDERED ELECTRONIC ASSEMBLIES - GENERAL |
| I.S. CLC/TS 61112:2006 | BLANKETS OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES |
| CEI UNI EN 45510-6-4 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-4: TURBINE AUXILIARIES - PUMPS |
| PREN 15650 : DRAFT 2017 | VENTILATION FOR BUILDINGS - FIRE DAMPERS |
| UNI EN 74-2 : 2009 | COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES |
| UNE-EN 74-2:2010 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures |
| I.S. CLC TS 50502:2007 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS |
| EN ISO 14922-2:1999 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 2: Comprehensive quality requirements (ISO 14922-2:1999) |
| DIN EN 12195-2:2001-02 | LOAD RESTRAINT ASSEMBLIES ON ROAD VEHICLES - SAFETY - PART 2: WEB LASHING MADE FROM MAN-MADE FIBRES |
| EN ISO 14922-4:1999 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 4: Elementary quality requirements (ISO 14922-4:1999) |
| DIN EN 1254-1:1998-03 | Copper and copper alloy plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| BS EN 12079:1999 | Offshore containers. Design, construction, testing, inspection and marking |
| BS EN 1826:1997 | Biotechnology. Large-scale process and production. Control procedures for raw materials |
| BS EN 10095 : 1999-07 | HEAT RESISTING STEELS AND NICKEL ALLOYS |
| BS EN 12259-3:2000 | Fixed firefighting systems. Components for sprinkler and water spray systems Dry alarm valve assemblies |
| BS EN 12094-7:2001 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for nozzles for CO2 systems |
| ISO 14922-1:1999 | Thermal spraying Quality requirements of thermally sprayed structures Part 1: Guidance for selection and use |
| BS EN 556-1:2001 | Sterilization of medical devices. Requirements for medical devices to be designated \'STERILE\' Part 1. Requirements for terminally sterilized medical devices |
| BS EN 1169:1999 | Precast concrete products. General rules for factory production control of glass-fibre reinforced cement |
| BS EN 600:1996 | Natural rubber latex male condoms |
| ISO/IEC Guide 62:1996 | General requirements for bodies operating assessment and certification/registration of quality systems |
| BS EN 1254-2:1998 | Copper and copper alloys. Plumbing fittings Fittings with compression ends for use with copper tubes |
| BS EN 877 : 1999 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| BS EN 1619:1997 | Biotechnology. Large-scale process and production. General requirements for management and organization for strain conservation procedures |
| BS EN 12306:1998 | Biotechnology. Guidance for quality control of diagnostic kits used in agriculture, plant and animal pest and disease control and environmental contamination |
| BS EN 12075:1997 | Biotechnology. Large scale process and production. Procedures for fermentation and downstream processes |
| BS EN 45510-4-1:1999 | Guide for the procurement of power station equipment. Boiler auxiliaries Equipment for reduction of dust emissions - Equipment for the reduction of dust emissions |
| BS EN 12195-2:2001 | Load restraint assemblies on road vehicles. Safety Web lashing made from man-made fibres |
| BS EN 866-1:1997 | Biological systems for testing sterilizers and sterilization processes General requirements |
| BS EN 45510-5-1:1998 | Guide for the procurement of power station equipment Steam turbines |
| BS EN 13091:2000 | Biotechnology. Performance criteria for filter elements and filtration assemblies |
| BS EN 681-1:1996 | Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Vulcanized rubber |
| ISO 14922-4:1999 | Thermal spraying Quality requirements of thermally sprayed structures Part 4: Elementary quality requirements |
| BS EN 12259-2:1999 | Fixed firefighting systems. Components for sprinkler and water spray systems Wet alarm valve assemblies |
| BS EN 12094-13:2001 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for check valves and non-return valves |
| BS EN 1592-1:1998 | Aluminium and aluminium alloys. HF seam welded tubes Technical conditions for inspection and delivery |
| BS EN 12259-4:2000 | Fixed firefighting systems. Components for sprinkler and water spray systems Water motor alarms |
| DIN EN 729-1:1994-11 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - PART 1: GUIDELINES FOR SELECTION AND USE |
| DIN EN 729-2:1994-11 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - PART 2: COMPREHENSIVE QUALITY REQUIREMENTS |
| EN 45510-5-2 : 1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-2: GAS TURBINES |
| I.S. EN ISO 14922-3:1999 | THERMAL SPRAYING - QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES - PART 3: STANDARD QUALITY REQUIREMENTS |
| EN 45510-5-3 : 1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - WIND TURBINES |
| EN 45510-5-4:1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-4: HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES |
| EN 61479:2001/A1:2002 | LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL |
| EN 10242:1994/A2:2003 | THREADED PIPE FITTING IN MALLEABLE CAST IRON |
| EN 13311-1:2001 | Biotechnology - Performance criteria for vessels - Part 1: General performance criteria |
| EN 12079 : 1999 | OFFSHORE CONTAINERS - DESIGN, CONSTRUCTION, TESTING, INSPECTION AND MARKING |
| EN 12442-3 : 2000 | ANIMAL TISSUES AND THEIR DERIVATIVES UTILIZED IN THE MANUFACTURE OF MEDICAL DEVICES - PART 3: VALIDATION OF THE ELIMINATION AND/OR INACTIVATION OF VIRUSES AND TRANSMISSIBLE AGENTS |
| EN 12074:2000 | Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes |
| EN 12306:1997 | Biotechnology - Guidance for quality control of diagnostic kits used in agriculture, plant and animal pest and disease control and environmental contamination |
| EN 12195-2:2000 | Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres |
| I.S. EN ISO 14922-2:1999 | THERMAL SPRAYING - QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES - PART 2: COMPREHENSIVE QUALITY REQUIREMENTS |
| EN 45510-4-7 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - BOILER AUXILIARIES - ASH HANDLING PLANT |
| EN 12462:1998 | Biotechnology - Performance criteria for pumps |
| EN 12094-7:2000/A1:2005 | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 7: REQUIREMENTS AND TEST METHODS FOR NOZZLES FOR CO[2] SYSTEMS |
| EN 45510-4-6 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - BOILER AUXILIARIES - FLUE GAS DESULPHURIZATION (DESOX) PLANT |
| EN 1293:1999 | General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers |
| EN 12781:2001 | Wallcoverings - Specification for cork panels |
| EN 1092-2:1997 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges |
| EN 13312-1:2001 | Biotechnology - Performance criteria for piping and instrumentation - Part 1: General performance criteria |
| EN 45510-1 : 1997 | Guide for procurement of power station equipment - Part 1: Common clauses |
| EN 12259-4:2000/A1:2001 | Fixed firefighting systems - Components for sprinkler and water spray systems - Part 4: Water motor alarms |
| EN 12259-3:2000/A2:2005 | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 3: DRY ALARM VALVE ASSEMBLIES |
| EN 45510-6-2 : 1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-2: TURBINE AUXILIARIES - FEEDWATER HEATERS |
| CR ISO 17663 : 2001 | WELDING - GUIDELINES FOR QUALITY REQUIREMENTS FOR HEAT TREATMENT IN CONNECTION WITH WELDING AND ALLIED PROCESSES |
| EN 12890:2000 | Founding - Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores |
| EN 45510-6-4 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-4: TURBINE AUXILIARIES - PUMPS |
| EN 61284:1997 | Overhead lines - Requirements and tests for fittings |
| EN 60746-1:2003 | Expression of performance of electrochemical analyzers - Part 1: General |
| EN 877:1999/A1:2006/AC:2008 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| EN 12109:1999 | Vacuum drainage systems inside buildings |
| EN 12690:1999 | Biotechnology - Performance criteria for shaft seals |
| EN 12763:2000 | Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery |
| ENV 197-2 : 1995 | CEMENT - CONFORMITY EVALUATION |
| EN 45510-4-10 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - BOILER AUXILIARIES - FLUE GAS DENITRIFICATION (DE-NOX) PLANT |
| EN 12094-13:2001/AC:2002 | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 13: REQUIREMENTS AND TEST METHODS FOR CHECK VALVES AND NON-RETURN VALVES |
| EN 12442-2 : 2000 | ANIMAL TISSUES AND THEIR DERIVATIVES UTILIZED IN THE MANUFACTURE OF MEDICAL DEVICES - PART 2: CONTROLS ON SOURCING, COLLECTION AND HANDLING |
| EN 12101-7:2011 | Smoke and heat control systems - Part 7: Smoke duct sections |
| EN 45510-4-1 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - BOILER AUXILIARIES - EQUIPMENT FOR REDUCTION OF DUST EMISSIONS |
| EN 12075:1997 | Biotechnology - Large-scale process and production - Procedures for fermentation and downstream processes |
| I.S. EN ISO 14922-1:1999 | THERMAL SPRAYING - QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES - PART 1: GUIDANCE FOR SELECTION AND USE |
| BS EN 1457:1999 | Chimneys. Clay/ceramic flue liners. Requirements and test methods |
| DEFSTAN 61-3/5(1992) : INTERIM | GENERIC SPECIFICATION FOR BATTERIES, NON RECHARGEABLE, PRIMARY |
| ENV 1452-7:2000 | Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 7: Guidance for the assessment of conformity |
| EN 50207:2000 | Railway applications - Electronic power converters for rolling stock |
| I.S. EN 1492-1:2000 | TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE |
| CEI UNI EN 45510-6-7 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-7: TURBINE AUXILIARIES - MOISTURE SEPARATOR REHEATERS |
| 01/108876 DC : DRAFT DEC 2001 | PREN 1317-5 - ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS, DURABILITY AND EVALUATION OF CONFORMITY |
| 98/109040 DC : DRAFT NOV 1998 | PREN 13362 - REQUIRED CHARACTERISTICS FOR GEOMEMBRANES AND GEOMEMBRANE-RELATED PRODUCTS USED IN THE CONSTRUCTION OF CANALS |
| I.S. EN 45510-2-9:2008 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS |
| I.S. EN 12442-3:2000 | ANIMAL TISSUES AND THEIR DERIVATIVES UTILIZED IN THE MANUFACTURE OF MEDICAL DEVICES - PART 3: VALIDATION OF THE ELIMINATION AND/OR INACTIVATION OF VIRUSES AND TRANSMISSIBLE AGENTS |
| DIN EN 15650 E : 2010 | VENTILATION FOR BUILDINGS - FIRE DAMPERS |
| 06/30150265 DC : 0 | EN 1474-1 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
| CEI UNI EN 45510-1 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT PART 1: COMMON CLAUSES |
| 98/542445 DC : DRAFT JULY 1998 | PREN 45545-1 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
| BS EN 12101-7:2011 | Smoke and heat control systems Smoke duct sections |
| 01/105399 DC : DRAFT JULY 2001 | PREN 14178-2 - GLASS IN BUILDING - BASIC ALKALINE EARTH SILICATE GLASS PRODUCTS - PART 2: EVALUATION OF CONFORMITY |
| UNI EN 15644 : 2009 | TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| 97/101296 DC : DRAFT FEB 1997 | PREN 12737 - PRECAST CONCRETE FLOOR SLATS FOR LIVESTOCK |
| BS EN 45510-2-7:2002 | Guide for the procurement of power station equipment. Electrical equipment Switchgear and controlgear |
| 08/30159342 DC : DRAFT JUNE 2008 | BS EN 12668-2 - NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EXAMINATION EQUIPMENT - PART 2: PROBES |
| 08/30159339 DC : DRAFT JUNE 2008 | BS EN 12668-1 - NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC TESTING EQUIPMENT - PART 1: INSTRUMENTS |
| BS CECC 00114-1:1991 | Rule of procedure 14. Quality assessment procedures Approval of manufacturers and other organizations |
| I.S. EN 61481:2001 | LIVE WORKING - PORTABLE PHASE COMPARATORS FOR VOLTAGES OF 1 KV TO 36 KV A.C. |
| 01/105394 DC : DRAFT JULY 2001 | PREN 13024-2 - THERMALLY TOUGHENED BOROSILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY |
| BS EN 45510-6-4:2000 | Guide for the procurement of power station equipment. Turbine auxiliaries Pumps - Pumps |
| DEFSTAN 59-103(PT2)/1(1993) : INTERIM | EMI/EMP GASKET COMPONENTS - PART 2: GASKET CAPABILITY APPROVAL PROCEDURES |
| 98/123516 DC : DRAFT JULY 1998 | PREN 13121-1 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - ACCEPTANCE CONDITIONS AND USAGE CONDITIONS |
| 02/105004 DC : DRAFT JULY 2002 | PREN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING SANDWICH PANELS - FACTORY MADE PRODUCTS - SPECIFICATION |
| 07/30166915 DC : DRAFT AUG 2007 | BS EN 15714-4 - INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| BS EN 15650:2010 | Ventilation for buildings. Fire dampers |
| UNI CEI EN 45510-2-5 : 2011 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS |
| BS EN 45510-6-9:2000 | Guide for the procurement of power station equipment. Turbine auxiliaries Cooling water systems - Section 9: Cooling water systems |
| 99/100963 DC : DRAFT FEB 1999 | PREN 13491 - REQUIRED CHARACTERISTICS FOR GEOMEMBRANES AND GEOMEMBRANE-RELATED PRODUCTS USED IN TUNNELS AND UNDERGROUND STRUCTURES |
| BS EN 61479:2001 | Live working. Flexible conductor covers (line hoses) of insulating material |
| BS EN 15644:2008 | Traditionally designed prefabricated stairs made of solid wood. Specifications and requirements |
| CEI UNI EN 45510-5-3 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-3: WIND TURBINES |
| CEI UNI EN 45510-6-9 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-9: TURBINE AUXILIARIES - COOLING WATER SYSTEMS |
| CEI UNI EN 45510-2-7 : 2006 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR |
| 99/100964 DC : DRAFT FEB 1999 | PREN 13492 - REQUIRED CHARACTERISTICS FOR GEOMEMBRANES AND GEOMEMBRANE-RELATED PRODUCTS USED IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES OR TRANSFER STATIONS |
| BS EN 45510-2-5:2002 | Guide for the procurement of power station equipment. Electrical equipment Motors |
| I.S. EN 1254-4:1998 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS |
| CEI UNI EN 45510-3-1 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 3-1 - BOILERS - WATER TUBE BOILERS |
| 01/108539 DC : DRAFT NOV 2001 | PREN 572-9 - GLASS IN BUILDING - BASIC SODA LIME SILICATE GLASS - PART 9: EVALUATION OF CONFORMITY |
| CEI UNI EN 45510-2-4 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-4: ELECTRICAL EQUIPMENT - HIGH POWER STATIC CONVERTORS |
| CEI EN 61284 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS |
| CEI UNI EN 45510-2-6 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-6: ELECTRICAL EQUIPMENT - GENERATORS |
| CEI UNI EN 45510-8-1 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 8-1: CONTROL AND INSTRUMENTATION |
| I.S. EN 61189-3:2008 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 3: TEST METHODS FOR INTERCONNECTION STRUCTURES (PRINTED BOARDS) |
| I.S. EN 556-1:2002 | STERILISATION OF MEDICAL DEVICES - REQUIREMENTS FOR MEDICAL DEVICES TO BE DESIGNATED STERILE - PART 1: REQUIREMENTS FOR TERMINALLY STERILISED MEDICAL DEVICES |
| DIN EN 1677-4:2009-03 | COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8 |
| DIN EN 12279:2005-12 | GAS SUPPLY SYSTEMS - GAS PRESSURE REGULATING INSTALLATIONS ON SERVICE LINES - FUNCTIONAL REQUIREMENTS |
| DIN EN 12890 : 2002-05 | FOUNDING - PATTERNS, PATTERN EQUIPMENT AND COREBOXES FOR THE PRODUCTION OF SAND MOULDS AND SAND CORES |
| DIN EN 1677-1:2009-03 | COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8 |
| DIN EN 1677-5:2009-03 | COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4 |
| DIN EN 1492-2:2009-05 | TEXTILE SLINGS - SAFETY - PART 2: ROUNDSLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE |
| BS EN 10242:1995 | Threaded pipe fittings in malleable cast iron |
| BS EN 1758:1998 | Copper and copper alloys. Strip for lead frames |
| BS EN 1174-1:1996 | Sterilization of medical devices. Estimation of the population of micro-organisms on product Requirements |
| BS EN 12884:1999 | Biotechnology. Performance criteria for centrifuges |
| BS EN 12885:1999 | Biotechnology. Performance criteria for cell disrupters |
| BS EN 1254-3:1998 | Copper and copper alloys. Plumbing fittings Fittings with compression ends for use with plastics pipes |
| BS EN 13380:2001 | General requirements for components used for renovation and repair of drain and sewer systems outside buildings |
| BS EN 1492-2 : 2000 | TEXTILE SLINGS - SAFETY - PART 2: ROUNDSLINGS MADE OF MAN-MADE FIBRES, FOR GENERAL PURPOSE USE |
| BS EN 588-1:1997 | Fibre-cement pipes for sewers and drains Pipes, joints and fittings for gravity systems |
| BS EN 1254-4:1998 | Copper and copper alloys. Plumbing fittings Fittings combining other end connections with capillary or compression ends |
| I.S. EN ISO 14922-4:1999 | THERMAL SPRAYING - QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES - PART 4: ELEMENTARY QUALITY REQUIREMENTS |
| I.S. EN 1677-5:2001 | COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4 |
| I.S. EN 1492-2:2000 | TEXTILE SLINGS - SAFETY - PART 2: ROUNDSLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE |
| DIN EN 729-4:1994-11 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - PART 4: ELEMENTARY QUALITY REQUIREMENTS |
| I.S. EN 1677-6:2001 | COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4 |
| I.S. EN 1677-4:2001 | COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8 |
| DIN EN 729-3:1994-11 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - PART 3: STANDARD QUALITY REQUIREMENTS |
| DIN EN 12890:2000-06 | FOUNDING - PATTERNS, PATTERN EQUIPMENT AND CORE BOXES FOR THE PRODUCTION OF SAND MOULDS AND SAND CORES |
| I.S. EN 12781:2001 | WALLCOVERINGS - SPECIFICATION FOR CORK PANELS |
| I.S. EN 1677-1:2000 | COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8 |
| DIN EN 50126 : 2000 COR 2 2011 | RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF DEPENDABILITY, RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) |
| I.S. EN 1092-2:1997 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 2: CAST IRON FLANGES |
| UNI EN 1677-6 : 2009 | COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4 |
| VDE 0682-412 : 2001 AMD 1 2003 | LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C. |
| DIN EN 61243-2 : 2001 AMD 2 2003 | LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C. |
| BS 3704(1996) : 1996 | NATURAL RUBBER LATEX MALE CONDOMS |
| DIN EN 61284 : 1998 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS |
| VDI 4060 Blatt 2:2005-06 | Integrated Management Systems - Guidance for practical implementation - Case studies |
| VDI 4060 Blatt 1:2005-06 | Integrated Management Systems - Guidance for practical implementation - General information |
| VDE 0115-103 : 2000 COR 2 2011 | RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) |
| VDE 0212-1 : 1998 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS |
| DIN V ENV 1452-7:2001-03 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| CEI UNI EN 45510-6-5 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-5: TURBINE AUXILIARIES - DRY COOLING SYSTEMS |
| 14/30291693 DC : 0 | BS ISO 21927-7 - SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCTS SECTIONS |
| BS EN 45510-6-8:2000 | Guide for the procurement of power station equipment. Turbine auxiliaries Cranes - Section 8: Cranes |
| 09/30192320 DC : DRAFT MAY 2009 | BS EN 13633 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED PANIC EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| 02/103295 DC : DRAFT MAY 2002 | PREN 12899-4 - FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 4: FACTORY PRODUCTION CONTROL |
| I.S. EN 12442-2:2000 | ANIMAL TISSUES AND THEIR DERIVATIVES UTILIZED IN THE MANUFACTURE OF MEDICAL DEVICES - PART 2: CONTROLS ON SOURCING, COLLECTION AND HANDLING |
| CEI EN 50090-8 : 2001 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 8: CONFORMITY ASSESSMENT OF PRODUCT |
| 97/109272 DC : DRAFT DEC 1997 | PREN 13063 - CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS OR BLOCKS |
| BS CECC 200025:1998 | Harmonized system of quality assessment for electronic components. Process assessment schedule: printed board assembly facilities |
| BS EN 45510-4-10:2000 | Guide for the procurement of power station equipment. Boiler auxiliaries Flue gas denitrification (De-NOx) plant - Section 10: Flue gas denitrification (De-Nox) plant |
| DD ENV 13459-2:1999 | Road marking. Materials. Quality control Guidelines for preparing quality plans for materials application |
| I.S. ENV 1452-7:2000 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| 02/560165 DC : DRAFT JAN 2002 | BS EN 556-2 - STERILIZATION OF MEDICAL DEVICES - REQUIREMENTS FOR MEDICAL DEVICES TO BE DESIGNATED 'STERILE' - PART 2: REQUIREMENTS FOR ASEPTICALLY PROCESSED MEDICAL DEVICES |
| CEI CECC 200025 : 2000 | PROCESS ASSESSMENT SCHEDULE: PRINTED BOARD ASSEMBLY FACILITIES |
| CEI UNI EN 45510-5-2 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-2: GAS TURBINES |
| 98/711668 DC : DRAFT AUG 98 | PREN 10301 - STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES - INTERNAL COATING FOR THE REDUCTION OF FRICTION FOR CONVEYANCE OF NON CORROSIVE GAS |
| 07/30161334 DC : 0 | BS EN 15644 - TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| BS EN 60746-2:2003 | Expression of performance of electrochemical analyzers pH value |
| 99/712245 DC : DRAFT AUG 1999 | PREN 10080-1 - STEEL FOR CONCRETE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - PART 1: GENERAL REQUIREMENTS |
| 02/712630 DC : DRAFT OCT 2002 | BS EN 14587-1 - RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 1: NEW 220 AND 260 GRADE RAILS IN A FIXED PLANT |
| BS EN 74-2:2008 | Couplers, spigot pins and baseplates for use in falsework and scaffolds Special couplers. Requirements and test procedures |
| EN 1254-3:1998 | Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes |
| UNE-EN 12101-7:2013 | Smoke and heat control systems - Part 7: Smoke duct sections |
| BS EN 45510-4-8:2000 | Guide for the procurement of power station equipment. Boiler auxiliaries Dust handling plant - Section 8: Dust handling |
| 05/30128234 DC : DRAFT FEB 2005 | EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| 04/30110333 DC : DRAFT MAR 2004 | EN 14889-2 - FIBRES FOR CONCRETE - PART 2: POLYMER FIBRES - DEFINITION, SPECIFICATIONS AND CONFORMITY |
| DD ENV 1452-7:2001 | Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| 14/30291624 DC : 0 | BS ISO 21927-8 - SMOKE AND HEAT CONTROL SYSTEMS - PART 8: SMOKE CONTROL DAMPERS |
| BS EN 12101-8:2011 | Smoke and heat control systems Smoke control dampers |
| I.S. EN 1254-2:1998 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 2: FITTINGS WITH COMPRESSION ENDS FOR USE WITH COPPER TUBES |
| I.S. EN 1254-5:1998 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 5: FITTINGS WITH SHORT ENDS FOR CAPILLARY BRAZING TO COPPER TUBES |
| CLC/TS 61111:2006 | Matting of insulating material for electrical purposes |
| 01/105396 DC : DRAFT JULY 2001 | PREN 1096-4 - GLASS IN BUILDING - COATED GLASS - PART 4: EVALUATION OF CONFORMITY |
| 03/102563 DC : 0 | EN 1125 - BUILDING HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| BS 7512:1989 | General criteria for certification bodies operating quality system certification |
| 02/100390 DC : DRAFT JAN 2002 | PREN 450-2 - FLY ASH FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
| 01/705811 DC : 0 | BS 5892-7 - RAILWAY ROLLING STOCK MATERIALS - PART 7: SPECIFICATION FOR CAST WHEELS FOR TRACTION AND TRAILING STOCK |
| 01/705738 DC : DRAFT MAR 2001 | PREN 12927-4 - SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - ROPES - PART 4: END FIXING |
| BS EN 45510-7-2:2000 | Guide for the procurement of power station equipment. Pipework and valves Boiler and high pressure valves - Section 2: Boiler and high pressure valves |
| DD ENV 1401-2:2001 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U) Guidance for assessment of conformity |
| I.S. CLC/TS 61111:2006 | MATTING OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES |
| I.S. EN 45510-2-7:2002 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR |
| CEI UNI EN 45510-6-1 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-1: TURBINE AUXILIARIES - DEAERATORS |
| I.S. ENV 13459-2:1999 | ROAD MARKING MATERIALS - QUALITY CONTROL - PART 2: GUIDELINES FOR PREPARING QUALITY PLANS FOR MATERIALS APPLICATION |
| CEI UNI EN 45510-4-7 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4: BOILER AUXILIARIES - SECTION 7: ASH HANDLING PLANT |
| CEI UNI EN 45510-7-1 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION PLANT, EQUIPMENT AND SYSTEMS - PART 7-1: PIPEWORK AND VALVES - HIGH PRESSURE PIPING SYSTEMS |
| UNI CEI EN 45510-4-10 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - BOILER AUXILIARIES - FLUE GAS DENITRIFICATION (DE-NOX) PLANT |
| S.R. CR 14245:2001 | GUIDELINES FOR THE APPLICATION OF EN 197-2 'CONFORMITY EVALUATION' |
| I.S. EN 12068:1999 | CATHODIC PROTECTION - EXTERNAL ORGANIC COATINGS FOR THE CORROSION PROTECTION OF BURIED OR IMMERSED STEEL PIPELINES USED IN CONJUNCTION WITH CATHODIC PROTECTION - TAPES AND SHRINKABLE MATERIALS |
| I.S. EN 15644:2009 | TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| DIN EN 1492-1:2009-05 | TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE |
| DIN EN 1677-6:2009-03 | COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4 |
| BS EN 681-4:2000 | Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Cast polyurethane sealing elements |
| BS EN 1074-1:2000 | Valves for water supply. Fitness for purpose requirements and appropriate verification tests General requirements |
| BS EN 12022:1999 | Blood-gas exchangers |
| BS EN 46002:1997 | Specification for application of EN ISO 9002 to the manufacture of medical devices |
| BS EN 12442-2:2000 | Animal tissues and their derivatives utilized in the manufacture of medical devices Controls on sourcing, collection and handling |
| I.S. EN 12569:2000 | INDUSTRIAL VALVES - VALVES FOR CHEMICAL AND PETROCHEMICAL PROCESS INDUSTRY - REQUIREMENTS AND TESTS |
| EN 12569:1999/AC:2000 | INDUSTRIAL VALVES - VALVES FOR CHEMICAL AND PETROCHEMICAL PROCESS INDUSTRY - REQUIREMENTS AND TESTS |
| ENV 13459-2 : DRAFT 1999 | ROAD MARKING MATERIALS - QUALITY CONTROL - GUIDELINES FOR PREPARING QUALITY PLANS FOR MATERIALS APPLICATION |
| UNI EN 1677-1 : 2009 | COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8 |
| EN 45510-3-1:1999 | Guide for procurement of power station equipment - Part 3-1: Boilers - Water tube boilers |
| EN 45510-4-1:1999 | Guide for procurement of power station equipment - Part 4: Boiler auxiliaries - Section 1: Equipment for reduction of dust emissions |
| UNI EN 1492-2 : 2009 | TEXTILE SLINGS - SAFETY - PART 2: ROUND SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USES |
| EN 45510-3-2:1999 | Guide for procurement of power station equipment - Part 3-2: Boilers - Shell boilers |
| EN 45510-2-2:1999 | Guide for procurement of power station equipment - Part 2-2: Electrical equipment - Uninterruptible power supplies |
| UNI EN 1677-4 : 2009 | COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8 |
| UNI EN 1654 : 1999 | COPPER AND COPPER ALLOYS - STRIP FOR SPRINGS AND CONNECTORS |
| EN 100114-1 : 1996 | RULE OF PROCEDURE - QUALITY ASSESSMENT PROCEDURES - PART 1: CECC REQUIREMENTS FOR THE APPROVAL OF AN ORGANIZATION |
| EN 50090-8:2000 | Home and Building Electronic Systems (HBES) - Part 8: Conformity assessment of products |
| UNI EN 1652 : 1999 | COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES |
| PD 3542:1991 | The role of standards in company quality management |
| EN 45510-2-6:2000 | Guide for procurement of power station equipment - Part 2-6: Electrical equipment - Generators |
| EN 45510-4-8:1999 | Guide for procurement of power station equipment - Part 4-8: Boiler auxiliaries - Dust handling plant |
| EN 45510-6-5:1999 | Guide for procurement of power station equipment - Part 6-5: Turbine auxiliaries - Dry cooling systems |
| EN 45510-3-3:1999 | Guide for procurement of power station equipment - Part 3-3: Boilers - Boilers with fluidized bed firing |
| EN 45510-4-2:1999 | Guide for procurement of power station equipment - Part 4: Boiler auxiliaries - Section 2: Gas-air, steam-air and gas-gas heaters |
| EN 45510-6-7:1998 | Guide for procurement of power station equipment - Part 6-7: Turbine auxiliaries - Moisture separator reheaters |
| EN 45510-6-8:1999 | Guide for procurement of power station equipment - Part 6-8: Turbine auxiliaries - Cranes |
| EN 45510-6-1:1998 | Guide for procurement of power station equipment - Part 6-1: Turbine auxiliaries - Deaerators |
| EN 45510-6-3:1998 | Guide for procurement of power station equipment - Part 6-3: Turbine auxiliaries - Condenser plant |
| EN 45510-8-1:1998 | Guide for procurement of power station equipment - Part 8-1: Control and instrumentation |
| EN 45510-7-2:1999 | Guide for procurement of power station plant, equipment, and systems - Part 7-2: Pipework and valves - Boiler and high pressure piping valves |
| EN 45510-6-4:1999 | Guide for procurement of power station equipment - Part 6-4: Turbine auxiliaries - Pumps |
| EN 45510-5-1:1998 | Guide for procurement of power station equipment - Part 5-1: Steam turbines |
| EN 45510-4-10:1999 | Guide for procurement of power station equipment - Part 4-10: Boiler auxiliaries - Flue gas denitrification (De-NOx) plant |
| UNI EN 1492-1 : 2009 | TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USES |
| EN 45510-5-4:1998 | Guide for procurement of power station equipment - Part 5-4: Hydraulic turbines, storage pumps and pump-turbines |
| EN 45510-6-9:1999 | Guide for procurement of power station equipment - Part 6-9: Turbine auxiliaries - Cooling water systems |
| EN 45510-5-2:1998 | Guide for procurement of power station equipment - Part 5-2: Gas turbines |
| EN 45510-4-7:1999 | Guide for procurement of power station equipment - Part 4: Boiler auxiliaries - Section 7: Ash handling plant |
| I.S. EN 12279:2000 | GAS SUPPLY SYSTEMS - GAS PRESSURE REGULATING INSTALLATIONS ON SERVICE LINES - FUNCTIONAL REQUIREMENTS |
| EN 45510-4-9:1999 | Guide for procurement of power station equipment - Part 4-9: Boiler auxiliaries - Sootblowers |
| EN 45510-4-3:1999 | Guide for procurement of power station equipment - Part 4: Boiler auxiliaries - Section 3: Draught plant |
| EN 45510-2-9:2008 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS |
| EN 45510-1:1997 | Guide for procurement of power station equipment - Part 1: Common clauses |
| UNI EN 1677-5 : 2009 | COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4 |
| EN 45510-4-6:1999 | Guide for procurement of power station equipment - Part 4: Boiler auxiliaries - Section 6: Flue gas desulphurization (De-SOx) plant |
| EN 45510-5-3:1998 | Guide for procurement of power station equipment - Part 5-3: Wind turbines |
| EN 45510-7-1:1999 | Guide for procurement of power station plant, equipment, and systems - Part 7-1: Pipework and valves - High pressure piping systems |
| EN 45510-6-2:1998 | Guide for procurement of power station equipment - Part 6-2: Turbine auxiliaries - Feedwater heaters |
| CEI UNI EN 45510-3-3 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 3-3: BOILERS - BOILERS WITH FLUIDIZED BED FIRING |
| BS EN 50126 : 1999 | RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) |
| 00/124250 DC : DRAFT NOV 2000 | BS EN 14041 - RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - HEALTH, SAFETY AND ENERGY-SAVING REQUIREMENTS |
| 07/30166912 DC : DRAFT AUG 2007 | BS EN 15714-3 - INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| CEI UNI EN 45510-7-2 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION PLANT, EQUIPMENT AND SYSTEMS - PART 7-2: PIPEWORK AND VALVES - BOILER AND HIGH PRESSURE PIPING VALVES |
| CEI UNI EN 45510-4-3 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-3: BOILER AUXILIARIES - DRAUGHT PLANT |
| 96/205776 DC : DRAFT MAY 1996 | BS CECC 200021 - PROCESS ASSESSMENT SCHEDULE FOR MASS LAMINATION PANELS |
| 99/707161 DC : DRAFT APR 99 | PREN 13480-4 METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION |
| CEI EN 60746-2 : 2003 | EXPRESSION OF PERFORMANCE OF ELECTROCHEMICAL ANALYZERS - PART 2: PH VALUE |
| CEI UNI EN 45510-6-8 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-8: TURBINE AUXILIARIES - CRANES |
| 02/100471 DC : DRAFT JAN 2002 | PREN 14321-2 - GLASS IN BUILDING - THERMALLY TOUGHENED ALKALINE EARTH SILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY |
| CEI UNI EN 45510-4-2 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4: BOILER AUXILIARIES - SECTION 2: GAS-AIR, STEAM-AIR AND GAS-GAS HEATERS |
| CEI EN 60966-1 : 2001 | RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 1: GENERIC SPECIFICATION GENERAL REQUIREMENTS AND TEST METHODS |
| EN 1254-5:1998 | Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes |
| 04/30110330 DC : DRAFT MAR 2004 | EN 14889-1 - FIBRES FOR CONCRETE - PART 1: STEEL FIBRES - DEFINITION, SPECIFICATIONS AND CONFORMITY |
| EN 1254-2:1998 | Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes |
| BS EN 61481:2001 | Live working. Portable phase comparators for use on voltages from 1 kV to 36 kV a.c. |
| 01/105368 DC : DRAFT JULY 2001 | PREN 12337-2 - GLASS IN BUILDING - CHEMICALLY STRENGTHENED SODA LIME SILICATE GLASS - PART 2: EVALUATION OF CONFORMITY |
| CEI UNI EN 45510-6-6 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-6: TURBINE AUXILIARIES - WET AND WET/DRY COOLING TOWERS |
| 98/718745 DC : DRAFT DEC 1998 | PREN 13414-1 - STEEL WIRE ROPE SLINGS - SAFETY - PART 1: WIRE ROPE SLINGS |
| DIN EN 12101-8:2011-08 | Smoke and heat control systems - Part 8: Smoke control dampers |
| BS EN 45510-3-1:2000 | Guide for the procurement of power station equipment. Boilers Water tube boilers - Section 1: Water tube boilers |
| CEI UNI EN 45510-2-5 : 2006 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS |
| 01/704739 DC : DRAFT FEB 2001 | PREN 14125 - UNDERGROUND PIPEWORK FOR PETROL FILLING STATIONS |
| BS CECC 00114-0:1992 | Rule of Procedure 14. Quality assessment procedures An introduction to the types of approval available under the CECC System |
| BS EN 45510-7-1:2000 | Guide for the procurement of power station equipment. Pipework and valves High pressure piping systems - Section 1: High pressure piping systems |
| 99/707166 DC : DRAFT APR 1999 | PREN 764-5 - PRESSURE EQUIPMENT - PART 5: COMPLIANCE AND INSPECTION DOCUMENTATION OF MATERIALS |
| 01/105398 DC : DRAFT JULY 2001 | PREN 1748-2-2 - GLASS IN BUILDING - SPECIAL BASIC PRODUCT - PART 2-2: GLASS CERAMIC - EVALUATION OF CONFORMITY |
| CEI UNI EN 45510-5-1 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-1: STEAM TURBINES |
| BS EN 46003:1999 | Quality systems. Medical devices. Particular requirements for the application of EN ISO 9003 |
| 98/703701 DC : DRAFT JAN 1998 | PREN 12927-8 - SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - ROPES - PART 8: NON-DESTRUCTUVE TESTING |
| BS EN 45510-2-4:2000 | Guide for the procurement of power station equipment Electrical equipment. High power static convertors |
| 01/121060 DC : DRAFT MAR 2001 | PREN 13121-3 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
| 98/542447 DC : DRAFT JULY 1998 | PREN 45545-5 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 5: FIRE SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT INCLUDING THAT OF TROLLEY BUSES, TRACK GUIDED BUSES AND MAGNETIC LEVITATION VEHICLES |
| UNI EN 12101-8 : 2011 | SMOKE AND HEAT CONTROL SYSTEMS - PART 8: SMOKE CONTROL DAMPERS |
| UNI EN 15650 : 2010 | VENTILATION FOR BUILDINGS - FIRE DAMPERS |
| BS 7514:1989 | General criteria for suppliers\' declaration of conformity |
| UNI CEI EN 45510-2-7 : 2011 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR |
| I.S. EN 60746-1:2003 | EXPRESSION OF PERFORMANCE OF ELECTROCHEMICAL ANALYZERS - PART 1: GENERAL |
| I.S. EN ISO 50090-08:2001 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 8: CONFORMITY ASSESSMENT OF PRODUCTS |
| I.S. EN 61192-2:2003 | WORKMANSHIP REQUIREMENTS FOR SOLDERED ELECTRONIC ASSEMBLIES - SURFACE-MOUNT ASSEMBLIES |
| I.S. EN 12101-7:2011 | SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCT SECTIONS |
| CEI UNI EN 45510-6-2 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-2: TURBINE AUXILIARIES - FEEDWATER HEATERS |
| CEI UNI EN 45510-4-8 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-8: BOILER AUXILIARIES - DUST HANDLING PLANT |
| CLC/TS 61112:2006 | Blankets of insulating material for electrical purposes |
| CEI UNI EN 45510-4-10 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-10: BOILER AUXILIARIES - FLUE GAS DENITRIFICATION (DE-NOX) PLANT |
| CEI UNI EN 45510-2-3 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-3: ELECTRICAL EQUIPMENT - STATIONARY BATTERIES AND CHARGERS |
| I.S. CR ISO 17663:2001 | WELDING - GUIDELINES FOR QUALITY REQUIREMENTS FOR HEAT TREATMENT IN CONNECTION WITH WELDING AND ALLIED PROCESSES |
| DIN EN 10242:1995-03 | THREADED PIPE FITTING IN MALLEABLE CAST IRON |
| BS EN 45510-1:1998 | Guide for the procurement of power station equipment Common clauses |
| BS EN 45510-6-7:1998 | Guide for the procurement of power station equipment. Turbine auxiliaries Moisture separator reheaters |
| BS EN ISO 14922-4:1999 | Thermal spraying. Quality requirements of thermally sprayed structures Elementary quality requirements |
| BS EN 45510-4-7:1999 | Guide for the procurement of power station equipment. Boiler auxiliaries Ash handling plant - Ash handling plant |
| BS EN 13311-1:2001 | Biotechnology. Performance criteria for vessels General performance criteria |
| BS EN 10284:2000 | Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems |
| BS EN 1254-5:1998 | Copper and copper alloys. Plumbing fittings Fittings with short ends for capillary brazing to copper tubes |
| BS EN 12890:2000 | Founding. Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores |
| BS EN 805:2000 | Water supply. Requirements for systems and components outside buildings |
| BS EN 12462:1998 | Biotechnology. Performance criteria for pumps |
| BS EN 12763:2000 | Fibre-cement pipes and fittings for discharge systems for buildings. Dimensions and technical terms of delivery |
| BS EN 1677-1 : 2000 | COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8 |
| BS EN 1293:1999 | General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers |
| BS EN 45510-4-6:1999 | Guide for the procurement of power station equipment. Boiler auxiliaries Flue gas desulfurization (De-SO<sub>x</sub>) plant - Flue gas desulphurization (De-SOx) plant |
| BS EN 773:1999 | General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers |
| BS EN 45510-5-2:1998 | Guide for the procurement of power station equipment Gas turbines |
| BS EN 12074:2000 | Welding consumables. Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes |
| UNE-EN 15650:2010 | Ventilation for buildings - Fire dampers |
| BS EN 867-1:1997 | Non-biological systems for use in sterilizers General requirements |
| ISO 14922-2:1999 | Thermal spraying Quality requirements of thermally sprayed structures Part 2: Comprehensive quality requirements |
| BS EN 45510-5-3:1998 | Guide for the procurement of power station equipment Wind turbines |
| BS EN 12781:2001 | Wallcoverings. Specification for cork panels |
| BS EN 12569:1999 | Industrial valves. Valves for chemical and petrochemical process industry. Requirements and tests |
| ISO 14922-3:1999 | Thermal spraying Quality requirements of thermally sprayed structures Part 3: Standard quality requirements |
| BS EN 1065:1999 | Adjustable telescopic steel props. Product specifications, design and assessment by calculation and tests |
| BS EN 45510-8-1:1998 | Guide for the procurement of power station equipment Control and instrumentation |
| BS EN 13095:2000 | Biotechnology. Performance criteria for off-gas systems |
| BS EN 1635:1998 | Bar coding. Test specifications. Bar code symbols |
| BS EN 12442-3:2000 | Animal tissues and their derivatives utilized in the manufacture of medical devices Validation of the elimination and/or inactivation of viruses and transmissible agents |
| BS EN 1677-5 : 2001 | COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4 |
| BS EN ISO 14922-1:1999 | Thermal spraying. Quality requirements of thermally sprayed structures Guidance for selection and use |
| BS EN 45510-6-1:1998 | Guide for the procurement of power station equipment. Turbine auxiliaries Deaerators |
| BS EN 12279:2000 | Gas supply systems. Gas pressure regulating installations on service lines. Functional requirements |
| BS EN 12109:1999 | Vacuum drainage systems inside buildings |
| BS EN 1677-4 : 2000 | COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8 |
| BS EN 45510-4-3:1999 | Guide for the procurement of power station equipment. Boiler auxiliaries Draught plant - Draught plant |
| BS EN 1652:1998 | Copper and copper alloys. Plate, sheet, strip and circles for general purposes |
| BS EN 45510-6-3:1998 | Guide for the procurement of power station equipment. Turbine auxiliaries Condenser plant |
| BS EN ISO 14922-3:1999 | Thermal spraying. Quality requirements of thermally sprayed structures Standard quality requirements |
| BS EN 1654:1998 | Copper and copper alloys. Strip for springs and connectors |
| EN 45510-2-9 : 2008 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS |
| EN 61481:2001/A2:2005 | LIVE WORKING - PORTABLE PHASE COMPARATORS FOR USE ON VOLTAGES FROM 1 KV TO 36 KV A.C. |
| EN 74-2:2008 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures |
| EN 1677-5:2001+A1:2008 | Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4 |
| EN 1758:1997 | Copper and copper alloys - Strip for lead frames |
| EN 773:1999 | General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers |
| EN 1635 : 1997 | BAR CODING - TEST SPECIFICATIONS - BAR CODE SYMBOLS |
| EN 1457:1999/A1:2002/AC:2007 | CHIMNEYS - CLAY/CERAMIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| EN 1677-6:2001+A1:2008 | Components for slings - Safety - Part 6: Links - Grade 4 |
| EN 588-1:1996 | Fibre-cement pipes for sewers and drains - Part 1: Pipes, joints and fittings for gravity systems |
| EN 1652:1997/AC:2003 | COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES |
| EN 1653:1997/A1:2000 | COPPER AND COPPER ALLOYS - PLATE, SHEET AND CIRCLES FOR BOILERS, PRESSURE VESSELS AND HOT WATER STORAGE UNITS |
| EN 1492-2:2000+A1:2008 | Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use |
| EN 15644:2008 | Traditionally designed prefabricated stairs made of solid wood - Specifications and requirements |
| EN 45510-2-5:2002 | Guide for procurement of power station equipment - Part 2-5: Electrical equipment - Motors |
| EN 46002 : 1996 | QUALITY SYSTEMS - MEDICAL DEVICES - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF EN ISO 9002 |
| EN 45510-2-7:2002 | Guide for procurement of power station equipment - Part 2-7: Electrical equipment - Switchgear and controlgear |
| EN 805:2000 | Water supply - Requirements for systems and components outside buildings |
| EN 12322:1999/A1:2001 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - CULTURE MEDIA FOR MICROBIOLOGY - PERFORMANCE CRITERIA FOR CULTURE MEDIA |
| EN 45510-2-4:2000 | Guide for procurement of power station equipment - Part 2-4: Electrical equipment - High power static convertors |
| EN 1677-4:2000+A1:2008 | Components for slings - Safety - Part 4: Links, Grade 8 |
| EN 1655:1997 | Copper and copper alloys - Declarations of conformity |
| EN 1492-1:2000+A1:2008 | Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use |
| EN 1654:1997/AC:2003 | COPPER AND COPPER ALLOYS - STRIP FOR SPRINGS AND CONNECTORS |
| EN 45510-2-3:2000 | Guide for procurement of power station equipment - Part 2-4: Electrical equipment - Stationary batteries and chargers |
| EN 1677-1:2000+A1:2008 | Components for slings - Safety - Part 1: Forged steel components, Grade 8 |
| EN 15650:2010 | Ventilation for buildings - Fire dampers |
| BS EN 50090-8:2001 | Home and building electronic systems (HBES) Conformity assessment of products |
| I.S. EN 12101-8:2011 | SMOKE AND HEAT CONTROL SYSTEMS - PART 8: SMOKE CONTROL DAMPERS |
| 03/102518 DC : 0 | BS EN 13637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED EMERGENCY EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| 05/30131069 DC : DRAFT MAR 2005 | EN 598:2005 - DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 45012:1998 | GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS |
| BS EN 61284:1998 | Overhead lines. Requirements and tests for fittings |
| UNE-EN 12101-8:2015 | Smoke and heat control systems - Part 8: Smoke control dampers |
| CECC 200025 : 1998 | PROCESS ASSESSMENT SCHEDULE: PRINTED BOARD ASSEMBLY FACILITIES |
| DIN EN 100114-1:1996-11 | RULE OF PROCEDURE - QUALITY ASSESSMENT PROCEDURE - PART 1: CECC REQUIREMENTS FOR THE APPROVAL OF AN ORGANIZATION |
| CEI UNI EN 45510-6-3 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-3: TURBINE AUXILIARIES - CONDENSER PLANT |
| BS EN 61189-3:2008 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies Test methods for interconnection structures (printed boards) |
| DIN EN 15644:2009-03 | TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| DIN EN 12101-7:2011-08 | Smoke and heat control systems - Part 7: Smoke duct sections |
| BS EN 61192-2:2003 | Workmanship requirements for soldered electronic assemblies Surface-mount assemblies |
| 03/304144 DC : 0 | IEC 60870-5-6 ED.1.0 - TELECONTROL EQUIPMENT AND SYSTEMS - PART 5-6: TEST PROCEDURES FOR IEC 60870-5 COMPANION STANDARDS |
| CEI UNI EN 45510-4-6 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4: BOILER AUXILIARIES - SECTION 6: FLUE GAS DESULPHURIZATION (DE-SOX) PLANT |
| 03/100997 DC : DRAFT MAR 2003 | BS EN 13022-2 - GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 2: PRODUCT STANDARD FOR ULTRA-VIOLET RESISTANT SEALANT AND STRUCTURAL SEALANT |
| 98/706629 DC : DRAFT APR 98 | PREN 12668-2 - NON-DESTRIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EQUIPMENT - PART 2: PROBES |
| 02/102106 DC : DRAFT MAR 2002 | PREN 13748-2 - TERRAZZO TILES - PART 2: TERRAZZO TILES FOR EXTERIOR USE |
| 17/30296747 DC : 0 | BS EN 15650 - VENTILATION FOR BUILDINGS - FIRE DAMPERS |
| DIN EN 15650:2010-09 | Ventilation for buildings - Fire dampers |
| BS EN 61209:1999 | Maritime navigation and radiocommunication equipment and systems. Integrated bridge systems (IBS). Operational and performance requirements, methods of testing and required test results |
| BS EN 45510-4-9:2000 | Guide for the procurement of power station equipment. Boiler auxiliaries Sootblowers - Section 9: Sootblowers |
| DIN EN 74-2:2009-01 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures |
| EN 1254-4:1998/AC:1999 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS |
| CEI UNI EN 45510-4-9 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-9: BOILER AUXILIARIES - SOOTBLOWERS |
| EN 1254-1:1998 | Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| I.S. EN 60746-2:2003 | EXPRESSION OF PERFORMANCE OF ELECTROCHEMICAL ANALYZERS - PART 2: PH VALUE |
| BS EN 45510-2-6:2000 | Guide for the procurement of power station equipment Electrical equipment - Generators |
| 98/712958 DC : DRAFT AUG 1998 | PREN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| 01/105367 DC : DRAFT JULY 2001 | PREN 14179-2 - HEAT SOAKED THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY |
| 03/100998 DC : DRAFT MAR 2003 | EN 13022-3 - GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 3: ASSEMBLY RULES |
| 03/102562 DC : 0 | EN 179 - BUILDING HARDWARE - EMERGENCY EXIT DEVICES OPERATED BY A LEVER HANDLE OR PUSH PAD, FOR USE ON ESCAPE ROUTES |
| 97/703009 DC : 0 | PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| UNI EN 12101-7 : 2011 | SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCT SECTIONS |
| 06/30151880 DC : 0 | BS EN 15512 - STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN |
| CEI UNI EN 45510-2-2 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-2: ELECTRICAL EQUIPMENT - UNINTERRUPTIBLE POWER SUPPLIES |
| I.S. EN 45510-6-4:2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-4: TURBINE AUXILIARIES - PUMPS |
| I.S. EN 100114-1:1997 | RULE OF PROCEDURE - QUALITY ASSESSMENT PROCEDURES - PART 1: CECC REQUIREMENTS FOR THE APPROVAL OF AN ORGANIZATION |
| I.S. EN 45510-3-2:2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 3-2: BOILERS - SHELL BOILERS |
| I.S. EN 45510-3-1:2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 3-1 - BOILERS - WATER TUBE BOILERS |
| BS EN 61207-3:2002 | Expression of performance of gas analyzers Paramagnetic oxygen analyzers |
| I.S. EN 15650:2010 | VENTILATION FOR BUILDINGS - FIRE DAMPERS |
| EN ISO 14922-1:1999 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 1: Guidance for selection and use (ISO 14922-1:1999) |
| EN ISO 14922-3:1999 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 3: Standard quality requirements (ISO 14922-3:1999) |
| DIN EN 1254-4:1998-03 | Copper and copper alloy plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends |
| BS EN 12690:1999 | Biotechnology. Performance criteria for shaft seals |
| BS EN 45510-4-2:1999 | Guide for the procurement of power station equipment. Boiler auxiliaries Gas-air, steam-air and gas-gas heaters - Gas-air,steam-air and gas-gas heaters |
| BS EN 1492-1 : 2000 | TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE |
| BS EN ISO 14922-2:1999 | Thermal spraying. Quality requirements of thermally sprayed structures Comprehensive quality requirements |
| BS EN 45510-2-2:1999 | Guide for the procurement of power station equipment. Electrical equipment Uninterruptible power supplies - Uninterruptible power supplies for power plants |
| BS EN 45510-5-4:1998 | Guide for the procurement of power station equipment Hydraulic turbines, storage pumps and pump-turbines |
| BS EN 45510-2-9:2008 | Guide for procurement of power station equipment Electrical equipment. Cabling systems |
| BS EN 1254-1:1998 | Copper and copper alloys. Plumbing fittings Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| BS EN 12322:1999 | In vitro diagnostic medical devices. Culture media for microbiology. Performance criteria for culture media |
| BS EN 868-1:1997 | Packaging materials and systems for medical devices which are to be sterilized General requirements and test methods |
| BS EN 10240:1998 | Internal and/or external protective coatings for steel tubes. Specification for hot dip galvanized coatings applied in automatic plants |
| BS EN 13085:2001 | Wallcoverings. Specification for cork rolls |
| BS EN 1653:1998 | Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units |
| BS EN 45510-6-2:1998 | Guide for the procurement of power station equipment. Turbine auxiliaries Feedwater heaters |
| BS EN 1677-6 : 2001 | COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4 |
| EN 10284:2000 | Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems |
| CR 14245:2001 | Guidelines for the application of EN 197-2 "Conformity Evaluation" |
| EN 12259-2:1999/A2:2005 | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 2: WET ALARM VALVE ASSEMBLIES |
| EN 1169:1999 | Precast concrete products - General rules for factory production control of glass-fibre reinforced cement |
| EN 45510-6-8:1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - TURBINE AUXILIARIES - CRANES |
| EN 45510-4-2 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - BOILER AUXILIARIES - GAS-AIR, STEAM AIR AND GAS-GAS HEATERS |
| EN 45510-8-1:1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 8-1: CONTROL AND INSTRUMENTATION |
| EN 45510-7-1 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PIPEWORK AND VALVES - HIGH PRESSURE PIPING SYSTEMS |
| EN 45510-6-5 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - TURBINE AUXILIARIES - DRY COOLING SYSTEMS |
| EN 61192-2:2003 | Workmanship requirements for soldered electronic assemblies - Part 2: Surface-mount assemblies |
| EN 45510-3-2 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 3-2: BOILERS - SHELL BOILERS |
| EN 1074-1:2000 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements |
| EN 13380:2001 | General requirements for components used for renovation and repair of drain and sewer systems outside buildings |
| EN 12068:1998 | Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming - General delivery conditions |
| EN 45510-2-2 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2: ELECTRICAL EQUIPMENT - SECTION 2: UNINTERRUPTIBLE POWER SUPPLIES |
| EN 45510-6-1 : 1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-1: TURBINE AUXILIARIES - DEAERATORS |
| EN 45510-6-7 : 1998 | Guide for procurement of power station equipment - Part 6-7: Turbine auxiliaries - Moisture separator reheaters |
| EN 45510-3-1:1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 3-1 - BOILERS - WATER TUBE BOILERS |
| EN 12101-8:2011 | Smoke and heat control systems - Part 8: Smoke control dampers |
| EN 10095:1999 | Heat resisting steels and nickel alloys |
| EN 45510-7-2 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PIPEWORK AND VALVES - BOILER AND HIGH PRESSURE PIPING VALVES |
| EN 45510-4-8 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - BOILER AUXILIARIES - DUST HANDLING PLANT |
| EN 1065:1998 | Adjustable telescopic steel props - Product specifications, design and assessment by calculation and tests |
| EN 10240:1997 | Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants |
| EN 45510-6-3 : 1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-3: TURBINE AUXILIARIES - CONDENSER PLANT |
| EN 45510-5-1 : 1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-1: STEAM TURBINES |
| EN 45510-6-9:1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - TURBINE AUXILIARIES - COOLING WATER SYSTEMS |
| EN 61192-1:2003 | Workmanship requirements for soldered electronic assemblies - Part 1: General |
| EN 45510-4-9 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-9: BOILER AUXILIARIES - SOOTBLOWERS |
| EN 45510-4-3 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-3: BOILER AUXILIARIES - DRAUGHT PLANT |
| EN 50126 : 1999 | RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) |
| EN 13085:2001 | Wallcoverings - Specification for cork rolls |
| EN 12279:2000/A1:2005 | GAS SUPPLY SYSTEMS - GAS PRESSURE REGULATING INSTALLATIONS ON SERVICE LINES - FUNCTIONAL REQUIREMENTS |
| EN 45510-3-3 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 3-3 - BOILERS - BOILERS WITH FLUIDIZED BED FIRING |
| EN 61207-3:2002 | Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers |
| EN 60746-2:2003 | Expression of performance of electrochemical analyzers - Part 2: pH value |
| EN 61190-1-1:2002 | Attachment materials for electronic assembly - Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly |
| EN 61189-3:2008 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards) |
| ISO 8402:1994 | Quality management and quality assurance — Vocabulary |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.