• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

I.S. EN 1634-2:2008

Current
Current

The latest, up-to-date edition.

FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES AND ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE CHARACTERISATION TEST FOR ELEMENTS OF BUILDING HARDWARE
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2008

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Test conditions
   4.1 Ambient conditions within laboratory
   4.2 Heating conditions
   4.3 Pressure conditions
5 Test construction
   5.1 General
   5.2 Test construction for evaluating single axis hinges
   5.3 Test construction for evaluating securing devices
   5.4 Test construction for evaluating non-edge mounted
        items of building hardware
   5.5 Test construction for evaluating ignition risk for
        items attached to the unexposed face of uninsulating
        steel or glazed doors
   5.6 Test construction for evaluating surface mounted
        overhead controlled door closing devices for use
        on unlatched doorsets
6 Test specimen
   6.1 Associated construction
   6.2 Conditioning
   6.3 Fixings
   6.4 Test specimen for evaluating single axis hinges
   6.5 Test specimen for evaluating securing devices
   6.6 Test specimen for the evaluation of non-edge mounted
        items of building hardware (including air transfer grilles)
   6.7 Test specimen for evaluation of ignition risk for
        surface mounted controlled overhead door closing devices
   6.8 Test specimen for evaluating surface mounted
        overhead controlled door closing devices for their
        ability to retain an unlatched timber door closed
7 Loading and restraint
   7.1 General
   7.2 Loading and restraint conditions for evaluating
        single axis hinges
   7.3 Loading and restraint conditions for evaluating
        securing devices
8 Test equipment
   8.1 Furnace
   8.2 Measurement of ambient conditions
   8.3 Measurement of furnace conditions
   8.4 Loading equipment
   8.5 Monitoring instrumentation
9 Pre-test examination/characterization of the specimen
   9.1 General
   9.2 Characterization of the test specimen for evaluating
        a single axis hinge
   9.3 Characterization of the test specimen for evaluating
        securing devices
   9.4 Characterisation of the test specimen for evaluating
        non-edge mounted items
   9.5 Characterisation of the test specimen for evaluating
        the ignition risk of surface mounted overhead controlled
        door closing devices
   9.6 Characterisation of the test specimen for evaluating
        surface mounted overhead controlled door closing devices
10 Test procedure
   10.1 Common procedures
   10.2 Commencement of heating and control of heating
        conditions
   10.3 Test protocols
   10.4 Monitoring of criteria
   10.5 Termination of test
11 Performance criteria
   11.1 General
   11.2 Resistance to loading
   11.3 Maintenance of closing force
   11.4 Integrity (E)
   11.5 Insulation (I)
   11.6 Criteria relevant to each item under evaluation
12 Expression of results
   12.1 General
   12.2 Single axis hinges and securing devices
   12.3 Non-edge mounted items of building hardware
   12.4 Evaluating the ignition risk from attaching surface
        mounted overhead controlled door closing devices to
        the unexposed face of uninsulating steel or glazed
        doors
   12.5 Surface mounted overhead controlled door closing
        devices for use on unlatched door assemblies
13 Test report
14 Field of direct application
   14.1 General
   14.2 Single action hinges
   14.3 Securing devices
   14.4 Surface mounted overhead controlled door closing
        devices
   14.5 Non edge-mounted items of building hardware
Annex A (normative) - Decision Trees
Annex B (informative) - Guidance with respect to the test
        conditions
   B.1 Pressure conditions used when testing single axis
        hinges
   B.2 Application of load and measurement of displacement
Annex C (informative) - Role and criteria for building
        hardware in fire
   C.1 Single axis hinge
   C.2 Securing devices
   C.3 Surface mounted overhead controlled door closing devices
   C.4 Non-edge mounted items of building hardware
Annex D (normative) - Guidance on the suitability of reduced size
        furnaces
Annex E (informative) - Guidance with respect to the test
        construction
   E.1 External independent pivot
   E.2 Selection of the associated construction
Annex F (informative) - Route to classification
Bibliography

Defines a method for characterizing the influence on fire performance of items of building hardware for incorporation into hinged or pivoted vertically installed fire door assemblies (having either one or two leaves) or vertically installed openable window assemblies, of known fire resistance of up to and including 240 minutes integrity (and where relevant insulation) in accordance with EN 1634-1.

DocumentType
Standard
Pages
62
PublisherName
National Standards Authority of Ireland
Status
Current

Standards Relationship
EN 1634-2 : 2008 Identical

EN 1906:2012 Building hardware - Lever handles and knob furniture - Requirements and test methods
EN 1155:1997/A1:2002/AC:2006 BUILDING HARDWARE - ELECTRICALLY POWERED HOLD-OPEN DEVICES FOR SWING DOORS - REQUIREMENTS AND TEST METHODS
EN 1935:2002/AC:2003 BUILDING HARDWARE - SINGLE-AXIS HINGES - REQUIREMENTS AND TEST METHODS
EN 1158:1997/A1:2002/AC:2006 BUILDING HARDWARE - DOOR COORDINATOR DEVICES - REQUIREMENTS AND TEST METHODS
EN 1125:2008 Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods
EN 13724:2013/AC:2016 POSTAL SERVICES - APERTURES OF PRIVATE LETTER BOXES AND LETTER PLATES - REQUIREMENTS AND TEST METHODS
EN 13501-2:2016 Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services
EN 12519:2004 Windows and pedestrian doors - Terminology
EN 12209:2016 Building hardware - Mechanically operated locks and locking plates - Requirements and test methods
PREN 15269-1 : DRAFT 2017 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 1: GENERAL REQUIREMENTS
EN 1154:1996/A1:2002/AC:2006 BUILDING HARDWARE - CONTROLLED DOOR CLOSING DEVICES - REQUIREMENTS AND TEST METHODS
EN 1363-1:2012 Fire resistance tests - Part 1: General Requirements
EN 14600:2005 Doorsets and openable windows with fire resisting and/or smoke control characteristics - Requirements and classification
EN 179:2008 Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods

View more information
£90.60
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.