• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

I.S. EN 45510-2-5:2002

Current
Current

The latest, up-to-date edition.

GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2002

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

Foreword
1 Scope
2 Normative references
3 Definitions
   3.1 Organisational terms
   3.2 Technical terms
   3.3 General terms
4 Brief overall project description
   4.1 Role and organisation of purchaser
   4.2 Site location
   4.3 Equipment task
   4.4 Equipment to be purchased
   4.5 Control and instrumentation
   4.6 Electrical supplies and other services
   4.7 Other interfaces
   4.8 Project programme
   4.9 Equipment identification systems
5 Extent of supply
6 Terminal points
7 Operational requirements
   7.1 Operating environment
   7.2 Manning levels
   7.3 Normal operation
   7.4 Operating hours
   7.5 Start-up and shut-down
   7.6 Abnormal conditions
   7.7 Further operational requirements
8 Life expectancy
   8.1 Design life
   8.2 Components requiring periodic maintenance
9 Performance requirements
   9.1 Duty
   9.2 Performance
   9.3 Equipment margins
   9.4 Availability
   9.5 Levels of component redundancy
   9.6 Further performance requirements
10 Design and fabrication
   10.1 Specific equipment features
   10.2 Design justification
   10.3 Material selection
   10.4 Safety
   10.5 Interchangeability
   10.6 Fabrication methods
11 Maintenance requirements
   11.1 Planned maintenance
   11.2 Personnel safety
   11.3 Requirements for access
   11.4 Lifting requirements
   11.5 Special tools
   11.6 Test equipment
   11.7 Spare parts strategy
   11.8 Special precautions
12 Technical documentation requirements
   12.1 Tender documentation
   12.2 Contract documentation
13 Applicable legislation, regulations, standards and further
   requirements
   13.1 Legislation and regulations
   13.2 Standards
   13.3 Further requirements
14 Evaluation criteria
   14.1 General
   14.2 Technical criteria
15 Quality measures
   15.1 General
   15.2 Approvals procedure
   15.3 Inspection requirements
   15.4 Non-conformity
16 Site factors
   16.1 Access
   16.2 Facilities
   16.3 Site specific requirements
17 Verification of specified performance
   17.1 General
   17.2 Works tests
   17.3 Tests during installation and commissioning
   17.4 Technical conditions for trial run
   17.5 Functional and performance tests
Annex A (informative) Bibliography

Provides guidance on writing the technical specification for the procurement of motors for use in electricity generating stations (power stations).

DocumentType
Standard
Pages
34
PublisherName
National Standards Authority of Ireland
Status
Current

IEC 60773:1983 Test methods and apparatus for measurement of the operational characteristics of brushes
IEC 60079-1:2014 RLV Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60356:1971 Dimensions for commutators and slip-rings
IEC 60681-1:1980 Dimensions of small power motors for definite purpose application - Part 1: Oil burner motors
HD 214 : 200S2 RECOMMENDED METHOD FOR DETERMINING THE COMPARATIVE TRACKING INDEX OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS
EN 60034-1:2010/corrigendum Oct. 2010 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
IEC 60050-411:1996 International Electrotechnical Vocabulary (IEV) - Part 411: Rotating machinery
HD 637 S1:1999/corrigendum:2005 POWER INSTALLATIONS EXCEEDING 1 KV A.C.
IEC 60560:1977 Definitions and terminology of brush-holders for electrical machines
EN ISO 9002:1994/AC:1997 QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION
EN 60034-7:1993/A1:2001 ROTATING ELECTRICAL MACHINES - PART 7: CLASSIFICATION OF TYPES OF CONSTRUCTION, MOUNTING ARRANGEMENTS AND TERMINAL BOX POSITION (IM CODE)
EN 50019:2000/corrigendum Apr. 2003 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INCREASED SAFETY "E"
EN 50018 : 2000 AMD 1 2002 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D"
HD 472 S1:1989/AC:2013 NOMINAL VOLTAGES FOR LOW-VOLTAGE PUBLIC ELECTRICITY SUPPLY SYSTEMS
EN 60034-12:2017 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
EN 60270:2001/A1:2016 HIGH-VOLTAGE TEST TECHNIQUES - PARTIAL DISCHARGE MEASUREMENTS (IEC 60270:2000/A1:2015)
EN 60034-14:2004/A1:2007 ROTATING ELECTRICAL MACHINES - PART 14: MECHANICAL VIBRATION OF CERTAIN MACHINES WITH SHAFT HEIGHTS 56 MM AND HIGHER - MEASUREMENT, EVALUATION AND LIMITS OF VIBRATION SEVERITY
IEC 60072-1:1991 Dimensions and output series for rotating electrical machines - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080
EN 45510-8-1:1998 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 8-1: CONTROL AND INSTRUMENTATION
EN 60034-9:2005/A1:2007 ROTATING ELECTRICAL MACHINES - PART 9: NOISE LIMITS
EN 60034-15:2009 Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines
HD 53.8 : 200S5 ROTATING ELECTRICAL MACHINES - TERMINAL MARKINGS AND DIRECTION OF ROTATION OF ROTATING MACHINES
EN 45510-2-7:2002 Guide for procurement of power station equipment - Part 2-7: Electrical equipment - Switchgear and controlgear
IEC 60413:1972 Test procedures for determining physical properties of brush materials for electrical machines
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
HD 566 : 200S1 THERMAL EVALUATION AND CLASSIFICATION OF ELECTRICAL INSULATION
EN 60034-4:2008 Rotating electrical machines - Part 4: Methods for determining synchronous machine quantities from tests
IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
IEC 60072-2:1990 Dimensions and output series for rotating electrical machines - Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360
EN 45510-2-9 : 2008 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS
IEC 60034-12:2016 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
EN ISO 8402 : 1995 QUALITY MANAGEMENT AND QUALITY ASSURANCE - VOCABULARY
EN 50209:1998 Test of insulation of bars and coils of high-voltage machines
EN 60034-2:1996/A2:1996 ROTATING ELECTRICAL MACHINES - PART 2: METHODS FOR DETERMINING LOSSES AND EFFICIENCY OF ROTATING ELECTRICAL MACHINERY FROM TESTS (EXCLUDING MACHINES FOR TRACTION VEHICLES)
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
EN 50016:2002 Electrical apparatus for potentially explosive atmospheres - Pressurized apparatus "p"
EN 60276:1996 Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings
EN 60034-6:1993 Rotating electrical machines - Part 6: Methods of cooling (IC Code)
EN 50347:2001 General purpose three-phase induction motors having standard dimensions and outputs - Frame numbers 56 to 315 and flange numbers 65 to 740
EN 50014:1997/A2:1999 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS
IEC 60079-15:2010 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
EN 60034-5:2001/A1:2007 ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION

View more information
£58.57
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.