I.S. EN 15232:2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
11-06-2017
English
01-01-2012
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviations and acronyms
5 Impact of BACS and TBM on the energy performance
of buildings
6 Factor based calculation procedure of the BACS
impact on the energy performance of buildings
(BACS factor method)
Annex A (normative) - Detailed calculation procedure
of the BACS impact on the energy performance
of buildings (Detailed method)
Annex B (informative) - Determination of the BACS
efficiency factors
Annex C (informative) - Examples of how to use the
BACS function list of EN ISO 16484-3 to
describe functions from this European Standard
Annex D (informative) - The impact of innovative
integrated BACS functions (examples)
Annex E (informative) - Applying BACS for EMS specified
in EN 16001
Annex F (informative) - Maintain BACS energy efficiency
Annex G (informative) - Control accuracy
Bibliography
Describes: - a structured list of Building Automation and Control System (BACS) and Technical Building Management (TBM) functions which have an impact on the energy performance of buildings; - a method to define minimum requirements regarding BACS and TBM functions to be implemented in buildings of different complexities; - a factor based method to get a first estimation of the impact of these functions on typical buildings; - detailed methods to assess the impact of these functions on a given building. These methods enable to introduce the impact of these functions in the calculations of energy performance ratings and indicators calculated by the relevant standards.
| DocumentType |
Standard
|
| Pages |
115
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN EN 15232:2012-04 | Identical |
| BS EN 15232:2012 | Identical |
| SN EN 15232 : 2012 | Identical |
| NBN EN 15232 : 2012 | Identical |
| NS EN 15232 : 2012 | Identical |
| NEN EN 15232 : 2012 | Identical |
| NF EN 15232 : 2012 | Identical |
| UNI EN 15232 : 2012 | Identical |
| EN 15232:2012 | Identical |
| DIN EN 15232 E : 2012 | Identical |
| EN 15193:2007/AC:2010 | ENERGY PERFORMANCE OF BUILDINGS - ENERGY REQUIREMENTS FOR LIGHTING |
| CEN/TS 15379:2006 | Building management - Terminology and scope of services |
| EN 15603:2008 | Energy performance of buildings - Overall energy use and definition of energy ratings |
| EN 15316-3-3:2007 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-3: Domestic hot water systems, generation |
| EN 15378:2007 | Heating systems in buildings - Inspection of boilers and heating systems |
| ISO 16484-5:2017 | Building automation and control systems (BACS) — Part 5: Data communication protocol |
| DIN V 18599-4:2016-10 | ENERGY EFFICIENCY OF BUILDINGS - CALCULATION OF THE NET, FINAL AND PRIMARY ENERGY DEMAND FOR HEATING, COOLING, VENTILATION, DOMESTIC HOT WATER AND LIGHTING - PART 4: NET AND FINAL ENERGY DEMAND FOR LIGHTING |
| EN 12098-5:2017 | Energy Performance of Buildings - Controls for heating systems - Part 5: Start-stop schedulers for heating systems - Modules M3-5,6,7,8 |
| EN 15316-4-2:2017/AC:2017 | ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-2: SPACE HEATING GENERATION SYSTEMS, HEAT PUMP SYSTEMS, MODULE M3-8-2, M8-8-2 |
| EN 215 : 2004 AMD 1 2006 | THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS |
| ISO 9488:1999 | Solar energy Vocabulary |
| EN 16001:2009 | Energy management systems - Requirements with guidance for use |
| IEC 61131-3:2013 | Programmable controllers - Part 3: Programming languages |
| EN 15240:2007 | Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of air-conditioning systems |
| EN 15241:2007/AC:2011 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY LOSSES DUE TO VENTILATION AND INFILTRATION IN BUILDINGS |
| ISO 16484-2:2004 | Building automation and control systems (BACS) — Part 2: Hardware |
| EN 15316-4-4:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-4: Heat generation systems, building-integrated cogeneration systems, Module M8-3-4, M8-8-4, M8-11-4 |
| EN 15316-4-6:2007 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-6: Heat generation systems, photovoltaic systems |
| CEN/CLC/TR 16103:2010 | Energy management and energy efficiency - Glossary of terms |
| EN 15316-1:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General and Energy performance expression, Module M3-1, M3-4, M3-9, M8-1, M8-4 |
| ISO 16484-1:2010 | Building automation and control systems (BACS) — Part 1: Project specification and implementation |
| EN 832:1998/AC:2002 | THERMAL PERFORMANCE OF BUILDINGS - CALCULATION OF ENERGY USE FOR HEATING - RESIDENTIAL BUILDINGS |
| EN 61131-3:2013 | Programmable controllers - Part 3: Programming languages |
| EN ISO 13790:2008 | Energy performance of buildings - Calculation of energy use for space heating and cooling (ISO 13790:2008) |
| EN 15316-4-7:2008 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-7: Space heating generation systems, biomass combustion systems |
| EN 15316-4-3:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-3: Heat generation systems, thermal solar and photovoltaic systems, Module M3-8-3, M8-8-3, M11-8-3 |
| EN ISO 16484-5:2017 | Building automation and control systems (BACS) - Part 5: Data communication protocol (ISO 16484-5:2017) |
| EN ISO 16484-1:2010 | Building automation and control systems (BACS) - Part 1: Project specification and implementation (ISO 16484-1:2010) |
| ISO 16484-3:2005 | Building automation and control systems (BACS) Part 3: Functions |
| EN 15316-2-1:2007 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 2-1: Space heating emission systems |
| EN ISO 9488:1999 | Solar energy - Vocabulary (ISO 9488:1999) |
| EN 12098-4 : 2005 | CONTROLS FOR HEATING SYSTEMS - PART 4: OPTIMUM START-STOP CONTROL EQUIPMENT FOR ELECTRICAL SYSTEMS |
| EN 13363-1:2003+A1:2007/AC:2008 | SOLAR PROTECTION DEVICES COMBINED WITH GLAZING - CALCULATION OF SOLAR AND LIGHT TRANSMITTANCE - PART 1: SIMPLIFIED METHOD |
| CEN/TR 15615:2008 | Explanation of the general relationship between various European standards and the Energy Performance of Buildings Directive (EPBD) - Umbrella Document |
| EN ISO 16484-3:2005 | Building automation and control systems (BACS) - Part 3: Functions (ISO 16484-3:2005) |
| EN 15316-3-2:2007 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-2: Domestic hot water systems, distribution |
| EN 15239:2007 | Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of ventilation systems |
| EN 12098-3:2017 | Energy Performance of Buildings - Controls for heating systems - Part 3: Control equipment for electrical heating systems - Modules M3-5,6,7,8 |
| EN 15243:2007 | Ventilation for buildings - Calculation of room temperatures and of load and energy for buildings with room conditioning systems |
| EN 15255:2007 | Energy performance of buildings - Sensible room cooling load calculation - General criteria and validation procedures |
| EN 13779:2007 | Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems |
| ISO 13790:2008 | Energy performance of buildings Calculation of energy use for space heating and cooling |
| IEC 60675:1994+AMD1:1998 CSV | Household electric direct-acting room heaters - Methods for measuring performance |
| EN 15242:2007 | Ventilation for buildings - Calculation methods for the determination of air flow rates in buildings including infiltration |
| EN 15316-4-1:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-1: Space heating and DHW generation systems, combustion systems (boilers, biomass), Module M3-8-1, M8-8-1 |
| EN 12098-2 : 2001 | CONTROLS FOR HEATING SYSTEMS - PART 2: OPTIMUM START-STOP CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS |
| EN 60675:1995/A1:1998 | HOUSEHOLD ELECTRIC DIRECT-ACTING ROOM HEATERS - METHODS FOR MEASURING PERFORMANCE |
| EN 15217:2007 | Energy performance of buildings - Methods for expressing energy performance and for energy certification of buildings |
| EN 15500:2008 | Control for heating, ventilating and air-conditioning applications - Electronic individual zone control equipment |
| EN ISO 16484-2:2004 | Building automation and control systems (BACS) - Part 2: Hardware (ISO 16484-2:2004) |
| EN 12098-1:2017 | Energy Performance of Buildings - Controls for heating systems - Part 1: Control equipment for hot water heating systems - Modules M3-5, 6, 7, 8 |
| EN 15316-4-5:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-5: District heating and cooling, Module M3-8-5, M4-8-5, M8-8-5, M11-8-5 |
| EN 15316-2-3:2007 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 2-3: Space heating distribution systems |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.