• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

I.S. EN ISO 10432:2005

Current
Current

The latest, up-to-date edition.

PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2005

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviated terms
5 Functional specification
  5.1 General
  5.2 SSSV functional characteristics
  5.3 Well parameters
  5.4 Operational parameters
  5.5 Environmental compatibility
  5.6 Compatibility with related well equipment
6 Technical specification
  6.1 Technical requirements
  6.2 Technical characteristics of SSSV
  6.3 Design criteria
  6.4 Design verification
  6.5 Design validation
  6.6 Design changes
  6.7 Functional test
7 Supplier/manufacturer requirements
  7.1 General
  7.2 Raw material
  7.3 Heat-treating-equipment qualification
  7.4 Traceability
  7.5 Components undergoing special processes
  7.6 Quality control
  7.7 SSSV functional testing
  7.8 Product identification
  7.9 Documentation and data control
  7.10 Failure reporting and analysis
8 Repair/redress
  8.1 Repair
  8.2 Redress
9 Storage and preparation for transport
Annex A (normative) Test agency requirements
Annex B (normative) Validation testing requirements
Annex C (normative) Functional testing requirements
Annex D (informative) Optional requirement for closure
                      mechanism minimal leakage
Annex E (informative) Operating envelope
Annex F (normative) Data requirements, figures/schematics,
                    and tables
Bibliography

Gives the minimum acceptable requirements for subsurface safety valves (SSSVs). It covers subsurface safety valves including all components that establish tolerances and/or clearances which may affect performance or interchangeability of the SSSVs.

DocumentType
Standard
Pages
88
PublisherName
National Standards Authority of Ireland
Status
Current
Supersedes

ISO 6507-1:2005 Metallic materials Vickers hardness test Part 1: Test method
ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
ASTM E 446 : 2015 : REDLINE Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
ASNT SNT TC 1A : 2016 TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL
ASTM E 186 : 2015 : REDLINE Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings
ISO/TS 29001:2010 Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations
ISO 9712:2012 Non-destructive testing Qualification and certification of NDT personnel
ISO 13628-3:2000 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 3: Through flowline (TFL) systems
ASTM D 1414 : 2015 : REDLINE Standard Test Methods for Rubber O-Rings
ISO 6508-1:2016 Metallic materials — Rockwell hardness test — Part 1: Test method
ISO 13679:2002 Petroleum and natural gas industries Procedures for testing casing and tubing connections
ISO 6892:1998 Metallic materials Tensile testing at ambient temperature
API 14A : 2015 SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT
SAE AS 568 : 2014 AEROSPACE SIZE STANDARD FOR O-RINGS
ISO 16070:2005 Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples
ISO 10417:2004 Petroleum and natural gas industries Subsurface safety valve systems Design, installation, operation and redress
API MPM CH10.4 : 2013 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.4: DETERMINATION OF WATER AND/OR SEDIMENT IN CRUDE OIL BY THE CENTRIFUGE METHOD (FIELD PROCEDURE)
NACE MR 01 75 : 2003 METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS
ISO 15156-2:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
ANSI/NCSL Z540 1 : 94(R2002) CALIBRATION - CALIBRATION LABORATORIES AND MEASURING AND TEST EQUIPMENT - GENERAL REQUIREMENTS
ISO 15156-3:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
ISO 15156-1:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials
ISO 13665:1997 Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube body for the detection of surface imperfections
API 5C3 : 1994 BULLETIN ON FORMULAS AND CALCULATIONS FOR CASING, TUBING, DRILL PIPE AND LINE PIPE PROPERTIES
ASTM E 280 : 2015 : REDLINE Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
BS 2M 54:1991 Specification for temperature control in the heat treatment of metals
ISO 3601-1:2012 Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes
ASTM E 709 : 2015 : REDLINE Standard Guide for Magnetic Particle Testing
SAE AMS H 6875 : 2010 HEAT TREATMENT OF STEEL RAW MATERIALS
ISO 3601-3:2005 Fluid power systems O-rings Part 3: Quality acceptance criteria
ISO 48:2010 Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)
API 5C5 : 2017 PROCEDURES FOR TESTING CASING AND TUBING CONNECTIONS
ASTM D 638 : 2014 : REDLINE Standard Test Method for Tensile Properties of Plastics
MIL-STD-413 Revision C:1980 VISUAL INSPECTION GUIDE FOR ELASTOMERIC O-RINGS
ISO 10414-1:2008 Petroleum and natural gas industries — Field testing of drilling fluids — Part 1: Water-based fluids
ISO 527-1:2012 Plastics Determination of tensile properties Part 1: General principles
ISO/IEC Guide 22:1996 General criteria for supplier's declaration of conformity

View more information
£113.48
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.