• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

IEC 60068-2-1:2007

Current
Current

The latest, up-to-date edition.

Environmental testing - Part 2-1: Tests - Test A: Cold
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English - French, English, French, Spanish, Castilian

Published date

13-03-2007

FOREWORD
INTRODUCTION
1 Scope and object
2 Normative references
3 Terms and definitions
4 Application of tests for non heat-dissipating
  specimens versus tests for heat-dissipating
  specimens
  4.1 General
  4.2 Ascertaining high or low air velocity in the
       test chamber
  4.3 Non heat-dissipating specimens
  4.4 Testing of heat-dissipating specimens
  4.5 Temperature monitoring
  4.6 Packaging
  4.7 Diagrammatic representations
5 Test description
  5.1 General
  5.2 Test Ab: Cold for non heat-dissipating specimens
       with gradual change of temperature
       5.2.1 Object
       5.2.2 General description
  5.3 Test Ad: Cold for heat-dissipating specimens with
       gradual change of temperature that are powered
       after initial temperature stabilization
       5.3.1 Object
       5.3.2 General description
  5.4 Test Ae: Cold for heat-dissipating specimens
       with gradual change of temperature that are required
       to be powered throughout the test
       5.4.1 Object
       5.4.2 General description
       5.4.3 Energizing the specimen
6 Test procedure
  6.1 Confirmation of performance
  6.2 Working space
  6.3 Thermal radiation
  6.4 Specimen with artificial cooling
  6.5 Mounting
  6.6 Severities
       6.6.1 Temperature
       6.6.2 Duration
  6.7 Preconditioning
  6.8 Initial measurements
  6.9 Conditioning
  6.10 Intermediate measurements
  6.11 Final temperature ramp
  6.12 Recovery
  6.13 Final measurements
7 Information to be given in the relevant
  specification
8 Information to be given in the test report

IEC 60068-2-1:2007 Deals with cold tests applicable to both non heat-dissipating and heat-dissipating specimens. For non heat-dissipating specimens, Tests Ab and Ad do not deviate essentially from earlier issues. Test Ae has been added primarily for testing equipment that requires being operational throughout the test, including the conditioning periods. The object of the cold test is limited to the determination of the ability of components, equipment or other articles to be used, transported or stored at low temperature. Cold tests cover by this standard do not enable the ability of specimens to withstand or operate during the temperature variations to be assessed. In this case, it would be necessary to use IEC 60068-2-14. The cold tests are subdivided as follows:
- Cold tests for non heat-dissipating specimens: * with gradual change of temperature, Ab;
- Cold test for heat-dissipating specimens: * with gradual change of temperature, Ad,
* with gradual change of temperature, specimen powered throughout, Ae.
The procedures given in this standard are normally intended for specimens that achieve temperature stability during the performance of the test procedure. Temperature chamber(s) are constructed and verified in accordance with specifications IEC 60068-3-5 and IEC 60068-3-7. Further guidance for dry heat and cold tests can be found in IEC 60068-3-1 and general guidance in IEC 60068-1. This sixth edition deals with cold tests applicable both to non heat-dissipating and heat-dissipating specimens. For non heat-dissipating specimens, Tests Ab and Ad do not deviate essentially from earlier issues. Test Ae has been added primary for testing equipment that requires being operational throughout the test including the conditioning periods.

Committee
TC 104
DevelopmentNote
Supersedes IEC 60068-2-1A. (07/2004) Stability Date: 2017. (10/2012)
DocumentType
Standard
Pages
29
PublisherName
International Electrotechnical Committee
Status
Current
Supersedes

I.S. EN IEC 62828-1:2018 REFERENCE CONDITIONS AND PROCEDURES FOR TESTING INDUSTRIAL AND PROCESS MEASUREMENT TRANSMITTERS - PART 1: GENERAL PROCEDURES FOR ALL TYPES OF TRANSMITTERS
15/30323442 DC : 0 BS EN 62679-4-2 ED 1.0 - ELECTRONIC PAPER DISPLAYS - PART 4-2: ENVIRONMENTAL TEST METHOD
BS EN 61337-1:2004 Filters using waveguide type dielectric resonators Generic specification
04/30095958 DC : DRAFT DEC 2004 ISO 19292 - SHIPS AND MARINE TECHNOLOGY - POINT-TYPE RESETTABLE FLAME DETECTORS FOR SHIPS
UNE-EN 60947-5-3:2014 Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
UNE-EN 60068-2-39:2016 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
17/30355772 DC : 0 BS EN 62047-33 ED.1.0 - SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 33: MEMS PIEZORESISTIVE PRESSURE-SENSITIVE DEVICE
13/30287730 DC : 0 BS EN 62828 ED 1.0 - REFERENCE CONDITIONS AND PROCEDURES FOR INDUSTRIAL MEASUREMENT TRANSMITTERS - PART 1: GENERAL PROCEDURES FOR ALL TYPES OF TRANSMITTERS
11/30243697 DC : 0 BS IEC 62718 - RAILWAY APPLICATIONS - ROLLING STOCK - D.C. SUPPLIED ELECTRONIC BALLASTS FOR LIGHTING FLUORESCENT LAMPS
UNE-EN 54-22:2016 Fire detection and fire alarm system - Part 22 : Resettable line-type heat detectors
BS EN 61747-5:1998 Liquid crystal and solid-state display devices Environmental, endurance and mechanical test methods
BS EN 60068-3-1:2011 Environmental testing Supporting documentation and guidance. Cold and dry heat tests
BS EN 60873:1993 Methods of evaluating the performance of electrical and pneumatic analogue chart recorders for use in industrial-process control systems
BS EN 61514-2:2013 Industrial process control systems Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly
BS EN 60255-1:2010 Measuring relays and protection equipment Common requirements
IEC 61643-352:2018 Components for low-voltage surge protection - Part 352: Selection and application principles for telecommunications and signalling network surge isolation transformers (SITs)
11/30205541 DC : 0 BS EN 54-7 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONISATION
03/106844 DC : DRAFT MAY 2003 ISO 7240-11 - FIRE DETECTION AND ALARM SYSTEMS - PART 11: MANUAL CALL POINTS
OIML R 139-1 : 2014 COMPRESSED GASEOUS FUEL MEASURING SYSTEMS FOR VEHICLES - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
BS 7573-1.1(1992) : 1992 AMD 8338 METHODS OF MEASUREMENT FOR EQUIPMENT USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS - MEASUREMENTS COMMON TO TERRESTRIAL RADIO-RELAY SYSTEMS AND SATELLITE EARTH STATIONS - GENERAL
NF EN 60393-5 : 2016 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 5: SECTIONAL SPECIFICATION - SINGLE-TURN ROTARY LOW-POWER WIREWOUND AND NONWIREWOUND POTENTIOMETERS
BS CECC 43000(1982) : AMD 7315 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: GENERIC SPECIFICATION: DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS
I.S. EN 50463-2:2017 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING
BS EN 61851-22:2002 Electric vehicle conductive charging system A.C. electric vehicle charging station
BS EN 54-28:2016 Fire detection and fire alarm system Non-resettable line-type heat detectors
BS EN 60068-3-7:2002 Environmental testing. Guidance Measurements in temperature chambers for tests A and B (with load)
14/30266573 DC : 0 BS EN 12368 - TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS
14/30296823 DC : 0 BS EN 61300-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE
14/30295302 DC : 0 BS EN 61587-1 ED. 4.0 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITIONS
BS EN 14846:2008 Building hardware. Locks and latches. Electromechanically operated locks and striking plates. Requirements and test methods
BS EN 60938-1:2000 Fixed inductors for electromagnetic interference suppression Generic specification
12/30258507 DC : 0 BS EN 62575-1 - RADIO FREQUENCY (RF) BUK ACOUSTIC WAVE (BAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
BS ISO 16525-7:2014 Adhesives. Test methods for isotropic electrically conductive adhesives Environmental test methods
IEC 61045-1:1991 Fixed film resistor networks for use in electronic equipment - Part 1: Generic specification
18/30373170 DC : 0 BS EN 62668-2 - PROCESS MANAGEMENT FOR AVIONICS - COUNTERFEIT PREVENTION - PART 2: MANAGING ELECTRONIC COMPONENTS FROM NON-FRANCHISED SOURCES
IEC 60723-3:1985 Inductor and transformer cores for telecommunications. Part 3: Sectional specification: Magnetic oxide cores for broad-band transformers
15/30290851 DC : 0 BS EN 54-25 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS
BS EN 54-31 : 2014 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 31: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF SMOKE, CARBON MONOXIDE AND OPTIONALLY HEAT SENSORS
OIML R 50-1 : 2014 CONTINUOUS TOTALIZING AUTOMATIC WEIGHING INSTRUMENTS (BELT WEIGHERS) - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
BS EN 60393-2:2016 Potentiometers for use in electronic equipment Sectional specification. Lead-screw actuated and rotary preset potentiometers
13/30280627 DC : 0 BS ISO 7240-15 - FIRE DETECTION AND ALARM SYSTEMS - PART 15: POINT-TYPE FIRE DETECTORS USING SMOKE AND HEAT SENSORS
BS ISO 19292:2014 Ships and marine technology. Lifesaving and fire protection. Point-type resettable flame detectors for ships
BS EN 15684:2012 Building hardware. Mechatronic cylinders. Requirements and test methods
BS IEC 61196-1-206:2017 Coaxial communication cables Environmental test methods. Climatic sequence
BS 2011-2.1Z/AMD:1977 Environmental testing. Tests Test Z/AMD. Combined sequential cold, low air pressure and damp heat test
CEI EN 62341-5 : 2011 ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 5: ENVIRONMENTAL TESTING METHODS
BS EN 61643-312:2013 Components for low-voltage surge protective devices Selection and application principles for gas discharge tubes
BS ISO 21927-10:2011 Smoke and heat control systems Specification for power output devices
BS EN 60687:1993 Specification for alternating current static watt-hour meters for active energy (classes 0,2 S and 0,5 S)
BS 2011-2.1N:1985 Environmental testing. Tests Test N. Change of temperature
10/30210160 DC : 0 BS ISO 12239 - SMOKE ALARMS
BS EN 62575-1:2016 Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality Generic specification
14/30291768 DC : 0 BS EN 1434-4 - HEAT METERS - PART 4: PATTERN APPROVAL TESTS
15/30325784 DC : 0 BS EN 62974-1 - MONITORING AND MEASURING SYSTEMS USED FOR DATA COLLECTION, GATHERING AND ANALYSIS - PART 1: DEVICE REQUIREMENTS
09/30183239 DC : 0 BS EN 62572-3 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - RELIABILITY STANDARDS - PART 3: LASER MODULES USED FOR TELECOMMUNICATION
BS EN 62246-1:2015 Reed switches Generic specification
BS EN 61051-1:2008 Varistors for use in electronic equipment Generic specification
BS ISO 11614:1999 Reciprocating internal combustion compression-ignition engines. Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
BS ISO 17363:2013 Supply chain applications of RFID. Freight containers
PREN 50463-2 : DRAFT 2015 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING
ISO 18251-1:2017 Non-destructive testing Infrared thermography Part 1: Characteristics of system and equipment
EN 50556:2011 Road traffic signal systems
DIN EN 138000 : 1997 GENERIC SPECIFICATION; FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED)
BS EN 61204:1995 Low-voltage power supply devices, d.c. output. Performance characteristics and safety requirements
NF EN 62314 : 2006 SOLID-STATE RELAYS
15/30325282 DC : 0 BS EN 62884-1 - MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELETIRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT
DIN EN 54-25 E : 2009 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS
BS 7415(1991) : 1991 AMD 7674 SPECIFICATION FOR TIME SWITCHES FOR TARIFF AND LOAD CONTROL
BS EN 61757-1:2012 Fibre optic sensors Generic specification
PD CEN ISO/TS 14907-1:2015 Electronic fee collection. Test procedures for user and fixed equipment Description of test procedures
13/30264600 DC : 0 BS EN 60747-14-8 ED 1.0 - SEMICONDUCTOR DEVICES - PART 14-8: SEMICONDUCTOR SENSORS - CAPACITIVE DEGRADATION SENSOR OF LIQUID
BS EN 171000:2001 Harmonized system of quality assessment for electronic components. Generic specification. Filters using waveguide type dielectric resonators
BS 2011-2.1Z/AM:1977 Environmental testing. Tests Test Z/AM. Combined cold/low air pressure tests
BS EN 61338-2:2004 Waveguide type dielectric resonators Guidelines for oscillator and filter applications
BS EN 60770-3:2014 Transmitters for use in industrial-process control systems Methods for performance evaluation of intelligent transmitters
10/30181171 DC : 0 BS EN 62586 - POWER QUALITY MONITORING DEVICES IN POWER SUPPLY SYSTEMS
03/106843 DC : DRAFT MAY 2003 ISO 7240-6 - FIRE DETECTION AND ALARM SYSTEMS - PART 6: POINT-TYPE FIRE DETECTORS FOR DETECTION OF CARBON MONOXIDE
BS EN 60939-1:2010 Passive filter units for electromagnetic interference suppression Generic specification
PREN 54-11 : DRAFT 2013 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 11: MANUAL CALL POINTS
BS IEC 62908-13-10:2016 Touch and interactive displays Reliability test methods of touch displays. Environmental durability test methods
BS EN 61036:1997 Alternating current static watt-hour meters for active energy (classes 1 and 2)
04/30122860 DC : DRAFT SEP 2004 ISO 7240-22 - FIRE DETECTION AND FIRE ALARM EQUIPMENT - PART 22: DUCT SAMPLING EQUIPMENT
CEI EN 60947-5-3 : 2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB)
PREN 12368 : DRAFT 2014 TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS
10/30240248 DC : 0 BS EN 60862-1 - SURFACE ACOUSTIC WAVE (SAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
PREN 54-20 : DRAFT 2014 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS
BS EN 61248-1:1997 Transformers and inductors for use in electronic and telecommunication equipment Generic specification
98/230491 DC : DRAFT MARCH 1998 IEC 60728-5 - CABLED DISTRIBUTION SYSTEMS FOR TELEVISION AND SOUND SIGNALS - PART 5: HEAD END EQUIPMENT
PD IEC TR 60721-4-6:2002 Ship environmentClassification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068
BS EN 60068-2-50:2000 Environmental testing. Test methods Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat dissipating specimens
BS EN 60749-43:2017 Semiconductor devices - Mechanical and climatic test methods Guidelines for IC reliability qualification plans
BS EN 50463-2:2017 Railway applications. Energy measurement on board trains Energy measuring
04/30112662 DC : DRAFT APR 2004 IEC 61810-7 ED.2 - ELECTROMECHANICAL ELEMENTARY RELAYS - PART 7: TEST AND MEASUREMENT PROCEDURES
BS EN 60539-1:2016 Directly heated negative temperature coefficient thermistors Generic specification
15/30329546 DC : 0 BS EN 50463-2 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING
17/30347208 DC : 0 BS ISO 7240-7 - FIRE DETECTION AND ALARM SYSTEMS - PART 7: POINT-TYPE SMOKE DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION
CEI EN 62488-2 : 1ED 2018 POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC
BS 6796:1986 Specification for flickermeters
BS EN 61300-1:2016 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures General and guidance
BS EN 62884-1:2017 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Basic methods for the measurement
BS EN 61338-1:2005 Waveguide type dielectric resonators Generic specification
04/30109635 DC : 0 BS EN 54-23 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARMS
I.S. EN 50486:2008 EQUIPMENT FOR USE IN AUDIO AND VIDEO DOOR-ENTRY SYSTEMS
01/200684 DC : DRAFT FEB 2001
17/30352083 DC : DRAFT JUL 2017 BS EN 62244 - RADIATION PROTECTION INSTRUMENTATION - INSTALLED RADIATION PORTAL MONITORS (RPMS) FOR THE DETECTION OF ILLICIT TRAFFICKING OF RADIOACTIVE AND NUCLEAR MATERIALS
BS EN 12966:2014 Road vertical signs. Variable message traffic signs
05/30135750 DC : DRAFT JUL 2005 ISO 7240-10 - FIRE DETECTION AND ALARM SYSTEMS - PART 10: POINT-TYPE FLAME DETECTORS
PREN 54-10 : DRAFT 2012 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 10: FLAME DETECTORS - POINT DETECTORS
07/30163407 DC : 0 BS ISO 7240-28 - FIRE DETECTION AND ALARM SYSTEMS - PART 28: FIRE PROTECTION CONTROL EQUIPMENT
OIML R 46-1 & 2 : 2012 ACTIVE ELECTRICAL ENERGY METERS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS
DD CEN ISO/TS 14907-1:2010 Electronic fee collection. Test procedures for user and fixed equipment Description of test procedures
14/30298027 DC : 0 BS EN 61069-4 ED 2.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 4: ASSESSMENT OF SYSTEM PERFORMANCE
BS EN 60077-2:2017 Railway applications. Electric equipment for rolling stock Electrotechnical components. General rules
07/30172404 DC : DRAFT DEC 2007 BS EN 62047-9 - SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 9: WAFER TO WAFER BONDING STRENGTH MEASUREMENT FOR MEMS
BS EN 50311:2003 Railway applications. Rolling stock. D.C. supplied electronic ballasts for lighting fluorescent lamps
11/30251478 DC : 0 BS EN 1300 - SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING
10/30218875 DC : 0 BS EN 50130-5:2010 - ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS
NF EN 60384-1 : 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
09/30184483 DC : 0 BS EN 54-3 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS
BS ISO 7240-8:2014 Fire detection and alarm systems Point-type fire detectors using a carbon monoxide sensor in combination with a heat sensor
06/30155911 DC : DRAFT SEP 2006 BS EN 140401-801 - DETAIL SPECIFICATION - FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25; 0,5; 1
BS EN 60384-1:2016 Fixed capacitors for use in electronic equipment Generic specification
BS EN 60947-5-8:2006 Low-voltage switchgear and controlgear Control circuit devices and switching elements - Three-position enabling switches
02/540596 DC : DRAFT JULY 2002 PREN 54-17 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 17: SHORT CIRCUIT ISOLATORS
17/30371228 DC : 0 BS EN 62149-3 ED.3.0 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 3: MODULATOR-INTEGRATED LASER DIODE TRANSMITTERS FOR 2;5-GBIT/S TO 40-GBIT/S FIBRE OPTIC TRANSMISSION SYSTEMS
IEC 60571:2012 Railway applications - Electronic equipment used on rolling stock
BS EN 61300-2-20:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests Climatic sequence
05/30132097 DC : DRAFT JUNE 2005 IEC 60679-1 ED 3 - QUARTZ CRYSTAL CONTROLLED OSCILLATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
01/200972 DC : DRAFT FEB 2001 IEC 61243-1 ED.2 - LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
UNE-EN 16280:2013 Breath alcohol test devices for general public - Requirements and test methods
CEI EN 60068-3-7 : 2002 ENVIRONMENTAL TESTING - PART 3-7: SUPPORTING DOCUMENTATION AND GUIDANCE MEASUREMENTS IN TEMPERATURE CHAMBERS FOR TEST A AND B (WITH LOAD)
02/211632 DC : DRAFT DEC 2002 IEC 69747-5-4 ED.1 - SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-4: OPTOELECTRONIC DEVICES - SEMICONDUCTOR LASERS
BS EN 61582:2006 Radiation protection instrumentation. In vivo counters. Classification, general requirements and test procedures for portable, transportable and installed equipment
UNE 199031-4:2011 Road marking equipment. Data capture stations. Test and proof methods. Part 4: Test methods
BS EN 62211:2004 Inductive components. Reliability management
BS EN 140101:2008 Blank Detail Specification. Fixed low power film resistors
NF EN 301908-2 : 2016 IMT CELLULAR NETWORKS - HARMONISED EN COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE R&TTE DIRECTIVE - PART 2: CDMA DIRECT SPREAD (UTRA FDD) USER EQUIPMENT (UE) (V7.1.1)
BS EN 61169-8:2007 Radio-frequency connectors Sectional specification. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock. Characteristic impedance 50 ohms (type BNC)
OIML R 143 : 2009 INSTRUMENTS FOR THE CONTINUOUS MEASUREMENT OF SO[2] IN STATIONARY SOURCE EMISSIONS
05/30135445 DC : DRAFT JUN 2005 IEC 61169-8 - RADIO-FREQUENCY CONNECTORS - PART 8: SECTIONAL SPECIFICATION - RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 6,5 MM (0,256 IN) WITH BAYONET LOCK - CHARACTERISTICS IMPEDANCE 50 OHMS (TYPE BNC)
98/201910 DC : DRAFT APRIL 1998 PREN 50297 - PHOTOELECTRIC CONTROL UNITS FOR ROAD AND STREET LIGHTING
OIML R 81 : 1998 DYNAMIC MEASURING DEVICES AND SYSTEMS FOR CRYOGENIC LIQUIDS
ISO 16525-7:2014 Adhesives Test methods for isotropic electrically conductive adhesives Part 7: Environmental test methods
CEI EN 50512 : 2014 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS)
OIML R 85-1 & 2 : 2008 AUTOMATIC LEVEL GAUGES FOR MEASURING THE LEVEL OF LIQUID IN STATIONARY STORAGE TANKS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROL AND TESTS
BS EN 13637:2015 Building hardware. Electrically controlled exit systems for use on escape routes. Requirements and test methods
02/106353 DC : DRAFT OCT 2002 EN 12966-1 - VERTICAL ROAD TRAFFIC SIGNS - PART 1: VARIABLE MESSAGE SIGNS
04/30039291 DC : DRAFT NOV 2004
BS EN 165000-1:1996 Film and hybrid integrated circuits Generic specification. Capability approval procedure
OIML R 137-1 & 2 : 2012 AMD 2014 GAS METERS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS
NF EN 62674-1 : 2013 HIGH FREQUENCY INDUCTIVE COMPONENTS - PART 1: FIXED SURFACE MOUNT INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT
09/30197779 DC : 0 BS ISO 7240-25 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO TRANSMISSION PATHS
BS CECC68000(1990) : AMD 9184 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: GENERIC SPECIFICATION: QUARTZ CRYSTAL UNITS
07/30166909 DC : DRAFT AUG 2007 BS EN 15714-2 - INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
NF EN 60947-5-5 : 1998 AMD 2 2017 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION
CEI EN 62211 : 2005 INDUCTIVE COMPONENTS - RELIABILITY MANAGEMENT
DIN EN 12405-3:2016-04 Gas meters - Conversion devices - Part 3: Flow computer
I.S. EN 60384-1:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
OIML R 134-1 : 2006 AUTOMATIC INSTRUMENTS FOR WEIGHING ROAD VEHICLES IN MOTION AND MEASURING AXLE LOADS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS
ISO 7240-8:2014 Fire detection and alarm systems Part 8: Point-type fire detectors using a carbon monoxide sensor in combination with a heat sensor
I.S. EN 62572-3:2016 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - RELIABILITY STANDARDS - PART 3: LASER MODULES USED FOR TELECOMMUNICATION
OVE/ONORM EN 61051-1 : 2009 VARISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
I.S. EN 60947-5-5:1999 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION
I.S. EN 168000:1994 QUARTZ CRYSTAL UNITS (GENERIC SPECIFICATION)
I.S. EN 60738-1:2006 THERMISTORS - DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
CEI EN 50155 : 2008 RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK
I.S. EN 181000:1994 FIBRE OPTIC BRANCHING DEVICES (GENERIC SPECIFICATION)
I.S. EN 60689:2009 MEASUREMENT AND TEST METHODS FOR TUNING FORK QUARTZ CRYSTAL UNITS IN THE RANGE FROM 10 KHZ TO 200 KHZ AND STANDARD VALUES
CEI EN 60689 : 2009 MEASUREMENT AND TEST METHODS FOR TUNING FORK QUARTZ CRYSTAL UNITS IN THE RANGE FROM 10 KHZ TO 200 KHZ AND STANDARD VALUES
I.S. EN 60749-43:2017 SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS - PART 43: GUIDELINES FOR IC RELIABILITY QUALIFICATION PLANS
I.S. EN 60694:1999 COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
I.S. EN 61810-7:2006 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 7: TEST AND MEASUREMENT PROCEDURES
I.S. EN 62745:2017 SAFETY OF MACHINERY - REQUIREMENTS FOR CABLELESS CONTROL SYSTEMS OF MACHINERY
I.S. EN 61643-311:2013 COMPONENTS FOR LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 311: PERFORMANCE REQUIREMENTS AND TEST CIRCUITS FOR GAS DISCHARGE TUBES (GDT) (IEC 61643-311:2013 (EQV))
EN 62271-1:2017 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
I.S. EN 61850-3:2014 COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 3: GENERAL REQUIREMENTS
I.S. EN 62586-1:2017 POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 1: POWER QUALITY INSTRUMENTS (PQI)
I.S. EN 140402-801:2015 DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS - RECTANGULAR - STABILITY CLASSES 0,5; 1; 2
I.S. EN 62333-3:2010 NOISE SUPPRESSION SHEET FOR DIGITAL DEVICES AND EQUIPMENT - PART 3: CHARACTERIZATION OF PARAMETERS OF NOISE SUPPRESSION SHEET
I.S. EN 54-23:2010 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARM DEVICES
I.S. EN 50130-5:2011 ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS
I.S. EN 15714-2:2009 INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
I.S. EN 60770-3:2014 TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 3: METHODS FOR PERFORMANCE EVALUATION OF INTELLIGENT TRANSMITTERS
OIML D 11 : 2013 GENERAL REQUIREMENTS FOR MEASURING INSTRUMENTS - ENVIRONMENTAL CONDITIONS
UNE-EN 1434-4:2016 Heat meters - Part 4: Pattern approval tests
IEC 62391-1:2015 RLV Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification
I.S. EN 61508-7:2010 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES
PREN 54-7 : DRAFT 2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONISATION
IEC 62391-1:2015 Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification
BIS IS/ISO 7240-5 : 2003 FIRE DETECTION AND ALARM SYSTEMS - PART 5: POINT-TYPE HEAT DETECTORS
I.S. EN 62575-1:2016 RADIO FREQUENCY (RF) BULK ACOUSTIC WAVE (BAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
I.S. EN 1434-4:2015 HEAT METERS - PART 4: PATTERN APPROVAL TESTS
OIML R 35-1 : 2007 AMD 2014 MATERIAL MEASURES OF LENGTH FOR GENERAL USE - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
I.S. EN 60945:2002 MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - GENERAL REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS
I.S. EN 61248-1:1998 TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 1: GENERIC SPECIFICATION
I.S. EN 62246-1-1:2013 REED SWITCHES - PART 1-1: GENERIC SPECIFICATION - QUALITY ASSESSMENT (IEC 62246-1-1:2013 (EQV))
14/30274689 DC : 0 BS EN 54-20 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS
NF EN 60939-1 : 2011 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
IEC 61253-1:1993 Piezoelectric ceramic resonators - A specification in the IEC quality assessment system for electronic components (IECQ) - Part 1: Generic specification - Qualification approval
IEC 60092-306:2009 Electrical installations in ships - Part 306: Equipment - Luminaires and lighting accessories
I.S. EN 61988-4:2007 PLASMA DISPLAY PANELS - PART 4: CLIMATIC AND MECHANICAL TESTING METHODS
NF EN 50486 : 2008 EQUIPMENT FOR USE IN AUDIO AND VIDEO DOOR-ENTRY SYSTEMS
UNE-EN 60728-3:2012 Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks
CSA C22.2 No. 61980-1 : 2016 ELECTRIC VEHICLE WIRELESS POWER TRANSFER (WPT) SYSTEMS - PART 1: GENERAL REQUIREMENTS
I.S. EN 60939-1:2010 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
I.S. EN 50512:2009 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS)
IEC 60605-3-3:1992 Equipment reliability testing - Part 3: Preferred test conditions - Section 3: Test Cycle 3: Equipment for stationary use in partially weatherprotected locations - Low degree of simulation
IEC 61851-1:2017 Electric vehicle conductive charging system - Part 1: General requirements
EN 301 908-15 : 5.2.1 IMT CELLULAR NETWORKS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF DIRECTIVE 2014/53/EU; PART 15: EVOLVED UNIVERSAL TERRESTRIAL RADIO ACCESS (E-UTRA FDD) REPEATERS
DIN EN 12368:2015-09 TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS
IEC 60728-3 : 5.0 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS
DIN EN 13763-26:2004-11 Explosives for civil uses - Detonators and relays - Part 26: Definitions, methods and requirements for devices and accessories for reliable and safe function of detonators and relays; German version EN 13763-26:2004
NF EN 62391-1 : 2018 FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
NF EN 60122-1 : 2003 QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
BS EN 12966-1 : 2005 ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: PRODUCT STANDARD
BS EN 45501:2015 Metrological aspects of non-automatic weighing instruments
BS EN 12414:1999 Vehicle parking control equipment. Pay and display ticket machine. Technical and functional requirements
IEC 61747-5:1998 Liquid crystal and solid-state display devices - Part 5: Environmental, endurance and mechanical test methods
IEC 62211:2017 Inductive components - Reliability management
IEC 62246-1:2015 Reed switches - Part 1: Generic specification
IEC 62752:2016 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
BS EN 61557-8:2015 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Insulation monitoring devices for IT systems
IEC 60873:1986 Methods of evaluating the performance of electrical and pneumatic analogue chart recorders for use in industrial-process control systems
BS EN 13763-26:2004 Explosives for civil uses. Detonators and relays Definitions, methods and requirements for devices and accessories for reliable and safe functioning of detonators and relays
BS EN 50155:2017 Railway applications. Rolling stock. Electronic equipment
UNE-EN 15684:2015 Building hardware - Mechatronic cylinders - Requirements and test methods
IEC 60687:1992 Alternating current static watt-hour meters for active energy (classes 0,2 S and 0,5 S)
IEC 62149-3:2014 Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 2,5-Gbit/s to 40-Gbit/s fibre optic transmission systems
16/30282633 DC : 0 BS EN 50155 - RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK
IEC 60835-1-1:1990 Methods of measurement for equipment used in digital microwave radio transmission systems. Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section One: General
IEC 61037:1990+AMD1:1996+AMD2:1998 CSV Electricity metering - Tariff and load control - Particular requirements for electronic ripple control receivers
IEC 60384-1:2016 RLV Fixed capacitors for use in electronic equipment - Part 1: Generic specification
DIN EN 54-17:2006-03 Fire detection and fire alarm systems - Part 17: Short-circuit isolators
EN 60770-1:2011 Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation
EN 61268:1996 Alternating current static var-hour meters for reactive energy (classes 2 and 3)
IEC 60092-504:2016 RLV Electrical installations in ships - Part 504: Automation, control and instrumentation
EN 61337-1:2004 Filters using waveguide type dielectric resonators - Part 1: Generic specification
DIN EN 14154-2:2011-06 WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE
EN 60747-5-2:2001/A1:2002 DISCRETE SEMICONDUCTOR DEVICES AND INTEGRATED CIRCUITS - PART 5-2: OPTOELECTRONIC DEVICES - ESSENTIAL RATINGS AND CHARACTERISTICS
EN 60947-5-8:2006 Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching elements - Three-position enabling switches
EN 12352:2006 TRAFFIC CONTROL EQUIPMENT - WARNING AND SAFETY LIGHT DEVICES
EN 60728-14:2014 Cable networks for television signals, sound signals and interactive services - Part 14: Optical transmission systems using RFoG technology
EN 61010-2-012:2016 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment
EN 61019-1 : 2005 Surface acoustic wave (SAW) resonators - Part 1: Generic specification
EN 60694:1996/A2:2001 COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
EN 62246-1:2015 Reed switches - Part 1: Generic specification
EN 61300-2-20 : 1997 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-20: TESTS - CLIMATIC SEQUENCE
EN 140402-801:2015 Detail specification: Fixed low power wirewound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2
EN 61582:2006 Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures for portable, transportable and installed equipment
EN 134000:1994 Generic Specification: Variable capacitors (Qualification approval and capability approval)
DIN EN 14846:2008-11 BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS
EN 50130-5:2011 ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS
EN 62333-3:2010 Noise suppression sheet for digital devices and equipment - Part 3: Characterization of parameters of noise suppression sheet
EN 60068-2-50:1999 Environmental testing - Part 2: Tests - Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
EN 60939-1:2010 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
EN 60835-1-1:1992 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 1: General
EN 60947-8:2003/A2:2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES (IEC 60947-8:2003/A2:2011)
EN 60689:2009 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values
EN 140101:2008 Blank Detail Specification: Fixed low power film resistors
EN 12368:2015 Traffic control equipment - Signal heads
EN 12405 : 2002 GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES
EN 60505:2011/AC:2017-03 EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS (IEC 60505:2011/COR1:2017)
EN 61747-5:1998 Liquid crystal and solid-state display devices - Part 5: Environmental, endurance and mechanical test methods
EN 129000:1993/A1:1995 GENERIC SPECIFICATION - FIXED RF WOUND INDUCTORS
EN 62341-5:2009 Organic Light Emitting Diode (OLED) displays - Part 5: Environmental testing methods
EN 62040-5-3:2017 Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements
DIN EN ISO 4064-2:2017-10 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014)
EN 61051-1:2008 Varistors for use in electronic equipment - Part 1: Generic specification
EN 60068-2-5:2011 Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing
EN 60687:1992/corrigendum:1993 ALTERNATING CURRENT STATIC WATT HOUR METERS FOR ACTIVE ENERGY (CLASSES 0.2S AND 0.5S)
EN 61131-2:2007 Programmable controllers - Part 2: Equipment requirements and tests
EN 62586-1:2017 Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI)
EN 61851-1:2011 Electric vehicle conductive charging system - Part 1: General requirements
EN 12101-10:2005/AC:2007 SMOKE AND HEAT CONTROL SYSTEMS - PART 10: POWER SUPPLIES
EN 60738-1:2006/A1:2009 THERMISTORS - DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
EN 62604-1:2015 Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 1: Generic specification
EN 60068-3-4:2002 Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
EN 61514-2:2013 INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY (IEC 61514-2:2013)
EN 60115-2:2015 Fixed resistors for use in electronic equipment - Part 2: Sectional specification: Leaded fixed low power film resistors
EN 61850-3:2014 Communication networks and systems for power utility automation - Part 3: General requirements
EN 62718:2016 Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps
EN 60068-2-40:1999 Environmental testing - Part 2: Tests - Test Z/AM: Combined cold/low air pressure tests
EN 62878-1-1:2015 Device embedded substrate - Part 1-1: Generic specification - Test methods
EN 60945:2002 Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results
EN 60512-11-10:2002 Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold
EN 61298-3:2008 Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities
EN 140401:2009 Blank Detail Specification: Fixed low power film surface mount (SMD) resistors
EN 12966-1:2005+A1:2009 Road vertical signs - Variable message traffic signs - Part 1: Product standard
HD 638 S1:2001/A1:2006 ROAD TRAFFIC SIGNAL SYSTEMS
EN 61291-5-2:2017 Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers
EN 140402:2015/A1:2016 BLANK DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS
EN 62674-1 : 2012 HIGH FREQUENCY INDUCTIVE COMPONENTS - PART 1: FIXED SURFACE MOUNT INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT (IEC 62674-1:2012)
EN 50311:2003 Railway applications - Rolling stock - D.C. supplied electronic ballasts for lighting fluorescent lamps
EN 60169-21:1997 Radio-frequency connectors - Part 21: Two types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with different versions of screw coupling - Characteristic impendance 50 ohms (types SC-A and SC-B)
ETSI TS 136 141 V17.9.0:2023-04 LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) conformance testing (3GPP TS 36.141 version 17.9.0 Release 17)
ETSI TS 137 141 V17.9.0:2023-04 Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; 5G; NR, E-UTRA, UTRA and GSM/EDGE; Multi-Standard Radio (MSR) Base Station (BS) conformance testing (3GPP TS 37.141 version 17.9.0 Release 17)
ETSI TS 136 141 V17.8.0:2023-01 LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) conformance testing (3GPP TS 36.141 version 17.8.0 Release 17)
VDS 2358 : 2009
EN 181000:1994 Generic Specification: Fibre optic branching devices
EN 133000:1997 Generic Specification: Passive filter units for electromagnetic interference suppression
OVE/ONORM EN 61557-12 : 2009 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 12: PERFORMANCE MEASURING AND MONITORING DEVICES (PMD)
EN 180000:1995 Generic specification: Fibre optic attenuators
EN 117000:1991 Generic Specification: Solid state all-or-nothing relays of assessed quality - Generic data and methods of test
EN 168000 : 1993 AMD 2 1998 GENERIC SPECIFICATION - QUARTZ CRYSTAL UNITS
DIN EN 54-22 E : 2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 22: RESETTABLE LINE-TYPE HEAT DETECTORS
NF EN 62341-5 : 2010 ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 5: ENVIRONMENTAL TESTING METHODS
BS EN 61751:1998 Laser modules used for telecommunication. Reliability assessment
12/30268003 DC : 0 BS EN 60939-3 - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 3: HARMONIZED STANDARD FOR PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE
12/30255394 DC : DRAFT APR 2012 BS EN 62586-1 - POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - POWER QUALITY INSTRUMENTS (PQI)
PD IEC/TR 60721-4-4:2002 Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Stationary use at non-weatherprotected locations
I.S. EN 61582:2006 RADIATION PROTECTION INSTRUMENTATION - IN VIVO COUNTERS - CLASSIFICATION, GENERAL REQUIREMENTS AND TEST PROCEDURES FOR PORTABLE, TRANSPORTABLE AND INSTALLED EQUIPMENT
I.S. EN 61051-1:2008 VARISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
IEC 60115-2:2014 Fixed resistors for use in electronic equipment - Part 2: Sectional specification: Leaded fixed low power film resistors
12/30266709 DC : 0 BS EN ISO 4064-2 - WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
12/30254691 DC : DRAFT MAR 2012 BS ISO 16525-7 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 7: ENVIRONMENTAL TEST METHODS
07/30166797 DC : 0
PREN 54-5 : DRAFT 2011 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 5: HEAT DETECTORS - POINT DETECTORS
04/30031093 DC : DRAFT FEB 2004 ISO 4064-3 - MEASUREMENT OF WATER FLOW IN CLOSED FULLY CHARGED CONDUITS - METERS FOR COLD POTABLE WATER AND HOT WATER - PART 3: TEST METHODS AND EQUIPMENT
08/30173382 DC : DRAFT AUG 2008 BS ISO 16750-4 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 4: CLIMATIC LOADS
08/30195238 DC : 0
13/30278343 DC : 0 BS EN 62246-1 - REED SWITCHES - PART 1: GENERIC SPECIFICATION
IEC 61587-1:2016 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation
BS EN 60747-5-2:2001 Discrete semiconductor devices and integrated circuits. Optoelectronic devices Essential ratings and characteristics
06/30157868 DC : 0 BS EN 60393-1 - POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS IEC 61275:2013 Radiation protection instrumentation. Measurement of discrete radionuclides in the environment. In situ photon spectrometry system using a germanium detector
BS IEC 60092-306:2009 Electrical installations in ships Equipment. Luminaires and lighting accessories
I.S. EN 54-29:2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 29: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF SMOKE AND HEAT SENSORS
15/30298550 DC : 0 BS EN 16864 - BUILDING HARDWARE - MECHATRONIC PADLOCKS - REQUIREMENTS AND TEST METHODS
16/30309512 DC : 0 BS EN 62327 ED 2.0 - RADIATION PROTECTION INSTRUMENTATION - HAND-HELD INSTRUMENTS FOR THE DETECTION AND IDENTIFICATION OF RADIONUCLIDES AND FOR THE ESTIMATION OF AMBIENT DOSE EQUIVALENT RATE FROM PHOTON RADIATION
17/30362102 DC : DRAFT AUG 2017 BS ISO 21927-4 - SMOKE AND HEAT CONTROL SYSTEMS - PART 4: NATURAL SMOKE AND HEAT EXHAUST VENTILATORS; DESIGN, REQUIREMENTS AND INSTALLATION
IEC TS 62257-3:2015 Recommendations for renewable energy and hybrid systems for rural electrification - Part 3: Project development and management
05/30117311 DC : 0 EN 54-25 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS AND SYSTEM REQUIREMENTS
03/101947 DC : DRAFT FEB 2003 IEC 60939-1 ED.2.0 - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
BS IEC 60747-5.2 : 97 AMD 13433 DISCRETE SEMICONDUCTOR DEVICES AND INTEGRATED CIRCUITS - OPTOELECTRONIC DEVICES - ESSENTIAL RATINGS AND CHARACTERISTICS
PD IEC TR 60721-4-7:2001 Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Portable and non-stationary use
BS EN 60738-1 : 2006 THERMISTORS - DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
03/114763 DC : DRAFT SEP 2003 EN 54-18 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 18: REQUIREMENTS AND TEST METHODS FOR INPUT/OUTPUT DEVICES FOR USE ON THE TRANSMISSION PATHS OF FIRE DETECTION AND FIRE ALARM SYSTEMS
BS EN 62326-20:2016 Printed boards Printed circuit boards for high-brightness LEDs
BS EN 62341-5:2009 Organic light emitting diode (OLED) displays Environmental testing methods
BS EN 60115-8:2012 Fixed resistors for use in electronic equipment Sectional specification. Fixed surface mount resistors
UNI EN 14846 : 2008 BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS
PD IEC/TR 60721-4-2:2002 Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Transportation
13/30279449 DC : 0 BS EN 62149-3 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 3: MODULATOR-INTEGRATED LASER DIODE TRANSMITTERS FOR 2.5-GBIT/S TO 40-GBIT/S FIBRE OPTIC TRANSMISSION SYSTEMS
05/30127975 DC : DRAFT JAN 2005 ISO 7240-12 - FIRE DETECTION AND ALARM SYSTEMS - PART 12: LINE TYPE SMOKE DETECTORS USING A TRANSMITTING LIGHT BEAM
BS EN 62718:2016 Railway applications. Rolling stock. DC supplied electronic ballasts for lighting fluorescent lamps
NF EN 54-23 : 2010 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARM DEVICES
04/30104415 DC : DRAFT AUG 2004 EN 54-20 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS
DIN EN 54-26:2015-11 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 26: CARBON MONOXIDE DETECTORS - POINT DETECTORS
BS EN 60169-21:1997 Radio-frequency connectors Two types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with different versions of screw coupling. Characteristic impedance 50 ohms (types SC-A and SC-B)
I.S. EN 60770-1:2011 TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
DIN EN 54-29:2015-06 Fire detection and fire alarm systems - Part 29: Multi-sensor fire detectors - Point detectors using a combination of smoke and heat sensors
15/30332490 DC : 0 BS EN 62211 - INDUCTIVE COMPONENTS - RELIABILITY MANAGEMENT
15/30281217 DC : 0 BS ISO 18251-1 - NON-DESTRUCTIVE TESTING - INFRARED THERMOGRAPHY - SYSTEM AND EQUIPMENT - PART 1: DESCRIPTION OF CHARACTERISTICS
14/30297921 DC : 0 BS EN 62040-5-3 - UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 5-3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS FOR D.C. UPS
BS EN 62040-5-3:2017 Uninterruptible power systems (UPS) DC output UPS. Performance and test requirements
I.S. EN 54-26:2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 26: CARBON MONOXIDE DETECTORS - POINT DETECTORS
ISO 7240-11:2011 Fire detection and alarm systems Part 11: Manual call points
BS EN 60512-11-10:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11j. Cold
BS EN 62745:2017 Safety of machinery. Requirements for cableless control systems of machinery
BS ISO 21927-9:2012 Smoke and heat control systems Specification for control equipment
NF EN 60770-1 : 2011 TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
BS EN 61810-7:2006 Electromechanical elementary relays Test and measurement procedures
ISO 7240-5:2012 Fire detection and alarm systems Part 5: Point-type heat detectors
NF EN 60068 3-1 : 2012 ENVIRONMENTAL TESTING - PART 3-1: SUPPORTING DOCUMENTATION AND GUIDANCE - COLD AND DRY HEAT TESTS
IEC 61757:2018 Fibre optic sensors - Generic specification
NF EN 61643-311 : 2014 COMPONENTS FOR LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 311: PERFORMANCE REQUIREMENTS AND TEST CIRCUITS FOR GAS DISCHARGE TUBES (GDT)
BS EN 62314:2006 Solid-state relays
03/103741 DC : DRAFT FEB 2003 IEC 61338-1 ED.1 - WAVEGUIDE TYPE DIELECTRIC RESONATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
BS EN 60252:1994 A.C. motor capacitors
BS IEC 60768:2009 Nuclear power plants. Instrumentation important to safety. Equipment for continuous in-line or on-line monitoring of radioactivity in process streams for normal and incident conditions
PD IEC/TR 60721-4-3:2002 Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Stationary use at weatherprotected locations
13/30275356 DC : 0 BS EN 12966 - ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS
07/30161526 DC : 0 BS EN 60115-8 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTORS
BS EN 15714-2:2009 Industrial valves. Actuators Electric actuators for industrial valves. Basic requirements
I.S. EN 61007:1998 TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - MEASURING METHODS AND TEST PROCEDURES
11/30250287 DC : 0 BS EN 60255-27 - MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS
DIN EN 54-24 E : 2008 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS
03/118275 DC : DRAFT NOV 2003 BS EN 14803 - IDENTIFICATION AND/OR DETERMINATION OF THE QUANTITY OF WASTE
EN 61643-351:2017 Components for low-voltage surge protective devices - Part 351: Performance requirements and test methods for telecommunications and signalling network surge isolation transformers (SIT)
NF EN 54-26 : 2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 26: CARBON MONOXIDE DETECTORS - POINT DETECTORS
NF EN 60068 2-14 : 2009 ENVIRONMENTAL TESTING - PART 2-14: TESTS - TEST N: CHANGE OF TEMPERATURE
CSA E60384.1 : 2014 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
03/112283 DC : DRAFT AUG 2003 EN 1300 - SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING
NF EN 54-27 : 2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 27: DUCT SMOKE DETECTORS
BS EN 62586-1:2017 Power quality measurement in power supply systems Power quality instruments (PQI)
NF EN 60947-5-3 : 2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB)
17/30336631 DC : 0 BS EN 62246-1-1 - REED SWITCHES - PART 1-1: DETAIL SPECIFICATION - QUALITY ASSESSMENT
10/30184592 DC : 0 BS EN 61643-311 ED 2.0 - COMPONENTS FOR LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 311: TEST SPECIFICATION FOR GAS DISCHARGE TUBES
BS EN 60747-5-5 : 2011 SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS
NF EN 61020-1 : 2009 ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
01/714407 DC : DRAFT OCT 2001 ISO/DIS 16750-4 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 4: CLIMATIC LOADS
BS EN 60068-3-4:2002 Environmental testing Supporting documentation and guidance - Damp heat tests
I.S. EN 62604-1:2015 SURFACE ACOUSTIC WAVE (SAW) AND BULK ACOUSTIC WAVE (BAW) DUPLEXERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
03/100498 DC : DRAFT JUNE 2003 IEC 60947-5-3 AMD 1. ED 1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDF)
07/30164554 DC : 0 BS EN 62341-5 - ORGANIC LIGHT EMITTING DIODE DISPLAYS - PART 5: ENVIRONMENTAL TEST METHODS
OIML R 125 : 1998 MEASURING SYSTEMS FOR THE MASS OF LIQUIDS IN TANKS
02/211631 DC : 0 IEC 60747-5-5 ED.1.0 - SEMICONDUCTOR DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS, OPTOCOUPLERS
I.S. EN 54-28:2016 FIRE DETECTION AND FIRE ALARM SYSTEM - PART 28: NON-RESETTABLE LINE-TYPE HEAT DETECTORS
BS EN 62674-1:2012 High frequency inductive components Fixed surface mount inductors for use in electronic and telecommunication equipment
PD IEC/TR 60721-4-1:2002 Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Storage
OIML R 144-2 : 2013 INSTRUMENTS FOR CONTINUOUS MEASUREMENT OF CO, NO[X] IN STATIONARY SOURCE EMISSIONS - PART 2: METROLOGICAL AND PERFORMANCE TESTS
TS 125 142 : 13.0.1 UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); BASE STATION (BS) CONFORMANCE TESTING (TDD) (3GPP TS 25.142 VERSION 13.1.0 RELEASE 13)
TS 101 851-5-1 : 2.1.1 SATELLITE EARTH STATIONS AND SYSTEMS (SES); SATELLITE COMPONENT OF UMTS/IMT-2000; PART 5: UE RADIO TRANSMISSION AND RECEPTION; SUB-PART 1: G-FAMILY
IEC 62271-1:2017 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
CEI EN 61851-22 : 2003 ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 22: AC ELECTRIC VEHICLE CHARGING STATION
07/30170374 DC : DRAFT AUG 2007 BS EN 61751-2 - LASER MODULES USED FOR TELECOMMUNICATIONS - RELIABILITY ASSESSMENT - PART 2: TECHNICAL REPORT ON LASER MODULE DEGRADATION
BS EN 60835-1-1:1994 Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements common to terrestrial radio-relay systems and satellite earth stations General
BS EN 61988-4:2007 Plasma display panels Climatic and mechanical testing methods
CEI EN 61300-2-17 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-17: TESTS - COLD
BS ISO 16750-4:2010 Road vehicles. Environmental conditions and testing for electrical and electronic equipment Climatic loads
CEI EN 62689-1 : 1ED 2017 CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS
UNE-EN ISO 4064-2:2015 Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014)
09/30207307 DC : 0 BS EN 60115-2 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: FIXED LOW-POWER NON-WIREWOUND RESISTORS
ASTM E 3137/E3137M : 2017 Standard Specification for Heat Meter Instrumentation
CEI EN 50486 : 2009 EQUIPMENT FOR USE IN AUDIO AND VIDEO DOOR-ENTRY SYSTEMS
BS EN 181000:1995 Harmonized system of quality assessment for electronic components. Generic specification. Fibre optic branching devices
95/541691 DC : 0 ISO/DIS 7240-5 - FIRE DETECTION AND ALARM SYSTEMS - POINT HEAT DETECTORS
I.S. EN 61337-1:2005 FILTERS USING WAVEGUIDE TYPE DIELECTRIC RESONATORS - PART 1: GENERIC SPECIFICATION
CSA E60127.6 : 2003 MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS
CEI EN 61508-7 : 2011 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETYRELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES
CAN/CSA-E60127-6-03 (R2017) Miniature Fuses - Part 6: Fuse-Holders for Miniature Cartridge Fuse-Links (Adopted CEI/IEC 127-6:1994, first edition, 1994-04, including Amendment 1:1996, with Canadian deviations) | Coupe-circuit miniatures - Partie 6: Ensembles-porteurs pour cartouches de coupe-circuit miniatures (norme CEI/IEC 127-6:1994 adoptée, première édition, 1994-04, y compris l\'Amendement 1:1996, avec exigences propres au Canada)
I.S. EN 12966:2014 ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS
CEI EN 60393-1 : 2010 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
CEI EN 60077-1 : 2002 RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 1: GENERAL SERVICE CONDITIONS AND GENERAL RULES
CEI EN 61757-1 : 2013 FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION
NF EN 302574-1 : 2010 SATELLITE EARTH STATIONS AND SYSTEMS (SES) - HARMONIZED STANDARD FOR SATELLITE EARTH STATIONS FOR MSS OPERATING IN THE 1980 MHZ TO 2010 MHZ (EARTH-TO-SPACE) AND 2170 MHZ TO 2200 MHZ (SPACE-TO-EARTH) FREQUENCY BANDS - PART 1: COMPLEMENTARY GROUND COMPONENT (CGC) FOR WIDEBAND SYSTEMS: HARMONIZED EN COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE R&TTE DIRECTIVE
NF EN 54-29 : 2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 29: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF SMOKE AND HEAT SENSORS
NF EN 61850-3 : 2014 COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 3: GENERAL REQUIREMENTS
PREN 54-28 : DRAFT 2015 FIRE DETECTION AND FIRE ALARM SYSTEM - PART 28: NON-RESETTABLE LINE-TYPE HEAT DETECTORS
DIN EN 60068-2-40:2000-08 ENVIRONMENTAL TESTING - PART 2: TESTS; TEST Z/AM: COMBINED COLD/LOW AIR PRESSURE TESTS
I.S. EN 61757-1:2012 FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012 (EQV))
I.S. EN 60115-8-1:2015 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT (SMD) LOW POWER FILM RESISTORS FOR GENERAL ELECTRONIC EQUIPMENT, CLASSIFICATION LEVEL G
DIN EN 54-30 E : 2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 30: MULTISENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF CARBON MONOXIDE AND HEAT SENSORS
UNE-EN 12405-3:2016 Gas meters - Conversion devices - Part 3: Flow computer
UNE-EN 61557-12:2010 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures -- Part 12: Performance measuring and monitoring devices (PMD)
CEI EN 60945 : 2003 MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - GENERAL REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS
ISO 7240-18:2017 Fire detection and alarm systems — Part 18: Input/output devices
ISO 3930:2000 Instruments for measuring vehicle exhaust emissions
IEC 62908-13-10:2016 Touch and interactive displays - Part 13-10: Reliability test methods of touch displays - Environmental durability test methods
IEC TR 60721-4-5:2001+AMD1:2003 CSV Classification of environmental conditions - Part 4-5: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Ground vehicle installations
ISO 7240-16:2007 Fire detection and alarm systems — Part 16: Sound system control and indicating equipment
I.S. EN 140101:2008 BLANK DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS
NF EN 62246-1 : 2015 REED SWITCHES - PART 1: GENERIC SPECIFICATION
EN IEC 61730-2:2018/AC:2018-06 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2016)
BS EN 138000:1997 Harmonized system of quality assessment for electronic components. Generic specification: fixed inductors for electromagnetic interference suppression (inductors for which safety tests are required)
UNE-IEC 60092-306:2010 Electrical installations in ships - Part 306: Equipment - Luminaires and lighting accessories
I.S. EN 140402:2015 BLANK DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS
I.S. EN 60505:2011 EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS
EN IEC 60068-2-5:2018 Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering
I.S. EN 60068-3-1:2011 ENVIRONMENTAL TESTING - PART 3-1: SUPPORTING DOCUMENTATION AND GUIDANCE - COLD AND DRY HEAT TESTS (IEC 60068-3-1:2011)
IEC 61291-5-2:2017 Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers
IEC TR 61131-4:2004 Programmable controllers - Part 4: User guidelines
BS EN 1300:2013 Secure storage units. Classification for high security locks according to their resistance to unauthorized opening
I.S. EN 62271-1:2017 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR
I.S. EN IEC 61643-352:2018 COMPONENTS FOR LOW-VOLTAGE SURGE PROTECTION - PART 352: SELECTI AND APPLICATION PRINCIPLES FOR TELECOMMUNICATIONS AND SIGNALLIN NETWORK SURGE ISOLATION TRANSFORMERS (SITS)
I.S. EN 61019-1:2005 SURFACE ACOUSTIC WAVE (SAW) RESONATORS - PART 1: GENERIC SPECIFICATION
EN 50470-1:2006 Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C)
IEC 60605-3-5:1996 Equipment reliability testing - Part 3: Preferred test conditions - Section 5: Test cycle 5: Ground mobile equipment - Low degree of simulation
I.S. EN 140401-802:2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 1; 2
EN 60749-43:2017 Semiconductor devices - Mechanical and climatic test methods - Part 43: Guidelines for IC reliability qualification plans
CEI EN 62878-1-1 : 2016 DEVICE EMBEDDED SUBSTRATE - PART 1-1: GENERIC SPECIFICATION - TEST METHODS
IEC TR 60721-4-4:2001+AMD1:2003 CSV Classification of environmental conditions - Part 4-4: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Stationary use at non-weatherprotected locations
I.S. EN 16280:2012 BREATH ALCOHOL TEST DEVICES FOR GENERAL PUBLIC - REQUIREMENTS AND TEST METHODS
I.S. EN 62040-5-3:2017 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 5-3: DC OUTPUT UPS - PERFORMANCE AND TEST REQUIREMENTS
NF EN 54-30 : 2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 30: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF CARBON MONOXIDE AND HEAT SENSORS
EN 62884-1:2017 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement
I.S. EN 60115-8:2012 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTORS (IEC 60115-8:2009 (MOD))
NF EN 50512 : 2009 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS)
I.S. EN 60068-3-7:2002 ENVIRONMENTAL TESTING - PART 3-7: SUPPORTING DOCUMENTATION AND GUIDANCE - MEASUREMENTS IN TEMPERATURE CHAMBERS FOR TESTS A AND B (WITH LOAD)
BS EN 62052-21 : 2004 ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT (IEC 62052-21:2004)
NF EN 302574-2 : 2010 SATELLITE EARTH STATIONS AND SYSTEMS (SES) - HARMONIZED STANDARD FOR SATELLITE EARTH STATIONS FOR MSS OPERATING IN THE 1980 MHZ TO 2010 MHZ (EARTH-TO-SPACE) AND 2170 MHZ TO 2200 MHZ (SPACE TO-EARTH) FREQUENCY BANDS - PART 2: USER EQUIPMENT (UE) FOR WIDEBAND SYSTEMS: HARMONIZED EN COVERING ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE R&TTE DIRECTIVE
I.S. EN 62326-20:2016 PRINTED BOARDS - PART 20: PRINTED CIRCUIT BOARDS FOR HIGHBRIGHTNESS LEDS
I.S. EN 60728-6:2011 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 6: OPTICAL EQUIPMENT
I.S. EN 140401:2009 BLANK DETAIL SPECIFICATION: FIXED LOW POWER FILM SURFACE MOUNT (SMD) RESISTORS
I.S. EN 60068-2-5:2011 ENVIRONMENTAL TESTING - PART 2-5: TESTS - TEST SA: SIMULATED SOLAR RADIATION AT GROUND LEVEL AND GUIDANCE FOR SOLAR RADIATION TESTING
I.S. EN 60835-1-1:1993 METHODS OF MEASUREMENT FOR EQUIPMENT USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS - PART 1: MEASUREMENTS COMMON TO TERRESTRIAL RADIO-RELAY SYSTEMS AND SATELLITE EARTH STATIONS - SECTION ONE: GENERAL
OIML R 80-2 : 2017 ROAD AND RAIL TANKERS WITH LEVEL GAUGING - PART 2: METROLOGICAL CONTROLS AND TESTS
I.S. EN 60664-3:2017 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 3: USE OF COATING, POTTING OR MOULDING FOR PROTECTION AGAINST POLLUTION
CEI EN 60068-2-5 : 2012 ENVIRONMENTAL TESTING - PART 2: TESTS - TEST SA: SIMULATED SOLAR RADIATION AT GROUND LEVEL AND GUIDANCE FOR SOLAR RADIATION TESTING
BS EN 54-7:2001 Fire detection and fire alarm systems Smoke detectors. Point detectors using scattered light, transmitted light or ionization
CEI EN 60728-6 : 2012 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 6: OPTICAL EQUIPMENT
I.S. EN 62689-1:2016 CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS
I.S. EN 54-5:2017 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 5: HEAT DETECTORS - POINT HEAT DETECTORS
I.S. EN 62488-2:2017 POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC
CEI EN 60068-3-4 : 2002 ENVIRONMENTAL TESTING - PART 3-4: SUPPORTING DOCUMENTATION AND GUIDANCE DAMP HEAT TESTS
CEI EN 60068-3-1 : 2013 ENVIRONMENTAL TESTING - PART 3-1: SUPPORTING DOCUMENTATION AND GUIDANCE - COLD AND DRY HEAT TESTS
IEC 60539-1:2016 Directly heated negative temperature coefficient thermistors - Part 1: Generic specification
13/30277397 DC : 0 BS EN 54-11 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 11: MANUAL CALL POINTS
I.S. EN 60728-3:2011 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS
DIN EN 54-7:2015-07 (Draft) FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION
I.S. EN 60393-6:2016 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 6: SECTIONAL SPECIFICATION - SURFACE MOUNT PRESET POTENTIOMETERS
17/30333935 DC : 0 BS EN 1300 - SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING
ETS 300 607-1 : 2015 DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2) (GSM); MOBILE STATION (MS) CONFORMANCE SPECIFICATION; PART 1: CONFORMANCE SPECIFICATION
EN IEC 62246-1-1:2018 Reed switches - Part 1-1: Generic specification - Blank detail specification
OIML R 75-2 : 2002 HEAT METERS - PART 2: TYPE APPROVAL TESTS AND INITIAL VERIFICATION TESTS
ISO 12239:2010 Smoke alarms using scattered light, transmitted light or ionization
I.S. EN 62246-1:2015 REED SWITCHES - PART 1: GENERIC SPECIFICATION
NF EN 61851-22 : 2002 ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 22: A.C. ELECTRIC VEHICLE CHARGING STATION
UNE-EN 60068-2-5:2011 Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing
UNE-EN 12966:2015 Road vertical signs - Variable message traffic signs
UNE-EN 14846:2010 Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods
BIS IS/ISO 7240-15 : 2004 FIRE DETECTION AND ALARM SYSTEMS - PART 15: POINT TYPE FIR E DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION SENSORS IN COMBINATION WITH A HEAT SENSOR
NF EN 301908-13 : JUN 2016 IMT CELLULAR NETWORKS - HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE DIRECTIVE 2014/53/EU - PART 13: EVOLVED UNIVERSAL TERRESTRIAL RADIO ACCESS (E-UTRA) USER EQUIPMENT (UE) (V11.1.1)
NF EN 60068-2-53 : 2010 ENVIRONMENTAL TESTING - PART 2-53: TESTS AND GUIDANCE: COMBINED CLIMATIC (TEMPERATURE/HUMIDITY) AND DYNAMIC (VIBRATION/SHOCK) TESTS
NF EN 50132-4-1 : 2002 ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 4-1: BLACK AND WHITE MONITORS
IEC 61643-351:2016 Components for low-voltage surge protective devices - Part 351: Performance requirements and test methods for telecommunications and signalling network surge isolation transformers (SIT)
I.S. EN 60368-1:2000 PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
I.S. EN 61851-1:2011 ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS
IEC 60605-3-6:1996 Equipment reliability testing - Part 3: Preferred test conditions - Section 6: Test cycle 6: Outdoor transportable equipment - Low degree of simulation
IEC 60115-8-1:2014 Fixed resistors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed surface mount (SMD) low power film resistors for general electronic equipment, classification level G
I.S. EN 140100:2008 SECTIONAL SPECIFICATION: FIXED LOW POWER FILM RESISTORS
IEC 61988-4-1:2015 Plasma display panels - Part 4-1: Environmental testing methods - Climatic and mechanical
I.S. EN 62040-3:2011 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS
IEC 60077-1 REDLINE : 2ED 2017 RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 1: GENERAL SERVICE CONDITIONS AND GENERAL RULES
S.R. CLC/TS 50457-1:2008 CONDUCTIVE CHARGING FOR ELECTRIC VEHICLES - PART 1: D.C. CHARGING STATION
I.S. EN 60115-9:2004 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 9: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTOR NETWORKS WITH INDIVIDUALLY MEASURABLE RESISTORS
IEC 62689-1:2016 Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 1: General principles and requirements
IEC 61261-1:1994 Piezoelectric ceramic filters for use in electronic equipment - A specification in the IEC quality assessment system for electronic components (IECQ) - Part 1: Generic specification - Qualification approval
UNE-EN 54-3:2016 Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders
I.S. EN 60947-8:2003 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES (IEC 60947-8:2003 (EQV))
DIN EN 54-23 :2010-06 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARM DEVICES
DIN EN 54-20 E : 2009 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS
IEC 60664-3:2016 RLV Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
DIN EN 54-18 E : 2006 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 18: INPUT/OUTPUT DEVICES
DIN EN 54-12 E : 2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 12: SMOKE DETECTORS - LINE DETECTORS USING AN OPTICAL BEAM
PD IEC/TS 62647-1:2012 Process management for avionics. Aerospace and defence electronic systems containing lead-free solder Preparation for a lead-free control plan
BS EN 14154-2 : 2005 WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE
EN 54-22:2015 Fire detection and fire alarm systems - Part 22: Resettable line-type heat detectors
IEC 61508-7:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508)
BS EN 61131-2:2007 Programmable controllers Equipment requirements and tests
BS EN 12368:2015 Traffic control equipment. Signal heads
UNE-EN 61508-7:2011 Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 7: Overview of techniques and measures
IEC 61338-2:2004 Waveguide type dielectric resonators - Part 2: Guidelines for oscillator and filter applications
UNE-EN 61851-1:2012 Electric vehicle conductive charging system - Part 1: General requirements
EN 301 908-2 : 7.1.1 IMT CELLULAR NETWORKS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF DIRECTIVE 2014/53/EU; PART 2: CDMA DIRECT SPREAD (UTRA FDD) USER EQUIPMENT (UE)
I.S. EN 50155:2017-11 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRONIC EQUIPMENT
VDS 2116 : 2008 JUNCTION BOXES - REQUIREMENTS
I.S. EN 12368:2015 TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS
EN 15807:2011 Railway applications - Pneumatic half couplings
DIN EN 1434-4:2019-08 Thermal energy meters - Part 4: Pattern approval tests (includes Amendment A1:2018)
EN 60947-5-5 : 1997 AMD 2 2016 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION (IEC 60947-5-5:1997/A2:2016)
DIN EN 54-10:2002-05 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 10: FLAME DETECTORS - POINT DETECTORS
DIN EN 54-3:2001-10 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS
EN 15684:2012 Building hardware - Mechatronic cylinders - Requirements and test methods
DIN EN 1300:2014-05 SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING
IEC 60728-3:2017 Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks
UNI EN 15684 : 2012 BUILDING HARDWARE - MECHATRONIC CYLINDERS - REQUIREMENTS AND TEST METHODS
EN 60947-1:2007/A2:2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014)
I.S. EN 45501:2015 METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
KTA 3505 : 2015(R2017) TYPE TESTING OF MEASURING SENSORS AND TRANSDUCERS OF THE INSTRUMENTATION AND CONTROL SYSTEM IMPORTANT TO SAFETY
DIN EN 12352:2006-07 Traffic control equipment - Warning and safety light devices
I.S. EN 12352:2006 TRAFFIC CONTROL EQUIPMENT - WARNING AND SAFETY LIGHT DEVICES
EN 61557-8:2015/AC:2016-06 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems
EN 45501:2015 METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
VDE 0419-1 : 94 AMD 2 99 TIME SWITCHES FOR TARIFF AND LOAD CONTROL
DIN EN 61270-1 : 1997 CAPACITORS FOR MICROWAVE OVENS - PART 1: GENERAL
VDE 0560-800 : 1998 GENERIC SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE WITH MOTORS
DIN EN 137000 : 1998-03 GENERIC SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE WITH MOTORS
VDE 0557-1 : 2001 LOW-VOLTAGE POWER SUPPLY DEVICES, DC OUTPUT - PERFORMANCE CHARACTERISTICS AND SAFETY REQUIREMENTS
DIN EN 60938-1 : 2008 FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
VDI/VDE 5570 Blatt 3:2017-06 Testing of connectorised and non-connectorised polymer optical fibres (POF) - Testing of mechanical characteristics, environmental influences and aging behaviour
VDE 0830-8-10 : 1998 ALARM SYSTEMS - ACCESS CONTROL SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1: SYSTEM REQUIREMENTS
VDE 0420-1 : 94 AMD 2 99 ELECTRONIC RIPPLE CONTROL RECEIVERS FOR TARIFF AND LOAD CONTROL
VDE 0560-22 : 1997 CAPACITORS FOR MICROWAVE OVENS - PART 1: GENERAL
BS CECC17000(1992) : 1992 AMD 9626 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION - SOLID STATE ALL OR NOTHING RELAYS - GENERIC DATA AND METHODS OF TEST
UNE-EN 60068-2-14:2011 Environmental testing -- Part 2-14: Tests - Test N: Change of temperature
CEI EN 60068-2-61 : 1997 ENVIRONMENTAL TESTING - PART 2: TEST METHODS TEST Z/ABDM: CLIMATIC SEQUENCE
CEI EN 60068-2-14 : 2011 ENVIRONMENTAL TESTING - PART 2-14: TESTS - TEST N: CHANGE OF TEMPERATURE
CEI EN 62974-1 : 1ED 2017 MONITORING AND MEASURING SYSTEMS USED FOR DATA COLLECTION, GATHERING AND ANALYSIS - PART 1: DEVICE REQUIREMENTS
BS EN 62333-3:2010 Noise suppression sheet for digital devices and equipment Characterization of parameters of noise suppression sheet
BS 7401(1990) : 1990 AMD 7673 SPECIFICATION FOR ELECTRONIC RIPPLE CONTROL RECEIVERS FOR TARIFF AND LOAD CONTROL
I.S. EN 61751:1999 LASER MODULES USED FOR TELECOMMUNICATION - RELIABILITY ASSESSMENT
BS EN 15807:2011 Railway applications. Pneumatic half couplings
UNE-EN 50556:2011 Road traffic signal systems
12/30256417 DC : 0 BS EN 54-31 - FIRE DETECTION AND FIRE ALARM SYSTEM - PART 31: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF SMOKE, CARBON MONOXIDE AND OPTIONALLY HEAT SENSORS
EN 60664-3:2017 Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
NF EN 60068 2-5 : 2011 ENVIRONMENTAL TESTING - PART 2-5: TESTS - TEST SA: SIMULATED SOLAR RADIATION AT GROUND LEVEL AND GUIDANCE FOR SOLAR RADIATION TESTING
IEEE C57.15-2009 REDLINE IEEE Standard Requirements, Terminology, and Test Code for Step-Voltage Regulators
DIN EN 54-27 E : 2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 27: DUCT SMOKE DETECTORS
BS 7400(1991) : 1991 AMD 7672 SPECIFICATION FOR ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
BS CECC 64000:1990 Harmonized system of quality assessment for electronic components: generic specification: film resistor networks
EN IEC 62969-1:2018 Semiconductor devices - Semiconductor interface for automotive vehicles - Part 1: General requirements of power interface for automotive vehicle sensors
ISO 11614:1999 Reciprocating internal combustion compression-ignition engines Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
14/30284930 DC : 0 BS EN 62689-2 ED 1.0 - CURRENT AND VOLTAGE SENSORS OR DETECTORS TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 2: GENERAL PRINCIPLES AND REQUIREMENTS
11/30241337 DC : DRAFT JAN 2011 BS EN 61757-1 - FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION
13/30287806 DC : 0 BS EN 60539-1 - DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION
03/318812 DC : DRAFT NOV 2003 IEC 62257-3 TS ED.1 - RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 3: PROJECT DEVELOPMENT AND MANAGEMENT
BS EN 60115-2:2015 Fixed resistors for use in electronic equipment Sectional specification: Leaded fixed low power film resistors
BS ISO 16437:2012 Ships and marine technology. Lifesaving and fire protection. Atmospheric oil mist detectors for ships
BS EN 61643-311:2013 Components for low-voltage surge protective devices Performance requirements and test circuits for gas discharge tubes (GDT)
10/30217405 DC : 0 BS EN 50556 - ROAD TRAFFIC SIGNAL SYSTEMS
07/30162213 DC : 0 BS EN 60747-15 - SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 15: ISOLATED POWER SEMICONDUCTOR DEVICES
06/30153438 DC : DRAFT JULY 2006 BS IEC 60539-1 ED.2 - DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORES - PART 1: GENERIC SPECIFICATION
17/30296023 DC : DRAFT MAR 2017 BS ISO 19453-4 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT FOR DRIVE SYSTEM OF ELECTRIC PROPULSION VEHICLES - PART 4: CLIMATIC LOADS
05/30134095 DC : DRAFT MAY 2005 IEC 61587-1 ED 2 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND 60297 - PART 1: CLIMATIC, MECHANICAL TESTS AND SAFETY ASPECTS FOR CABINETS, RACKS AND SUBRACKS
ISO 7240-6:2011 Fire detection and alarm systems — Part 6: Carbon monoxide fire detectors using electro-chemical cells
13/30264591 DC : 0 BS EN 60747-14-6 ED 1.0 - SEMICONDUCTOR DEVICES - PART 14-6: SEMICONDUCTOR SENSORS - HUMIDITY SENSOR
09/30196772 DC : 0 BS ISO 7240-24 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: SOUND-SYSTEM LOUDSPEAKERS
11/30236311 DC : 0 BS ISO 7240-10 - FIRE DETECTION AND ALARM SYSTEMS - PART 10: POINT-TYPE FLAME DETECTORS
BS EN 62488-2:2017 Power line communication systems for power utility applications Analogue power line carrier terminals or APLC
CEI EN 62421 : 2008 ELECTRONICS ASSEMBLY TECHNOLOGY - ELECTRONIC MODULES
BS ISO 17089-1:2010 Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement
CEI EN 60115-8-1 : 2016 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT (SMD) LOW POWER FILM RESISTORS FOR GENERAL ELECTRONIC EQUIPMENT, CLASSIFICATION LEVEL G
BS EN 54-22:2015 Fire detection and fire alarm systems Resettable line-type heat detectors
BS EN 50512:2009 Electrical installations for lighting and beaconing of aerodromes. Advanced visual docking guidance systems (A-VDGS)
UNE-EN 50512:2011 Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking Guidance Systems (A-VDGS)
DIN CEN ISO/TS 14907-1;DIN SPEC 91192:2015-12 ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 1: DESCRIPTION OF TEST PROCEDURES (ISO/TS 14907-1:2015)
BS EN ISO 4064-2:2017 Water meters for cold potable water and hot water Test methods
UNI EN 15807 : 2011 RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS
NF EN 61582 : 2006 RADIATION PROTECTION INSTRUMENTATION - IN VIVO COUNTERS - CLASSIFICATION, GENERAL REQUIREMENTS AND TEST PROCEDURES FOR PORTABLE, TRANSPORTABLE AND INSTALLED EQUIPMENT
11/30252930 DC : 0 BS EN 60747-5-7 - SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-7: PHOTODIODES AND PHOTOTRANSISTORS
97/231700 DC : DRAFT DEC 1997 IEC 60115-1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
I.S. EN 62052-21:2004 ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT
15/30323391 DC : 0 BS EN 62572-3 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - RELIABILITY STANDARDS PART 3: LASER MODULES USED FOR TELECOMMUNICATION
CEI EN 60728-3 : 2011 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS
13/30277892 DC : 0 BS EN 62572-3 ED 2.0 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - RELIABILITY STANDARDS - PART 3: LASER MODULES USED FOR TELECOMMUNICATION
ISO 7240-10:2012 Fire detection and alarm systems — Part 10: Point-type flame detectors
BS EN 60215:1996 Safety requirements for radio transmitting equipment
02/208921 DC : DRAFT AUG 2002 IEC 62052-21 ED.1 - ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT
11/30205538 DC : 0 BS EN 54-5 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 5: HEAT DETECTORS - POINT DETECTORS
13/30280588 DC : 0 BS ISO 7240-28 - FIRE DETECTION AND ALARM SYSTEMS - PART 28: FIRE PROTECTION CONTROL EQUIPMENT
08/30181001 DC : DRAFT APR 2008 BS EN 50512 - ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS)
BS EN 140000:1995 Harmonized system of quality assessment for electronic components. Generic specification: fixed resistors
10/30218017 DC : 0 BS ISO 7240-11 - FIRE DETECTION AND ALARM SYSTEMS - PART 11: MANUAL CALL POINTS
UNE-EN 62586-1:2014 Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI)
UNE-EN 62718:2016 Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps
BS EN 50486:2008 Equipment for use in audio and video door-entry systems
I.S. EN 61514-2:2013 INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY (IEC 61514-2:2013 (EQV))
BS CECC 22000:1980 Harmonized system of quality assessment for electronic components: generic specification: radio frequency coaxial connectors
ISO 7240-2:2017 Fire detection and alarm systems — Part 2: Fire detection control and indicating equipment
13/30279156 DC : 0 BS EN 6101-2-012 ED.1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
BS IEC 61988-4-1:2015 Plasma display panels Environmental testing methods. Climatic and mechanical
UNI CEI EN ISO 4064-2 : 2014 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
BS EN IEC 62246-1-1:2018 Reed switches Generic specification. Blank detail specification
BS EN 61019-1:2005 Surface acoustic wave (SAW) resonators Generic specification
12/30254899 DC : 0 BS EN 54-2 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT
BS EN 60947-5-3:2013 Low-voltage switchgear and controlgear Control circuit devices and switching elements. Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
BS CECC 22120:1981 Harmonized system of quality assessment for electronic components: sectional specification: radio frequency coaxial connectors, series BNC
DIN EN 15684:2013-01 Building hardware - Mechatronic cylinders - Requirements and test methods
UNI EN 16280 : 2013 BREATH ALCOHOL TEST DEVICES FOR GENERAL PUBLIC - REQUIREMENTS AND TEST METHODS
BS EN 16280:2012 Breath alcohol test devices for general public. Requirements and test methods
BS EN 140401-801 : 2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25; 0,5; 1
DD IEC TS 62257-3 : DRAFT 2004 RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 3: PROJECT DEVELOPMENT AND MANAGEMENT
TS 136 112 : 14.0.0 LTE; LOCATION MEASUREMENT UNIT (LMU) CONFORMANCE SPECIFICATION; NETWORK BASED POSITIONING SYSTEMS IN EVOLVED UNIVERSAL TERRESTRIAL RADIO ACCESS NETWORK (E-UTRAN) (3GPP TS 36.112 VERSION 14.0.0 RELEASE 14)
BS EN 140401-803 : 2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - CYLINDRICAL - STABILITY CLASSES 0,05; 0,1; 0,25; 0,5; 1; 2
BS EN 61169-1:2013 Radio-frequency connectors Generic specification. General requirements and measuring methods
I.S. EN 61337-2:2004 FILTERS USING WAVEGUIDE TYPE DIELECTRIC RESONATORS - PART 2: GUIDANCE FOR USE
CEI 56-22 : 2000 EQUIPMENT RELIABILITY TESTING - PART 3: PREFERRED TEST CONDITIONS - SECTION 6: TEST CYCLE 6: OUTDOOR TRANSPORTABLE EQUIPMENT - LOW DEGREE OF SIMULATION
BS ISO 18185-3:2006 Freight containers. Electronic seals Environmental characteristics
13/30287884 DC : 0 BS EN 61988-4-1 ED 1.0 - PLASMA DISPLAY PANELS - PART 4-1: ENVIRONMENTAL TESTING METHODS - CLIMATIC AND MECHANICAL
TR 101 576 : 1.1.1 ENVIRONMENTAL ENGINEERING (EE); RECOMMENDATION FOR THE APPLICABILITY OF ENVIRONMENTAL CLASSES IN OUTDOOR CABINET ENVIRONMENT
IEC TR 62572-2:2008 Fibre optic active components and devices - Reliability standards - Part 2: Laser module degradation
UNE-EN 13637:2016 Building hardware - Electrically controlled exit systems for use on escape routes - Requirements and test methods
BS EN 60368-1:2000 Piezoelectric filters Generic specification
04/30112673 DC : DRAFT APR 2004 IEC 62314 ED.1 - SOLID-STATE RELAYS
11/30254162 DC : 0 BS EN 45501 - METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
09/30209389 DC : 0 BS EN 60115-8-1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION - FIXED CHIP RESISTORS - ASSESSMENT LEVEL E
CEI EN 60368-1 : 2006 PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
12/30254902 DC : DRAFT JAN 2012 BS EN 54-10 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 10: FLAME DETECTORS - POINT DETECTORS
PD IEC/TS 62257-3:2015 Recommendations for renewable energy and hybrid systems for rural electrification Project development and management
OIML R 137-1 : 2006 GAS METERS - PART 1: REQUIREMENTS
I.S. EN 13637:2015 BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
BS EN 60728-5:2008 Cable networks for television signals, sound signals and interactive services Headend equipment
OIML R 129 : 2000 MULTI-DIMENSIONAL MEASURING INSTRUMENTS
09/30202799 DC : 0 BS EN 1300:2004/A1 - SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING
04/30124466 DC : DRAFT OCT 2004 EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
BS EN 61291-5-2:2017 Optical amplifiers Qualification specifications. Reliability qualification for optical fibre amplifiers
I.S. EN 60115-2:2015 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: LEADED FIXED LOW POWER FILM RESISTORS
11/30255443 DC : 0 BS EN 60068-2-39 - ENVIRONMENTAL TESTING - PART 2-39: TESTS AND GUIDANCE: COMBINED TEMPERATURE OR TEMPERATURE AND HUMIDITY WITH LOW AIR PRESSURE TESTS
07/30172925 DC : 0 BS IEC 60951-1 - NUCLEAR POWER PLANTS - INSTRUMENTATION IMPORTANT TO SAFETY - RADIATION MONITORING SYSTEM FOR ACCIDENT AND POST ACCIDENT CONDITIONS - PART 1: GENERAL REQUIREMENTS
06/30127082 DC : 0 EN 50486 - EQUIPMENT FOR USE IN AUDIO AND VIDEO DOOR - ENTRY SYSTEMS
BS QC 763000(1990) : AMD 6754 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS. FILM AND HYBRID FILM INTEGRATED CIRCUITS. GENERIC SPECIFICATION
BS EN 60068-2-40:2000 Environmental testing. Test methods Test Z/AM. Combined cold/low air pressure tests
UNI EN 54-24 : 2008 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS
15/30294923 DC : 0 BS EN 61291-5-2 ED2.0 - OPTICAL AMPLIFIERS - PART 5-2: QUALIFICATION SPECIFICATIONS - RELIABILITY QUALIFICATION FOR OPTICAL FIBRE AMPLIFIERS
BIS IS/IEC 60862-1 : 2003 SURFACE ACOUSTIC WAVE (SAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
06/30155922 DC : 0 BS EN 140100 - SECTIONAL SPECIFICATION - FIXED LOW POWER FILM RESISTORS
BS EN 63005-1:2017 Event video data recorder for road vehcle accidents Basic requirements
10/30184605 DC : 0 BS EN 61643-313 ED 1.0 - COMPONENTS FOR LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 313: SELECTION AND APPLICATION PRINCIPLES FOR GAS DISCHARGE TUBES (GDT)
BS 2011-5.2:1992 Environmental testing. Guide to drafting of test methods Terms and definitions
CSA C22.2 No. 61010-2-012 : 2017 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
10/30234803 DC : 0 BS EN 61169-1 ED.2 - RADIO FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS
BS EN 50463:2007 Railway applications. Energy measurement on board trains
DIN EN 54-26 E : 2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 26: CARBON MONOXIDE DETECTORS - POINT DETECTORS
17/30352646 DC : 0 BS IEC 63034 ED 1.0 - MICROSPEAKERS (TC 100)
CEI EN 62052-21 : 2005 ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT
BS EN 168000:1996 Harmonized system of quality assessment for electronic components. Generic specification: quartz crystal units
06/30155905 DC : DRAFT SEP 2006 BS EN 140401-803 - DETAIL SPECIFICATION - FIXED LOW POWER FILM SMD RESISTORS - CYLINDRICAL - STABILITY CLASSES 0,05; 0,1; 0,25; 0,5; 1; 2
BS EN 62246-1-1:2013 Reed switches Generic specification. Quality assessment
BS EN 54-25:2008 Fire detection and fire alarm systems Components using radio links
CEI EN 62333-3 : 2011 NOISE SUPPRESSION SHEET FOR DIGITAL DEVICES AND EQUIPMENT - PART 3: CHARACTERIZATION OF PARAMETERS OF NOISE SUPPRESSION SHEET
15/30329267 DC : 0 BS EN 60747-17 - SEMICONDUCTOR DEVICES - PART 17: MAGNETIC AND CAPACITIVE COUPLER FOR BASIC AND REINFORCED ISOLATION
16/30336979 DC : 0 BS EN 60664-3 - INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW VOLTAGE SYSTEMS - PART 3: USE OF COATING, POTTING OR MOULDING FOR PROTECTION AGAINST POLLUTION
CEI EN 61587-1 : 2012 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITION USE AND TRANSPORTATION
11/30243827 DC : 0 BS ISO 16437 - SHIPS AND MARINE TECHNOLOGY - LIFESAVING AND FIRE PROTECTION - ATMOSPHERIC OIL MIST DETECTORS
EN 62974-1:2017 Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements
PREN 12966 : DRAFT 2013 ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS
IEC 62828-1:2017 Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General procedures for all types of transmitters
14/30317306 DC : 0 BS EN 60115-8-1:2014+A1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT (SMD) LOW POWER FILM RESISTORS FOR GENERAL ELECTRONIC EQUIPMENT, CLASSIFICATION LEVEL G
CSA E60127.6 : 2003 : R2012 MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS
CEI EN 62884-1 : 1ED 2018 MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT
11/30240406 DC : 0 BS ISO 7240-5 - FIRE DETECTION AND ALARM SYSTEMS - PART 5: POINT-TYPE HEAT DETECTORS
BS EN 54-30:2015 Fire detection and fire alarm systems Multi-sensor fire detectors. Point detectors using a combination of carbon monoxide and heat sensors
UNE-EN 61020-1:2011 Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification
EN 62040-3:2011 Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
09/30193520 DC : 0 BS EN 60947-5-3 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDF)
NF EN 300721 : 2000 SATELLITE EARTH STATIONS AND SYSTEMS (SES) - MOBILE EARTH STATIONS (MES) PROVIDING LOW BIT RATE DATA COMMUNICATIONS (LBRDC) USING LOW EARTH ORBITING (LEO) SATELLITES OPERATING BELOW 1 GHZ
EN 50463-2:2017 Railway applications - Energy measurement on board trains - Part 2: Energy measuring
NF EN 60938-1 : 2008 AMD 1 2008 FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
BS EN 50136-2-1:1998 Alarm systems. Alarm transmission systems and equipment General requirements for alarm transmission equipment
IEC 61338-1-2:1998 Waveguide type dielectric resonators - Part 1-2: General information and test conditions - Test conditions
CEI 79-17 : 2002 PROTECTION SYSTEMS FOR UNAUTHORIZED USE OF MOTOR VEHICLES - PARTICULAR REQUIREMENTS FOR THE PROTECTION SYSTEMS AGAINST THE THEFT FOR COMMERCIAL VEHICLES
I.S. EN 62149-3:2014 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 3: MODULATOR-INTEGRATED LASER DIODE TRANSMITTERS FOR 2,5-GBIT/S TO 40-GBIT/S FIBRE OPTIC TRANSMISSION SYSTEMS
TS 137 141 : 13.2.0 DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2+) (GSM); UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); LTE; E-UTRA, UTRA AND GSM/EDGE; MULTI-STANDARD RADIO (MSR) BASE STATION (BS) CONFORMANCE TESTING (3GPP TS 37.141 VERSION 14.7.0 RELEASE 14)
SAE USCAR 27 : 2007 SPECIFICATION FOR TESTING GAS DISCHARGE LIGHT SOURCE SUBSYSTEM
NF ISO 22188 : 2006 MONITORING FOR INADVERTENT MOVEMENT AND ILLICIT TRAFFICKING OF RADIOACTIVE MATERIAL
CAN/CSA-C22.2 NO. 60947-1-13 (R2018) Low-voltage switchgear and controlgear - Part 1: General rules (Tri-national standard, with UL 60947-1 and NMX-J-515-ANCE)
IEC 60092-504 REDLINE : 4ED 2016 ELECTRICAL INSTALLATIONS IN SHIPS - PART 504: AUTOMATION, CONTROL AND INSTRUMENTATION
IEC 62327:2017 Radiation protection instrumentation - Hand-held instruments for the detection and identification of radionuclides and for the estimation of ambient dose equivalent rate from photon radiation
UNE-EN 15807:2011 Railway applications - Pneumatic half couplings
IEC 62974-1:2017 Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements
EN 54-5:2017 Fire detection and fire alarm systems - Part 5: Heat detectors - Point heat detectors
NF EN 62052-11 : 2003 AMD 1 2017 ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT
BS 5760-13.6:1997 Reliability of systems, equipment and components. Guide to reliability test conditions for consumer equipment Outdoor transportable equipment. Low degree of simulation
BS EN 61587-1:2017 Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297 series Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation
BS EN 60115-1 : 2011 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
ISO 19453-4:2018 Road vehicles — Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles — Part 4: Climatic loads
BS EN 167000:1993 Harmonized system of quality assessment for electronic components. Generic specification: piezoelectric filters
IEC 62599-1:2010 Alarm systems - Part 1: Environmental test methods
IEC 60092-504:2016 Electrical installations in ships - Part 504: Automation, control and instrumentation
CEI EN 50463-2 : 2013 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING
CEI EN 60770-1 : 2014 TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
I.S. EN 50470-1:2006 ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C)
EN 1434-4:2015 Heat meters - Part 4: Pattern approval tests
BS EN 60947-5-5:1998 Low-voltage switchgear and controlgear Control circuit devices and switching elements. Electrical emergency stop devices with mechanical latching function
BS EN 140402 : 2015 BLANK DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS
I.S. EN 60947-5-3:2013 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB)
I.S. EN 62752:2016&AC:2019-03 IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD)
I.S. EN 140401-804:2011 DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25
I.S. EN 12405-3:2015 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
CEI EN 60068-2-48 : 2000 ENVIRONMENTAL TESTING - PART 2: TESTS - GUIDANCE ON THE APPLICATION OF THE TESTS OF IEC PUBLICATION 60068 TO SIMULATE THE EFFECTS OF STORAGE
BS EN 62271-1:2017 High-voltage switchgear and controlgear Common specifications for alternating current switchgear and controlgear
BS EN 12405-1 : 2005 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
I.S. EN 60077-1:2017 RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 1: GENERAL SERVICE CONDITIONS AND GENERAL RULES
ISO 17363:2013 Supply chain applications of RFID Freight containers
I.S. EN 140101-806:2009 DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS - METAL FILM RESISTORS ON HIGH GRADE CERAMIC, CONFORMAL COATED OR MOLDED, AXIAL OR PREFORMED LEADS
CEI EN 60122-1 : 2004 QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
I.S. EN 12405-1:2005 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
ISO 21927-9:2012 Smoke and heat control systems — Part 9: Specification for control equipment
I.S. EN 138000:1998 FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED) (GENERIC SPECIFICATION)
I.S. EN 61300-2-17:2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-17: TESTS - COLD
I.S. EN 54-22:2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 22: RESETTABLE LINE-TYPE HEAT DETECTORS
I.S. EN 61338-1:2005 WAVEGUIDE TYPE DIELECTRIC RESONATORS - PART 1: GENERIC SPECIFICATION
I.S. EN 54-7:2000 COMPONENTS OF AUTOMATIC FIRE DETECTION SYSTEMS - POINT-TYPE SMOKE DETECTORS - DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION
OIML R 139 : 2007 COMPRESSED GASEOUS FUEL MEASURING SYSTEMS FOR VEHICLES
I.S. EN 61643-351:2017 COMPONENTS FOR LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 351: PERFORMANCE REQUIREMENTS AND TEST METHODS FOR TELECOMMUNICATIONS AND SIGNALLING NETWORK SURGE ISOLATION TRANSFORMERS (SIT)
OIML R 49-2 : 2013 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
PREN 14846 : DRAFT 2015 BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS
I.S. EN 61557-12:2008 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 12: PERFORMANCE MEASURING AND MONITORING DEVICES (PMD)
CLC/TS 50457-1:2008 Conductive charging for electric vehicles - Part 1: D.C. charging station
IEC TR 60721-4-6:2001+AMD1:2003 CSV Classification of environmental conditions - Part 4-6: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Ship environment
NF EN 60127-6 : 2014 MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS
ISO/TS 7240-29:2017 Fire detection and alarm systems — Part 29: Video fire detectors
PREN 1434-4 : DRAFT 2014 HEAT METERS - PART 4: PATTERN APPROVAL TESTS
BS EN 140401-804 : 2011 DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25
CSA C61869-1 : 2014 INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
OIML R 35-2 : 2011 MATERIAL MEASURES OF LENGTH FOR GENERAL USE - PART 2: TEST METHODS
BS EN 140401:2009 Blank Detail Specification. Fixed low power film surface mount (SMD) resistors
I.S. EN 133000:1998 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (GENERIC SPECIFICATION)
I.S. EN 61036:1997 ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
IEC 62679-4-2:2016 Electronic paper displays - Part 4-2: Environmental test methods
NF EN 50155 : 2007 RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK
NF EN 50556 : 2011 ROAD TRAFFIC SIGNAL SYSTEMS
IEEE/ANSI N42.48-2008 American National Standard Performance Requirements for Spectroscopic Personal Radiation Detectors (SPRDs) for Homeland Security
I.S. EN 62718:2016 RAILWAY APPLICATIONS - ROLLING STOCK - DC SUPPLIED ELECTRONIC BALLASTS FOR LIGHTING FLUORESCENT LAMPS
TS 145 005 : 13.0.0 DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2+) (GSM); GSM/EDGE RADIO TRANSMISSION AND RECEPTION (3GPP TS 45.005 VERSION 14.4.0 RELEASE 14)
I.S. EN 60068-2-53:2010 ENVIRONMENTAL TESTING - PART 2-53: TESTS AND GUIDANCE: COMBINED CLIMATIC (TEMPERATURE/HUMIDITY) AND DYNAMIC (VIBRATION/SHOCK) TESTS
I.S. EN 62884-1:2017 MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT
I.S. EN 61300-1:2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE
NF EN 60068 2-48 : 2000 ENVIRONMENTAL TESTING - PART 2: TESTS - GUIDANCE ON THE APPLICATION OF THE TEST OF IEC 60068 TO SIMULATE THE EFFECTS OF STORAGE
CEI EN 60068-2-40 : 2000 ENVIRONMENTAL TESTING - PART 2: TESTS - TEST Z/AM: COMBINED COLD/LOW AIR PRESSURE TESTS
OIML R 126 : 2012 EVIDENTIAL BREATH ANALYZERS
CEI EN 60747-5-2 : 2002 DISCRETE SEMICONDUCTOR DEVICES AND INTEGRATED CIRCUITS - PART 5-2: OPTOELECTRONIC DEVICES - ESSENTIAL RATINGS AND CHARACTERISTICS
TS 125 153 : 13.0.0 UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); UTRA REPEATER CONFORMANCE TESTING (LCR TDD) (3GPP TS 25.153 VERSION 13.0.0 RELEASE 13)
NFS 61 023 : 2004 XP FIRE DETECTION SYSTEMS (FDS) USING RADIO LINKS
UNI EN 54-16 : 2008 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 16: VOICE ALARM CONTROL AND INDICATING EQUIPMENT
NF EN 60393-6 : 2016 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 6: SECTIONAL SPECIFICATION - SURFACE MOUNT PRESET POTENTIOMETERS
NF EN 300019 2-3 : 2016 ENVIRONMENTAL ENGINEERING (EE) - ENVIRONMENTAL CONDITIONS AND ENVIRONMENTAL TESTS FOR TELECOMMUNICATIONS EQUIPMENT - PART 2-3: SPECIFICATION OF ENVIRONMENTAL TESTS - STATIONARY USE AT WEATHERPROTECTED LOCATIONS (V2.4.1)
EN 54-12:2015 Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam
ISO 7240-27:2009 Fire detection and alarm systems Part 27: Point-type fire detectors using a scattered-light, transmitted-light or ionization smoke sensor, an electrochemical-cell carbon-monoxide sensor and a heat sensor
ISO 21927-10:2011 Smoke and heat control systems — Part 10: Specification for power output devices
ISO 17089-1:2010 Measurement of fluid flow in closed conduits - Ultrasonic meters for gas Part 1: Meters for custody transfer and allocation measurement
I.S. EN 60393-1:2009 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
ISO 7240-22:2017 Fire detection and alarm systems — Part 22: Smoke-detection equipment for ducts
ISO 7240-17:2009 Fire detection and fire alarm systems Part 17: Short-circuit isolators
ISO 7240-24:2016 Fire detection and fire alarm systems Part 24: Fire alarm loudspeakers
IEC 60748-23-1:2002 Semiconductor devices - Integrated circuits - Part 23-1: Hybrid integrated circuits and film structures - Manufacturing line certification - Generic specification
IEC 60077-2 REDLINE : 2ED 2017 RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 2: ELECTROTECHNICAL COMPONENTS - GENERAL RULES
I.S. EN 61300-2-20:1998 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-20: TESTS - CLIMATIC SEQUENCE
IEC 60115-1:2008 Fixed resistors for use in electronic equipment - Part 1: Generic specification
I.S. EN 50463:2007 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS
IEC 60115-8:2009 Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors
IEC 60605-3-4:1992 Equipment reliability testing - Part 3: Preferred test conditions - Section 4: Test cycle 4: Equipment for portable and non-stationary use - Low degree of simulation
IEC TR 60721-4-1:2001+AMD1:2003 CSV Classification of environmental conditions - Part 4-1: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Storage
IEC PAS 60747-17:2011 Semiconductor devices - Discrete devices - Part 17: Magnetic and capacitive coupler for basic and reinforced isolation
IEC TR 60721-4-2:2001+AMD1:2003 CSV Classification of environmental conditions - Part 4-2: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Transportation
IEC 60728-3:2017 RLV Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks
IEC TS 63066:2017 Low-voltage docking connectors for removable energy storage units
IEC 62969-1:2017 Semiconductor devices - Semiconductor interface for automotive vehicles - Part 1: General requirements of power interface for automotive vehicle sensors
IEC 60076-21:2011 Power transformers - Part 21: Standard requirements, terminology, and test code for step-voltage regulators
I.S. EN 14846:2008 BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS
IEC 62103:2003 Electronic equipment for use in power installations
I.S. EN 60938-1:1999 FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
IEC 60780:1998 Nuclear power plants - Electrical equipment of the safety system - Qualification
IEC 60393-1:2008 Potentiometers for use in electronic equipment - Part 1: Generic specification
I.S. EN 61204:1996 LOW-VOLTAGE POWER SUPPLY DEVICES, D.C. OUTPUT - PERFORMANCE CHARACTERISTICS
IEC 60747-10:1991 Semiconductor devices - Part 10: Generic specification for discrete devices and integrated circuits
I.S. EN 61587-1:2017 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITION USE AND TRANSPORTATION
IEC 61196-1-201:2009 Coaxial communication cables - Part 1-201: Environmental test methods - Test for cold bend performance of cable
IEC 61051-1:2007 Varistors for use in electronic equipment - Part 1: Generic specification
I.S. EN 60115-1:2011 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION (IEC 60115-1:2008, MODIFIED)
IEC 60077-2:2017 Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules
I.S. EN 62211:2017 INDUCTIVE COMPONENTS - RELIABILITY MANAGEMENT
IEC 61730-2:2016 Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing
I.S. EN 61747-5:1999 LIQUID CRYSTAL AND SOLID-STATE DISPLAY DEVICES - PART 5: ENVIRONMENTAL, ENDURANCE AND MECHANICAL TEST METHODS
I.S. EN 61557-9:2015 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 9: EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS
DIN EN 12352:2015-02 (Draft) TRAFFIC CONTROL EQUIPMENT - WARNING AND SAFETY LIGHT DEVICES
DIN EN 14637 E : 2008 BUILDING HARDWARE - ELECTRICALLY CONTROLLED HOLD-OPEN SYSTEMS FOR FIRE/SMOKE DOOR ASSEMBLIES - REQUIREMENTS, TEST METHODS, APPLICATION AND MAINTENANCE
IEEE 2030.1.1-2015 IEEE Standard Technical Specifications of a DC Quick Charger for Use with Electric Vehicles
BS EN 54-17:2005 Fire detection and fire alarm systems Short-circuit isolators
IEC 60368-1:2000+AMD1:2004 CSV Piezoelectric filters of assessed quality - Part 1: Genericspecification
IEC 61038:1990+AMD1:1996+AMD2:1998 CSV Electricity metering - Tariff and load control - Particular requirements for time switches
UNE-EN 61557-8:2016 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems
BS EN 54-21:2006 Fire detection and fire alarm systems Alarm transmission and fault warning routing equipment
IEC 60947-5-3:2013 Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
IEC 61169-1:2013 Radio frequency connectors - Part 1: Generic specification - General requirements and measuring methods
IEC 62341-5:2009 Organic light emitting diode (OLED) displays - Part 5: Environmental testing methods
UNE-EN 45501:2016 Metrological aspects of non-automatic weighing instruments
IEC 62604-1:2015 Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 1: Generic specification
IEC 60393-6:2015 Potentiometers for use in electronic equipment - Part 6: Sectional specification - Surface mount preset potentiometers
IEC 61643-311:2013 Components for low-voltage surge protective devices - Part 311: Performance requirements and test circuits for gas discharge tubes (GDT)
IEC 60947-5-8:2006 Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching elements - Three-position enabling switches
DIN EN 54-17 E : 2006 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 17: SHORT-CIRCUIT ISOLATORS
BS EN 14637:2007 Building hardware. Electrically controlled hold-open systems for fire/smoke door assemblies. Requirements, test methods, application and maintenance
IEC 61514-2:2013 Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly
IEC 61337-1:2004 Filters using waveguide type dielectric resonators - Part 1: Generic specification
IEC 61582:2004 Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures for portable, transportable and installed equipment
IEC 60068-3-7:2001 Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load)
IEC 62575-1:2015 Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality - Part 1: Generic specification
EN 62149-3:2014 Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 2,5-Gbit/s to 40-Gbit/s fibre optic transmission systems
EN 14803 : 2006 IDENTIFICATION AND/OR DETERMINATION OF THE QUANTITY OF WASTE
UNE-EN 60664-3:2004 Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
EN 1300:2013 Secure storage units - Classification for high security locks according to their resistance to unauthorized opening
UNI EN 54-3 : 2014 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS
UNE-EN 14154-2:2005 Water meters - Part 2 : Installation and conditions of use
EN 60068-3-7:2002 Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load)
EN 140401-804:2011/A1:2013 DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25
EN 50155:2017 Railway applications - Rolling stock - Electronic equipment
EN 301 908-11 : 5.2.1 IMT CELLULAR NETWORKS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE DIRECTIVE 2014/53/EU; PART 11: CDMA DIRECT SPREAD (UTRA FDD) REPEATERS
I.S. EN 14803:2006 IDENTIFICATION AND/OR DETERMINATION OF THE QUANTITY OF WASTE
EN 61007:1997 Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures
UNE-EN 12966-1:2006 Road vertical signs - Variable message traffic signs - Part 1: Product standard
UNE-EN 60947-8:2005 Low-voltage switchgear and controlgear -- Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines
EN 13763-26 : 2004 EXPLOSIVES FOR CIVIL USES - DETONATORS AND RELAYS - PART 26: DEFINITIONS, METHODS AND REQUIREMENTS FOR DEVICES AND ACCESSORIES FOR RELIABLE AND SAFE FUNCTION OF DETONATORS AND RELAYS
UNI EN 54-23 : 2010 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARM DEVICES
UNI EN 54-20 : 2006 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS
UNI EN 14154-2 : 2011 WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE
UNI EN 12352 : 2006 TRAFFIC CONTROL EQUIPMENT - WARNING AND SAFETY LIGHT DEVICES
IEC TS 62647-1:2012 Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 1: Preparation for a lead-free control plan
NF EN 54-7 : 2001 AMD 2 2006 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION
UNE-EN 54-16:2010 Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment
08/30177575 DC : DRAFT FEB 2008 BS EN 61300-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE
11/30217192 DC : 0 BS EN ISO 4064-2 - WATER METERS INTENDED FOR THE METERING OF COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
SAE USCAR 33 : 2013 SPECIFICATION FOR TESTING AUTOMOTIVE LED MODULES
I.S. EN 15807:2011 RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS
ISO 7240-12:2014 Fire detection and alarm systems Part 12: Line type smoke detectors using a transmitted optical beam
NF EN 300019 2-4 : 2016 ENVIRONMENTAL ENGINEERING (EE) - ENVIRONMENTAL CONDITIONS AND ENVIRONMENTAL TESTS FOR TELECOMMUNICATIONS EQUIPMENT - PART 2-4: SPECIFICATION OF ENVIRONMENTAL TESTS - STATIONARY USE AT NON-WEATHERPROTECTED LOCATIONS (V2.4.1)
DIN EN 54-3:2014-09 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS
UNI EN 1300 : 2014 SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING
BS EN 60694:1997 Common specifications for high-voltage switchgear and controlgear standards
BS EN 1434-4 : 2015 HEAT METERS - PART 4: PATTERN APPROVAL TESTS
BS EN 62604-1:2015 Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality Generic specification
BS EN 60728-14:2014 Cable networks for television signals, sound signals and interactive services Optical transmission systems using RFoG technology
BS EN 60728-6:2011 Cable networks for television signals, sound signals and interactive services Optical equipment
08/30176946 DC : DRAFT JAN 2008 BS EN 60770-1 - TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
05/30136363 DC : DRAFT JUL 2005 IEC 60255-6 ED 3 - ELECTRICAL RELAYS - PART 6: GENERAL REQUIREMENTS FOR MEASURING RELAYS AND PROTECTION EQUIPMENT
03/309760 DC : DRAFT JUNE 2003 IEC 62257-3 - RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 3: PROJECT DEVELOPMENT AND MANAGEMENT
01/205932 DC : DRAFT AUG 2001 BS 8431 - CODE OF PRACTICE FOR ELECTRICAL STATIC METERING FOR SECONDARY OR SUB-METERING
BS EN 60945:2002 Maritime navigation and radiocommunication equipment and systems. General requirements. Methods of testing and required test results
BS EN 60689:2009 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values
05/30137416 DC : 0
BS IEC 60092-504:2016 Electrical installations in ships Automation, control and instrumentation
BS EN 140100:2008 Sectional specification. Fixed low power film resistors
CEI 45-60 : 2009 NUCLEAR POWER PLANTS - ELECTRICAL EQUIPMENT OF THE SAFETY SYSTEM - QUALIFICATION
NF EN 302574-3 : 2010 SATELLITE EARTH STATIONS AND SYSTEMS (SES) - HARMONIZED STANDARD FOR SATELLITE EARTH STATIONS FOR MSS OPERATING IN THE 1980 MHZ TO 2010 MHZ (EARTH-TO-SPACE) AND 2170 MHZ TO 2200 MHZ (SPACE-TO-EARTH) FREQUENCY BANDS - PART 3: USER EQUIPMENT (UE) FOR NARROWBAND SYSTEMS: HARMONIZED EN COVERING ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE R&TTE DIRECTIVE
09/30198417 DC : DRAFT JAN 2009 BS EN 60505 - EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS
12/30260802 DC : 0 BS EN 62391-1 - FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
07/30149142 DC : 0 BS IEC 60115-1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS EN 60939-3:2015 Passive filter units for electromagnetic interference suppression Passive filter units for which safety tests are appropriate
NF EN 61051-1 : 2013 VARISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
CEI EN 61514 : 2002 INDUSTRIAL-PROCESS CONTROL SYSTEMS - METHODS OF EVALUATING THE PERFORMANCE OF VALVE POSITIONERS WITH PNEUMATIC OUTPUTS
95/541692 DC : 0 ISO/DIS 7240-7 - FIRE DETECTION AND ALARM SYSTEMS - SMOKE POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION
ISO 10599-2:1997 Car radios Coaxial aerial connectors Part 2: Characteristic values, performance requirements and tests
BS IEC 60951-1:2009 Nuclear power plants. Instrumentation important to safety. Radiation monitoring for accident and post-accident conditions General requirements
BS EN 61508-7:2010 Functional safety of electrical/electronic/ programmable electronic safety related systems Overview of techniques and measures
I.S. EN 143000:1994 THERMISTORS (GENERIC SPECIFICATION)
EN 15714-2:2009 Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements
IEC 60664-3 REDLINE : 3ED 2016 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 3: USE OF COATING, POTTING OR MOULDING FOR PROTECTION AGAINST POLLUTION
14/30282284 DC : 0 BS ISO 18185-3 - FREIGHT CONTAINERS - ELECTRONIC SEALS - PART 3: ENVIRONMENTAL CHARACTERISTICS
00/201245 DC : DRAFT FEB 2000 IEC 62029-1 - COAXIAL CABLES USED IN CABLED DISTRIBUTION NETWORKS - PART 1: GENERIC SPECIFICATION AND TEST METHODS
BS EN 61270-1:1998 Capacitors for microwave ovens General
08/30186163 DC : DRAFT JULY 2008 BS IEC 60092-306 - ELECTRICAL INSTALLATIONS IN SHIPS - PART 306: EQUIPMENT - LUMINAIRES AND LIGHTING ACCESSORIES
03/100500 DC : DRAFT JUNE 2003 IEC 60947-5-5 AMD 1. ED 1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION
CEI EN 61582 : 2007 RADIATION PROTECTION INSTRUMENTATION - IN VIVO COUNTERS - CLASSIFICATION, GENERAL REQUIREMENTS AND TEST PROCEDURES FOR PORTABLE, TRANSPORTABLE AND INSTALLED EQUIPMENT
I.S. EN 54-30:2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 30: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF CARBON MONOXIDE AND HEAT SENSORS
08/30176958 DC : DRAFT JAN 2008 BS EN 62333-3 - NOISE SUPPRESSION SHEET FOR DIGITAL DEVICES AND EQUIPMENT - PART 3: CHARACTERISTICS OF PARAMETERS OF NOISE SUPPRESSION SHEET
BS EN 54-16:2008 Fire detection and fire alarm systems Voice alarm control and indicating equipment
CEI EN 60169-21 : 1998 RADIO-FREQUENCY CONNECTORS - PART 21: TWO TYPES OF RADIO-FREQUENCY CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 9,5 MM (0,374 IN) WITH DIFFERENT VERSIONS OF SCREW COUPLING CHARACTERISTIC IMPEDANCE 50 OHMS (TYPES SC-A AND SC-B)
10/30237986 DC : 0 BS EN 140401-804 - DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25
05/30136802 DC : 0 EN 15267-3 - AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 3: PERFORMANCE SPECIFICATIONS AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR MONITORING EMISSIONS FROM STATIONARY SOURCES
15/30280758 DC : 0 BS EN 62745 - SAFETY OF MACHINERY - GENERAL REQUIREMENTS FOR CABLELESS CONTROL SYSTEMS OF MACHINERY
EN 62689-1:2016 Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 1: General principles and requirements
12/30252220 DC : DRAFT MAR 2012 BS EN 62604-1 - SURFACE ACOUSTIC WAVE (SAW) AND BULK ACOUSTIC WAVE (BAW) DUPLEXERS - PART 1: GENERIC SPECIFICATION
BS EN 12405-3:2015 Gas meters. Conversion devices Flow computer
PD IEC TR 60721-4-5:2002 Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Ground vehicle installations
11/30252977 DC : 0 BS EN 61747-10-2 - LIQUID CRYSTAL DISPLAY DEVICES - PART 10-2: ENVIRONMENTAL, ENDURANCE AND MECHANICAL TEST METHODS - ENVIRONMENTAL AND ENDURANCE
14/30280850 DC : 0 BS EN 60384-1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS EN 62421:2007 Electronics assembly technology. Electronic modules
S.R. CEN ISO/TS 14907-1:2015 ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 1: DESCRIPTION OF TEST PROCEDURES (ISO/TS 14907-1:2015)
08/30186808 DC : DRAFT JULY 2008 BS EN 140401 - BLANK DETAIL SPECIFICATION - FIXED LOW POWER NON-WIRE-WOUND SURFACE MOUNT (SMD) RESISTORS
ISO 7240-15:2014 Fire detection and alarm systems Part 15: Point-type fire detectors using smoke and heat sensors
DIN EN 15684 E : 2013 BUILDING HARDWARE - MECHATRONIC CYLINDERS - REQUIREMENTS AND TEST METHODS
BS EN 50617-2:2015 Railway Applications. Technical parameters of train detection systems for the interoperability of the trans-European railway system Axle counters
OIML R 99-1 & 2 : 2008 INSTRUMENTS FOR MEASURING VEHICLE EXHAUST EMISSIONS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS
EN 60077-2:2017 Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules
05/30135124 DC : DRAFT JUN 2005 IEC 61587-1 ED 2 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND 60297 - PART 1: CLIMATIC, MECHANICAL TESTS AND SAFETY ASPECTS FOR CABINETS, RACKS AND SUBRACKS
BS EN 61514:2002 Industrial-process control systems. Methods of evaluating the performance of valve positioners with pneumatic outputs
BS EN 140401-802 : 2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 1; 2
CEI 56-21 : 2000 EQUIPMENT RELIABILITY TESTING - PART 3: PREFERRED TEST CONDITIONS - SECTION 5: TEST CYCLE 5: GROUND MOBILE EQUIPMENT - LOW DEGREE OF SIMULATION
11/30247723 DC : 0 BS IEC 60571 - RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK
12/30259014 DC : 0 BS EN 60127-6 - MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE FUSE-LINKS
14/30311384 DC : 0 BS EN 60115-2:2014+A1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: LEADED FIXED LOW POWER FILM RESISTORS
CSA CEI/IEC 61000.4.15 : 2003 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4: TESTING AND MEASUREMENT TECHNIQUES - SECTION 15: FLICKERMETER - FUNCTIONAL AND DESIGN SPECIFICATIONS
OIML R 117-1 : 2007 DYNAMIC MEASURING SYSTEMS FOR LIQUIDS OTHER THAN WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
BS EN 60947-1 : 2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
UNI EN 15714-2 : 2009 INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
BS EN 60728-3:2011 Cable networks for television signals, sound signals and interactive services Active wideband equipment for cable networks
10/30234015 DC : 0 BS EN 62246-1-1 ED.1 - REED SWITCHES - PART 1-1: QUALITY ASSESSMENT SPECIFICATION
BS EN 60947-8:2003 Low-voltage switchgear and controlgear Control units for built-in thermal protection (PTC) for rotating electrical machines
NF EN 13637 : 2015 BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
BS EN 60862-1:2015 Surface acoustic wave (SAW) filters of assessed quality Generic specification
EN 60939-3:2015/AC:2016-04 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 3: PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE (IEC 60939-3:2015/COR1:2016)
IEC 60723-4:1987 Inductor and transformer cores for telecommunications. Part 4: Sectional specification: Magnetic oxide cores for transformers and chokes for power applications
BS EN 62689-1:2016 Current and voltage sensors or detectors, to be used for fault passage indication purposes General principles and requirements
15/30269562 DC : 0 BS EN 60749-43 - SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS - PART 43: GUIDELINES FOR LSI RELIABILITY QUALIFICATION PLANS
IEC 61851-22:2001 Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station
OIML R 21 : 2007 TAXIMETERS - METROLOGICAL AND TECHNICAL REQUIREMENTS, TEST PROCEDURES AND TEST REPORT FORMAT
DIN EN 61268 : 1996 ALTERNATING CURRENT STATIC VAR-HOUR METERS FOR REACTIVE ENERGY (CLASSES 2 AND 3)
BS EN 62878-1-1:2015 Device embedded substrate Generic specification. Test methods
11/30236274 DC : 0 BS ISO 7240-23 - FIRE DETECTION AND ALARM SYSTEMS - PART 23: VISUAL ALARM DEVICES
BS IEC 62679-4-2:2016 Electronic paper displays Environmental test methods
CEI EN 62314 : 2007 SOLID-STATE RELAYS
CEI EN 61051-1 : 2010 VARISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
12/30254694 DC : DRAFT MAR 2012 BS ISO 16525-8 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 8: ELECTROCHEMICAL-MIGRATION TEST METHODS
I.S. EN 60512-11-10:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-10: CLIMATIC TESTS - TEST 11J: COLD
ISO/IEC 10859:1997 Information technology — 8-bit backplane interface: STEbus and mechanical core specifications for microcomputers
BS EN 61007:1997 Transformers and inductors for use in electronic and telecommunication equipment. Measuring methods and test procedures
NF EN 54-22 : 2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 22: RESETTABLE LINE-TYPE HEAT DETECTORS
NF EN 61291 5-2 : 2003 OPTICAL AMPLIFIERS - PART 5-2: QUALIFICATION SPECIFICATIONS - RELIABILITY QUALIFICATION FOR OPTICAL FIBRE AMPLIFIERS
BS EN 133000:1997 Harmonized system of quality assessment for electronic components. Generic specification: passive filter units for electromagnetic interference suppression
BS EN 60505:2011 Evaluation and qualification of electrical insulation systems
BS EN 60115-8-1:2015 Fixed resistors for use in electronic equipment Blank detail specification: Fixed surface mount (SMD) low power film resistors for general electronic equipment, classification level G
BS EN 62974-1:2017 Monitoring and measuring systems used for data collection, gathering and analysis Device requirements
09/30201707 DC : 0 BS EN 60664-3+A1 ED.2 - INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 3: USE OF COATING, POTTING OR MOULDING FOR PROTECTION AGAINST POLLUTION
CEI 18-54 : 2003 ELECTRICAL INSTALLATIONS IN SHIPS - PART 504: SPECIAL FEATURES - CONTROL AND INSTRUMENTATION
BS EN 62572-3:2016 Fibre optic active components and devices. Reliability standards Laser modules used for telecommunication
BS IEC 60748-23-1:2002 Semiconductor devices. Integrated circuits. Hybrid integrated circuits and film structures. Manufacturing line certification Generic specification
ISO 16437:2012 Ships and marine technology - Lifesaving and fire protection — Atmospheric oil mist detectors for ships
DIN EN 54-22:2015-07 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 22: RESETTABLE LINE-TYPE HEAT DETECTORS
06/30149145 DC : DRAFT OCT 2006 IEC 60384-1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
ISO 7240-20:2010 Fire detection and alarm systems Part 20: Aspirating smoke detectors
CEI UNI EN 12966-1 : 2010 ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: - PRODUCT STANDARD
PREN 50130-5 : DRAFT 2010 ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS
CEI 56-20 : 2000 EQUIPMENT RELIABILITY TESTING - PART 3: PREFERRED TEST CONDITIONS - SECTION 4: TEST CYCLE 4: EQUIPMENT FOR PORTABLE AND NON-STATIONARY USE - LOW DEGREE OF SIMULATION
14/30272874 DC : 0 BS ISO 7240-29 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 29: VIDEO FIRE DETECTORS
BS EN 61337-2:2004 Filters using waveguide type dielectric resonators Guide for use
CEI EN 60077-2 : 2002 RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 2: ELECTROTECHNICAL COMPONENTS - GENERAL RULES
BS EN 60068-2-14:2009 Environmental testing Tests. Test N. Change of temperature
BS ISO 17089-1:2019 Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement
08/30193715 DC : 0 BS EN 62246-1 ED.2 - REED SWITCHES - PART 1: GENERIC SPECIFICATION
DIN EN 12405-3 E : 2016 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
BS ISO 7240-15:2014 Fire detection and alarm systems Point-type fire detectors using smoke and heat sensors
15/30329153 DC : 0 BS EN 62908-13-10 - TOUCH AND INTERACTIVE DISPLAYS - PART 13-10: RELIABILITY TEST METHODS OF TOUCH DISPLAYS - ENVIRONMENTAL DURABILITY TEST METHODS
BS 2011-2.1Ef:1992 Environmental testing. Tests Test Ef. Impact, pendulum hammer
BS EN 50130-5:2011 Alarm systems Environmental test methods
BS EN 130000:1994 Harmonized system of quality assessment for electronic components. Generic specification: fixed capacitors
BS EN 60122-1 : 2002 QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
BS EN 62149-3:2014 Fibre optic active components and devices. Performance standards Modulator-integrated laser diode transmitters for 2,5-Gbit/s to 40-Gbit/s fibre optic transmission systems
DIN EN ISO 4064-2:2016-09 (Draft) WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014)
05/30116657 DC : DRAFT MAY 2005 ISO 16750-4 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 4: CLIMATIC LOADS
11/30242198 DC : 0 BS ISO 19292 - SHIPS AND MARINE TECHNOLOGY - POINT-TYPE RESETTABLE FLAME DETECTORS FOR SHIPS
BS EN 180000:1996 Harmonized system of quality assessment for electronic components. Generic specification: Fibre optic attenuators
BS EN 60770-1:1999 Transmitters for use in industrial-process control systems Methods for performance evaluation
08/30193881 DC : 0 BS EN 60939-1 ED.3 - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
DD CLC/TS 50457-1:2008 Conductive charging for electric vehicles D.C. charging station
BS 2011-2.1Q:1977 Basic environmental testing procedure Part 2-17. Tests. Test Q: Sealing
UNE-EN 62974-1:2018 Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements
PD 6521:1988 Summaries of test methods for environmental testing of electrotechnical products
04/30031075 DC : DRAFT FEB 2004 ISO 4064-1 - MEASUREMENT OF WATER FLOW IN CLOSED FULLY CHARGED CONDUITS - METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: SPECIFICATIONS
BS EN 54-27:2015 Fire detection and fire alarms systems Duct smoke detectors
BS EN 60068-2-48:2000 Environmental testing. Test methods Guidance on the application of the tests of IEC 60068 to simulate the effects of storage
CEI EN 62052-11 : 2003 ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT
IEC 61557-12:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD)
NF EN 60947-5-8 : 2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-8: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - THREE-POSITION ENABLING SWITCHES
BS EN 50133-1:1997 Alarm systems. Access control systems for use in security applications System requirements
NF EN 50133-1 : 97 AMD 1 2003 ALARM SYSTEMS - ACCESS CONTROL SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1: SYSTEM REQUIREMENTS
NF EN 301442 : 2010
BS EN 61268:1996 Alternating current static var-hour meters for reactive energy (classes 2 and 3)
EN 300 019-2-1 : 2.2.1 ENVIRONMENTAL ENGINEERING (EE); ENVIRONMENTAL CONDITIONS AND ENVIRONMENTAL TESTS FOR TELECOMMUNICATIONS EQUIPMENT; PART 2-1: SPECIFICATION OF ENVIRONMENTAL TESTS; STORAGE
BS EN 50132-2-1:1998 Alarm systems. CCTV surveillance systems for use in security applications Black and white cameras
EN 300 019-2-2 : 2.3.1 ENVIRONMENTAL ENGINEERING (EE); ENVIRONMENTAL CONDITIONS AND ENVIRONMENTAL TESTS FOR TELECOMMUNICATIONS EQUIPMENT; PART 2-2: SPECIFICATION OF ENVIRONMENTAL TESTS; TRANSPORTATION
09/30150998 DC : 0
BS EN 61010-2-012:2016 Safety requirements for electrical equipment for measurement, control and laboratory use Particular requirements for climatic and environmental testing and other temperature conditioning equipment
NF EN 14846 : 2008 BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS
BS ISO 19453-4:2018 Road vehicles. Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles Climatic loads
15/30327720 DC : 0 BS EN 62586-1 - POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 1: POWER QUALITY INSTRUMENTS (PQI)
EN 54-7:2000/A2:2006 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION
NF EN 60393-2 : 2016 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - LEAD-SCREW ACTUATED AND ROTARY PRESET POTENTIOMETERS
DIN EN 60252 : 1994 CAPACITORS - MOTOR CAPACITORS
UNI EN 54-25 : 2008 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS
UNI EN 12405-1 : 2010 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
BS EN IEC 61643-352:2018 Components for low-voltage surge protection Selection and application principles for telecommunications and signalling network surge isolation transformers (SITs)
TS 137 145-1 : 14.2.0 UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); LTE; ACTIVE ANTENNA SYSTEM (AAS) BASE STATION (BS) CONFORMANCE TESTING; PART 1: CONDUCTED CONFORMANCE TESTING (3GPP TS 37.145-1 VERSION 14.2.0 RELEASE 14)
16/30296085 DC : 0 BS EN 60077-2 ED. 2.0 - RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 2: ELECTROTECHNICAL COMPONENTS - GENERAL RULES
BS EN 61747-1:2000 Liquid crystal and solid-state display devices Generic specification
I.S. EN 54-12:2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 12: SMOKE DETECTORS - LINE DETECTORS USING AN OPTICAL BEAM
UNE-EN 12405-1:2006 Gas meters - Conversion devices - Part 1: Volume conversion
CEI EN 61850-3 : 2014 COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 3: GENERAL REQUIREMENTS
BS EN 61298-3:2008 Process measurement and control devices. General methods and procedures for evaluating performance Tests for the effects of influence quantities
NF ISO 3930 : 2001 INSTRUMENTS FOR MEASURING VEHICLE EXHAUST EMISSIONS
UNI CEI EN 12966-1 : 2010 ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: PRODUCT STANDARD
CEI EN 62040-5-3 : 1ED 2017 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 5-3: DC OUTPUT UPS - PERFORMANCE AND TEST REQUIREMENTS
TS 136 143 : 13.0.0 LTE; EVOLVED UNIVERSAL TERRESTRIAL RADIO ACCESS (E-UTRA); FDD REPEATER CONFORMANCE TESTING (3GPP TS 36.143 VERSION 14.0.0 RELEASE 14)
CEI EN 50470-1 : 2007 ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C)
PREN 45501 : DRAFT 2011 METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
TS 125 141 : 13.2.0 UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); BASE STATION (BS) CONFORMANCE TESTING (FDD) (3GPP TS 25.141 VERSION 14.3.0 RELEASE 14)
I.S. EN 60127-6:2014 MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE FUSE-LINKS
ISO 18185-3:2015 Freight containers Electronic seals Part 3: Environmental characteristics
I.S. EN 60393-5:2016 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 5: SECTIONAL SPECIFICATION - SINGLE-TURN ROTARY LOW-POWER WIREWOUND AND NONWIREWOUND POTENTIOMETERS
NFC 70 238 : 2001 AMD 1 2006 ROAD TRAFFIC SIGNAL SYSTEMS
EN 63005-1:2017 Event video data recorder for road vehicle accidents - Part 1: Basic requirements
I.S. EN 61010-2-012:2016 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
I.S. EN IEC 62246-1-1:2018 REED SWITCHES - PART 1-1: GENERIC SPECIFICATION - BLANK DETAIL SPECIFICATION
EN IEC 61643-352:2018 Components for low-voltage surge protection - Part 352: Selection and application principles for telecommunications and signalling network surge isolation transformers (SITs)
EN 62488-2:2017 Power line communication systems for power utility applications - Part 2: Analogue power line carrier terminals or APLC
BS EN 50470-1 : 2006 ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C)
I.S. EN 50617-2:2015 RAILWAY APPLICATIONS - TECHNICAL PARAMETERS OF TRAIN DETECTION SYSTEMS FOR THE INTEROPERABILITY OF THE TRANS-EUROPEAN RAILWAY SYSTEM - PART 2: AXLE COUNTERS
BS EN 62040-3:2011 Uninterruptible power systems (UPS) Method of specifying the performance and test requirements
NF EN 62718 : 2017 RAILWAY APPLICATIONS - ROLLING STOCK - DC SUPPLIED ELECTRONIC BALLASTS FOR LIGHTING FLUORESCENT LAMPS
I.S. EN 165000-1:1998 FILM AND HYBRID INTEGRATED CIRCUITS - PART 1: GENERIC SPECIFICATION CAPABILITY APPROVAL PROCEDURE
ISO 7240-7:2011 Fire detection and alarm systems Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization
I.S. EN 62674-1:2012 HIGH FREQUENCY INDUCTIVE COMPONENTS - PART 1: FIXED SURFACE MOUNT INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT (IEC 62674-1:2012 (EQV))
ISO 7240-25:2010 Fire detection and fire alarm systems — Part 25: Components using radio transmission paths
I.S. EN 134000:1994 GENERIC SPECIFICATION: VARIABLE CAPACITORS (QUALIFICATION APPROVAL AND CAPABILITY APPROVAL)
I.S. EN ISO 4064-2:2017 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014)
I.S. EN 60539-1:2016 DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION
I.S. EN 61643-312:2013 COMPONENTS FOR LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 312: SELECTION AND APPLICATION PRINCIPLES FOR GAS DISCHARGE TUBES (IEC 61643-312:2013 (EQV) + CORRIGENDUM JUL. 2013 (EQV))
ISO 7240-4:2017 Fire detection and alarm systems — Part 4: Power supply equipment
I.S. EN 60947-5-8:2006 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-8: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - THREE-POSITION ENABLING SWITCHES
IEC 60770-3:2014 Transmitters for use in industrial-process control systems - Part 3: Methods for performance evaluation of intelligent transmitters
I.S. EN 60747-5-5:2011 SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS
I.S. EN 61291-5-2:2017 OPTICAL AMPLIFIERS - PART 5-2: QUALIFICATION SPECIFICATIONS - RELIABILITY QUALIFICATION FOR OPTICAL FIBRE AMPLIFIERS
CEI EN 60505 : 2012 EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS
IEC 61178-1:1993 Quartz crystal units - A specification in the IEC Quality Assessment System for Electronic Components (IECQ) - Part 1: Generic specification
CEI UNI EN 12414 : 2001 VEHICLE PARKING CONTROL EQUIPMENT - PAY AND DISPLAY TICKET MACHINE - TECHNICAL AND FUNCTIONAL REQUIREMENTS
I.S. CECC 33000:1994 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (GENERIC SPECIFICATION)
I.S. EN 54-3:2014 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS
BIS IS/ISO 7240-11 : 2011 FIRE DETECTION AND ALARM SYSTEMS - PART 11: MANUAL CALL POINTS
15/30296472 DC : 0 BS EN 54-7 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION
DIN EN 12966:2015-03 ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS
IEEE 802.3-2012 IEEE Standard for Ethernet
15/30298547 DC : 0 BS EN 14846 - BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS
IEC 60768:2009 Nuclear power plants - Instrumentation important to safety - Equipment for continuous in-line or on-line monitoring of radioactivity in process streams for normal and incident conditions
NF EN 50463-2 : 2013 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING
I.S. EN 54-24:2008 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS
EN IEC 62828-1:2018 Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General procedures for all types of transmitters
CEI EN 60115-9 : 2005 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 9: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTOR NETWORKS WITH INDIVIDUALLY MEASURABLE RESISTORS
CEI EN 61300-2-20 : 1997 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-20: TESTS - CLIMATIC SEQUENCE
CEI EN 60255-1 : 2011 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 1: COMMON REQUIREMENTS
CEI EN 62246-1-1 : 2014 REED SWITCHES - PART 1-1: GENERIC SPECIFICATION - QUALITY ASSESSMENT
OIML R 50-2 : 2014 CONTINUOUS TOTALIZING AUTOMATIC WEIGHING INSTRUMENTS (BELT WEIGHERS) - PART 2: TEST PROCEDURES
I.S. EN 62341-5:2009 ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 5: ENVIRONMENTAL TESTING METHODS
CEI EN 61557-12 : 2013 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 12: PERFORMANCE MEASURING AND MONITORING DEVICES (PMD)
EN 140401-802:2007/A3:2017 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 1; 2
OVE/ONORM EN 60947-5-8 : 2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-8: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - THREE-POSITION ENABLING SWITCHES
CEI EN 50556 : 2012 ROAD TRAFFIC SIGNAL SYSTEMS
EN 60384-1:2016 Fixed capacitors for use in electronic equipment - Part 1: Generic specification
OIML R 136-1 : 2004 INSTRUMENTS FOR MEASURING THE AREAS OF LEATHERS
CEI 214-3/1 : 1999 TAXI FLEET MANAGEMENT - GENERAL REFERENCE
CEI EN 61810-7 : 2006 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 7: TEST AND MEASUREMENT PROCEDURES
ISO 7240-3:2010 Fire detection and alarm systems Part 3: Audible alarm devices
IEC 60951-1:2009 Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post-accident conditions - Part 1: General requirements
ISO 19292:2014 Ships and marine technology Lifesaving and fire protection Point-type resettable flame detectors for ships
EN 12405-1:2005+A2:2010 Gas meters - Conversion devices - Part 1: Volume conversion
IEC 61337-1-2:1999 Filters using waveguide type dielectric resonators - Part 1-2: Test conditions
IEC 62586-1:2017 Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI)
IEC TR 60721-4-7:2001+AMD1:2003 CSV Classification of environmental conditions - Part 4-7: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Portable and non-stationary use
I.S. EN 54-16:2008 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 16: VOICE ALARM CONTROL AND INDICATING EQUIPMENT
IEC 61196-1-206:2017 Coaxial communication cables - Part 1-206: Environmental test methods - Climatic sequence
IEC 60215:2016 Safety requirements for radio transmitting equipment - General requirements and terminology
I.S. EN 61020-1:2009 ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
IEC 61747-10-2:2014 Liquid crystal display devices - Part 10-2: Environmental, endurance and mechanical test methods - Environmental and endurance
I.S. EN 61557-8:2015 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 8: INSULATION MONITORING DEVICES FOR IT SYSTEMS
IEC 62715-6-2:2017 Flexible display devices - Part 6-2: Environmental testing methods
I.S. EN 61131-2:2007 PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS
I.S. EN 140401-803:2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - CYLINDRICAL - STABILITY CLASSES 0,05; 0,1; 0,25; 0,5; 1; 2
I.S. EN 61169-1:2013 RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS
ISO 7240-28:2014 Fire detection and alarm systems Part 28: Fire protection control equipment
I.S. EN 62391-1:2016 FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
IEC TS 62668-2:2016 Process management for avionics - Counterfeit prevention - Part 2: Managing electronic components from non-franchised sources
IEC 60068-2-61:1991 Environmental testing - Part 2-61: Test methods - Test Z/ABDM:Climatic sequence
IEC 61131-2:2017 Industrial-process measurement and control - Programmable controllers - Part 2: Equipment requirements and tests
IEC TR 60721-4-3:2001+AMD1:2003 CSV Classification of environmental conditions - Part 4-3: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Stationary use at weatherprotected locations
I.S. EN 1300:2013 SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING
I.S. EN 54-25:2008 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS
IEC 61007:1994 Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures
I.S. EN 62878-1-1:2015 DEVICE EMBEDDED SUBSTRATE - PART 1-1: GENERIC SPECIFICATION - TEST METHODS
EN 61169-1:2013/AC:2016-02 RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS (IEC 61169-1:2013)
EN 60938-1:1999/A1:2007 FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
EN 60539-1:2016/AC:2017-09 DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION (IEC 60539-1:2016/COR1:2017)
EN 54-4:1997/A2:2006 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 4: POWER SUPPLY EQUIPMENT
EN 60115-1:2011/A11:2015 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
DIN EN 14803 E : 2006 IDENTIFICATION AND/OR DETERMINATION OF THE QUANTITY OF WASTE
DIN EN 45501:2016-03 METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
DIN EN 12101-10:2006-01 SMOKE AND HEAT CONTROL SYSTEMS - PART 10: POWER SUPPLIES
UNE-EN 50491-2:2011 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) -- Part 2: Environmental conditions
BS EN 54-12:2015 Fire detection and fire alarm systems Smoke detectors. Line detectors using an optical beam
BS EN 12101-10:2005 Smoke and heat control systems Power supplies
IEC 60738-1:2006+AMD1:2009 CSV Thermistors - Directly heated positive temperature coefficient -Part 1: Generic specification
IEC 62052-21:2004+AMD1:2016 CSV Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment
IEC 60938-1:1999+AMD1:2006 CSV Fixed inductors for electromagnetic interference suppression - Part 1: Generic specification
BS EN 54-23:2010 Fire detection and fire alarm systems Fire alarm devices. Visual alarm devices
12/30266531 DC : 0 BS EN TS 62257-1 - RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 1: GENERAL INTRODUCTION TO RURAL ELECTRIFICATION
IEC 61557-8:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems
IEC 61751:1998 Laser modules used for telecommunication - Reliability assessment
IEC 60689:2008 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values
BS EN 50090-2-2 : 1997 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS
IEC 62572-3:2016 Fibre optic active components and devices - Reliability standards - Part 3: Laser modules used for telecommunication
IEC 60728-14:2014 Cable networks for television signals, sound signals and interactive services - Part 14: Optical transmission systems using RFoG technology
16/30296081 DC : 0 BS EN 60077-1 ED. 2.0 - RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 1: GENERAL SERVICE CONDITIONS AND GENERAL RULES
IEC 60068-2-39:2015 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
IEC 62052-11:2003+AMD1:2016 CSV Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment
IEC 60747-5-5:2007+AMD1:2013 CSV Semiconductor devices - Discrete devices - Part 5-5: Optoelectronic devices - Photocouplers
IEC 60512-11-10:2002 Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold
BS EN 12352:2006 Traffic control equipment. Warning and safety light devices
IEC 60947-5-5:1997+AMD1:2005+AMD2:2016 CSV Low-voltage switchgear and controlgear - Part 5-5: Control circuitdevices and switching elements - Electrical emergency stop device with mechanical latching function
IEC 60947-8:2003+AMD1:2006+AMD2:2011 CSV Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines
BS EN 61851-1:2011 Electric vehicle conductive charging system General requirements
BS EN 54-10:2002 Fire detection and fire alarm systems Flame detectors. Point detectors
00/246907 DC : DRAFT DEC 2000 BS EN 61980-1 - ELECTRICAL - ELECTRIC VEHICLE INDUCTIVE CHARGING SYSTEMS - PART 1: GENERAL REQUIREMENTS
IEC 60384-1:2016 Fixed capacitors for use in electronic equipment - Part 1: Generic specification
EN 62752:2016 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
DIN EN 54-10 E : 2002 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 10: FLAME DETECTORS - POINT DETECTORS
IEC 60505:2011 Evaluation and qualification of electrical insulation systems
ISO 4064-2:2014 Water meters for cold potable water and hot water Part 2: Test methods
IEC 62040-5-3:2016 Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements
IEC 61270-1:1996 Capacitors for microwave ovens - Part 1: General
IEC 61557-9:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems
IEC 62314:2006 Solid-state relays
IEC 61020-1:2009 Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification
IEC 60939-1:2010 Passive filter units for electromagnetic interference suppression - Part 1: Generic specification
IEC 60255-1:1967 Electrical relays - Part 1: Instantaneous all-or-nothing relays
IEC 60728-6:2011 Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment
IEC 61747-1:1998+AMD1:2003 CSV Liquid crystal and solid-state display devices - Part 1: Generic specification
BS EN 54-5 : 2017 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 5: HEAT DETECTORS - POINT HEAT DETECTORS
UNE-EN 60255-1:2010 Measuring relays and protection equipment -- Part 1: Common requirements
ISO 22188:2004 Monitoring for inadvertent movement and illicit trafficking of radioactive material
IEC 60862-1:2015 Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification
IEC 61300-2-17:2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold
IEC 61268:1995 Alternating current static var-hour meters for reactive energy (classes 2 and 3)
ISO/TS 14907-1:2015 Electronic fee collection Test procedures for user and fixed equipment Part 1: Description of test procedures
IEC 60393-5:2015 Potentiometers for use in electronic equipment - Part 5: Sectional specification - Single-turn rotary low-power wirewound and non-wirewound potentiometers
IEC 60770-1:2010 Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation
IEC 61169-8:2007 Radio-frequency connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 Ω (type BNC)
BS EN 54-2 : 1998 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT
IEC 60068-3-1:2011 Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests
IEC 61850-3:2013 Communication networks and systems for power utility automation - Part 3: General requirements
IEC 61248-1:1996 Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification
DIN EN 54-12:2015-10 Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam
IEC 61019-1:2004 Surface acoustic wave (SAW) resonators - Part 1: Generic specification
IEC 62391-1 : 2.0 FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
IEC 62040-3:2011 Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
IEC 61275:2013 Radiation protection instrumentation - Measurement of discrete radionuclides in the environment - In situ photon spectrometry system using a germanium detector
IEC 61298-3:2008 Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities
IEC 60068-3-4:2001 Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
IEC 60945:2002 Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV Low-voltage switchgear and controlgear - Part 1: General rules
09/30207398 DC : 0 BS ISO 7240-3 - FIRE DETECTION AND ALARM SYSTEMS - PART 3: AUDIBLE ALARM DEVICES
BS EN 54-11:2001 Fire detection and fire alarm systems Manual call points
BS EN 14803:2006 Identification and/or determination of the quantity of waste
IEC 61338-1:2004 Waveguide type dielectric resonators - Part 1: Generic specification
BS EN 54-18:2005 Fire detection and fire alarm systems Input/output devices
BS EN 140402-801:2015 Detail specification: Fixed low power wirewound surface mount (SMD) resistors. Rectangular. Stability classes 0,5; 1; 2
IEC 61300-1:2016 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance
BS EN 54-20:2006 Fire detection and fire alarm systems Aspirating smoke detectors
IEC 60127-6:2014 Miniature fuses - Part 6: Fuse-holders for miniature fuse-links
BS EN 12405:2002 Gas meters. Gas-volume electronic conversion devices
DIN EN 54-20:2009-02 Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors (includes Amendment AC:2008)
PD IEC/TS 62668-2:2016 Process management for avionics. Counterfeit prevention Managing electronic components from non-franchised sources
IEC 62674-1:2012 High frequency inductive components - Part 1: Fixed surface mount inductors for use in electronic and telecommunication equipment
BS EN 60077-1:2017 Railway applications. Electric equipment for rolling stock General service conditions and general rules
15/30269927 DC : 0 BS EN 61851-1 ED 3.0 - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM PART 1: GENERAL REQUIREMENTS
DIN EN 54-18:2006-03 Fire detection and fire alarm systems - Part 18: Input/output devices
IEC 62333-3:2010 Noise suppression sheet for digital devices and equipment - Part 3: Characterization of parameters of noise suppression sheet
BS EN 50491-2 : 2010 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: ENVIRONMENTAL CONDITIONS
UNE-EN 61300-2-17:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-17: Tests - Cold
IEC 60393-2:2015 Potentiometers for use in electronic equipment - Part 2: Sectional specification - Lead-screw actuated and rotary preset potentiometers
IEC 61757-1:2012 Fibre optic sensors - Part 1: Generic specification
IEC 61988-4:2007 Plasma display panels - Part 4: Climatic and mechanical testing methods
UNE-EN 12368:2015 Traffic control equipment - Signal heads
IEC 61337-2:2004 Filters using waveguide type dielectric resonators - Part 2: Guidance for use
IEC 60747-5-2:1997+AMD1:2002 CSV Discrete semiconductor devices and integrated circuits - Part 5-2: Optoelectronic devices - Essential ratings and characteristics
EN 61337-2:2004 Filters using waveguide type dielectric resonators - Part 2: Guidance for use
EN 61751:1998 Laser modules used for telecommunication - Reliability assessment
EN 60862-1:2015 Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification
EN 54-26:2015 Fire detection and fire alarm systems - Part 26: Carbon monoxide detectors - Point detectors
EN 54-29 : 2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 29: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF SMOKE AND HEAT SENSORS
EN 54-21:2006 Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment
EN 13637:2015 Building hardware - Electrically controlled exit systems for use on escape routes - Requirements and test methods
EN 54-23:2010 Fire detection and fire alarm systems - Part 23: Fire alarm devices - Visual alarm devices
EN 14154-2:2005+A2:2011 Water meters - Part 2: Installation and conditions of use
EN ISO 4064-2:2017 Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014)
EN 54-28:2016 Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors
EN 54-3:2014 Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders
EN 180000 : 1995 GENERIC SPECIFICATION: FIBRE OPTIC ATTENUATORS
EN 14846:2008 Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods
EN 54-24:2008 Fire detection and fire alarm systems - Part 24: Components of voice alarm systems - Loudspeakers
EN 14637:2007 Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance
EN 54-17:2005/AC:2007 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 17: SHORT-CIRCUIT ISOLATORS
EN 54-16:2008 Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment
EN 54-2:1997/A1:2006 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT
EN 54-27:2015 Fire detection and fire alarms systems - Part 27: Duct smoke detectors
EN 54-20:2006/AC:2008 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS
EN 54-11:2001/A1:2005 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 11: MANUAL CALL POINTS
EN 54-10:2002/A1:2005 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 10: FLAME DETECTORS - POINT DETECTORS
EN 54-31:2014+A1:2016 Fire detection and fire alarm systems - Part 31: Multi-sensor fire detectors - Point detectors using a combination of smoke, carbon monoxide and optionally heat sensors
EN 54-18:2005/AC:2007 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 18: INPUT/OUTPUT DEVICES
EN 54-30:2015 Fire detection and fire alarm systems - Part 30: Multi-sensor fire detectors - Point detectors using a combination of carbon monoxide and heat sensors
EN 16280:2012 Breath alcohol test devices for general public - Requirements and test methods
03/103740 DC : DRAFT FEB 2003 IEC 61337-1 ED.1 - FILTERS USING WAVEGUIDE TYPE DIELECTRIC RESONATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
BS 2011-2.1Z/AFc:1984 Environmental testing. Tests Tests Z/AFc. Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
09/30152273 DC : 0 BS IEC/TS 60034-20-2 - ROTATING ELECTRICAL MACHINES - PART 20-2: PERFORMANCE CHARACTERISTICS AND TESTING SPECIFICATIONS FOR BRUSHLESS PERMANENT MAGNET MOTORS
UNE-EN 60068-3-1:2012 Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests
CEI EN 61988-4 : 2008 PLASMA DISPLAY PANELS - PART 4: CLIMATIC AND MECHANICAL TESTING METHODS
BS EN 60068-5-2:2000 Environmental testing. Guide to drafting of test methods Terms and definitions
NF EN 62052-21 : 2006 ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT
15/30328086 DC BS EN 61557-12. Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Part 12. Power metering and monitoring devices (PMD)
BS EN 50556:2011 Road traffic signal systems
DIN EN 54-23:2010-06 Fire detection and fire alarm systems - Part 23: Fire alarm devices - Visual alarm devices
BS CECC 16000-1:1992 Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays General
DIN EN 61038 : 1994 AMD 2 1999 TIME SWITCHES FOR TARIFF AND LOAD CONTROL
EN 61587-1:2017 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation
16/30353588 DC : 0 BS EN 61020-1 ED 3.0 - ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
07/30164953 DC : 0 IEC 60747-14-5 - SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 14-5: SEMICONDUCTOR SENSORS - PN-JUNCTION SEMICONDUCTOR TEMPERATURE SENSOR
ETR 344 : 20001 TERMINAL EQUIPMENT (TE) - THE TECHNICAL FEASIBILITY OF A HARMONIZED PLUG AND SOCKET STANDARD
DD IEC/PAS 60747-17:2011 Semiconductor devices. Discrete devices Magnetic and capacitive coupler for basic and reinforced isolation
NF EN 1300 : 2014 SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING
BS EN 60393-6:2016 Potentiometers for use in electronic equipment Sectional specification. Surface mount preset potentiometers
11/30243576 DC : DRAFT FEB 2011 BS EN 62643-1 - ELECTROSTATIC MICRO ELECTRO MECHANICAL SYSTEMS (MEMS) OSCILLATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
BS ISO 18251-1:2017 Non-destructive testing. Infrared thermography Characteristics of system and equipment
BS ISO 7240-28:2014 Fire detection and alarm systems Fire protection control equipment
I.S. EN 50491-2:2010 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: ENVIRONMENTAL CONDITIONS
DIN EN 54-30:2015-11 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 30: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF CARBON MONOXIDE AND HEAT SENSORS
BS EN 60393-5:2016 Potentiometers for use in electronic equipment Sectional specification. Single-turn rotary low-power wirewound and non-wirewound potentiometers
05/30138794 DC : DRAFT SEP 2005
CEI EN 62391-1 : 2016 FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
CEI EN 61270-1 : 1997 CAPACITORS FOR MICROWAVE OVENS - PART 1: GENERAL
CEI EN 62586-1 : 2016 POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 1: POWER QUALITY INSTRUMENTS (PQI)
BS EN 54-29:2015 Fire detection and fire alarm systems Multi-sensor fire detectors. Point detectors using a combination of smoke and heat sensors
DIN EN 14846:2015-07 (Draft) BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS
EN 61851-22:2002 Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station
BS IEC 60780:1998 Nuclear power plants. Electrical equipment of the safety system. Qualification
DIN EN 61037 : 1994 AMD 2 1999 ELECTRONIC RIPPLE CONTROL RECEIVERS FOR TARIFF AND LOAD CONTROL
CEI EN 140401 : 2009 BLANK DETAIL SPECIFICATION: FIXED LOW POWER FILM SURFACE MOUNT (SMD) RESISTORS
NF EN 50136-2-1 : 98 AMD 1 2002 ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 2-1: GENERAL REQUIREMENTS FOR EQUIPMENT USED IN SYSTEMS USING DEDICATED ALARM PATHS
CEI EN 60512-11-10 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-10: CLIMATIC TESTS - TEST 11J: COLD
CEI EN 62752 : 1ED 2017 IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD)
BS EN 61557-12:2008 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures Performance measuring and monitoring devices (PMD)
TS 136 141 : 13.2.0 LTE; EVOLVED UNIVERSAL TERRESTRIAL RADIO ACCESS (E-UTRA); BASE STATION (BS) CONFORMANCE TESTING (3GPP TS 36.141 VERSION 14.7.0 RELEASE 14)
CEI EN 60947-5-8 : 2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-8: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - THREE-POSITION ENABLING SWITCHES
BS EN 50132-4-1:2001 Alarm systems. CCTV surveillance systems for use in security applications Black and white monitors
BS EN 60393-1:2009 Potentiometers for use in electronic equipment Generic specification
09/30204275 DC : DRAFT MAY 2009 BS EN 61300-2-17 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-17: TESTS - COLD
CEI EN 138000 : 1996 GENERIC SPECIFICATION: FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED)
03/308375 DC : DRAFT JUNE 2003 IEC 61196-1 - COAXIAL COMMUNICATION CABLES - PART 1: GENERIC SPECIFICATION - GENERAL, DEFINITIONS AND REQUIREMENTS
CEI EN 60115-8 : 2013 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTORS
BS IEC 62715-6-2:2017 Flexible display devices Environmental testing methods
UNE-EN 50130-5:2011 Alarm systems - Part 5: Environmental test methods
08/30188489 DC : DRAFT AUG 2008 BS EN 54-27 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 27: DUCT SMOKE DETECTORS
BS EN 61020-1:2009 Electromechanical switches for use in electrical and electronic equipment Generic specification
13/30264596 DC : 0 BS EN 60747-14-7 ED 1.0 - SEMICONDUCTOR DEVICES - PART 14-7: SEMICONDUCTOR SENSORS - FLOW METER
CEI EN 61557-8 : 2016 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 8: INSULATION MONITORING DEVICES FOR IT SYSTEMS
BS EN 61850-3:2014 Communication networks and systems for power utility automation General requirements
15/30298059 DC : 0 BS EN 60947-5-5 ED 1.0/AMD 2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION
PREN 54-25 : DRAFT 2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS
10/30219087 DC : 0 BS EN 61587-1 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 - PART 1: ENVIRONMENTAL REQUIREMENTS AND TESTS, SAFETY ASPECTS FOR FOR CABINETS, RACKS, SUBRACKS AND CHASSIS
PD IEC/TR 62572-2:2008 Fibre optic active components and devices. Reliability standards Laser module degradation
IEEE C62.33-1982 IEEE Standard Test Specifications for Varistor Surge-Protective Devices
10/30184598 DC : 0 BS EN 61643-312 ED 1.0 - COMPONENTS FOR LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 312: PERFORMANCE SPECIFICATION FOR GAS DISCHARGE TUBES (GDT)
BS ISO 16525-8:2014 Adhesives. Test methods for isotropic electrically conductive adhesives Electrochemical-migration test methods
I.S. EN 50556:2011 ROAD TRAFFIC SIGNAL SYSTEMS
15/30330209 DC : 0 BS EN 62715-6-2 - PART 6-2: ENVIRONMENTAL TESTING METHODS
12/30268049 DC : 0 BS EN 62689-1 - CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS
BS EN 60115-9:2004 Fixed resistors for use in electronic equipment Sectional specification. Fixed surface mount resistor networks with individually measurable resistors
02/206181 DC : DRAFT MAY 2002 IEC 61019-1. ED.1 - SURFACE ACOUSTIC WAVE RESONATORS (SAW) OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
BS EN 60068-2-53:2010 Environmental testing Tests and guidance. Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests
DIN EN 54-16 E : 2008 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 16: VOICE ALARM CONTROL AND INDICATING EQUIPMENT
I.S. EN 62974-1:2017 MONITORING AND MEASURING SYSTEMS USED FOR DATA COLLECTION, GATHERING AND ANALYSIS - PART 1: DEVICE REQUIREMENTS
BS EN 61038:1993 Specification for time switches for tariff and load control
BS EN 62391-1:2016 Fixed electric double-layer capacitors for use in electric and electronic equipment Generic specification
DIN EN 54-27:2015-05 Fire detection and fire alarm systems - Part 27: Duct smoke detectors
BS EN 54-26:2015 Fire detection and fire alarm systems Carbon monoxide detectors. Point detectors
BS 7822-3:1995 Insulation coordination for equipment within low-voltage systems Use of coatings to achieve insulation coordination of printed board assemblies
DIN EN 15807:2011-05 Railway applications - Pneumatic half couplings
16/30336986 DC : 0 BS EN 62969-1 - SEMICONDUCTOR DEVICES - SEMICONDUCTOR INTERFACE FOR AUTOMOTIVE VEHICLES - PART 1: GENERAL REQUIREMENTS OF POWER INTERFACE FOR AUTOMOTIVE VEHICLE SENSORS
NF EN 60068 2-61 : 1994 ENVIRONMENTAL TESTING - PART 2: TEST METHODS - TEST Z/ABDM: CLIMATIC SEQUENCE
NF ISO 16750-4 : 2004 ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 4: CLIMATIC LOADS
DIN EN 14846 E : 2008 BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS
BS EN 61643-351:2017 Components for low-voltage surge protective devices Performance requirements and test methods for telecommunications and signalling network surge isolation transformers (SIT)
03/311340 DC : DRAFT JULY 2003 IEC 60728-3 ED.3.0 - CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE COAXIAL WIDEBAND DISTRIBUTION EQUIPMENT (TA5)
UNE-EN 60068-2-53:2011 Environmental testing -- Part 2-53: Tests and guidance: Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests
I.S. EN 60169-21:1999 RADIO-FREQUENCY CONNECTORS - PART 21: TWO TYPES OF RADIO-FREQUENCY CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 9,5 MM (0,374 IN) WITH DIFFERENT VERSIONS OF SCREW COUPLING - CHARACTERISTIC IMPEDANCE 50 OHMS (TYPES SC-A AND SC-B)
OIML R 146-1 : 2016 PROTEIN MEASURING INSTRUMENTS FOR CEREAL GRAIN AND OILSEEDS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
BS EN 54-24:2008 Fire detection and fire alarm systems Components of voice alarm systems. Loudspeakers
PD IEC/TS 63066:2017 Low-voltage docking connectors for removable energy storage units
UNE-EN 1300:2014 Secure storage units - Classification for high security locks according to their resistance to unauthorized opening
BS 7987(2001) : 2001 ROAD TRAFFIC SIGNAL SYSTEMS
BS PD ES 59008-4.3 : 2000 DATA REQUIREMENTS FOR SEMICONDUCTOR DIE - PART 4-3: SPECIFIC REQUIREMENTS AND RECOMMENDATIONS - THERMAL
BS EN 61300-2-17:2003 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests Cold
15/30298556 DC : DRAFT FEB 2015 BS EN 13637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
BS 2011-4.2:1984 Environmental testing. Miscellaneous Guidance on the application of the tests of BS 2011 to simulate the effects of storage
15/30302640 DC : 0 BS IEC 60092-504 ED 4.0 - ELECTRICAL INSTALLATIONS IN SHIPS - PART 504: AUTOMATION, CONTROL AND INSTRUMENTATION
PREN 50556 : DRAFT 2010 ROAD TRAFFIC SIGNAL SYSTEMS
ISO 16750-4:2010 Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 4: Climatic loads
BIS IS 1293 : 2005 AMD 6 2013 PLUGS AND SOCKET-OUTLETS OF RATED VOLTAGE UP TO AND INCLUDING 250 VOLTS AND RATED CURRENT UP TO 16 AMPERES - SPECIFICATION
CSA E61131.2 :2006 PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS
EN 62745:2017 Safety of machinery - Requirements for cableless control systems of machinery
IEC 62745:2017 Safety of machinery - Requirements for cableless control systems of machinery
04/30063259 DC : DRAFT JUL 2004
OIML R 76-1 : 2006 NON-AUTOMATIC WEIGHING INSTRUMENTS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS
CEI 79-9 : 1997 PROTECTION SYSTEMS FOR UNAUTHORIZED USE OF MOTOR VEHICLES PARTICULAR REQUIREMENTS FOR THE PROTECTION SYSTEMS AGAINST THE THEFT OF CARS
DIN EN 1434-4:2016-02 HEAT METERS - PART 4: PATTERN APPROVAL TESTS
TS 101 978 : 1.1.1 TERRESTRIAL TRUNKED RADIO (TETRA); TETRA ADVANCED PACKET SERVICE (TAPS) TEST PURPOSES
BS EN 60127-6:2014 Miniature fuses Fuse-holders for miniature fuse-links
NF EN 301908-6 : 2011 IMT CELLULAR NETWORKS - HARMONIZED EN COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE R&TTE DIRECTIVE - PART 6: CDMA TDD (UTRA TDD) USER EQUIPMENT (UE) (V5.2.1)
05/30132831 DC : DRAFT APR 2005 IEC 60947-5-8 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-8: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - THREE-POSITION ENABLING SWITCHES
CSA E61131.2 : 2006 : R2016 PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS
UNE-EN 15714-2:2010 Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements
04/30115471 DC : DRAFT JUL 2004 ISO 7240-21 - FIRE DETECTION AND ALARM SYSTEMS - PART 21: ROUTING EQUIPMENT
I.S. EN 60393-2:2016 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - LEAD-SCREW ACTUATED AND ROTARY PRESET POTENTIOMETERS
BS EN 60068-2-39:2016 Environmental testing Tests. Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
CSA C900.4 : 2013 HEAT METERS - PART 4: PATTERN APPROVAL TESTS
OIML R 139-2 : 2014 COMPRESSED GASEOUS FUEL MEASURING SYSTEMS FOR VEHICLES - PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS
15/30291072 DC : 0 BS EN 54-28 - FIRE DETECTION AND FIRE ALARM SYSTEM - PART 28: NON-RESETTABLE LINE TYPE HEAT DETECTORS
DIN EN 13637:2015-12 BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
DIN EN 15714-2:2010-02 Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements
CEI EN 50130-5 : 2012 ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS
CEI EN 60539-1 : 2009 DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION
BS IEC 60076-21:2011 Power transformers Standard requirements, terminology, and test code for step-voltage regulators
IEEE 45.6-2016 IEEE Recommended Practice for Electrical Installations on Shipboard--Electrical Testing
PREN 54-3 : DRAFT 2009 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS
BS EN 60068-2-5:2011 Environmental testing Tests. Test Sa. Simulated solar radiation at ground level and guidance for solar radiation testing
OIML R 144-1 : 2013 INSTRUMENTS FOR CONTINUOUS MEASUREMENT OF CO, NO[X] IN STATIONARY SOURCE EMISSIONS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
BS EN 170000:1999 Harmonized system of quality assessment for electronic components. Generic specification: waveguide type dielectric resonators
I.S. EN 60939-3:2015 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 3: PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE
I.S. EN IEC 60728-3:2018 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS (TA 5)
BIS IS/ISO 7240-7 : 2011 FIRE DETECTION AND ALARM SYSTEMS - PART 7: POINT-TYPE SMOKE DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION
I.S. EN 60947-1:2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
I.S. EN 61298-3:2008 PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 3: TESTS FOR THE EFFECTS OF INFLUENCE QUANTITIES
I.S. EN 15684:2012 BUILDING HARDWARE - MECHATRONIC CYLINDERS - REQUIREMENTS AND TEST METHODS
IEC 60723-5:1993 Inductor and transformer cores for telecommunications - Part 5: Sectional specification: Adjusters used with magnetic oxide cores for use in adjustable inductors and transformers
I.S. EN 60068-3-4:2002 ENVIRONMENTAL TESTING - PART 3-4: SUPPORTING DOCUMENTATION AND GUIDANCE - DAMP HEAT TESTS
BS EN 60664-3:2017 Insulation coordination for equipment within low-voltage systems Use of coating, potting or moulding for protection against pollution
I.S. EN IEC 61730-2:2018 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING
ISO 7240-23:2013 Fire detection and alarm systems — Part 23: Visual alarm devices
I.S. EN 54-31:2014 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 31: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF SMOKE, CARBON MONOXIDE AND OPTIONALLY HEAT SENSORS
BS EN 140101-806 : 2008 DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS - METAL FILM RESISTORS ON HIGH GRADE CERAMIC, CONFORMAL COATED OR MOLDED, AXIAL OR PREFORMED LEADS
I.S. EN 60122-1:2002 AMD 1 2018 QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
I.S. EN 61270-1:1999 CAPACITORS FOR MICROWAVE OVENS - PART 1: GENERAL
CEI 56-19 : 2000 EQUIPMENT RELIABILITY TESTING - PART 3: PREFERRED TEST CONDITIONS - SECTION 3: TEST CYCLE - EQUIPMENT FOR STATIONARY USE IN PARTIALLY WEATHER PROTECTED LOCATIONS - LOW DEGREE OF SIMULATION
DIN EN 54-5:2001-03 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 5: HEAT DETECTORS - POINT HEAT DETECTORS
I.S. EN 60728-14:2014 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 14: OPTICAL TRANSMISSION SYSTEMS USING RFOG TECHNOLOGY
I.S. EN 60862-1:2015 SURFACE ACOUSTIC WAVE (SAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
BS EN 62052-11 : 2003 ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TEST AND TEST CONDITIONS - PART 11: METERING EQUIPMENT (IEC 62052-11:2003)
I.S. EN 54-27:2015 FIRE DETECTION AND FIRE ALARMS SYSTEMS - PART 27: DUCT SMOKE DETECTORS
I.S. EN 63005-1:2017 EVENT VIDEO DATA RECORDER FOR ROAD VEHICLE ACCIDENTS - PART 1: BASIC REQUIREMENTS
NF EN 61557-12 : 2008 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 12: PERFORMANCE MEASURING AND MONITORING DEVICES (PMD)
DIN EN 54-24:2008-06 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS
I.S. EN 61169-8:2007 RADIO-FREQUENCY CONNECTORS - PART 8: SECTIONAL SPECIFICATION - RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 6,5 MM (0,256 IN) WITH BAYONET LOCK - CHARACTERISTICS IMPEDANCE 50 OHMS (TYPE BNC)
NF EN 50132-2-1 : 1997 ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 2-1: BLACK AND WHITE CAMERAS
NF EN 60835 1-1 : 1993 METHODS OF MEASUREMENT FOR EQUIPMENT USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS - PART 1: MEASUREMENTS COMMON TO TERRESTRIAL RADIO-RELAY SYSTEMS AND SATELLITE EARTH STATIONS - SECTION ONE: GENERAL
ONORM EN 54-7 : 2006 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION
NF EN 60947-1 : 2007 AMD 2 2015 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
NF EN 60255-1 : 2010 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 1: COMMON REQUIREMENTS
EN IEC 60728-3:2018 Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks (TA 5)
UNE-EN 61300-1:2017 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance
BIS IS 15934-5 : 2011 LIQUID CRYSTAL AND SOLID-STATE DISPLAY DEVICES - PART 5: ENVIRONMENTAL, ENDURANCE AND MECHANICAL TEST METHODS
CEI EN 60068-2-53 : 2011 ENVIRONMENTAL TESTING - PART 2-53: TESTS AND GUIDANCE: COMBINED CLIMATIC (TEMPERATURE/HUMIDITY) AND DYNAMIC (VIBRATION/SHOCK) TESTS
CEI EN 60939-1 : 2011 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
I.S. EN 60068-2-14:2009 ENVIRONMENTAL TESTING - PART 2-14: TESTS - TEST N: CHANGE OF TEMPERATURE
UNE-EN 62752:2017 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
NF EN 60747-5-5 : 2012 AMD 1 2015 SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS
TS 125 143 : 13.0.0 UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); UTRA REPEATER CONFORMANCE TESTING (3GPP TS 25.143 VERSION 13.0.0 RELEASE 13)
NF EN 50311 : 2003 RAILWAY APPLICATIONS - ROLLING STOCK - D.C. SUPPLIED ELECTRONIC BALLASTS FOR LIGHTING FLUORESCENT LAMPS
IEC 62884-1:2017 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement
I.S. EN 60255-1:2010 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 1: COMMON REQUIREMENTS
DIN EN 54-25:2015-10 (Draft) FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS
ISO 16525-8:2014 Adhesives Test methods for isotropic electrically conductive adhesives Part 8: Electrochemical-migration test methods
ISO/IEC/IEEE 8802-3:2017 Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Standard for Ethernet
I.S. EN 60068-2-39:2016 ENVIRONMENTAL TESTING - PART 2-39: TESTS - TESTS AND GUIDANCE: COMBINED TEMPERATURE OR TEMPERATURE AND HUMIDITY WITH LOW AIR PRESSURE TESTS
IEC 60077-1:2017 Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules
I.S. EN 60077-2:2017 RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 2: ELECTROTECHNICAL COMPONENTS - GENERAL RULES
I.S. EN 60728-5:2016 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 5: HEADEND EQUIPMENT
IEC 61156-1:2007+AMD1:2009 CSV Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification
IEC 60749-43:2017 Semiconductor devices - Mechanical and climatic test methods - Part 43: Guidelines for IC reliability qualification plans
I.S. EN 140401-801:2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25; 0,5; 1
IEC 60300-3-5:2001 Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles
I.S. EN 62314:2006 SOLID-STATE RELAYS
IEC 60664-3:2016 Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
IEC 62888-2:2018 Railway applications - Energy measurement on board trains - Part 2: Energy measurement
ISO 7240-21:2005 Fire detection and alarm systems — Part 21: Routing equipment
I.S. EN 60068-2-40:1999 ENVIRONMENTAL TESTING - PART 2: TESTS - TEST Z/AM: COMBINED COLD/LOW AIR PRESSURE TESTS
IEC 61869-1:2007 Instrument transformers - Part 1: General requirements
IEC 61019-1-2:1993 Surface acoustic wave (SAW) resonators - Part 1: General information, standard values and test conditions - Section 2: Test conditions
I.S. CECC 86000:1993 CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES - PART 1: REQUIREMENTS, TEST METHODS AND QUALIFICATION APPROVAL PROCEDURES (GENERIC SPECIFICATION)
IEC 61730-2 REDLINE : 2ED 2016 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING
I.S. EN 116000-3:1998 GENERIC SPECIFICATION: ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 3: TEST AND MEASUREMENT PROCEDURES
IEC 61204:1993+AMD1:2001 CSV Low-voltage power supply devices, d.c. output - Performance characteristics
IEC 60384-1 REDLINE : 5ED 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
EN 140401-803 : 2007 AMD 3 2017 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - CYLINDRICAL - STABILITY CLASSES 0,05; 0,1; 0,25; 0,5; 1; 2
EN 140101-806 : 2008 COR 2014 DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS - METAL FILM RESISTORS ON HIGH GRADE CERAMIC, CONFORMAL COATED OR MOLDED, AXIAL OR PREFORMED LEADS
EN 60747-5-5:2011/A1:2015 SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS (IEC 60747-5-5:2007/A1:2013)
EN 140401-801:2007/A1:2013 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25; 0,5; 1
DIN EN 12405-1:2011-04 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
BS EN 54-4:1998 Fire detection and fire alarm systems Power supply equipment
IEC 60115-9:2003 Fixed resistors for use in electronic equipment - Part 9: Sectional specification: Fixed surface mount resistor networks with individually measurable resistors
IEC 61810-7:2006 Electromechanical elementary relays - Part 7: Test and measurement procedures
IEC 61514:2000 Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs
DIN EN 54-21 E : 2006 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 21: ALARM TRANSMISSION AND FAULT WARNING ROUTING EQUIPMENT
IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60728-5:2015 Cable networks for television signals, sound signals and interactive services - Part 5: Headend equipment
IEC 62326-20:2016 Printed boards - Part 20: Printed circuit boards for high-brightness LEDs
BS EN 54-3:2014 Fire detection and fire alarm systems Fire alarm devices. Sounders
IEC 60068-2-53:2010 Environmental testing - Part 2-53: Tests and guidance - Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests
BS EN 61557-9:2015 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Equipment for insulation fault location in IT systems
EN 60077-1:2017 Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules
EN 62211:2017 Inductive components - Reliability management
EN 61038:1992/A2:1998 ELECTRICITY METERING - TARIFF AND LOAD CONTROL - PARTICULAR REQUIREMENTS FOR TIME SWITCHES
EN 61338-2:2004 Waveguide type dielectric resonators - Part 2: Guidelines for oscillator and filter applications
EN 12966:2014 Road vertical signs - Variable message traffic signs
EN 61036:1996/A1:2000 ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
DIN EN 14803:2006-05 IDENTIFICATION AND/OR DETERMINATION OF THE QUANTITY OF WASTE
NF EN 60068-3-7 : 2002 ENVIRONMENTAL TESTING - PART 3-7: SUPPORTING DOCUMENTATION AND GUIDANCE - MEASUREMENTS IN TEMPERATURE CHAMBERS FOR TESTS A AND TEST B (WITH LOAD)
EN 60770-3:2014 Transmitters for use in industrial-process control systems - Part 3: Methods for performance evaluation of intelligent transmitters
EN 61169-8:2007 Radio-frequency connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 ohms (type BNC)
EN 61757-1 : 2012 FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012)
EN 62572-3:2016 Fibre optic active components and devices - Reliability standards - Part 3: Laser modules used for telecommunication
EN 61300-1:2016 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance
EN 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
EN 61270-1:1996 Capacitors for microwave ovens - Part 1: General
EN 60947-5-3:2013 Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
EN 61514:2002 Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs
EN 119000 : 1996 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: GENERIC SPECIFICATION: DRY AND MERCURY WETTED REED CONTACT UNITS
EN 61557-12:2008 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD)
EN 60252 : 94 AC 94 A.C. MOTOR CAPACITORS
EN 60115-9:2004 Fixed resistors for use in electronic equipment - Part 9: Sectional specification - Fixed surface mount resistor networks with individually measurable resistors
EN 61508-7:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures
DIN EN 54-21:2006-08 Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment
EN 60068-2-39:2016 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
DIN EN 54-28:2016-07 Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors
EN 61248-1 : 1997 Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification
EN 61300-2-17:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold
EN 61557-9:2015/AC:2017-02 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 9: EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS (IEC 61557-9:2014/COR2:2017)
EN 60122-1:2002/A1:2018 QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION (IEC 60122-1:2002/A1:2017)
EN 50090-2-2:1996/A2:2007 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS
EN 61643-311:2013 Components for low-voltage surge protective devices - Part 311: Performance requirements and test circuits for gas discharge tubes (GDT)
EN 60393-6:2016 Potentiometers for use in electronic equipment - Part 6: Sectional specification - Surface mount preset potentiometers
EN 62052-21:2004/A1:2017/AC:2018-04 ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT (IEC 62052-21:2004/A1:2016/COR1:2018)
EN 60728-6:2011 Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment
EN 62052-11:2003/A1:2017/AC:2018-04 ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT (IEC 62052-11:2003/A1:2016/COR1:2018)
DIN EN 14637:2008-01 Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance
EN 60368-1:2000/A1:2004 PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
EN 60115-8:2012 Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors
EN 50512:2009 Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking Guidance Systems (A-VDGS)
EN 62246-1-1:2013 Reed switches - Part 1-1: Generic specification - Quality assessment
EN 301 908-13 : 7.1.1 IMT CELLULAR NETWORKS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF DIRECTIVE 2014/53/EU; PART 13: EVOLVED UNIVERSAL TERRESTRIAL RADIO ACCESS (E-UTRA) USER EQUIPMENT (UE)
EN 12405-3 : 2015 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
EN 60255-1:2010 Measuring relays and protection equipment - Part 1: Common requirements
EN 50132-4-1 : 2001 ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 4-1: BLACK AND WHITE MONITORS
EN 61810-7:2006 Electromechanical elementary relays - Part 7: Test and measurement procedures
EN 60728-5:2016 Cable networks for television signals, sound signals and interactive services - Part 5: Headend equipment
EN 62575-1:2016 Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality - Part 1: Generic specification
EN 165000-1:1996 Film and hybrid integrated circuits - Part 1: Generic specification - Capability approval procedure
IEC 60077-2:2017 RLV Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules
EN 62326-20:2016 Printed boards - Part 20: Printed circuit boards for high-brightness LEDs
IEC 60077-1:2017 RLV Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules
EN 60393-5 : 2016 Potentiometers for use in electronic equipment - Part 5: Sectional specification - Single-turn rotary low-power wirewound and nonwirewound potentiometers
EN 143000 : 1991 THERMISTORS (GENERIC SPECIFICATION)
EN 50491-2 : 2010 AMD 1 2015 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: ENVIRONMENTAL CONDITIONS
EN 116000-3 : 1996 GENERIC SPECIFICATION: ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 3: TEST AND MEASUREMENT PROCEDURES
EN 137000:1995 Generic Specification: Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors
DIN EN 54-16:2008-06 Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment
EN 50486:2008 Equipment for use in audio and video door-entry systems
EN 50463:2007 Railway applications - Energy measurement on board trains
EN 45501 : 2015 METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
EN 60068-2-53:2010 Environmental testing - Part 2-53: Tests and guidance: Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests
EN 61338-1:2005 Waveguide type dielectric resonators - Part 1: Generic specification
EN 50132-2-1 : 1997 ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - BLACK AND WHITE CAMERAS
EN 61204:1995/A1:2001 LOW-VOLTAGE POWER SUPPLY DEVICES, D.C. OUTPUT - PERFORMANCE CHARACTERISTICS (IEC 61204:1993, MODIFIED + A1:2001)
EN 60115-8-1:2015 Fixed resistors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed surface mount (SMD) low power film resistors for general electronic equipment, classification level G
DIN EN 12966-1:2010-03 ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: PRODUCT STANDARD
EN 62391-1:2016/AC:2016-12 FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION (IEC 62391-1:2015/COR1:2016)
EN 140100:2008 Sectional Specification: Fixed low power film resistors
EN 60068-3-1:2011 Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests
EN 60393-2:2016 Potentiometers for use in electronic equipment - Part 2: Sectional specification - Lead-screw actuated and rotary preset potentiometers
IEC 61730-2:2016 RLV Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing
EN 60127-6:2014 Miniature fuses - Part 6: Fuse-holders for miniature fuse-links
EN 62314 : 2006 SOLID-STATE RELAYS
CEN ISO/TS 14907-1:2015 Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/TS 14907-1:2015)
EN 54-25:2008/AC:2012 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS
EN 50617-2:2015/AC:2016 RAILWAY APPLICATIONS - TECHNICAL PARAMETERS OF TRAIN DETECTION SYSTEMS FOR THE INTEROPERABILITY OF THE TRANS-EUROPEAN RAILWAY SYSTEM - PART 2: AXLE COUNTERS
EN 60393-1:2009 Potentiometers for use in electronic equipment - Part 1: Generic specification
EN 61020-1:2009 Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification
EN 61988-4 : 2007 PLASMA DISPLAY PANELS - PART 4: CLIMATIC AND MECHANICAL TESTING METHODS
EN 61643-312 : 2013 COMPONENTS FOR LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 312: SELECTION AND APPLICATION PRINCIPLES FOR GAS DISCHARGE TUBES (IEC 61643-312:2013 + CORRIGENDUM JUL. 2013)
EN 140000 : 1993 GENERIC SPECIFICATION: FIXED RESISTORS
ETSI TS 138 141-1 V17.11.0:2023-10 5G; NR; Base Station (BS) conformance testing Part 1: Conducted conformance testing (3GPP TS 38.141-1 version 17.11.0 Release 17)
ETSI TS 138 176-2 V17.6.0:2023-10 5G; NR; Integrated Access and Backhaul (IAB) conformance testing; Part 2: Radiated conformance testing (3GPP TS 38.176-2 version 17.6.0 Release 17)
ETSI TS 137 145-2 V17.8.0:2023-07 Universal Mobile Telecommunications System (UMTS); LTE; 5G; Active Antenna System (AAS) Base Station (BS) conformance testing; Part 2: radiated conformance testing (3GPP TS 37.145-2 version 17.8.0 Release 17)
ETSI TS 137 145-1 V17.8.0:2023-07 Universal Mobile Telecommunications System (UMTS); LTE; 5G; Active Antenna System (AAS) Base Station (BS) conformance testing; Part 1: conducted conformance testing (3GPP TS 37.145-1 version 17.8.0 Release 17)
ETSI TS 138 115-1 V17.1.0:2023-05 5G; NR; Repeater conformance testing - Part 1: Conducted conformance testing (3GPP TS 38.115-1 version 17.1.0 Release 17)
ETSI TS 138 141-2 V17.11.0:2023-10 5G; NR; Base Station (BS) conformance testing Part 2: Radiated conformance testing (3GPP TS 38.141-2 version 17.11.0 Release 17)
BS 4671(1987) : AMD 7870 METHODS FOR EVALUATING THE PERFORMANCE OF ELECTRICAL AND PNEUMATIC ANALOGUE CHART RECORDERS FOR USE IN INDUSTRIAL PROCESS CONTROL SYSTEMS
BS CECC 30000:1992 Harmonized system of quality assessment for electronic components. Generic specification: fixed capacitors
BS CECC 30000:1984 Harmonized system of quality assessment for electronic components: generic specification: fixed capacitors
BS 3192(1996) : 1996 SAFETY REQUIREMENTS FOR RADIO TRANSMITTING EQUIPMENT

IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
IEC 60068-5-2:1990 Environmental testing - Part 5-2: Guide to drafting of test methods - Terms and definitions
IEC 60068-3-1:2011 Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests
IEC 60068-3-5:2001 Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers
IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60068-3-7:2001 Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load)

View more information
£75.05
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.