• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

I.S. EN ISO 16070:2006

Current
Current

The latest, up-to-date edition.

PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2006

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviated terms
5 Functional specification
  5.1 General
  5.2 Functional characteristics of lock mandrels and
      landing nipples
  5.3 Well parameters
  5.4 Operational parameters
  5.5 Environmental compatibility
  5.6 Compatibility with the related well equipment
  5.7 Quality documentation
  5.8 Design validation
6 Technical specification
  6.1 General
  6.2 Technical characteristics of lock mandrels and
      landing nipples
  6.3 Design criteria
  6.4 Design verification
  6.5 Design validation
  6.6 Design changes
  6.7 Functional test parameters
7 Supplier/manufacturer requirements
  7.1 Documentation and data control
  7.2 User/purchaser documentation
  7.3 Product identification
  7.4 Quality control
  7.5 Functional testing
8 Repair
Annex A (informative) Example of landing nipple validation
        test dimensional check sheet
Bibliography

Gives the requirements for lock mandrels and landing nipples within the production/injection conduit for the installation of flow control or other equipment used in the petroleum and natural gas industries. Includes the interface connections to the flow control or other equipment, but does not cover the connections to the well conduit.

DocumentType
Standard
Pages
36
PublisherName
National Standards Authority of Ireland
Status
Current
Supersedes

ISO 6507-1:2005 Metallic materials Vickers hardness test Part 1: Test method
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
ASTM E 446 : 2015 : REDLINE Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
ASNT SNT TC 1A : 2016 TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL
ASTM E 186 : 2015 : REDLINE Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings
ISO 9712:2012 Non-destructive testing Qualification and certification of NDT personnel
ISO 13628-3:2000 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 3: Through flowline (TFL) systems
ASTM D 1414 : 2015 : REDLINE Standard Test Methods for Rubber O-Rings
ISO 6508-1:2016 Metallic materials — Rockwell hardness test — Part 1: Test method
ISO 6892:1998 Metallic materials Tensile testing at ambient temperature
API 14A : 2015 SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT
SAE AS 568 : 2014 AEROSPACE SIZE STANDARD FOR O-RINGS
ISO 15156-2:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
ANSI/NCSL Z540 1 : 94(R2002) CALIBRATION - CALIBRATION LABORATORIES AND MEASURING AND TEST EQUIPMENT - GENERAL REQUIREMENTS
ISO 15156-3:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
ISO 15156-1:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials
ISO 13665:1997 Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube body for the detection of surface imperfections
ASTM E 280 : 2015 : REDLINE Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
ISO 10432:2004 Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment
BS 2M 54:1991 Specification for temperature control in the heat treatment of metals
ISO 3601-1:2012 Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes
SAE AMS H 6875 : 2010 HEAT TREATMENT OF STEEL RAW MATERIALS
ISO 3601-3:2005 Fluid power systems O-rings Part 3: Quality acceptance criteria
ASTM D 638 : 2014 : REDLINE Standard Test Method for Tensile Properties of Plastics
MIL-STD-413 Revision C:1980 VISUAL INSPECTION GUIDE FOR ELASTOMERIC O-RINGS
ISO 11960:2014 Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells
ISO/IEC Guide 22:1996 General criteria for supplier's declaration of conformity

View more information
£58.57
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.