• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN ISO 9169:2006

Current
Current

The latest, up-to-date edition.

Air quality - Definition and determination of performance characteristics of an automatic measuring system (ISO 9169:2006)
Published date

01-07-2006

Foreword
Introduction
1 Scope
2 Terms and definitions
  2.1 General terms
  2.2 Performance characteristics
3 Symbols and abbreviated terms
4 Terms of reference of the test programme
5 Performance characteristics
  5.1 Basic requirements
  5.2 Performance characteristics under laboratory
       conditions
  5.3 Performance characteristics under field conditions
6 Test methods
  6.1 General requirements
  6.2 Requirements on the testing laboratory
  6.3 Response time and minimum averaging time under
       stable laboratory conditions
  6.4 Repeatability, lack of fit and limit of detection
       under stable laboratory conditions
  6.5 Repeatability of the calibration method specified
       in the terms of reference under stable laboratory
       conditions
  6.6 Drift under stable laboratory conditions
  6.7 Sensitivity coefficients of interferent influence
       quantities under stable laboratory conditions
  6.8 Sensitivity to external influence quantities
       under stable laboratory conditions
  6.9 Standard deviation of paired measurements under
       field conditions
  6.10 Drift under field conditions
  6.11 Availability under field conditions
7 Test report
Annex A (informative) Examples
Bibliography

ISO 9169:2006 provides definitions and specifies methods to determine performance characteristics of an identified automatic air quality measuring system. Tests are carried out under stable laboratory conditions or field conditions. The automatic measuring system is considered as a black box operated according to specified procedures.ISO 9169:2006 applies to measuring systems for which the following information is available: a description of the automatic measuring system providing the result of measurement in the physical unit of the measurand; operating procedures of the automatic measuring system including, where appropriate, the procedures of routine adjustment, routine verification and calibration; terms of reference for the test program specifying the client requirements and test conditions.ISO 9169:2006 applies to measuring systems for which it is possible to apply several reference materials with accepted values with known uncertainty for the measurand, within the range of application.ISO 9169:2006 does not specify the number of automatic measuring systems to be tested.

Committee
CEN/TC 264
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

PD CEN/TR 15983:2010 Stationary source emissions. Guidance on the application of EN 14181:2004
PD CEN/TS 16980-1:2016 Photocatalysis. Continuous flow test methods Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials
UNE 83321:2017 EX Concrete with photocatalytic activity. Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials. Continuous flow test method
I.S. EN 12619:2013 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF TOTAL GASEOUS ORGANIC CARBON - CONTINUOUS FLAME IONISATION DETECTOR METHOD
EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
EN 1948-4:2010+A1:2013 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
CEN/TS 15674:2007 Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
CEN/TR 15983:2010 Stationary source emissions - Guidance on the application of EN 14181:2004
EN 1076:2009 Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods
I.S. EN 15267-4:2017 AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCES
DIN EN 15267-4:2015-08 (Draft) AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCES
PREN 12619 : DRAFT 2011 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF TOTAL GASEOUS ORGANIC CARBON - CONTINUOUS FLAME IONISATION DETECTOR METHOD
I.S. EN 1948-4:2010 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
BS EN 15483:2008 Ambient air quality. Atmospheric measurements near ground with FTIR spectroscopy
11/30238654 DC : 0 BS EN 12619 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF TOTAL GASEOUS ORGANIC CARBON - CONTINUOUS FLAME IONISATION DETECTOR METHOD
14/30303591 DC : 0 BS EN ISO 19694-1 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 1: GENERAL ASPECTS
UNE-EN 15267-4:2018 Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources
S.R. CEN/TS 16980-1:2016 PHOTOCATALYSIS - CONTINUOUS FLOW TEST METHODS - PART 1: DETERMINATION OF THE DEGRADATION OF NITRIC OXIDE (NO) IN THE AIR BY PHOTOCATALYTIC MATERIALS
S.R. CEN/TS 15674:2007 AIR QUALITY - MEASUREMENT OF STATIONARY SOURCE EMISSIONS - GUIDELINES FOR THE ELABORATION OF STANDARDISED METHODS
CEN/TS 16980-1:2016 Photocatalysis - Continuous flow test methods - Part 1: Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials
DIN EN 1076:2010-04 Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods
DIN EN 12619:2013-04 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
DIN EN 15267-3:2008-03 Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources; German version EN 15267-3:2007
VDI 3478 Blatt 1:2011-03 Biological waste gas purification - Bioscrubbers
VDI 3786 Blatt 1:2013-08 Environmental meteorology - Meteorological measurements - Fundamentals
VDI 3783 Blatt 7:2017-05 Environmental meteorology - Prognostic mesoscale wind field models - Evaluation for dynamically and thermally induced flow fields
VDI 3477:2016-03 Biological waste gas purification - Biofilters
VDI 3783 Blatt 9:2017-05 Environmental meteorology - Prognostic microscale wind field models - Evaluation for flow around buildings and obstacles
09/30198710 DC : 0 BS EN 1948-4 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
DIN EN 1948-4:2014-03 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
BS EN 15267-4:2017 Air quality. Certification of automated measuring systems Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources
UNI EN 15483 : 2009 AMBIENT AIR QUALITY - ATMOSPHERIC MEASUREMENTS NEAR GROUND WITH FTIR SPECTROSCOPY
DD CEN/TS 15674:2007 Air quality. Measurement of stationary source emissions. Guidelines for the elaboration of standardised methods
DIN EN 15483 E : 2009 AMBIENT AIR QUALITY - ATMOSPHERIC MEASUREMENTS NEAR GROUND WITH FTIR SPECTROSCOPY
I.S. EN 15483:2008 AMBIENT AIR QUALITY - ATMOSPHERIC MEASUREMENTS NEAR GROUND WITH FTIR SPECTROSCOPY
BS EN 1076:2009 Workplace exposure. Procedures for measuring gases and vapours using pumped samplers. Requirements and test methods
UNI EN 1076 : 2010 WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING PUMPED SAMPLERS - REQUIREMENTS AND TEST METHODS
UNI EN 12619 : 2013 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF TOTAL GASEOUS ORGANIC CARBON - CONTINUOUS FLAME IONISATION DETECTOR METHOD
DIN EN 15483:2009-02 AMBIENT AIR QUALITY - ATMOSPHERIC MEASUREMENTS NEAR GROUND WITH FTIR SPECTROSCOPY
15/30318313 DC : 0 BS EN 15267-4 - AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCE
UNE-EN 1948-4:2011 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
UNE-CEN/TR 15983:2011 IN Stationary source emissions - Guidance on the application of EN 14181:2004
BS EN 12619:2013 Stationary source emissions. Determination of the mass concentration of total gaseous organic carbon. Continuous flame ionisation detector method
UNE-EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
I.S. EN 1076:2009 WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING PUMPED SAMPLERS - REQUIREMENTS AND TEST METHODS
EN 15483:2008 Ambient air quality - Atmospheric measurements near ground with FTIR spectroscopy
EN 15267-4:2017 Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources
EN 15267-3:2007 Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources
DD CEN/TS 1948-4:2007 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs Sampling and analysis of dioxin-like PCBs
BS EN 1948-4 : 2010 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
S.R. CEN TS 1948-4:2007 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
S.R. CEN TR 15983:2010 STATIONARY SOURCE EMISSIONS - GUIDANCE ON THE APPLICATION OF EN 14181:2004
UNI EN 1948-4 : 2014 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
BS EN 15267-3:2007 Air quality. Certification of automated measuring systems Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources
CEN/TS 1948-4:2007 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
I.S. EN 15267-3:2007 AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 3: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR MONITORING EMISSIONS FROM STATIONARY SOURCES

ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
ISO 11843-2:2000 Capability of detection — Part 2: Methodology in the linear calibration case
ISO 11843-1:1997 Capability of detection Part 1: Terms and definitions
ISO 11095:1996 Linear calibration using reference materials

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.