EN 423:2001
|
Resilient floor coverings - Determination of resistance to staining |
EN 717-2:1994/AC:2002
|
WOOD-BASED PANELS - DETERMINATION OF FORMALDEHYDE RELEASE - PART 2: FORMALDEHYDE RELEASE BY THE GAS ANALYSIS METHOD |
EN 12667:2001
|
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance |
ISO 4302:2016
|
Cranes Wind load assessment |
ISO 354:2003
|
Acoustics — Measurement of sound absorption in a reverberation room |
EN 14215:2013
|
Textile floor coverings - Classification of machine-made pile rugs and runners |
EN 1815:1997
|
Resilient and textile floor coverings - Assessment of static electrical propensity |
EN 13297:2007/AC:2008
|
TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED PILE FLOOR COVERINGS |
EN 985:2001
|
Textile floor coverings - Castor chair test |
EN 13329:2016+A1:2017
|
Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods |
EN 433:1994
|
Resilient floor coverings - Determination of residual indentation after static loading |
ISO 10965:2011
|
Textile floor coverings Determination of electrical resistance |
EN 425:2002
|
Resilient and laminate floor coverings - Castor chair test |
ISO 6356:2012
|
Textile and laminate floor coverings Assessment of static electrical propensity Walking test |
EN 435:1994
|
Resilient floor coverings - Determination of flexibility |
EN 717-1:2004
|
Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
ISO 11925-2:2010
|
Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
EN 13553:2017
|
Resilient floor coverings - Polyvinyl chloride floor coverings for use in special wet areas - Specification |
EN 424:2001
|
Resilient floor coverings - Determination of the effect of simulated movement of a furniture leg |
EN 12524 : 2000
|
BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES |
EN 669:1997
|
Resilient floor coverings - Determination of dimensional stability of linoleum tiles caused by changes in atmospheric humidity |
ISO 11654:1997
|
Acoustics Sound absorbers for use in buildings Rating of sound absorption |
EN 1470:2008
|
Textile floor coverings - Classification of needled floor coverings except for needled pile floor coverings |
EN ISO 9239-1:2010
|
Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010) |
EN 986:2005
|
Textile floor coverings - Tiles - Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane |
EN ISO 354:2003
|
Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
EN 13893:2002
|
Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces |
ISO 140-8:1997
|
Acoustics Measurement of sound insulation in buildings and of building elements Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor |
EN 660-2:1999/A1:2003
|
RESILIENT FLOOR COVERINGS - DETERMINATION OF WEAR RESISTANCE - PART 2: FRICK-TABER TEST |
EN 438-1:2016
|
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information |
EN ISO 140-8 : 1997
|
ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 8: LABORATORY MEASUREMENTS OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A HEAVYWEIGHT STANDARD FLOOR |
EN 660-1:1999/A1:2003
|
RESILIENT FLOOR COVERINGS - DETERMINATION OF WEAR RESISTANCE - PART 1: STUTTGART TEST |
EN 429:1993
|
Resilient floor coverings - Determination of the thickness of layers |
EN ISO 105-B02:2014
|
Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:2014) |
ISO 9239-1:2010
|
Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source |
EN 428:1993
|
Resilient floor coverings - Determination of overall thickness |
EN 1081:1998
|
Resilient floor coverings - Determination of the electrical resistance |
EN 1814:2005
|
Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test |
EN ISO 11654:1997
|
Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997) |
EN 685:2007
|
Resilient, textile and laminate floor coverings - Classification |
EN ISO 11925-2:2010/AC:2011
|
REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST |
ISO 105-B02:2014
|
Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
ISO 1765:1986
|
Machine-made textile floor coverings — Determination of thickness |
EN 1963:2007
|
Textile floor coverings - Tests using the Lisson Tretrad Machine |