PREN 6059-305 : 200P1
|
AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 305: FLUID ABSORPTION
|
ISO 8815:1994
|
Aircraft — Electrical cables and cable harnesses — Vocabulary
|
EN 6059-503:2017
|
Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 503: Temperature rise due to rated current injected on the sleeve
|
EN 6049-003:2009
|
Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 003: Braided, tubular, expandable - Product standard
|
EN 3844-1:2011
|
Aerospace series - Flammability of non metallic materials - Part 1: Small burner test, vertical - Determination of the vertical flame propagation
|
EN 2825:2011
|
Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of smoke density
|
EN 6059-601 : 2014
|
AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 601: OPEN AND CLOSE
|
PREN 6049-005 : 200P2
|
AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - PART 005: SLEEVE FLEXIBLE, POST INSTALLATION - PRODUCT STANDARD
|
PREN 6059-402 : 200P1
|
AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 402: BENDING PROPERTIES
|
PREN 6059-202 : 200P2
|
AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 202: DIMENSIONS AND MASS
|
PREN 6059-203 : 200P1
|
AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - COVERAGE
|
PREN 6059-306 : 200P1
|
AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - MOULD GROWTH
|
EN 6059-502:2014
|
Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 502: Resistance to electrical arcs
|
EN 6059-504:2014
|
Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 504: Temperature rise within a loom due to self-heating when protected by a sleeve
|
IEC 60096-0-1:2012+AMD1:2017 CSV
|
Radio frequency cables - Part 1- 0: Guide to the design of detail specifications - Coaxial cables
|
PREN 6059-406 : 200P2
|
AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 406: VIBRATION
|
PREN 6059-308 : 200P1
|
AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 308: RAPID CHANGE OF TEMPERATURE
|
EN 2591-214:2012
|
Aerospace series - Elements of electrical and optical connection - Test methods - Part 214: Lightning strike, current and voltage pulse
|
PREN 6059-404 : 200P1
|
AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - TENSILE STRENGTH
|
EN 3475-301:2002
|
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 301: Ohmic resistance per unit length
|
PREN 6059-403 : 200P1
|
AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - SCRAPE ABRASION
|
EN 6059-501:2010
|
Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 501: Voltage proof test
|
PREN 6059-201 : 200P1
|
AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - VISUAL INSPECTION
|
EN 2826:2011
|
Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of gas components in the smoke
|
PREN 6059-405 : 200P1
|
AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - DYNAMIC CUT-THROUGH
|
PREN 6049-009 : 200P3
|
AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - PART 009: SELF-WRAPPING FIRE PROTECTION SLEEVE, FLEXIBLE POST INSTALLATION OPERATING TEMPERATURE FROM -55 DEGREES C TO 260 DEGREES C - PRODUCT STANDARD
|
PREN 6059-401 : 200P1
|
AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - EXPANSION RANGE
|
EN 3197 : 2010
|
AEROSPACE SERIES - DESIGN AND INSTALLATION OF AIRCRAFT ELECTRICAL AND OPTICAL INTERCONNECTION SYSTEMS
|
PREN 6059-301 : 200P1
|
AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - SUN LIGHT EXPOSURE
|
PREN 6059-302 : 200P1
|
AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - HIGH TEMPERATURE EXPOSURE
|
EN 2591-307:2012
|
Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist
|
PREN 6049-004 : 200P1
|
AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - BRAIDED, TUBULAR, HIGH EXPANDABLE - PRODUCT STANDARD
|
PREN 6059-303 : 200P3
|
AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 303: RESISTANCE TO FLUIDS
|
EN 6049-007:2012
|
Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 007: Self-wrapping mechanical and electrical protective sleeve, flexible post installation operating temperature from - 55 °C to 260 °C - Product standard
|
EN 6049-006:2012
|
Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 006: Self-wrapping protective sleeve, flexible post installation - Product standard
|