ESD S20.20 : 2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES)
Superseded date
18-12-2021
Published date
12-01-2013
Publisher
1.0 PURPOSE
2.0 SCOPE
3.0 REFERENCED PUBLICATIONS
4.0 DEFINITIONS
5.0 PERSONNEL SAFETY
6.0 ESD CONTROL PROGRAM
6.1 ESD CONTROL PROGRAM REQUIREMENTS
6.2 ESD CONTROL PROGRAM MANAGER OR COORDINATOR
6.3 TAILORING
7.0 ESD CONTROL PROGRAM ADMINISTRATIVE REQUIREMENTS
7.1 ESD CONTROL PROGRAM PLAN
7.2 TRAINING PLAN
7.3 COMPLIANCE VERIFICATION PLAN
8.0 ESD CONTROL PROGRAM PLAN TECHNICAL REQUIREMENTS
8.1 GROUNDING/EQUIPOTENTIAL BONDING SYSTEMS
8.2 PERSONNEL GROUNDING
8.3 ESD PROTECTED AREAS (EPAS)
8.4 PACKAGING
8.5 MARKING
ANNEX A - ADDITIONAL PROCESS CONSIDERATIONS
ANNEX B - ESD SENSITIVITY TESTING
ANNEX C - RELATED DOCUMENTS
Gives administrative and technical requirements for establishing, implementing, and maintaining an ESD Control Program to protect electrical or electronic parts, assemblies, and equipment susceptible to damage by electrostatic discharges greater than or equal to 100 volts HBM, 200 volts CDM, and 35 volts on isolated conductors.
| DevelopmentNote |
Supersedes NASA STD 8739.7. (12/2003)
|
| DocumentType |
Standard
|
| PublisherName |
Electrostatic Discharge Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| IPC ESD 20-20 : 1999 | Identical |
| PD IEC/TS 62668-1:2016 | Process management for avionics. Counterfeit prevention Avoiding the use of counterfeit, fraudulent and recycled electronic components |
| PD IEC/TS 62941:2016 | Terrestrial photovoltaic (PV) modules. Guidelines for increased confidence in PV module design qualification and type approval |
| BS EN 16602-20:2014 | Space product assurance. Quality assurance |
| MIL-HDBK-773 Revision A:2005 | ELECTROSTATIC DISCHARGE PROTECTIVE PACKAGING |
| MIL-STD-130 Revision N:2007 | IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY |
| SAE AS 6171/11 : 2016 | TECHNIQUES FOR SUSPECT/COUNTERFEIT EEE PARTS DETECTION BY DESIGN RECOVERY TEST METHODS |
| SAE AS 6081 : 2012 | FRAUDULENT/COUNTERFEIT ELECTRONIC PARTS: AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION - DISTRIBUTORS |
| SAE AS 12500 : 2018 | CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES |
| NASA-STD-8739.12:2018 | METROLOGY & CALIBRATION |
| ASTM E 1549/E1549M : 2013 | Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations |
| IPC AJ 820 : A | ASSEMBLY AND JOINING HANDBOOK |
| IPC J STD 001 SWEDISH : E | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC A 610 DANISH : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC J STD 001 RUSSIAN : E | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC A 610 SPANISH : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC WHMA A 620 HUNGARIAN : B | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| IPC J STD 001 TURKISH : E2010 | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC J STD 001 POLISH : E | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC A 610 ROMANIAN : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC WHMA A 620 TURKISH : B2012 AMD 1 2013 | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| IPC 2221 GERMAN : B | GENERIC STANDARD ON PRINTED BOARD DESIGN |
| IPC 1601 GERMAN : - | PRINTED BOARD HANDLING AND STORAGE GUIDELINES |
| IPC WHMA A 620 HEBREW : B2012 AMD 1 2013 | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| IPC A 610 CZECH : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC A 610 GERMAN : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC A 610 HINDI : E2010 | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC A 610 ESTONIAN : E2010 | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC A 610 POLISH : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC WHMA A 620 SPANISH : B | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| IPC WHMA A 620 CHINESE : B | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| IPC A 610 DUTCH : F2014 | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC WHMA A 620 VIETNAMESE : B2012 | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| IPC A 610 KOREAN : F2014 | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC A 610 ITALIAN : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC A 610 FRENCH : F | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC J STD 001 HUNGARIAN : E | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC A 610 SWEDISH : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC J STD 001 GERMAN : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC A 610 HUNGARIAN : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC WHMA A 620 POLISH : B | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| A-A-58047 Revision D:2016 | SIGNAL GENERATOR |
| IPC A 610 CHINESE : F | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC A 610 TURKISH : E2010 | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| IPC J STD 001 ROMANIAN : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC A 610 JAPANESE : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC J STD 001 DANISH : E | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC A 610 RUSSIAN : D | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC A 610 VIETNAMESE : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC WHMA A 620 ESTONIAN : B2012 AMD 1 2013 | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| IPC WHMA A 620 KOREAN : B2012 AMD 1 2013 | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| NASA HDBK 8739.21 : 2010 | WORKMANSHIP MANUAL FOR ELECTROSTATIC DISCHARGE CONTROL (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES) |
| SAE AS 6171/7 : 2016 | TECHNIQUES FOR SUSPECT/COUNTERFEIT EEE PARTS DETECTION BY ELECTRICAL TEST METHODS |
| SAE AS 6171/8 : 2016 | TECHNIQUES FOR SUSPECT/COUNTERFEIT EEE PARTS DETECTION BY RAMAN SPECTROSCOPY TEST METHODS |
| A-A-59701-2 Revision A:2006 | WRIST STRAP, DUAL CONDUCTOR, METAL, ELECTROSTATIC DISCHARGE WITH OPTIONAL GROUNDING CORD |
| IEC TS 62941:2016 | Terrestrial photovoltaic (PV) modules - Guideline for increased confidence in PV module design qualification and type approval |
| ARINC 606A : 2004 | GUIDANCE FOR ELECTROSTATIC SENSITIVE DEVICE UTILIZATION AND PROTECTION |
| AAMI TIR18:2010 | GUIDANCE ON ELECTROMAGNETIC COMPATIBILITY OF MEDICAL DEVICES IN HEALTHCARE FACILITIES |
| IPC J STD 001 CHINESE : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC J STD 001 SPANISH : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC J STD 001 FRENCH : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC WHMA A 620 DANISH : B | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| A-A-59701-1 Revision A:2006 | WRIST STRAP, SINGLE CONDUCTOR, METAL, ELECTROSTATIC DISCHARGE WITH OPTIONAL COILED GROUNDING CORD |
| MIL-STD-464 Revision C:2010 | ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS |
| A-A-59701-4 Revision A:2006 | WRIST STRAP, DUAL CONDUCTOR, ADJUSTABLE, THERMOPLASTIC, ELECTROSTATIC DISCHARGE |
| SAE ARP 6178 : 2011 | FRAUDULENT/COUNTERFEIT ELECTRONIC PARTS - TOOL FOR RISK ASSESSMENT OF DISTRIBUTORS |
| ASTM E 1549/E1549M : 2013 : R2016 | Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations |
| NASA MSFC STD 2905 : 2006 | MSFC TAILORING GUIDE FOR NASA-STD-8739.4, CRIMPING, INTERCONNECTING CABLES, HARNESS, AND WIRING |
| ASTM E 1161 : 2009 : R2014 | Standard Practice for Radiologic Examination of Semiconductors and Electronic Components |
| NASA MSFC STD 2904 : 2006 | MSFC TAILORING GUIDE FOR NASA-STD-8739.2, WORKMANSHIP STANDARD FOR SURFACE MOUNT TECHNOLOGY |
| NASA STD 8739.3 : 1998 | SOLDERED ELECTRICAL CONNECTIONS |
| NASA MSFC STD 2903 : 2006 | MSFC TAILORING GUIDE FOR NASA-STD-8739.3, SOLDERED ELECTRICAL CONNECTIONS |
| NASA STD 8739.6 : 2016 | IMPLEMENTATION REQUIREMENTS FOR NASA WORKMANSHIP STANDARDS |
| NASA STD 5005 : 2013 | STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| NASA MSFC STD 2906 : 2006 | MSFC TAILORING GUIDE FOR NASA-STD-8739.1, WORKMANSHIP STANDARD FOR STAKING AND CONFORMAL COATING OF PRINTED WIRING BOARDS AND ELECTRONIC ASSEMBLIES |
| NASA STD 5005(INT) : 2007 | THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| NASA KSC STD E 0022 : 2013 | BONDING, GROUNDING, SHIELDING, ELECTROMAGNETIC INTERFERENCE, LIGHTNING AND TRANSIENT PROTECTION, DESIGN REQUIREMENTS FOR GROUND SYSTEMS |
| NASA JSC 66552 : 2013 | ELECTROSTATIC DISCHARGE CONTROL REQUIREMENTS FOR THE PROTECTION OF ELECTRONIC COMPONENTS AND ASSEMBLIES |
| NASA KSC DE 512-SM : 2012 | FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
| NASA JSC 08080-2 : 2015 | JSC DESIGN AND PROCEDURAL STANDARDS |
| NASA MSFC RQMT 2918 : 2015 | REQUIREMENTS FOR ELECTROSTATIC DISCHARGE CONTROL |
| EIA STD 4899 : 2017-05 | REQUIREMENTS FOR AN ELECTRONIC COMPONENTS MANAGEMENT PLAN |
| NASA MSFC STD 3012 : 2012 | ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS MANAGEMENT AND CONTROL REQUIREMENTS FOR MSFC SPACE FLIGHT HARDWARE |
| NASA STD 8739.10 : 2017 | ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS ASSURANCE STANDARD |
| NASA MSFC STD 246 : 2011 | STANDARD DESIGN AND OPERATIONAL CRITERIA FOR CONTROLLED ENVIRONMENTAL AREAS |
| NASA STD 8739.2 : 1999 | WORKMANSHIP STANDARD FOR SURFACE MOUNT TECHNOLOGY |
| NASA JSC 27301 : 2009 | MATERIALS AND PROCESSES SELECTION, CONTROL, AND IMPLEMENTATION PLAN FOR JSC FLIGHT HARDWARE |
| NASA MSFC SPEC 494 : 2009 | INSTALLATION OF HARNESS ASSEMBLIES (ELECTRICAL WIRING), SPACE VEHICLE, GENERAL SPECIFICATION FOR |
| SAE AS 6171/9 : 2016 | TECHNIQUES FOR SUSPECT/COUNTERFEIT EEE PARTS DETECTION BY FOURIER TRANSFORM INFRARED SPECTROSCOPY (FTIR) TEST METHODS |
| A-A-59701-5 Revision A:2006 | WRIST STRAP, DISPOSABLE, ELECTROSTATIC DISCHARGE |
| ESDA/JEDEC JS-002 : 2014 | ELECTROSTATIC DISCHARGE SENSITIVITY TESTING - CHARGED DEVICE MODEL (CDM) - COMPONENT LEVEL |
| MIL-HDBK-522 Revision A:2016 | GUIDELINES FOR INSPECTION OF AIRCRAFT ELECTRICAL WIRING INTERCONNECT SYSTEMS |
| SAE ARP 6328 : 2016 | GUIDELINE FOR DEVELOPMENT OF COUNTERFEIT ELECTRONIC PARTS; AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION SYSTEMS |
| SAE AS 6496 : 2014 | FRAUDULENT/COUNTERFEIT ELECTRONIC PARTS: AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION - AUTHORIZED/FRANCHISED DISTRIBUTION |
| ANSI/AIHA/ASSP Z9.9-2010 | PORTABLE VENTILATION SYSTEMS |
| I.S. EN 16602-20:2014 | SPACE PRODUCT ASSURANCE - QUALITY ASSURANCE |
| ESD TR17.0-01 : 2015 | BEST PRACTICES USED IN INDUSTRY |
| ESD S541 : 2008 | PACKAGING MATERIALS FOR ESD SENSITIVE ITEMS |
| IEC TS 62668-1:2016 | Process management for avionics - Counterfeit prevention - Part 1: Avoiding the use of counterfeit, fraudulent and recycled electronic components |
| A-A-59701-3 Revision A:2006 | WRIST STRAP, SINGLE CONDUCTOR, ADJUSTABLE, THERMOPLASTIC, ELECTROSTATIC DISCHARGE WITH OPTIONAL GROUNDING CORD |
| SAE AS 6171 : 2016 | TEST METHODS STANDARD; GENERAL REQUIREMENTS, SUSPECT/COUNTERFEIT, ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL PARTS |
| ASTM E 1161 : 2009 | Standard Practice for Radiologic Examination of Semiconductors and Electronic Components |
| IPC 2221B:2012 | GENERIC STANDARD ON PRINTED BOARD DESIGN |
| IPC 2221 FRENCH : B2012 | GENERIC STANDARD ON PRINTED BOARD DESIGN |
| ESD STM3.1 : 2015 | IONIZATION |
| ESD STM12.1 : 2013 | SEATING - RESISTIVE MEASUREMENT |
| ESD STM2.1 : 2013 | GARMENTS |
| ESD STM97.1 : 2015 | FLOOR MATERIALS AND FOOTWEAR - RESISTANCE MEASUREMENT IN COMBINATION WITH A PERSON |
| ESD ADV1.0 : 2017 | GLOSSARY |
| ESD STM9.1 : 2014 | FOOTWEAR - RESISTIVE CHARACTERIZATION |
| ESD STM4.2 : 2012 | ESD PROTECTIVE WORKSURFACES - CHARGE DISSIPATION CHARACTERISTICS |
| ESD S7.1 : 2013 | RESISTIVE CHARACTERIZATION OF MATERIALS - FLOOR MATERIALS |
| ESD TR53-01 : 2015 | COMPLIANCE VERIFICATION OF ESD PROTECTIVE EQUIPMENT AND MATERIALS |
| ESD S6.1 : 2014 | GROUNDING |
| ESD SP9.2 : 2003 | FOOTWEAR - FOOT GROUNDERS RESISTIVE CHARACTERIZATION |
| ESD S1.1 : 2013 | WRIST STRAPS |
| ESD S4.1 : 2006 | WORKSURFACES - RESISTANCE MEASUREMENTS |
| ESD S541 : 2008 | PACKAGING MATERIALS FOR ESD SENSITIVE ITEMS |
| ESD STM97.2 : 2016 | FLOOR MATERIALS AND FOOTWEAR - VOLTAGE MEASUREMENT IN COMBINATION WITH A PERSON |
| ESD SP3.3 : 2016 | PERIODIC VERIFICATION OF AIR IONIZERS |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.