RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 1: PAPER/PLASTIC FILM CAPACITORS

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2011

Publisher

National Standards Authority of Ireland

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Service conditions
5 Quality requirements and tests
6 Overloads
7 Safety requirements
8 Marking
9 Guide to installation and operation
Annex A (informative) - Waveforms
Annex B (normative) - Operational limits of
        capacitors with sinusoidal voltages as
        a function of frequency and at maximum
        temperature (theta[max])
Annex C (normative) - Resonance frequency measuring
        methods - Examples
Bibliography
Annex ZA (normative) - Normative references to
         international publications with their
         corresponding European publications

Pertains to capacitors for power electronics intended to be used on rolling stock. The rated voltage of capacitors covered by this part is limited to 10000 V. The operating frequency of the systems in which these capacitors are used is usually up to 15 kHz, while the pulse frequencies may be up to 5 to 10 times the operating frequency. This differentiates between AC and DC capacitors.

DevelopmentNote	Supersedes I.S. EN 61881. (02/2011) For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
DocumentType	Standard
Pages	51
PublisherName	National Standards Authority of Ireland
Status	Current
Supersedes	I.S. EN 61881:2000

Standards	Relationship
EN 61881-1:2011	Identical
IEC 61881-1:2010	Identical

IEC 61287-1:2014	Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods
IEC 60931-2:1995	Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V - Part 2: Ageing test and destruction test
IEC 61373:2010	Railway applications - Rolling stock equipment - Shock and vibration tests
IEC 60384-14:2013+AMD1:2016 CSV	Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
IEC 62491:2008	Industrial systems, installations and equipment and industrial products - Labelling of cables and cores
IEC 60068-2-20:2008	Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
EN 60068-2-20:2008	Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
IEC 60068-2-21:2006	Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
EN 61373:2010/AC:2017-09	RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS (IEC 61373:2010)
EN 60721-3-5:1997	Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicle installations
IEC 60721-3-5:1997	Classification of environmental conditions - Part 3: Classificationof groups of environmental parameters and their severities -Section 5: Ground vehicle installations
IEC 60695-2-11:2014	Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV	Low-voltage fuses - Part 1: General requirements
IEC 60077-2:2017	Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules
IEC 60831-2:2014	Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 2: Ageing test, self-healing test and destruction test
IEC 60146-1-1:2009	Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements
IEC 60871-1:2014	Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General
EN 60068-2-21:2006	Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
IEC 61071:2017	Capacitors for power electronics
IEC TS 60110-2:2000	Power capacitors for induction heating installations - Part 2: Ageing test, destruction test and requirements for disconnecting internal fuses
IEC 60831-1:2014 RLV	Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation
EN 60068-2-78:2013	Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
IEC 60050-436:1990	International Electrotechnical Vocabulary (IEV) - Part 436: Power capacitors
IEC 62497-1:2010+AMD1:2013 CSV	Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electricaland electronic equipment
EN 62491:2008	Industrial systems, installations and equipment and industrial products - Labelling of cables and cores
EN 60695-11-5:2017	Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
IEC 60077-1:2017	Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules
IEC 60695-11-5 : 2.0	FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
IEC 60068-2-14:2009	Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC TS 60871-2:2014	Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 2: Endurance testing
IEC 60664-1:2007	Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
EN 60068-2-14:2009	Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60110-1:1998	Power capacitors for induction heating installations - Part 1: General
IEC 62498-1:2010	Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock
EN 60695-2-11:2014	Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014)
EN 60269-1:2007/A2:2014	LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS (IEC 60269-1:2006/A2:2014)

View more information

£64.06

Excluding VAT

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

Log into your Account

I.S. EN 61881-1:2011

Current

Table of Contents

Abstract

General Product Information

International Equivalents

Standards Referencing This Book

Category

Subcategory

Access your standards online with a subscription