IEC 60455-2:2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Resin based reactive compounds used for electrical insulation - Part 2: Methods of test
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
27-07-2023
Language(s)
English, English - French
Published date
25-06-2015
Publisher
IEC 60455-2:2015 specifies methods of test to be used for testing resin based reactive compounds, their components and cured compounds used for electrical insulation. This third edition cancels and replaces the second edition published in 1998. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- Introduction of test methods related to IEC 60455-3-8;
- Additional and updated test methods for resins. Keywords: resin based reactive compounds used for electrical insulation
| Committee |
TC 15
|
| DevelopmentNote |
Stability date: 2018. (06/2015)
|
| DocumentType |
Standard
|
| Pages |
37
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| SN EN 60455-2:2015 | Identical |
| NBN EN 60455-2 : 2016 | Identical |
| NF EN 60455-2 : 2016 | Identical |
| NEN EN IEC 60455-2 : 2015 | Identical |
| PN EN 60455-2 : 2016 | Identical |
| BS EN 60455-2:2015 | Identical |
| CEI EN 60455-2 : 2016 | Identical |
| EN 60455-2:2015 | Identical |
| BIS IS 13465-2 : 2005(R2015) | Identical |
| UNE-EN 60455-2:2015 | Identical |
| UNE-EN 60455-2:2000 | Identical |
| BS 5664-2.1(1979) : 1979 | Identical |
| SN EN 60455-2 : 1999 | Identical |
| DIN EN 60455-2 : 2016 | Identical |
| NFC 26 160 : AMD 86 | Identical |
| VDE 0355-2 : 2016 | Identical |
| HD 307.2 : 200S1 | Identical |
| 02/208319 DC : DRAFT SEP 2002 | IEC 60455-3-5 ED.3 - RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 5: UNSATURATED POLYESTER BASED IMPREGNATING RESINS |
| BS EN 60455-3-4:2003 | Resin based reactive compounds used for electrical insulation. Specifications for individual materials Filled polyurethane compounds |
| BS EN 60455-3-2:2003 | Resin based reactive compounds used for electrical insulation. Specifications for individual materials Quartz filled epoxy resinous compounds |
| BS EN 60455-3-5:2006 | Resin based reactive compounds used for electrical insulation Specifications for individual materials - Unsaturated polyester based impregnating resins |
| CEI EN 60455-3-1 : 2003 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 1: UNFILLED EPOXY RESINOUS COMPOUNDS |
| EN 60455-3-8:2013 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories |
| I.S. EN 50655-1:2017 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS |
| I.S. EN 60455-3-5:2006 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 5: UNSATURATED POLYESTER BASED IMPREGNATING RESINS |
| EN 61234-2:1998 | Electrical insulating materials - Methods of test for the hydrolytic stability - Part 2: Moulded thermosets |
| EN 60243-1:2013 | ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013) |
| EN 50655-1:2017 | Electric cables - Accessories - Material characterization - Part 1: Fingerprinting for resinous compounds |
| EN 60455-3-5:2006 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 5: Unsaturated polyester based impregnating resins |
| EN 60455-3-3:2003 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 3: Unfilled polyurethane compounds |
| EN 61086-2:2004 | Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test |
| BS EN 60455-3-8:2013 | Resin based reactive compounds used for electrical insulation Specifications for individual materials. Sheet 8: Resins for cable accessories |
| 11/30258054 DC : 0 | BS EN 60243-1 - ELECTRICAL STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES |
| PREN 50655-1 : DRAFT 2015 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS |
| 17/30365113 DC : 0 | BS EN 60455-3-8 ED.2.0 - RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES |
| EN IEC 60370:2018 | Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes - Electric breakdown methods |
| NF EN 60455 3-5 : 2006 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 5: UNSATURATED POLYESTER BASED IMPREGNATING RESINS |
| BS EN 50655-1:2017 | Electric cables. Accessories. Material characterization Fingerprinting for resinous compounds |
| CEI EN 60455-3-8 : 2014 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES |
| NF EN 60455 3-3 : 2003 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 3: UNFILLED POLYURETHANE COMPOUNDS |
| I.S. EN 60455-1:1999 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS |
| IEC 60455-3-2:2003 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Quartz filled epoxy resinous compounds |
| VDE 0349-2 : 1998 | METHOD OF TEST FOR THE HYDROLYTIC STABILITY - MOULDED THERMOSETS |
| DIN EN 61234-2 : 1998 | ELECTRICAL INSULATING MATERIALS - METHOD OF TEST FOR THE HYDROLYTIC STABILITY - PART 2: MOULDED THERMOSETS |
| CEI EN 60455-3-4 : 2003 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 4: FILLED POLYURETHANE COMPOUNDS |
| 15/30325650 DC : 0 | BS EN 50655-1 - ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS |
| NF EN 60455 3-1 : 2003 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 1: UNFILLED EPOXY RESINOUS COMPOUNDS |
| BS EN 61234-2:1998 | Method of test for hydrolytic stability of electrical insulating materials Moulded thermosets |
| BS EN 60455-3-1:2003 | Resin based reactive compounds used for electrical insulation. Specifications for individual materials Unfilled epoxy resinous compounds |
| BS EN 61086-2:2004 | Coatings for loaded printed wire boards (conformal coatings) Methods of test |
| CEI EN 60455-3-3 : 2003 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 3: UNFILLED POLYURETHANE COMPOUNDS |
| I.S. EN 60243-1:2013 | ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013 (EQV)) |
| CEI EN 61086-2 : 2005 | COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS) - PART 2: METHODS OF TEST |
| I.S. EN 60455-3-1:2003 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 1: UNFILLED EPOXY RESINOUS COMPOUNDS |
| IEC 60455-1:1998 | Resin based reactive compounds used for electrical insulation - Part 1: Definitions and general requirements |
| BS EN 60455-3-3:2003 | Resin based reactive compounds used for electrical insulation. Specifications for individual materials Unfilled polyurethane compounds |
| BS EN 60243-1:2013 | Electric strength of insulating materials. Test methods Tests at power frequencies |
| NF EN 60455 3-2 : 2003 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 2: QUARTZ FILLED EPOXY RESINOUS COMPOUNDS |
| CEI EN 60243-1 : 2014 | ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES |
| I.S. EN 60455-3-3:2003 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 3: UNFILLED POLYURETHANE COMPOUNDS |
| I.S. EN 61086-2:2004 | COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS) - PART 2: METHODS OF TEST |
| IEC TR 62039:2007 | Selection guide for polymeric materials for outdoor use under HV stress |
| I.S. EN 60455-3-2:2003 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 2: QUARTZ FILLED EPOXY RESINOUS COMPOUNDS |
| I.S. EN 60455-3-4:2003 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 4: FILLED POLYURETHANE COMPOUNDS |
| IEC 60455-3-4:2003 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 4: Filled polyurethane compounds |
| IEC 60243-1:2013 | Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
| IEC 60455-3-1:2003 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Unfilled epoxy resinous compounds |
| IEC 61086-2:2004 | Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test |
| IEC 60455-3-8:2013 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories |
| IEC 60455-3-5:2006 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 5: Unsaturated polyester based impregnating resins |
| 04/30123435 DC : DRAFT OCT 2004 | IEC 62039 TR ED.1 - POLYMERIC MATERIALS FOR OUTDOOR USE UNDER HV STRESS |
| CEI EN 60455-3-2 : 2003 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 2: QUARTZ FILLED EPOXY RESINOUS COMPOUNDS |
| NF EN 60455-1 : 1999 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - DEFINITIONS AND GENERAL REQUIREMENTS |
| PD IEC/TR 62039:2007 | Selection guide for polymeric materials for outdoor use under HV stress |
| NF EN 60455 3-4 : 2003 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 4: FILLED POLYURETHANE COMPOUNDS |
| I.S. EN IEC 60370:2018 | TEST PROCEDURE FOR THERMAL ENDURANCE OF INSULATING RESINS AND VARNISHES FOR IMPREGNATION PURPOSES - ELECTRIC BREAKDOWN METHODS |
| BS EN IEC 60370:2018 | Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes. Electric breakdown methods |
| CEI EN 60455-3-5 : 2006 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 5: UNSATURATED POLYESTER BASED IMPREGNATING RESINS |
| I.S. EN 60455-3-8:2013 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES (IEC 60455-3-8:2013 (EQV)) |
| IEC 60370:2017 | Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes - Electric breakdown methods |
| IEC 60455-3-3:2003 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 3: Unfilled polyurethane compounds |
| EN 60455-3-4:2003 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 4: Filled polyurethane compounds |
| EN 60455-3-2:2003 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Quartz filled epoxy resinous compounds |
| EN 60455-3-1:2003 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Unfilled epoxy resinous compounds |
| IEC 60243-1:2013 | Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| ISO 2535:2001 | Plastics Unsaturated-polyester resins Measurement of gel time at ambient temperature |
| ISO 2578:1993 | Plastics Determination of time-temperature limits after prolonged exposure to heat |
| ISO 2114:2000 | Plastics (polyester resins) and paints and varnishes (binders) Determination of partial acid value and total acid value |
| ISO 7056:1981 | Plastics laboratory ware Beakers |
| ISO 3521:1997 | Plastics — Unsaturated polyester and epoxy resins — Determination of overall volume shrinkage |
| ISO 3451-1:2008 | Plastics Determination of ash Part 1: General methods |
| IEC 60250:1969 | Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths |
| ISO 3219:1993 | Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate |
| IEC 60455-1:1998 | Resin based reactive compounds used for electrical insulation - Part 1: Definitions and general requirements |
| ISO 11359-3:2002 | Plastics Thermomechanical analysis (TMA) Part 3: Determination of penetration temperature |
| ISO 3001:1999 | Plastics Epoxy compounds Determination of epoxy equivalent |
| ISO 4895:2014 | Plastics Liquid epoxy resins Determination of tendency to crystallize |
| ISO 2039-1:2001 | Plastics Determination of hardness Part 1: Ball indentation method |
| IEC 60455-3-8:2013 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories |
| ISO 11359-2:1999 | Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature |
| IEC 61099:2010 | Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes |
| ISO 14896:2009 | Plastics Polyurethane raw materials Determination of isocyanate content |
| ISO 4583:1998 | Plastics Epoxy resins and related materials Determination of easily saponifiable chlorine |
| ISO 11357-2:2013 | Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height |
| ISO 3679:2015 | Determination of flash no-flash and flash point — Rapid equilibrium closed cup method |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
| ISO 1523:2002 | Determination of flash point — Closed cup equilibrium method |
| ISO 4615:1979 | Plastics Unsaturated polyesters and epoxide resins Determination of total chlorine content |
| ISO 2555:1989 | Plastics Resins in the liquid state or as emulsions or dispersions Determination of apparent viscosity by the Brookfield Test method |
| IEC 60296:2012 RLV | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
| IEC 60093:1980 | Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
| ISO 2554:1997 | Plastics — Unsaturated polyester resins — Determination of hydroxyl value |
| ISO 4573:1978 | Plastics Epoxide resins and glycidyl esters - Determination of inorganic chlorine (Under revision ISO 11376) |
| ISO 1675:1985 | Plastics — Liquid resins — Determination of density by the pyknometer method |
| IEC 60068-2-10:2005 | Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth |
| ISO 175:2010 | Plastics Methods of test for the determination of the effects of immersion in liquid chemicals |
| IEC 60695-11-10:2013 | Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
| ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 604:2002 | Plastics — Determination of compressive properties |
| ISO 179-1:2010 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
| ISO 62:2008 | Plastics Determination of water absorption |
| IEC 60814:1997 | Insulating liquids - Oil-impregnated paper and pressboard - Determination of water by automatic coulometric Karl Fischer titration |
| IEC 60426:2007 | Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods |
| ISO 306:2013 | Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| ISO 4625:1980 | Binders for paints and varnishes Determination of softening point Ring-and-ball method |
| ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
| ISO 584:1982 | Plastics — Unsaturated polyester resins — Determination of reactivity at 80 degrees C (conventional method) |
| IEC 61033:1991 | Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate |
| ISO 178:2010 | Plastics Determination of flexural properties |
| ISO 558:1980 | Conditioning and testing — Standard atmospheres — Definitions |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
| ISO 9396:1997 | Plastics — Phenolic resins — Determination of the gel time of resols under specific conditions using automatic apparatus |
| ISO 2431:2011 | Paints and varnishes Determination of flow time by use of flow cups |
£220.46
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - English - French
PDF - English - French
PDF 3 Users - English - French
PDF 5 Users - English - French
PDF 9 Users - English - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.