EN 13160-7:2016
|
Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
|
ISO 2719:2016
|
Determination of flash point — Pensky-Martens closed cup method
|
ISO 7619-1:2010
|
Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness)
|
ASTM D 1177 : 2017 : REDLINE
|
Standard Test Method for Freezing Point of Aqueous Engine Coolants
|
EN 1412:2016
|
Copper and copper alloys - European numbering system
|
EN 27888 : 1993
|
WATER QUALITY - DETERMINATION OF ELECTRICAL CONDUCTIVITY
|
EN 981:1996+A1:2008
|
Safety of machinery - System of auditory and visual danger and information signals
|
EN ISO 3104:1996
|
Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994)
|
EN 60079-0:2012/A11:2013
|
EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
|
EN ISO 80079-36:2016
|
Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016)
|
305/2011 : 2011 AMD 2 2014
|
REGULATION (EU) NO 305/2011 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 9 MARCH 2011 LAYING DOWN HARMONISED CONDITIONS FOR THE MARKETING OF CONSTRUCTION PRODUCTS AND REPEALING COUNCIL DIRECTIVE 89/106/EEC (TEXT WITH EEA RELEVANCE)
|
EN ISO 12185:1996
|
Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996)
|
EN 13341:2005+A1:2011
|
Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods
|
ISO 80079-36:2016
|
Explosive atmospheres Part 36: Non-electrical equipment for explosive atmospheres Basic method and requirements
|
ISO 12185:1996
|
Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method
|
EN 61672-1:2013
|
Electroacoustics - Sound level meters - Part 1: Specifications
|
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015)
|
ISO 175:2010
|
Plastics Methods of test for the determination of the effects of immersion in liquid chemicals
|
ISO 7888:1985
|
Water quality — Determination of electrical conductivity
|
IEC 60079-0:2011
|
Explosive atmospheres - Part 0: Equipment - General requirements
|
EN 12285-2 : 2005
|
WORKSHOP FABRICATED STEEL TANKS - PART 2: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE ABOVEGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
|
ISO 9001:2015
|
Quality management systems — Requirements
|
EN 10027-1:2016
|
Designation systems for steels - Part 1: Steel names
|
EN 12285-1:2003
|
WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
|
EN ISO 2719:2016
|
Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016)
|
EN 13160-1:2016
|
Leak detection systems - Part 1: General Principles
|
EN 1652:1997/AC:2003
|
COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES
|
EN ISO 175:2010
|
Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
|
ISO 431:1981
|
Copper refinery shapes
|