IEC 60212:2010
Current
Current
The latest, up-to-date edition.
Standard conditions for use prior to and during the testing of solid electrical insulating materials
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, English - French
Published date
15-12-2010
Publisher
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Temperature and humidity (or liquid immersion)
recommended for preconditioning, conditioning
and testing
5 Period of conditioning
6 Procedures for atmospheric preconditioning,
conditioning, and testing
7 Liquid immersion, conditioning and testing
8 Standard reference atmosphere
9 Code for specifying preconditioning, conditioning
and testing
10 Report
IEC 60212:2010 gives the accepted conditions of exposure time, temperature, atmospheric humidity and liquid immersion for use in testing solid electrical insulating materials. The range is sufficiently wide to enable suitable conditions to be selected so that either of the primary objects, set out below as a) and b), of conditioning can be achieved. These objectives aim to obtain greater reproducibility of test results by:
a) partly counteracting the variations of the properties of the material due to the past history of the test specimens (often known as "normalizing", here called preconditioning), and
b) ensuring uniformity of conditions during the testing.
This standard is not intended to be applied for determining the influence of exposure to certain temperatures and humidity or immersions in liquids, on the properties of a material. Procedures pertaining to the effect of an environment on a material are given in various parts of IEC 60068. The significant technical changes with respect to the previous edition are as follows:
- the scope and normative references have been updated and terms and definitions completely reviewed;
- technical details in Table 2 have been aligned to today's usage.
| Committee |
TC 112
|
| DevelopmentNote |
Stability Date: 2020. (09/2017)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 60212 : 2011 | Identical |
| NBN EN 60212 : 2011 | Identical |
| NEN EN IEC 60212 : 2011 | Identical |
| I.S. EN 60212:2011 | Identical |
| PN EN 60212 : 2011 | Identical |
| VDE 0308-1 : 2011 | Identical |
| DIN EN 60212 : 2011 | Identical |
| BS EN 60212:2011 | Identical |
| CEI EN 60212 : 2012 | Identical |
| EN 60212:2011 | Identical |
| NFC 26 200 : 1973 | Identical |
| CEI 15-12 : 1997 | Identical |
| NEN 10212 : 1990 | Identical |
| UNE-EN 60212:2011 | Identical |
| SAC GB/T 10580 : 2003 | Identical |
| UNE 21307:1976 | Identical |
| BS EN 61235:1995 | Live working. Insulating hollow tubes for electrical purposes |
| NF EN 61229 : 96 AMD 2 2003 | RIGID PROTECTIVE COVERS FOR LIVE WORKING ON A.C. INSTALLATIONS |
| 04/30108943 DC : 0 | |
| UNE-EN 60832-2:2011 | Live working - Insulating sticks and attachable devices -- Part 2: Attachable devices |
| I.S. EN 60674-2:2017 | SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| 14/30281093 DC : 0 | BS EN 60855-1 - LIVE WORKING - INSULATING FOAM-FILLED TUBES AND SOLID RODS - PART 1: TUBES AND RODS OF A CIRCULAR CROSS-SECTION |
| BS EN 60903:2003 | Live working. Gloves of insulating material |
| 00/243942 DC : 0 | PREN 50359-1-2 - ADVANCED TECHNICAL CERAMICS - PART 1-2: ELECTRICAL PROPERTIES - DETERMINATION OF THE SURFACE AND VOLUME RESISTIVITY IN THE TEMPERATURE RANGE 20 DEGREE C TO 800 DEGREE C |
| 13/30292436 DC : 0 | BS EN 62631-3-3 - GUIDELINES FOR THE DETERMINATION OF DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 3-3: DETERMINATION OF RESISTIVE PROPERTIES (DC METHODS) - INSULATION RESISTANCE |
| 02/204438 DC : 0 | IEC 60855. ED.2 - LIVE WORKING - INSULATING FOAM-FILLED TUBES AND SOLID RODS |
| BS EN 60855-1:2017 | Live working. Insulating foam-filled tubes and solid rods Tubes and rods of a circular cross-section |
| CEI EN 62192 : 2010 | LIVE WORKING - INSULATING ROPES |
| CEI EN 60672-2 : 2000 | CERAMIC AND GLASS INSULATING MATERIALS - PART 2: METHODS OF TEST |
| NF EN 60669-1 : 2000 AMD 2 2009 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| BS EN 62631-3-3 : 2016 COR 2016 | DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 3-3: DETERMINATION OF RESISTIVE PROPERTIES (DC METHODS) - INSULATION RESISTANCE (IEC 62631-3-3:2015) |
| 05/30128627 DC : DRAFT FEB 2005 | IEC 60216-6 ED.2 - ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 6: DETERMINATION OF THERMAL ENDURANCE INDICES (TI AND RTE) OF AN INSULATING MATERIAL USING THE FIXED TIME FRAME METHOD |
| BS EN 61112:2009 | Live working. Electrical insulating blankets |
| 00/243941 DC : 0 | PREN 50359-1-1 - ADVANCED TECHNICAL CERAMICS - PART 1-1: ELECTRICAL PROPERTIES - METHODS OF TEST FOR SHORT TERM ELECTRIC STRENGTH |
| 15/30294124 DC : 0 | BS EN 60674-2 ED 2.0 - SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| 02/204831 DC : DRAFT APR 2002 | IEC 60505. ED. 3.0 - EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS |
| BS EN 60900:2012 | Live working. Hand tools for use up to 1000 V a.c. and 1500 V d.c. |
| BS IEC 61111:1992 | Matting of insulating material for electrical purposes |
| BS EN 61478:2001 | Live working. Ladders of insulating material |
| NFC 18 422 : 2007 | BLANKETS OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES |
| BS EN 60216-1:2013 | Electrical insulating materials. Thermal endurance properties Ageing procedures and evaluation of test results |
| I.S. EN 60895:2003 | LIVE WORKING - CONDUCTIVE CLOTHING FOR USE AT NOMINAL VOLTAGE UP TO 800 KV A.C. AND +/- 600 KV D.C. |
| VDE 0471-2-3 : 1987 | FIRE HAZARD TESTING - TEST PROCEDURE - PART 2-3: BAD CONNECTION TEST WITH HEATERS |
| 98/201910 DC : DRAFT APRIL 1998 | PREN 50297 - PHOTOELECTRIC CONTROL UNITS FOR ROAD AND STREET LIGHTING |
| CEI EN 60544-2 : 2013 | ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS - PART 2: PROCEDURES FOR IRRADIATION AND TEST |
| I.S. EN IEC 60370:2018 | TEST PROCEDURE FOR THERMAL ENDURANCE OF INSULATING RESINS AND VARNISHES FOR IMPREGNATION PURPOSES - ELECTRIC BREAKDOWN METHODS |
| BS EN 62080 : 2009 | SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES |
| CEI EN 50321 : 2000 | ELECTRICALLY INSULATING FOOTWEAR FOR WORKING ON LOW VOLTAGE INSTALLATIONS |
| IEC 60893-2:2003 | Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test |
| I.S. EN 61478:2002 | LIVE WORKING - LADDERS OF INSULATING MATERIAL |
| I.S. CLC/TS 61112:2006 | BLANKETS OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES |
| I.S. EN 62631-3-1:2016 | DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 3-1: DETERMINATION OF RESISTIVE PROPERTIES (DC METHODS) - VOLUME RESISTANCE AND VOLUME RESISTIVITY - GENERAL METHOD |
| CEI EN 50508 : 2009 | MULTI-PURPOSE INSULATING STICKS FOR ELECTRICAL OPERATIONS ON HIGH VOLTAGE INSTALLATIONS |
| CEI EN 50365 : 2004 | ELECTRICALLY INSULATING HELMETS FOR USE ON LOW VOLTAGE INSTALLATIONS |
| NF EN 62329-2 : 2006 | HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST |
| EN 60455-3-8:2013 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories |
| IEC 60669-1 REDLINE : 4ED 2017 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 60855-1:2017 | Live working - Insulating foam-filled tubes and solid rods - Part 1: Tubes and rods of a circular cross-section |
| I.S. EN 62329-2:2006 | HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST |
| IEC 62011-2:2004 | Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Part 2: Methods of test |
| 16/30330036 DC : 0 | BS EN 62788-2 - MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 2: POLYMERIC MATERIALS USED FOR FRONTSHEETS AND BACKSHEETS |
| BS EN 60893-2:2004 | Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Methods of test |
| EN 60216-6:2006 | Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method |
| EN 61234-2:1998 | Electrical insulating materials - Methods of test for the hydrolytic stability - Part 2: Moulded thermosets |
| EN 60855:1996 | Insulating foam-filled tubes and solid rods for live working |
| EN 50365:2002 | Electrically insulating helmets for use on low voltage installations |
| EN 61112:2009 | Live working - Electrical insulating blankets |
| EN 61479:2001/A1:2002 | LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL |
| EN 60832:1996 | Insulating poles (insulating sticks) and universal tool attachments (fittings) for live working |
| EN 60243-1:2013 | ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013) |
| EN 62080:2009/A2:2015 | SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES (IEC 62080:2001/A2:2015) |
| EN 61111 : 2009 | LIVE WORKING - ELECTRICAL INSULATING MATTING |
| EN 62011-2:2004 | Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Part 2: Methods of test |
| EN 61478:2001/A1:2003 | LIVE WORKING - LADDERS OF INSULATING MATERIAL |
| EN 60684-2:2011 | Flexible insulating sleeving - Part 2: Methods of test |
| EN 61235:1995 | Live working - Insulating hollow tubes for electrical purposes |
| EN 60505:2011/AC:2017-03 | EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS (IEC 60505:2011/COR1:2017) |
| EN 60900:2012 | LIVE WORKING - HAND TOOLS FOR USE UP TO 1000 V A.C. AND 1500 V D.C. (IEC 60900:2012) |
| EN 61621:1997 | Dry, solid insulating materials - Resistance test to high-voltage, low-current arc discharges |
| EN 60216-1:2013 | Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results |
| EN 62631-3-3:2016 | Dielectric and resistive properties of solid insulating materials - Part 3-3: Determination of resistive properties (DC Methods) - Insulation resistance |
| EN 60893-2:2004 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test |
| EN 187000 : 92 AMD 1 95 | GENERIC SPECIFICATION: OPTICAL FIBRE CABLES |
| I.S. EN 62631-3-3:2016 | DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 3-3: DETERMINATION OF RESISTIVE PROPERTIES (DC METHODS) - INSULATION RESISTANCE |
| ESI 26-1 : ISSUE 2 | INSULATING FOAM-FILLED TUBE AND SOLID ROD FOR LIVE WORKING |
| BS EN 60695-2-1-2 : 1996 | FIRE HAZARD TESTING - TEST METHODS - SECTION 1/SHEET 2: GLOW-WIRE FLAMMABILITY TEST ON MATERIALS |
| NF EN 60832-2 : 2010 | LIVE WORKING - INSULATING STICKS AND ATTACHABLE DEVICES - PART 2: ATTACHABLE DEVICES |
| NF EN 60903 : 2004 | SPECIFICATION FOR GLOVES AND MITTS OF INSULATING MATERIAL FOR LIVE WORKING |
| NF EN 61057 : 2017 | LIVE WORKING - INSULATING AERIAL DEVICES FOR MOUNTING ON A CHASSIS |
| 14/30267388 DC : 0 | BS EN 62677-2 ED 1.0 - HEAT SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES - PART 2: METHODS OF TEST |
| BS EN 50365:2002 | Electrically insulating helmets for use on low voltage installations |
| 02/202973 DC : 0 | IEC 60832-2. ED.2 - LIVE WORKING - INSULATING STICKS AND ATTACHABLE UNIVERSAL DEVICES (FITTINGS) - PART 2: ATTACHABLE UNIVERSAL DEVICES (FITTINGS) |
| BS EN 60832-2:2010 | Live working. Insulating sticks and attachable devices Attachable devices |
| CEI EN 62094-1 : 2004 | INDICATOR LIGHT UNITS FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| BS EN 60455-3-8:2013 | Resin based reactive compounds used for electrical insulation Specifications for individual materials. Sheet 8: Resins for cable accessories |
| BS EN 62192:2009 | Live working. Insulating ropes |
| NF EN 60343 : 1993 | RECOMMENDED TEST METHODS FOR DETERMINING THE RELATIVE RESISTANCE OF INSULATING MATERIALS TO BREAKDOWN BY SURFACE DISCHARGES |
| 11/30258054 DC : 0 | BS EN 60243-1 - ELECTRICAL STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES |
| 99/201503 DC : 0 | IEC 61479 ED.1 - LIVE WORKING - CONDUCTOR COVERS (LINE HOSES) OR INSULATING MATERIAL FOR ELECTRICAL PURPOSES |
| 02/206916 DC : DRAFT MAY 2002 | IEC 62237. ED.1 - LIVE WORKING - INSULATING HOSES FOR USE WITH HYDRAULIC TOOLS AND EQUIPMENT |
| BS EN 62631-3-1:2016 | Dielectric and resistive properties of solid insulating materials Determination of resistive properties (DC methods). Volume resistance and volume resistivity. General method |
| NF EN 61478 : 2002 AMD 1 2004 | LIVE WORKING - LADDERS OF INSULATING MATERIAL |
| 08/30175871 DC : DRAFT JAN 2008 | BS EN 61112 - LIVE WORKING - ELECTRICAL INSULATING BLANKETS |
| 14/30313724 DC : 0 | BS EN 60900 ED 4.0 - LIVE WORKING - HAND TOOLS FOR USE UP TO 1000 V A.C. AND 1500 V D.C |
| EN IEC 62677-2:2018 | Heat shrinkable low and medium voltage moulded shapes - Part 2 Methods of test |
| 05/30136157 DC : DRAFT JUL 2005 | |
| 17/30365113 DC : 0 | BS EN 60455-3-8 ED.2.0 - RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES |
| VDE 0303-70 : 1994 | METHODS OF TEST FOR INSULATING MATERIALS FOR ELECTRICAL PURPOSES; BREAKDOWN BY SURFACE DISCHARGES, TEST METHODS |
| BS EN 61479:2001 | Live working. Flexible conductor covers (line hoses) of insulating material |
| BS EN 62631-3-2:2016 | Dielectric and resistive properties of solid insulating materials Determination of resistive properties (DC Methods). Surface resistance and surface resistivity |
| BS EN 50508:2009 | Multi-purpose insulating sticks for electrical operations on high voltage installations |
| I.S. EN 60832-2:2010 | LIVE WORKING - INSULATING STICKS AND ATTACHABLE DEVICES - PART 2: ATTACHABLE DEVICES |
| DD ENV 61111:2002 | Matting of insulating material for electrical purposes |
| BS 7741(1994) : AMD 8959 | SPECIFICATION FOR INSULATING HOLLOW TUBES FOR ELECTRICAL PURPOSES |
| BS EN 50237:2000 | Gloves and mitts with mechanical protection for electrical purposes |
| BS EN 50340:2010 | Hydraulic cable cutting devices. Devices to be used on electrical installations with nominal voltage up to AC 30 kV |
| EN IEC 60370:2018 | Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes - Electric breakdown methods |
| BS EN 60216-6:2006 | Electrical insulating materials. Thermal endurance properties Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method |
| BS EN 60730-1 95 : 95 AMD 12021 | SPECIFICATION FOR AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - GENERAL REQUIREMENTS |
| BS EN 60895:2003 | Live working. Conductive clothing for use at a nominal voltage up to 800 kV a.c. and ± 600 kV d.c. |
| BS EN 61229:1996 | Rigid protective covers for live working on a.c. installations |
| BS EN 61621:1997 | Dry, solid insulating materials. Resistance test to high-voltage, low-current arc discharges |
| CEI EN 61621 : 1998 | DRY, SOLID INSULATING MATERIALS - RESISTANCE TEST TO HIGH-VOLTAGE, LOW-CURRENT ARC DISCHARGES |
| BS IEC 60695-2.20 : 1995 | FIRE HAZARD TESTING - GLOWING/HOT WIRE BASED TEST METHODS - HOT-WIRE COIL IGNITABILITY TEST ON MATERIALS |
| NF EN 60684-2 : 2012 | FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST |
| CEI EN 61111 : 2010 | LIVE WORKING - ELECTRICAL INSULATING MATTING |
| EN 60343:1992 | Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges |
| IEC 61235:1993 | Live working - Insulating hollow tubes for electrical purposes |
| I.S. EN 60505:2011 | EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS |
| BS EN 60695-2-1-3 : 1996 | FIRE HAZARD TESTING - TEST METHODS - GLOW-WIRE IGNITABILITY TEST ON MATERIALS |
| I.S. EN 50321-1:2018 | LIVE WORKING - FOOTWEAR FOR ELECTRICAL PROTECTION - INSULATING FOOTWEAR AND OVERBOOTS |
| I.S. EN IEC 62677-2:2018 | HEAT SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES - PART 2: METHODS OF TEST |
| I.S. EN 60855:1999 | INSULATING FOAM-FILLED TUBES AND SOLID RODS FOR LIVE WORKING |
| I.S. EN 62080:2009 | SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES |
| BS EN 60669-1 : 2000 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| NF EN 61112 : 2009 | LIVE WORKING - ELECTRICAL INSULATING BLANKETS |
| I.S. EN 60544-4:2003 | ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 4: CLASSIFICATION SYSTEM FOR SERVICE IN RADIATION ENVIRONMENTS |
| CEI EN 60455-3-8 : 2014 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES |
| EN 50321-1:2018 | Live working - Footwear for electrical protection - Insulating footwear and overboots |
| UNE-EN 62080:2010 | Sound signalling devices for household and similar purposes |
| PREN 50321 : DRAFT 2013 | LIVE WORKING - FOOTWEAR FOR ELECTRICAL PROTECTION - INSULATING FOOTWEAR AND OVERBOOTS |
| NF EN 50365 : 2002 | ELECTRICALLY INSULATING HELMETS FOR USE ON LOW VOLTAGE INSTALLATIONS |
| I.S. EN 50340:2010 | HYDRAULIC CABLE CUTTING DEVICES - DEVICES TO BE USED ON ELECTRICAL INSTALLATIONS WITH NOMINAL VOLTAGE UP TO AC 30 KV |
| I.S. EN 61212-2:2006 | INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| I.S. EN 60893-2:2004 | INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| VDE 0471-2-1~2 : 1997 | FIRE HAZARD TESTING - TEST METHODS - GLOW-WIRE FLAMMABILITY TEST ON MATERIALS |
| VDE 0303-71 : 1999 | DRY, SOLID INSULATING MATERIALS - RESISTANCE TEST TO HIGH-VOLTAGE, LOW-CURRENT ARC DISCHARGES |
| DIN EN 61067-2 : 1998 | SPECIFICATION FOR GLASS AND GLASS POLYESTER FIBRE WOVEN TAPES - PART 2: METHODS OF TEST |
| VDE 0349-2 : 1998 | METHOD OF TEST FOR THE HYDROLYTIC STABILITY - MOULDED THERMOSETS |
| DIN EN 61068-2 : 1998 | SPECIFICATION FOR POLYESTER FIBRE WOVEN TAPES - PART 2: METHODS OF TEST |
| VDE 0471-2-1~3 : 1997 | FIRE HAZARD TESTING - PART 2: TEST METHODS - SECTION 1/SHEET 3: GLOW-WIRE IGNITABILITY TEST AN MATERIALS |
| DIN EN 61621 : 1999 | DRY, SOLID INSULATING MATERIALS - RESISTANCE TEST TO HIGH-VOLTAGE, LOW-CURRENT ARC DISCHARGES |
| VDE 0335-2 : 2000 | CERAMIC AND GLASS INSULATING MATERIALS - METHODS OF TEST |
| DIN EN 61234-2 : 1998 | ELECTRICAL INSULATING MATERIALS - METHOD OF TEST FOR THE HYDROLYTIC STABILITY - PART 2: MOULDED THERMOSETS |
| VDE 0337-2 : 1998 | SPECIFICATION FOR POLYESTER FIBRE WOVEN TAPES - METHODS OF TEST |
| BS 5691-1:1995 | Guide for the determination of thermal endurance properties of electrical insulating materials General guidelines for ageing procedures and evaluation of test results |
| VDE 0303-30 : 1993 | METHODS OF TEST FOR INSULATING MATERIALS FOR ELECTRICAL PURPOSES; VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS |
| VDE 0338-2 : 1998 | SPECIFICATION FOR GLASS AND GLASS POLYESTER FIBRE WOVEN TAPES - METHODS OF TEST |
| VDE 0303-31 : 1993 | METHODS OF TEST FOR INSULATING MATERIALS FOR ELECTRICAL PURPOSES; INSULATION RESISTANCE OF SOLID MATERIALS |
| DIN EN 60672-2 : 2000 | CERAMIC AND GLASS INSULATING MATERIALS - PART 2: METHODS OF TEST |
| UNE-EN 62192:2011 | Live working - Insulating ropes |
| CEI EN 62329-2 : 2007 | HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST |
| CEI EN 60903 : 2005 | LIVE WORKING - GLOVES OF INSULATING MATERIAL IMPIANTI |
| CEI EN 60895 : 2005 | LIVE WORKING - CONDUCTIVE CLOTHING FOR USE AT NOMINAL VOLTAGE UP TO 800 KV AC AND (+/-) 600 KV DC |
| 08/30175867 DC : DRAFT JAN 2008 | BS EN 61111 - LIVE WORKING - ELECTRICAL INSULATING MATTING |
| 09/30198417 DC : DRAFT JAN 2009 | BS EN 60505 - EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS |
| BS 7810-2:1995 | Specification for glass and glass polyester fibre woven tapes Methods of test |
| BS EN 61111 : 2010 | LIVE WORKING - ELECTRICAL INSULATING MATTING |
| CEI EN 50340 : 2011 | HYDRAULIC CABLE CUTTING DEVICES - DEVICES TO BE USED ON ELECTRICAL INSTALLATIONS WITH NOMINAL VOLTAGE UP TO AC 30 KV |
| NF EN 62192 : 2009 | LIVE WORKING - INSULATING ROPES |
| CEI EN 61112 : 2010 | LIVE WORKING - ELECTRICAL INSULATING BLANKETS |
| ENA TS 26-1 : ISSUE 2 1977 | INSULATING FOAM-FILLED TUBE AND SOLID ROD FOR LIVE WORKING |
| BS EN 60216-8:2013 | Electrical insulating materials. Thermal endurance properties Instructions for calculating thermal endurance characteristics using simplified procedures |
| 14/30318963 DC : DRAFT DEC 2014 | BS EN 61057 - LIVE WORKING - INSULATING AERIAL DEVICES FOR MOUNTING ON A CHASSIS |
| NF EN 60895 : 2004 | LIVE WORKING - CONDUCTIVE CLOTHING FOR USE AT NOMINAL VOLTAGE UP TO 800 KV A.C. AND +/- 600 KV D.C. |
| 08/30176905 DC : DRAFT JAN 2008 | BS EN 60684-2 - FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST |
| BS EN 60984:1993 | Specification for sleeves of insulating material for live working |
| CEI EN 60832-2 : 2011 | LIVE WORKING - INSULATING STICKS AND ATTACHABLE DEVICES - PART 2: ATTACHABLE DEVICES |
| BS EN 60832:1997 | Specification for insulating poles (insulating sticks) and universal tool attachments (fittings) for live working |
| 14/30302407 DC : 0 | BS EN 60895 - LIVE WORKING - CONDUCTIVE CLOTHING |
| BS EN 61234-2:1998 | Method of test for hydrolytic stability of electrical insulating materials Moulded thermosets |
| 15/30330425 DC : 0 | BS EN 60370 ED 2.0 - TEST PROCEDURE FOR THERMAL ENDURANCE OF INSULATING RESINS AND VARNISHES FOR IMPREGNATION PURPOSES - ELECTRIC BREAKDOWN METHODS |
| CLC/TS 61111:2006 | Matting of insulating material for electrical purposes |
| CEI EN 62011-2 : 2005 | INSULATING MATERIALS - INDUSTRIAL, RIGID, MOULDED, LAMINATED TUBES AND RODS OF RECTANGULAR AND HEXAGONAL CROSS-SECTION, BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| BS EN 60684-2:2011 | Flexible insulating sleeving Methods of test |
| BS EN 62329-2:2006 | Heat shrinkable moulded shapes Methods of test |
| UNE-EN 50340:2011 | Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV |
| IEC 60669-1:2017 RLV | Switches for household and similar fixed-electrical installations - Part 1: General requirements |
| NF EN 60216-6 : 2006 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 6: DETERMINATION OF THERMAL ENDURANCE INDICES (TI AND RTE) OF AN INSULATING MATERIAL USING THE FIXED TIME FRAME METHOD |
| I.S. EN 60243-1:2013 | ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013 (EQV)) |
| CEI EN 60900 : 2015 | LIVE WORKING - HAND TOOLS FOR USE UP TO 1000 V A.C. AND 1500 V D.C. |
| I.S. EN 60544-2:2012 | ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS - PART 2: PROCEDURES FOR IRRADIATION AND TEST (IEC 60544-2:2012 (EQV)) |
| I.S. CLC/TS 61111:2006 | MATTING OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES |
| I.S. EN 50508:2009 | MULTI-PURPOSE INSULATING STICKS FOR ELECTRICAL OPERATIONS ON HIGH VOLTAGE INSTALLATIONS |
| EN 61057:2017 | Live working - Insulating aerial devices for mounting on a chassis |
| I.S. EN 61057:2017 | LIVE WORKING - INSULATING AERIAL DEVICES FOR MOUNTING ON A CHASSIS |
| DIN VDE 0471-2-3 : 1987 | FIRE HAZARD TESTING - TEST PROCEDURE 2-3 - BAD-CONNECTION TEST WITH HEATERS |
| I.S. EN IEC 62631-2-1:2018 | DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 2-1: RELATIVE PERMITTIVITY AND DISSIPATION FACTOR - TECHNICAL FREQUENCIES (0,1 HZ TO 10 MHZ) - AC METHODS |
| I.S. EN 61479:2001 | LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL |
| IEC 60669-1:2017 | Switches for household and similar fixed-electrical installations - Part 1: General requirements |
| IEC 60984:2014 | Live working - Electrical insulating sleeves |
| IEC 62631-3-2:2015 | Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC methods) - Surface resistance and surface resistivity |
| IEC 60903:2014 | Live working - Electrical insulating gloves |
| IEC 60343:1991 | Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges |
| IEC 62631-2-1:2018 | Dielectric and resistive properties of solid insulating materials - Part 2-1: Relative permittivity and dissipation factor - Technical Frequencies (0,1 Hz - 10 MHz) - AC Methods |
| IEC 62329-2:2006 | Heat-shrinkable moulded shapes - Part 2: Methods of test |
| IEC 62631-3-3:2015 | Dielectric and resistive properties of solid insulating materials - Part 3-3: Determination of resistive properties (DC methods) - Insulation resistance |
| IEC 60216-8:2013 | Electrical insulating materials - Thermal endurance properties - Part 8: Instructions for calculating thermal endurance characteristics using simplified procedures |
| PD IEC/TS 62788-2:2017 | Measurement procedures for materials used in photovoltaic modules Polymeric materials. Frontsheets and backsheets |
| IEC 60832-2:2010 | Live working - Insulating sticks and attachable devices - Part 2: Attachables devices |
| IEC 61067-2:1992 | Specification for glass and glass polyester fibre woven tapes - Part 2: Methods of test |
| EN 60895:2003 | Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and ± 600 kV d.c. |
| EN 60674-2:2017/AC:2018-01 | SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST (IEC 60674-2:2016/COR1:2017) |
| BS 3676-1(2000) : 2000 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 62192:2009 | LIVE WORKING - INSULATING ROPES |
| BS 7692(1993) : 1993 AMD 9358 | INSULATING POLES (INSULATING STICKS) AND UNIVERSAL TOOL ATTACHMENTS (FITTINGS) FOR LIVE WORKING |
| BIS IS 13771 : 2013 | LIVE WORKING - CONDUCTIVE CLOTHING FOR USE AT NOMINAL VOLTAGE UP TO 800 KV A.C. AND +/-600 KV D.C. |
| 08/30180052 DC : DRAFT MAR 2008 | BS EN 50340 AMD1 - HYDRAULIC CABLE CUTTING DEVICES - DEVICES TO BE USED ON ELECTRICAL INSTALLATIONS WITH NOMINAL VOLTAGE UP TO AC 30 KV |
| I.S. EN 61229:1999 | RIGID PROTECTIVE COVERS FOR LIVE WORKING ON A.C. INSTALLATIONS |
| NF EN 60855-1 : 2017 | LIVE WORKING - INSULATING FOAM-FILLED TUBES AND SOLID RODS - PART 1: TUBES AND RODS OF A CIRCULAR CROSS-SECTION |
| DD ENV 61112:2002 | Blankets of insulating material for electrical purposes |
| BS EN 60544-4:2003 | Electrical insulating materials. Determination of the effects of ionizing radiation Classification system for service in radiation environments |
| 14/30281166 DC : 0 | BS EN 50321 - LIVE WORKING - FOOTWEAR FOR ELECTRICAL PROTECTION - INSULATING FOOTWEAR AND OVERBOOTS |
| I.S. EN 60684-2:2011 | FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST (IEC 60684-2:2011) |
| 11/30246689 DC : 0 | BS EN 60216-8 - ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 8: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS USING SIMPLIFIED PROCEDURES |
| BS IEC 61942:1997 | Live working. Gloves and mitts with mechanical protection |
| I.S. EN 60216-1:2013 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 1: AGEING PROCEDURES AND EVALUATION OF TEST RESULTS (IEC 60216-1:2013 (EQV)) |
| IEEE 1067-2012 | IEEE Guide for In-Service Use, Care, Maintenance, and Testing of Conductive Clothing for Use on Voltages up to 765 kV AC and +/-750 kV DC |
| 12/30263544 DC : 0 | BS EN 60216-1 - ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 1: AGEING PROCEDURES AND EVALUATION OF TEST RESULTS |
| BS EN 60505:2011 | Evaluation and qualification of electrical insulation systems |
| CEI EN 60216-6 : 2007 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 6: DETERMINATION OF THERMAL ENDURANCE INDICES (TI AND RTE) OF AN INSULATING MATERIAL USING THE FIXED TIME FRAME METHOD |
| CEI EN 60855 : 1997 | INSULATING FOAM-FILLED TUBES AND SOLID RODS FOR LIVE WORKING |
| BS EN 60243-1:2013 | Electric strength of insulating materials. Test methods Tests at power frequencies |
| BS EN 61057:1994 | Aerial devices with insulating boom used for live working exceeding 1 kV a.c. |
| NF EN 62080 : 2010 AMD 2 2015 | SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES |
| BS EN 187000:1994 | Generic specification for optical fibre cables |
| BS EN 62094-1:2003 | Indicator light units for household and similar fixed-electrical installations General requirements |
| BS 7290-2(1990) : 1990 AMD 10106 | PLASTICS FILMS FOR ELECTRICAL PURPOSES - METHODS OF TEST |
| BS 5691-1:1979 | Guide for the determination of thermal endurance properties of electrical insulating materials General procedures for the determination of thermal endurance properties, temperature indices and thermal endurance profiles |
| NF EN 60984 : 93 AMD 1 2003 | SLEEVES OF INSULATING MATERIAL FOR LIVE WORKING |
| 09/30200661 DC : 0 | BS EN 60669-1 ED 4.0 - SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| BS EN IEC 60370:2018 | Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes. Electric breakdown methods |
| EN IEC 62631-2-1:2018 | Dielectric and resistive properties of solid insulating materials - Part 2-1: Relative permittivity and dissipation factor - Technical frequencies (0,1 Hz to 10 MHz) - AC Methods |
| BS EN 50321-1:2018 | Live working. Footwear for electrical protection Insulating footwear and overboots |
| CSA E730.1-2E : 95(R2000) | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 1: GENERAL REQUIREMENTS |
| BIS IS 8504-1 : 2012 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 1: AGEING PROCEDURES AND EVALUATION OF TEST RESULTS |
| I.S. EN 61111:2009 | LIVE WORKING - ELECTRICAL INSULATING MATTING |
| I.S. EN 62631-3-2:2016 | DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 3-2: DETERMINATION OF RESISTIVE PROPERTIES (DC METHODS) - SURFACE RESISTANCE AND SURFACE RESISTIVITY |
| I.S. EN 60216-6:2004 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 6: DETERMINATION OF THERMAL ENDURANCE INDICES (TI AND RTE) OF AN INSULATING MATERIAL USING THE FIXED TIME FRAME METHOD |
| BS EN 60674-2:2017+A1:2019 | Specification for plastic films for electrical purposes Methods of test |
| CEI EN 60505 : 2012 | EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS |
| CEI EN 60855-1 : 1ED 2017 | LIVE WORKING - INSULATING FOAM-FILLED TUBES AND SOLID RODS - PART 1: TUBES AND RODS OF A CIRCULAR CROSS-SECTION |
| NF EN 60674-2 : 98 AMD 1 2002 | SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| CEI EN 60243-1 : 2014 | ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES |
| CLC/TS 61112:2006 | Blankets of insulating material for electrical purposes |
| CEI EN 61067-2 : 1998 | SPECIFICATION FOR GLASS AND GLASS POLYESTER FIBRE WOVEN TAPES - PART 2: METHODS OF TEST |
| CEI EN 60216-1 : 2014 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 1: AGEING PROCEDURES AND EVALUATION OF TEST RESULTS |
| UNE-EN 50508:2011 | Multi-purpose insulating sticks for electrical operations on high voltage installations |
| IEC 60674-2:2016 | Specification for plastic films for electrical purposes - Part 2: Methods of test |
| I.S. EN 61621:1999 | DRY, SOLID INSULATING MATERIALS - RESISTANCE TO HIGH-VOLTAGE, LOW-CURRENT ARC DISCHARGES |
| I.S. EN 61112:2009 | LIVE WORKING - ELECTRICAL INSULATING BLANKETS |
| IEC 61234-2:1997 | Electrical insulating materials - Methods of test for the hydrolytic stability - Part 2: Moulded thermosets |
| I.S. EN 60903:2003 | LIVE WORKING - GLOVES OF INSULATING MATERIAL |
| I.S. EN 62237:2005 | LIVE WORKING - INSULATING HOSES WITH FITTINGS FOR USE WITH HYDRAULIC TOOLS AND EQUIPMENT |
| IEC 60900:2012 | Live working - Hand tools for use up to 1 000 V a.c. and 1 500 V d.c. |
| IEC 61057:2017 | Live working - Insulating aerial devices for mounting on a chassis |
| I.S. EN 60343:1993 | RECOMMENDED TEST METHODS FOR DETERMINING THE RELATIVE RESISTANCE OF INSULATING MATERIALS TO BREAKDOWN BY SURFACE DISCHARGES |
| I.S. EN 61067-2:1999 | SPECIFICATION FOR GLASS AND GLASS POLYESTER FIBRE WOVEN TAPES - PART 2: METHODS OF TEST |
| IEC 62677-2:2017 | Heat shrinkable low and medium voltage moulded shapes - Part 2: Methods of test |
| IEC 61942:1997 | Live working - Gloves and mitts with mechanical protection |
| IEC 61479:2001+AMD1:2002 CSV | Live working - Flexible conductor covers (line hoses) of insulating material |
| IEC 61112:2009 | Live working - Electrical insulating blankets |
| IEC 60832-1:2010 | Live working - Insulating sticks and attachable devices - Part 1: Insulating sticks |
| IEC 60855:1985 | Insulating foam-filled tubes and solid rods for live working |
| EN 60669-1:2018 | Switches for household and similar fixed electrical installations - Part 1: General requirements |
| IEC 60895:2002 | Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and +/- 600 kV d.c. |
| 14/30272356 DC : 0 | BS EN 60669-1 - SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| IEC 60505:2011 | Evaluation and qualification of electrical insulation systems |
| IEC 62080:2001+AMD1:2008+AMD2:2015 CSV | Sound signalling devices for household and similar purposes |
| IEC 60544-2:2012 | Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test |
| IEC 62237:2003 | Live working - Insulating hoses with fittings for use with hydraulic tools and equipment |
| IEC 61212-2:2006 | Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test |
| IEC 60216-6:2006 | Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method |
| IEC 60684-2:2011 | Flexible insulating sleeving - Part 2: Methods of test |
| IEC TS 62788-2:2017 | Measurement procedures for materials used in photovoltaic modules - Part 2: Polymeric materials - Frontsheets and backsheets |
| IEC 60243-1:2013 | Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
| IEC 61478:2001+AMD1:2003 CSV | Live working - Ladders of insulating material |
| IEC 60216-1:2013 | Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results |
| IEC 61621:1997 | Dry, solid insulating materials - Resistance test to high-voltage, low-current arc discharges |
| IEC 60455-3-8:2013 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories |
| IEC 60672-2:1999 | Ceramic and glass insulating materials - Part 2: Methods of test |
| IEC 61229:1993+AMD1:1998+AMD2:2002 CSV | Rigid protective covers for live working on a.c. installations |
| IEC 62094-1:2002 | Indicator light units for household and similar fixed-electrical installations - Part 1: General requirements |
| IEC 60855-1:2016 | Live working - Insulating foam-filled tubes and solid rods - Part 1: Tubes and rods of a circular cross-section |
| IEC 62192:2009 | Live working - Insulating ropes |
| BIS IS 16167-1 : 2014 | LIVE WORKING - INSULATING FOAM-FILLED TUBES AND SOLID RODS - PART 1: TUBES AND RODS OF A CIRCULAR CROSS-SECTION |
| IEEE DRAFT 1067 : D9 2004 | DRAFT: GUIDE FOR IN-SERVICE USE, CARE, MAINTENANCE, AND TESTING OF CONDUCTIVE CLOTHING FOR USE ON VOLTAGES UP TO 765 KV AC AND +/- 750 KV DC |
| I.S. EN 62011-2:2004 | INSULATING MATERIALS - INDUSTRIAL, RIGID, MOULDED, LAMINATED TUBES AND RODS OF RECTANGULAR AND HEXAGONAL CROSS-SECTION, BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES, - PART 2: METHODS OF TEST |
| BS EN 61067-2:1997 | Glass and glass polyester fibre woven tapes Methods of test |
| CEI EN 60343 : 1997 | RECCOMMENDED TEST METHODS FOR DETERMINING THE RELATIVE RESISTANCE OF INSULATING MATERIALS TO BREAKDOWN BY SURFACE DISCHARGES |
| BS EN 60832-1:2010 | Live working. Insulating sticks and attachable devices Insulating sticks |
| CEI EN 60832-1 : 2011 | LIVE WORKING - INSULATING STICKS AND ATTACHABLE DEVICES - PART 1: INSULATING STICKS |
| CEI EN 60893-2 : 2005 | INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| CEI EN 60684-2 : 2012 | FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST |
| NF EN 50321 : 2000 | ELECTRICALLY INSULATING FOOTWEAR FOR WORKING ON LOW VOLTAGE INSTALLATIONS |
| 15/30323694 DC : 0 | BS EN 62631-2-1 - DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 2-1: RELATIVE PERMITTIVITY AND DISSIPATION FACTOR - TECHNICAL FREQUENCIES (0.1 HZ - 10 MHZ), AC METHODS |
| BS EN 60544-2:2012 | Electrical insulating materials. Determination of the effects of ionizing radiation on insulating materials Procedures for irradiation and test |
| BS EN 62011-2:2004 | Insulating materials. Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes Methods of test |
| 99/201502 DC : 0 | |
| NF EN 62237 : 2005 | LIVE WORKING - INSULATING HOSES WITH FITTINGS FOR USE WITH HYDRAULIC TOOLS AND EQUIPMENT |
| BS EN 60855:1997 | Insulating foam-filled tubes and solid rods for live working |
| 09/30200143 DC : 0 | BS EN 62080 - SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES |
| NF EN 61479 : 2001 AMD 1 2003 | LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL |
| NF EN 60672-2 : 2000 | CERAMIC AND GLASS INSULATING MATERIALS - PART 2: METHODS OF TEST |
| IEC 60370:2017 | Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes - Electric breakdown methods |
| NF EN 61111 : 2009 | LIVE WORKING - ELECTRICAL INSULATING MATTING |
| BS EN 62237:2005 | Live working. Insulating hoses with fittings for use with hydraulic tools and equipment |
| BS EN 60672-2:2000 | Ceramic and glass insulating materials Methods of test |
| BS IEC 61112:1992 | Blankets of insulating material for electrical purposes |
| CEI EN 62237 : 2006 | LIVE WORKING - INSULATING HOSES WITH FITTINGS FOR USE WITH HYDRAULIC TOOLS AND EQUIPMENT |
| IEC 60544-4:2003 | Electrical insulating materials - Determination of the effects of ionizing radiation - Part 4: Classification system for service in radiation environments |
| 02/202972 DC : 0 | IEC 60832-1. ED.2 - LIVE WORKING - INSULATING STICKS AND ATTACHABLE UNIVERSAL DEVICES (FITTINGS) - PART 1: INSULATING STICKS WITH PERMANENTLY ATTACHED FITTINGS |
| CEI EN 60216-8 : 2014 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 8: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS USING SIMPLIFIED PROCEDURES |
| 06/30159668 DC : 0 | BS EN 50508 - MULTI-PURPOSE INSULATING STICKS FOR ELECTRICAL OPERATIONS ON HIGH VOLTAGE INSTALLATIONS |
| BIS IS 8504-7 : 2012 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 7: DETERMINATION OF THERMAL ENDURANCE INDICES (TI AND RTE) OF AN INSULATING MATERIAL USING THE FIXED TIME FRAME METHOD |
| CEI EN 60544-4 : 2005 | ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 4: CLASSIFICATION SYSTEM FOR SERVICE IN RADIATION ENVIRONMENTS |
| I.S. EN 60832-1:2010 | LIVE WORKING - INSULATING STICKS AND ATTACHABLE DEVICES - PART 1: INSULATING STICKS |
| I.S. EN 60855-1:2017 | LIVE WORKING - INSULATING FOAM-FILLED TUBES AND SOLID RODS - PART 1: TUBES AND RODS OF A CIRCULAR CROSS-SECTION |
| I.S. EN 60216-8:2013 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 8: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS USING SIMPLIFIED PROCEDURES (IEC 60216-8:2013 (EQV)) |
| I.S. EN 60984:1993 | SLEEVES OF INSULATING MATERIAL FOR LIVE WORKING |
| IEC TR 62392:2006 | Suitability of typical electrical insulating material (EIM) for polymer recycling |
| I.S. EN 60455-3-8:2013 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES (IEC 60455-3-8:2013 (EQV)) |
| I.S. EN 60672-2:2000 | CERAMIC AND GLASS INSULATING MATERIALS - PART 2: METHODS OF TEST |
| DIN EN 60343 : 1994 | RECOMMENDED TEST METHODS FOR DETERMINING THE RELATIVE RESISTANCE OF INSULATING MATERIALS TO BREAKDOWN BY SURFACE DISCHARGES TEST METHODS |
| IEC 62631-3-1:2016 | Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method |
| UNE-EN 60832-1:2011 | Live working - Insulating sticks and attachable devices -- Part 1: Insulating sticks |
| BIS IS 13774 : 2014 | LIVE WORKING - GLOVES OF INSULATING MATERIAL |
| NFC 18 421 : 2007 | MATTING OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES |
| NF EN 60832-1 : 2010 | LIVE WORKING - INSULATING STICKS AND ATTACHABLE DEVICES - PART 1: INSULATING STICKS |
| IEC 60669-2-1:2002+AMD1:2008+AMD2:2015 CSV | Switches for household and similar fixed electrical installations -Part 2-1: Particular requirements - Electronic switches |
| I.S. EN 62094-1:2003 | INDICATOR LIGHT UNITS FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 60900:2012 | LIVE WORKING - HAND TOOLS FOR USE UP TO 1000 V A.C. AND 1500 V D.C. (IEC 60900:2012 (EQV)) |
| I.S. EN 61235:1997 | LIVE WORKING - INSULATING HOLLOW TUBES FOR ELECTRICAL PURPOSES |
| IEC 61111:2009 | Live working - Electrical insulating matting |
| 03/314451 DC : DRAFT SEP 2003 | IEC 62392 TR ED.1 - SUITABILITY OF TYPICAL ELECTRICAL INSULATING MATERIAL FOR POLYMER RECYCLING |
| BS EN 61212-2:2006 | Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Methods of test |
| EN 61229:1995/A2:2002 | RIGID PROTECTIVE COVERS FOR LIVE WORKING ON A.C. INSTALLATIONS |
| EN 61212-2:2006 | Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test |
| EN 62192:2009 | Live working - Insulating ropes |
| EN 50508:2009 | Multi-purpose insulating sticks for electrical operations on high voltage installations |
| EN 50237:1997 | Gloves and mitts with mechanical protection for electrical purposes |
| EN 62094-1:2003/A11:2003 | INDICATOR LIGHT UNITS FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| EN 62631-3-2:2016 | Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity |
| EN 60695-2-1/2:1996 | FIRE HAZARD TESTING - TEST METHODS - GLOW-WIRE FLAMMABILITY TEST ON MATERIALS |
| EN 62631-3-1:2016 | Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method |
| EN 60544-4:2003 | Electrical insulating materials - Determination of the effects of ionizing radiation - Part 4: Classification system for service in radiation environments |
| EN 62329-2:2006 | Heat shrinkable moulded shapes - Part 2: Methods of test |
| EN 60672-2:2000 | Ceramic and glass insulating materials - Part 2: Methods of test |
| EN 50340:2010 | HYDRAULIC CABLE CUTTING DEVICES - DEVICES TO BE USED ON ELECTRICAL INSTALLATIONS WITH NOMINAL VOLTAGE UP TO AC 30 KV |
| EN 60832-2:2010 | Live working - Insulating sticks and attachable devices - Part 2: Attachable devices |
| EN 60695-2-1-3 : 1996 | FIRE HAZARD TESTING - TEST METHODS - GLOW-WIRE IGNITABILITY TEST ON MATERIALS |
| EN 62237:2005 | Live working - Insulating hoses with fittings for use with hydraulic tools and equipment |
| EN 60544-2:2012 | Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test |
| EN 60216-8:2013 | Electrical insulating materials - Thermal endurance properties - Part 8: Instructions for calculating thermal endurance characteristics using simplified procedures |
| EN 60832-1:2010 | Live working - Insulating sticks and attachable devices - Part 1: Insulating sticks |
| EN 61067-2 : 1997 | Specification for glass and glass polyester fibre woven tapes - Part 2: Methods of test |
| EN 60903 : 2003 COR 2005 | LIVE WORKING - GLOVES OF INSULATING MATERIAL |
| EN 60855-1:2017 | Live working - Insulating foam-filled tubes and solid rods - Part 1: Tubes and rods of a circular cross-section |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60216-4-1:2006 | Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens |
| ISO 62:2008 | Plastics Determination of water absorption |
£75.05
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - English - French
PDF - English - French
PDF 3 Users - English - French
PDF 5 Users - English - French
PDF 9 Users - English - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.