• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

I.S. EN 4476:2011

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT
Available format(s)

Hardcopy , PDF

Withdrawn date

31-03-2020

Language(s)

English

Published date

01-01-2011

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Batch release and qualification testing
6 Designation
Annex A (normative) - Method for the determination of
        ability to selectively remove the finish
Annex B (normative) - Method for the determination of
        ability to restore the paint system after removal
Annex C (normative) - Composition of reference paint remover
Bibliography

Describes the requirements for a two component polyurethane, topcoat, with a medium degree of resistance to erosion by the effects of rain, available in a range of colours and levels of gloss, to be applied over a primer for aerospace applications on areas where rain erosion at subsonic speeds may be a problem, e.g. leading edges and air intakes.

DocumentType
Standard
Pages
19
PublisherName
National Standards Authority of Ireland
Status
Withdrawn
SupersededBy

Standards Relationship
EN 4476:2011 Identical

EN 23270:1991 Paints and varnishes and their raw materials - Temperatures and humidities for conditioning and testing (ISO 3270:1984)
EN 2334 : 1997 AEROSPACE SERIES - CHROMIC-SULPHURIC ACID PICKLE OF ALUMINIUM AND ALUMINIUM ALLOYS
EN 4160:2011 Aerospace series - Paints and varnishes - Determination of the effect of thermal exposure
EN 2435-002:2006 Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 002: High corrosion resistance
PREN 2379 : 200P1 AEROSPACE SERIES - FLUIDS FOR ASSESSMENT OF NON-METALLIC MATERIALS
EN 2434-004:2010 Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 004: High flexibility
PREN 3847 : 200P2 AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF SEDIMENTATION RATING
EN ISO 2431:2011 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011)
ISO 3675:1998 Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method
ISO 2884-1:1999 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear
ISO 1520:2006 Paints and varnishes Cupping test
EN 2435-001 : 2006 AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING PRIMER - PART 001: MINIMUM REQUIREMENTS
EN ISO 2409:2013 Paints and varnishes - Cross-cut test (ISO 2409:2013)
ISO 11507:2007 Paints and varnishes Exposure of coatings to artificial weathering Exposure to fluorescent UV lamps and water
EN 3696 : 2001 AEROSPACE SERIES - WASHERS IN HEAT RESISTING STEEL
EN ISO 3675:1998 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998)
EN ISO 3251:2008 Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008)
EN ISO 9514:2005 Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2005)
ISO 3679:2015 Determination of flash no-flash and flash point — Rapid equilibrium closed cup method
EN ISO 2884-1:2006 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear (ISO 2884-1:1999)
EN ISO 1513:2010 Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010)
ISO 11890-1:2007 Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method
EN ISO 3680:2004 Determination of flash/no flash - Rapid equilibrium closed cup method (ISO 3680:2004)
EN ISO 9117-1:2009 Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009)
ISO 9117-3:2010 Paints and varnishes — Drying tests — Part 3: Surface-drying test using ballotini
PREN 3837 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - NATURE AND METHOD FOR SURFACE PREPARATION OF TEST PIECES IN ALUMINIUM ALLOYS
ISO 3847:1977 Liquid flow measurement in open channels by weirs and flumes — End-depth method for estimation of flow in rectangular channels with a free overfall
ISO 1518:1992 Paints and varnishes Scratch test
EN ISO 1520:2006 Paints and varnishes - Cupping test (ISO 1520:2006)
EN ISO 11890-1:2007 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007)
TR 7000-9 : 1 AEROSPACE SERIES - NON-METALLIC MATERIALS - RULES FOR THE DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 9: PAINTS AND VARNISHES
ISO 6272-1:2011 Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter
ISO 1513:2010 Paints and varnishes Examination and preparation of test samples
ISO 3251:2008 Paints, varnishes and plastics Determination of non-volatile-matter content
ISO 3680:2004 Determination of flash/no flash Rapid equilibrium closed cup method
ISO 3270:1984 Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing
EN ISO 3679:2015 Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015)
EN ISO 1518:2000 Paints and varnishes - Scratch test (ISO 1518:1992)
ISO 9117-1:2009 Paints and varnishes — Drying tests — Part 1: Determination of through-dry state and through-dry time
ISO 2409:2013 Paints and varnishes Cross-cut test
ISO 9514:2005 Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and guidelines for testing
EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011)
EN 3840:2007 Aerospace series - Paints and varnishes - Technical specification
ISO 2813:2014 Paints and varnishes Determination of gloss value at 20, 60 and 85
EN ISO 2813:2014 Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014)
EN ISO 9117-3:2010 Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini (ISO 9117-3:2010)
ISO 2431:2011 Paints and varnishes Determination of flow time by use of flow cups
EN ISO 11507:2007 Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water (ISO 11507:2007)

View more information
£30.20
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.