• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

IEC 60512-8:1993

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

09-05-2008

Language(s)

English - French

Published date

26-04-1993

FOREWORD
SECTION 1. GENERAL
1.1 Scope
1.2 Normative references
SECTION 2. CONNECTOR TESTS (MECHANICAL)
2.1 Test 15a. Contact retention in insert
2.2 Test 15b. Insert retention in housing (axial)
2.3 Test 15c. Insert retention in housing (torsonial)
2.4 Test 15d. Contact insertion, release and extraction
                  force
2.5 Test 15e. Contact retention in insert, cable nutation
2.6 Test 15f. Effectiveness of connector coupling device
2.7 Test 15g. Robustness of protective cover attachment
SECTION 3. MECHANICAL TESTS ON CONTACTS AND TERMINATIONS
3.1 Test 16a. Probe damage
3.2 Test 16b. Restricted entry
3.3 Test 16c. Contact bending strength
3.4 Test 16d. Tensile strength (crimped connections)
3.5 Test 16e. Gauge retention force (resilient contacts)
3.6 Test 16f. Robustness of terminations
3.7 Test 16g. Measurement of contact deformation after
                  crimping
3.8 Test 16h. Insulating grip effectiveness (crimped
                  connections)
3.9 Test 16i. Grounding contact spring holding force
3.10 Test 16j. Minimum normal force (deleted)
3.11 Test 16k. Stripping force, solderless wrapped
                  connections
3.12 Test 16m. Unwrapping, solderless wrapped connections
3.13 Test 16n. Bending strength, fixed male tabs
3.14 Test 16p. Torsional strength, fixed male tabs
3.15 Test 16q. Tensile and compressive strength, fixed
                  male tabs
3.16 Test 16r. Deflection of male contacts in a connector
                  insert by simulation

Describes tests 15a to 15g and 16a to 16r.

Standards Relationship
CEI 48-9 : 1ED 1988 Identical
NFC 93 400 : 85 AMD 1 88 Identical
NEN IEC 60512-8 : 1999 Identical
DIN IEC 60512-8:1994-05 Identical

02/206148 DC : 0 IEC 60603-7-5. ED. 1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-5: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ (CAT 6, SHIELDED)
BS EN 61076-7:2001 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications Cable outlet accessories with assessed quality, including qualification and capability approval. Sectional specification
BS EN 61076-4-102:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917
BS EN 175201-804:2000 Harmonized system of quality assessment for electronic components Detail specification. Circular connectors. Round contacts, size diameter 1,6 mm, threaded coupling
CEI EN 60512-11-9 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-9: CLIMATIC TESTS TEST 11I: DRY HEAT
BS EN 60603-1:2000 Connectors for frequencies below 3 MHz for use with printed boards Generic specification. General requirements and guide for the preparation of detail specifications with assessed quality
I.S. CECC 75301-802:1995 RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ, TRAPEZOIDAL SHAPED SHELLS AND ROUND CONTACTS 01 MM WITH CRIMP, SOLDER AND PRESS-IN TERMINANONS FOR PRINTED BOARDS
I.S. EN 60512-11-10:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-10: CLIMATIC TESTS - TEST 11J: COLD
IEC PAS 60603-7-3:2004 Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz
BS EN 196103:2000 Blank detail specification: Rotary switches. Assessment level Y
04/30112330 DC : 0 IEC 61076-3-113 ED.1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-113: SCREENED, SERIAL MULTI-CONDUCTOR CABLE TO BOARD CONNECTORS SUITABLE FOR 10 GBIT/SEC DATA RATES
02/206147 DC : DRAFT AUG 2002 IEC 60603-7-4 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-4: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ (CAT 6, UNSHIELDED)
BS EN 61076-3-100:2000 Connectors for use in d.c., low-frequency analogue and digital high-speed data applications Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row
FD ISO/TR 12369 : 2001 FD AGRICULTURAL TRACTORS AND MACHINERY - ELECTRICAL POWER TRANSMISSION CONNECTORS
03/100395 DC : DRAFT APR 2003 EN 175101-809 - DETAIL SPECIFICATION - TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY
02/202649 DC : DRAFT JAN 2002 IEC PAS 61076-3-111. ED.1 - CONNECTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3-111: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED AND UNSHIELDED, FREE AND FIXED CONNECTORS, FOR INDUSTRIAL ENVIRONMENTS FOR FREQUENCIES UP TO 250 MHZ
IEC 60131-1:1984 Lever switches. Part 1: General requirements and rules for the preparation of detail specifications
UNE-EN 50467:2012 Railway applications - Rolling stock - Electrical connectors, requirements and test methods
I.S. EN 50467:2011 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
CEI 48-20 : 1998 RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 3: DETAIL SPECIFICATION FOR A RANGE OF CONNECTORS WITH TRAPEZOIDAL SHAPED METAL SHELLS AND ROUND CONTACTS - REMOVABLE CRIMP CONTACT TYPES WITH CLOSED CRIMP BARRELS, REAR INSERTION/REAR EXTRACTION
I.S. EN 61076-4-103:1999 CONNECTORS FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4-103: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH SHIELDING AND A BASIC GRID OF 2.5 MM
ISO/IEC 24702:2006 Information technology Generic cabling Industrial premises
EN 61076-5 : 2001 CONNECTORS FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 5: IN-LINE SOCKETS WITH ASSESSED QUALITY - SECTIONAL SPECIFICATION
EN 196000 : 92 AMD 1 2001 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION: ELECTROMECHANICAL SWITCHES
EN 60603-13:1998 Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID)
EN 61076-4-103:1999 Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm
EN 61076-4-102:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors - Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917
EN 60512-11-9:2002 Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat
EN 60512-11-10:2002 Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold
EN 61076-7:2000 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification
EN 60130-17:1999 Connectors for frequencies below 3 MHz - Part 17: Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries
EN 61076-4-110:2002 Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
CEI 13-32 : 2000 WATT-VAR-HOUR METERS FOR LOW-VOLTAGE THREE-PHASE NETWORKS (INTEGRATED UNITS) PRESETTED FOR PROCESSING AND REMOTE MANAGEMENT OF DATA WITH OR WITHOUT INSERTION OF CURRENT TRANSFORMERS
IEC 60807-9:1993 Rectangular connectors for frequencies below 3 MHz - Part 9: Detail specification for a range of peritelevision connectors
BS EN 60130-17:1999 Connectors for frequencies below 3 MHz Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries
BS EN 196403:2000 Harmonized systems of quality assessment for electronic components. Blank detail specification: push button switches. Assessment level Y
CEI EN 61076-4-110 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-110: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR LATCHED CABLE CONNECTOR SYSTEM HAVING A BASIC GRID OF 2,0 MM INCLUDING FULL SHIELDING AND LATCHING FUNCTION
BS EN 60512-11-10:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11j. Cold
BS EN 61076-4-103:1999 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm - Cable to board connectors, shielded against EMC ,grid 2,5 mm,for high speed data rates,for use with printed boards
00/201724 DC : DRAFT APR 2000 IEC 61076-1 - CONNECTORS - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
02/203213 DC : DRAFT MAR 2002 IEC 62282-2. ED.1.0 - FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES
CEI EN 50467 : 2013 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
03/100166 DC : DRAFT JAN 2003 IEC 60603-7-5 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-5: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ
03/100167 DC : DRAFT JAN 2003 IEC 60603-3-105 ED.1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-105: DETAIL SPECIFICATION FOR 4 PAIR BALANCED, INDIVIDUALLY SHIELDED, FIXED AND FREE CONNECTORS WITH CHARACTERISTIC IMPEDENCE OF 100 OHMS, COVERING A FREQUENCY RANGE FROM DC TO 1500 MHZ
04/30112325 DC : DRAFT APR 2004 IEC 61076-3-104 ED.2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-104: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR 8-WAY, SHIELDED FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 1000 MHZ
BS EN 196000:1993 Harmonized system of quality assessment for electronic components. Generic specification. Electromechanical switches
PREN 50467 : DRAFT 2009 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
CSA E60127.6 : 2003 MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS
CAN/CSA-E60127-6-03 (R2017) Miniature Fuses - Part 6: Fuse-Holders for Miniature Cartridge Fuse-Links (Adopted CEI/IEC 127-6:1994, first edition, 1994-04, including Amendment 1:1996, with Canadian deviations) | Coupe-circuit miniatures - Partie 6: Ensembles-porteurs pour cartouches de coupe-circuit miniatures (norme CEI/IEC 127-6:1994 adoptée, première édition, 1994-04, y compris l\'Amendement 1:1996, avec exigences propres au Canada)
BS EN 60352-1:1998 Solderless connections Wrapped connections. General requirements, test methods and practical guidance
I.S. EN 60603-2:1998 CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 2: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH ASSESSED QUALITY, FOR PRINTED BOARDS, FOR BASIC GRID OF 2,54 MM (0,1 IN) WITH COMMON MOUNTING FEATURES
CEI EN 60603-1 : 2001 CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 1: GENERIC SPECIFICATION; GENERAL REQUIREMENTS AND GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATIONS, WITH ASSESSED QUALITY
IEC PAS 61076-3-110:2002 Connectors for electronic equipment - Part 3-110: Detail specification for 8 way connectors for frequencies up to 600 MHz
IEC 60130-17:1998 Connectors for frequencies below 3 MHz - Part 17: Detailspecification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries
03/100442 DC : DRAFT MAY 2003 IEC 60352-2 ED.2 - SOLDERLESS CONNECTIONS - PART 2: SOLDERLESS CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
EN 196110 : 2002 SECTIONAL SPECIFICATION - ROTARY SWITCHES - CAPABILITY APPROVAL
DD CLC/TS 50467:2008 Railway applications. Rolling stock. Electrical connectors, requirements and test methods
CECC 75301-802 : 1994 RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ, TRAPEZOIDAL SHAPED SHELLS AND ROUND CONTACTS 01 MM WITH CRIMP, SOLDER AND PRESS-IN TERMINANONS FOR PRINTED BOARDS
04/30124126 DC : DRAFT OCT 2004 IEC 61076-2-104 ED.1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-104: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M8 CONNECTORS WITH SCREW OR SNAP-LOCKING FOR LOW VOLTAGE APPLICATIONS
BS EN 60603-13:1998 Connectors for frequencies below 3 MHz for use with printed boards Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in) with free connectors for non-accessible insulation displacement terminations (ID)
CSA E60127.6 : 2003 : R2012 MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS
98/230855 DC : DRAFT APRIL 1998 IEC 61076-4-112 - CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C, LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 112 - DETAIL SPECIFICATION FOR TWO-PART CONNECTORS FOR PRINTED BOARDS FOR BASIC GRID OF 2,00 MM, WITH SQUARE MALE CONTACTS OF 0,50 X 0,50 MM
IEC PAS 61076-3-104:2002 Connectors for electronic equipment - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors, for data transmissions with frequencies up to 600 MHz minimum
I.S. EN 61076-4-102:1998 CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 102: DETAIL SPECIFICATION FOR TWO-PART SINGLE-POLE CONNECTORS, FOR MULTIPLE USES ON PLUG-IN UNITS, WITH PRE-CENTRING, CODING AND EARLY MATING FEATURES, HAVING A METRIC GRID IN ACCORDANCE WITH IEC 60917
I.S. EN 60130-17:1999 CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 17: DETAIL SPECIFICATION FOR INTERCONNECTION DEVICES WHICH PERMIT MULTI-DIRECTIONAL MATING, FOR USE WITH RECHARGEABLE BATTERIES
I.S. EN 60512-11-9:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-9: CLIMATIC TESTS - TEST 11I: DRY HEAT
I.S. EN 61076-5:2002 CONNECTORS FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 5: IN-LINE SOCKETS WITH ASSESSED QUALITY - SECTIONAL SPECIFICATION
IEC 60131-4:1987 Lever switches. Part 4: Requirements for miniature toggle switches
CECC 75101-807 : 1994 MODULAR TWO-PART CONNECTORS FOR PRINTED BOARDS AND BACKPLANES, GRIDOF 2.5 mm - ACCORDING TO IEC 917 (DETAIL SPECIFICATION)
IEC PAS 61076-3-109:2001 Connectors for electronic equipment - Part 3-109: Detail specification for two-part cable to board connector for high speed data application in a harsh industrial environment - Protection rate IP67 according to IEC 60529
I.S. CECC 75101-807:1994 MODULAR TWO-PART CONNECTORS FOR PRINTED BOARDS AND BACKPLANES, GRID OF 2.5 MM - (ACCORDING TO IEC 917) (DETAIL SPECIFICATION)
S.R. CLC/TS 50467:2008 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
EN 175101-809:2004/corrigendum Jun. 2005 DETAIL SPECIFICATION: TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY
CEI EN 61076-4-103 : 2001 CONNECTORS FOR USE IN D.C. LOW - FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS PART 4-103: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH SHIELDING AND A BASIC GRID OF 2,5 MM
BS QC 480000(1995) : 1995 CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C. LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 1: GENERIC SPECIFICATION
CEI 48-19 : 1998 RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 2: DETAIL SPECIFICATION FOR A RANGE OF CONNECTORS, WITH ASSESSED QUALITY, WITH TRAPEZOIDAL SHAPED METAL SHELLS AND ROUND CONTACTS - FIXED SOLDER CONTACT TYPES
NF EN 61076 4 107 : 2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-107: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR SHIELDED TWO-PART CONNECTORS HAVING A BASIC GRID OF 2,0 MM, FIXED PART WITH SOLDER AND PRESS-IN TERMINATIONS FOR PRINTED BOARDS, FREE PART WITH NON-ACCESSIBLE INSULATION DISPLACEMENT AND CRIMP TERMINATIONS
NF EN 61076 4 102 : 1998 CONNECTORS WITH ASSESSED QUALITY FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 102: DETAIL SPECIFICATION FOR TWO-PART SINGLE-POLE CONNECTORS, FOR MULTIPLE USES ON PLUG-IN UNITS, WITH PRE-CENTERING, CODING AND EARLY MATING FEATURES, HAVING A METRIC GRID IN ACCORDANCE WITH IEC 60917
BS EN 60603-2:1998 Connectors for frequencies below 3 MHz for use with printed boards Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features
ISO/IEC 14575:2000 Information technology Microprocessor systems Heterogeneous InterConnect (HIC) (Low-Cost, Low-Latency Scalable Serial Interconnect for Parallel System Construction)
CEI EN 60130-17 : 2001 CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 17: DETAIL SPECIFICATION FOR INTERCONNECTION DEVICES WHICH PERMIT MULTI-DIRECTIONAL MATING, FOR USE WITH RECHARGEABLE BATTERIES
12/30259014 DC : 0 BS EN 60127-6 - MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE FUSE-LINKS
CEI EN 60512-15-8 : 1997 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT - BASIC TESTING PROCEDURES AND MEASURING METHODS - PART 15: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - SECTION 8: TEST 15H - CONTACT RETENTION SYSTEM RESISTANCE TO TOOL APPLICATION
CEI 48-15 : 1998 FLAT, QUICK-CONNECT TERMINATIONS
16/30325971 DC : 0 BS ISO/IEC 11801-1 - INFORMATION TECHNOLOGY - GENERIC CABLING FOR CUSTOMER PREMISES - PART 1: GENERAL REQUIREMENTS
BS EN 61076-4-110:2002 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
03/100336 DC : DRAFT MAR 2003 IEC 60603-7-7 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-7: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 600 MHZ
03/100165 DC : DRAFT JAN 2003 IEC 60603-7-2 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-2: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ
I.S. EN 196110:2002 SECTIONAL SPECIFICATION: ROTARY SWITCHES - CAPABILITY APPROVAL
I.S. EN 61076-4-110:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-110: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR LATCHED CABLE CONNECTOR SYSTEM HAVING A BASIC GRID OF 2,0 MM INCLUDING FULL SHIELDING AND LATCHING FUNCTION
CEI EN 60352-1 : 1998 SOLDERLESS CONNECTIONS - PART 1: WRAPPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
CEI 13-26 : 1999 WATT-HOUR METERS AND POWER LIMITERS FOR LOW-VOLTAGE NETWORKS (INTEGRATED UNITS) PERMITTED OR NOT FOR PROCESSING AND REMOTE MANAGEMENT OF DATA
IEC 61076-5:2001 Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 5: In-line sockets with assessed quality - Sectional specification
I.S. EN 60512-15-8:1999 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT - BASIC TESTING PROCEDURES AND MEASURING METHODS - PART 15: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - SECTION 8: TEST 15H - CONTACT RETENTION SYSTEM RESISTANCE TO TOOL APPLICATION
I.S. EN 61076-4-104:1999 CONNECTORS FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 4-104: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART MODULAR CONNECTORS, BASIC GRID OF 2.0 MM WITH TERMINATIONS ON A MULTIPLE GRID OF 0.5 MM
IEC 61076-4-110:2001 Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
IEC PAS 61076-3-111:2002 Connectors for electronic equipment - Part 3-111: Detail specification for 8-way, shielded and unshielded, free and fixed connectors, for industrial environments for frequencies up to 250 MHz
IEC 61076-4-101:2001 Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
IEC 61076-4-100:2001 Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
IEC 60512-11-10:2002 Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold
11/30242646 DC : DRAFT FEB 2011 BS EN 62282-2 - FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES
IEC 61076-4-102:1997 Connectors with assessed quality for use in d.c., low-frequencyanalogue and in digital high speed data applications - Part 4:Printed board connectors - Section 102: Detail specification fortwo-part single-pole connectors, for multiple uses on plug-inunits, with pre-centring, coding and early mating features, havinga metric grid in accordance with IEC 60917
IEC 61076-3-100:1999 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row
IEC 60603-13:1995 Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID)
IEC 60512-11-9:2002 Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat
EN 175201-804:1999 Detail Specification: Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling
CLC/TS 50467 : 2008 COR 2008 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
DIN EN 60352-1:1998-04 SOLDERLESS CONNECTIONS - PART 1: WRAPPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
01/207165 DC : DRAFT OCT 2001 IEC 61076-3-110 ED.1 - CONNECTORS FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED APPLICATIONS - PART 3-110: DETAIL SPECIFICATION FOR 8 WAY CONNECTORS FOR FREQUENCIES UP TO 600 MHZ [CATEGORY 7 DETAIL SPECIFICATION]
06/30151382 DC : DRAFT JUN 2006 BS ISO/IEC 24702 - INFORMATION TECHNOLOGY - GENERIC CABLING - INDUSTRIAL PREMISES
BS EN 61076-5:2001 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications In-line sockets with assessed quality. Sectional specification
CEI EN 60512-11-10 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-10: CLIMATIC TESTS - TEST 11J: COLD
09/30208429 DC : 0 BS EN 50467 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
04/30124122 DC : DRAFT OCT 2004 IEC 61076-2-101 ED.2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-101: CIRCULAR CONNECTORS. DETAIL SPECIFICATION FOR M12 CONNECTORS WITH SCREW-LOCKING FOR LOW VOLTAGE APPLICATIONS
CEI EN 61076-4-104 : 2001 CONNECTORS FOR USE IN D.C. LOW FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS PART 4-104: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY DETAIL SPECIFICATION FOR TWO-PART MODULAR CONNECTORS, BASIC GIRD OF 2,0 MMS WITH TERMINATIONS ON A MULTIPLE GIRD OF 0,5 MM
BS EN 61076-4-107:2001 Connectors for electronic equipment Printed board connectors with assessed quality. Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations
BS EN 175101-802:2000 Harmonized system of quality assessment for electronic components. Detail specification Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows
CEI EN 61076-4-102 : 1998 CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS SECTION 102: DETAIL SPECIFICATION FOR TWO-PART SINGLE-POLE CONNECTORS, FOR MULTIPLE USES ON PLUG-IN UNITS, WITH PRE-CENTRING, CODING AND EARLY MATING FEATURES, HAVING A METRIC GRID IN ACCORDANCE WITH IEC 60917
BS EN 50467:2011 Railway applications. Rolling stock. Electrical connectors, requirements and test methods
BS EN 61076-4-104:1999 Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm - Detail specification for two part modular connectors (with optional shielding plates) for printed boards and backplanes, basic grid 2,0 mm, with terminations on a multiple grid of 0,5 mm
BS EN 175101-809:2004 Harmonized system of quality assessment for electronic components. Detail specification Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality
BS EN 60512-11-9:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11i. Dry heat
01/206171 DC : DRAFT AUG 2001
IEC 60807-1:1991 Rectangular connectors for frequencies below 3 MHz - Part 1:Generic specification - General requirements and guide for thepreparation of detail specifications for connectors with assessedquality
I.S. EN 175101-809:2004 DETAIL SPECIFICATION - TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2.54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75101-801, WITH ASSESSED QUALITY
IEC 60603-11:1992 Connectors for frequencies below 3 MHz for use with printed boards - Part 11: Detail specification for concentric connectors (dimensions for free connectors and fixed connectors)
IEC 61076-4-104:1999 Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm
IEC 60603-2:1995 Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features
EN 60603-2:1998/A1:2005 CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 2: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH ASSESSED QUALITY, FOR PRINTED BOARDS, FOR BASIC GRID OF 2,54 MM (0,1 IN) WITH COMMON MOUNTING FEATURES
EN 175101-802:1999 Detail specification: Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows
EN 61076-4-107:2001 Connectors for electronic equipment - Part 4-107: Printed board connectors with assessed quality - Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations
EN 61076-3-100:2000 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row
EN 60352-1:1997 Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance
EN 60603-1:1998 Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality
EN 60512-15-8:1995 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 15: Mechanical tests on contacts and terminations - Section 8: Test 15h - Contact retention system resistance to tool application
EN 50467 : 2011 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
EN 61076-4-104:1999 Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm

IEC 60068-2-21:2006 Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
IEC 60352-1:1997 Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance

View more information
£220.46
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.