• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

I.S. EN 1777:2010

Current
Current

The latest, up-to-date edition.

HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2010

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective measures
6 Verification
7 Information for use
Annex A (informative) - Special loads and forces - Use of
        HP's in wind speeds greater than Beaufort scale 6
Annex B (informative) - Dynamic factors in stability and
        structural calculations
Annex C (informative) - Major alterations and repairs
Annex D (normative) - Design of wire rope drive systems for
        the extending structures and platform levelling systems
Annex E (informative) - Calculation example of Annex D for wire
        rope, drum and pulley diameters
Annex ZA (informative) - Relationship between this European
         Standard and the Essential Requirements of EU Directive
         2006/42/EC
Bibliography

Applicable to vehicle mounted Hydraulic Platforms (HP's), intended for use by fire and rescue services. HP's may participate in fire fighting, rescue or protection of persons, protection of the environment and in a variety of other technical operations.

DocumentType
Standard
Pages
83
PublisherName
National Standards Authority of Ireland
Status
Current

Standards Relationship
SN EN 1777:2010 Identical
BS EN 1777:2010 Identical
NS EN 1777 : 2010 Identical
NBN EN 1777 : 2010 Identical
NF EN 1777 : 2010 Identical
EN 1777:2010 Identical
UNE-EN 1777:2011 Identical
NEN EN 1777 : 2010 Identical
UNI EN 1777 : 2010 Identical
DIN EN 1777:2010-06 Identical

CEN Guide 414:2017 Safety of machinery - Rules for the drafting and presentation of safety standards
EN 1846-2:2009+A1:2013 Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance
ISO 2408:2017 Steel wire ropes — Requirements
EN 894-3:2000+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
EN 280:2013+A1:2015 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
EN 982:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
ISO 14122-3:2016 Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
ISO 4302:2016 Cranes Wind load assessment
EN 981:1996+A1:2008 Safety of machinery - System of auditory and visual danger and information signals
EN 894-2:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
ISO 3864-2:2016 Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels
ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
CR 954-100:1999 Safety of machinery - Safety-related parts of control systems - Part 100: Guide on the use and application of EN 954-1:1996
EN ISO 14121-1:2007 Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007)
EN 349:1993+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
IEC 60947-5-1 : 4.0 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
EN 360:2002 Personal protective equipment against falls from a height - Retractable type fall arresters
ISO 14122-4:2016 Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders
ISO 14121-1:2007 Safety of machinery Risk assessment Part 1: Principles
EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN ISO 14122-3:2016 Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016)
ISO 4309:2010 Cranes Wire ropes Care and maintenance, inspection and discard
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
ISO 4305:2014 Mobile cranes Determination of stability
EN 842:1996+A1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing
EN ISO 14122-4:2016 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016)
ISO 13849-2:2012 Safety of machinery — Safety-related parts of control systems — Part 2: Validation
EN 1846-3:2013 Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance
ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
EN ISO 13849-2:2012 Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012)
EN 983:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
BS 2573-2:1980 Rules for the design of cranes Specification for classification, stress calculations and design of mechanisms
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
ISO 3864-3:2012 Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs
CEN/TS 15989:2015 Firefighting and rescue service vehicles and equipment - Graphical symbols for control elements and displays and for markings
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
EN 1846-1:2011 Firefighting and rescue service vehicles - Part 1: Nomenclature and designation
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
EN 894-1:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators

View more information
£98.84
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.