IEC 60571:2012
Current
Current
The latest, up-to-date edition.
Railway applications - Electronic equipment used on rolling stock
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English - French
Published date
27-09-2012
Publisher
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Environmental service conditions
of operation
5 Electrical service conditions
6 Reliability, maintainability and expected
useful life
7 Design
8 Components
9 Construction
10 Safety
11 Documentation
12 Testing
Annex A (informative) - List of subclauses in which
agreement between the parties (e.g user
and manufacturer) is mentioned
Bibliography
IEC 60571:2012 covers the conditions of operation, design, construction, and testing of electronic equipment, as well as basic hardware and software requirements considered necessary for competent, reliable equipment. Applies to all electronic equipment for control, regulation, protection, supply, etc., installed on rail vehicles and associated with: either the accumulator battery of the vehicle; or a low voltage power supply source with or without a direct connection to the contact system. One of the technical changes with respect to the previous edition consists of the addition of nominal voltages of equipment.
| DevelopmentNote |
Supersedes IEC 60571-1, IEC 60571-2, IEC 60571-3 (03/2001) Stability Date: 2017. (10/2012)
|
| DocumentType |
Standard
|
| Pages |
92
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN IEC 60571 : 2003 AMD 1 2006 | Identical |
| NF EN 50155 : 2007 | Identical |
| DIN 43321:1979-02 | Similar to |
| CEI EN 60077-3 : 2002 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 3: ELECTROTECHNICAL COMPONENTS - RULES FOR D/C/ CIRCUIT-BREAKERS |
| CEI EN 61375-3-1 : 2013 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-1: MULTIFUNCTION VEHICLE BUS (MVB) |
| 11/30243697 DC : 0 | BS IEC 62718 - RAILWAY APPLICATIONS - ROLLING STOCK - D.C. SUPPLIED ELECTRONIC BALLASTS FOR LIGHTING FLUORESCENT LAMPS |
| 10/30211766 DC : 0 | BS EN 61881-3 - RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITOR |
| CEI EN 61375-2-2 : 2013 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 2-2: WIRE TRAIN BUS CONFORMANCE TESTING |
| BS EN 60077-2:2017 | Railway applications. Electric equipment for rolling stock Electrotechnical components. General rules |
| BS EN 61287-1:2014 | Railway applications. Power converters installed on board rolling stock Characteristics and test methods |
| BS EN 61881-3 : 2012 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS |
| BS EN 60077-4:2003 | Railway applications. Electric equipment for rolling stock Electrotechnical components. Rules for AC circuit-breakers |
| 09/30205442 DC : 0 | BS EN 61375-1 - ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK - PART 1: TCN - TRAIN COMMUNICATION NETWORK GENERAL ARCHITECTURE |
| I.S. EN 62625-1:2013 | ELECTRONIC RAILWAY EQUIPMENT - ON BOARD DRIVING DATA RECORDING SYSTEM - PART 1: SYSTEM SPECIFICATION |
| I.S. EN 61375-2-2:2012 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 2-2: WIRE TRAIN BUS CONFORMANCE TESTING (IEC 61375-2-2:2012 (EQV)) |
| IEC 61133:2016 | Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service |
| UNE-EN 61287-1:2015 | Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods |
| IEC 62236-3-2:2018 RLV | Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
| EN 61375-2-5 : 2015 | Electronic railway equipment - Train communication network (TCN) - Part 2-5: Ethernet train backbone |
| IEC 61133:2016 RLV | Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service |
| EN 61375-2-2:2012 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 2-2: WIRE TRAIN BUS CONFORMANCE TESTING (IEC 61375-2-2:2012) |
| EN 60925:1991/A2:2001 | SPECIFICATION FOR PERFORMANCE REQUIREMENTS FOR D.C. SUPPLIED ELECTRONIC BALLASTS FOR TUBULAR FLUORESCENT LAMPS |
| NF EN 60077-4 : 2003 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 4: ELECTROTECHNICAL COMPONENTS - RULES FOR AC CIRCUIT-BREAKERS |
| EN 60077-3:2002 | Railway applications - Electric equipment for rolling stock - Part 3: Electrotechnical components - Rules for d.c. circuit-breakers |
| EN 62718:2016 | Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps |
| NF EN 60077-3 : 2002 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 3: RULES FOR DC CIRCUIT-BREAKERS |
| EN 61375-2-1 : 2012 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 2-1: WIRE TRAIN BUS (WTB) (IEC 61375-2-1:2012) |
| BS EN 61375-2-2:2012 | Electronic railway equipment. Train communication network (TCN) Wire Train Bus conformance testing |
| I.S. EN 60925:1992 | D.C. SUPPLIED ELECTRONIC BALLASTS FOR TUBULAR FLUORESCENT LAMPS - PERFORMANCE REQUIREMENTS |
| UNE-EN 61377:2016 | Railway applications - Rolling stock - Combined test method for traction systems |
| 09/30205450 DC : 0 | BS EN 61375-2-2 - ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK - PART 2-2: WTB - WIRE TRAIN BUS CONFORMANCE TESTING |
| BS EN 62718:2016 | Railway applications. Rolling stock. DC supplied electronic ballasts for lighting fluorescent lamps |
| 14/30286287 DC : 0 | BS EN 62625-2 ED 1.0 - ELECTRONIC RAILWAY EQUIPMENT - ON-BOARD DRIVING DATA RECORDING SYSTEM - PART 2: CONFORMITY TESTING |
| 15/30288088 DC : DRAFT FEB 2015 | BS EN 62864-1 ED 1.0 - RAILWAY APPLICATIONS - ROLLING STOCK - POWER SUPPLY WITH ONBOARD ENERGY STORAGE SYSTEM - PART 1: SERIES HYBRID SYSTEM |
| 16/30296085 DC : 0 | BS EN 60077-2 ED. 2.0 - RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 2: ELECTROTECHNICAL COMPONENTS - GENERAL RULES |
| BS EN 60925:1991 | Specification for performance requirements for d.c. supplied electronic ballasts for tubular fluorescent lamps |
| BS EN 61377:1997 | Electric traction. Rolling stock. Combined testing of inverter-fed alternating current motors and their control |
| 09/30205458 DC : 0 | BS EN 61375-3-2 - ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK - PART 3-2: MVB - MULTIPURPOSE VEHICLE BUS CONFORMANCE TESTING |
| 05/30133277 DC : DRAFT MAY 2005 | |
| CEI EN 61375-3-2 : 2013 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-2: MVB (MULTIFUNCTION VEHICLE BUS) CONFORMANCE TESTING |
| IEC 62236-3-2:2018 | Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
| AS/RISSB 7722 : 2016 | EMC Management |
| IEC 62236-3-2 REDLINE : 3ED 2018 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 3-2: ROLLING STOCK - APPARATUS |
| CEI EN 62625-1 : 2014 | ELECTRONIC RAILWAY EQUIPMENT - ON BOARD DRIVING DATA RECORDING SYSTEM - PART 1: SYSTEM SPECIFICATION |
| I.S. EN 61375-2-3:2015 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 2-3: TCN COMMUNICATION PROFILE |
| I.S. EN 61881-3:2012 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS (IEC 61881-3:2012 (EQV)) |
| BS EN 61377-2:2002 | Railway applications. Rolling stock Combined testing. Chopper-fed direct current traction motors and their control |
| EN IEC 62928:2018 | Railway applications - Rolling stock - Onboard lithium-ion traction batteries |
| I.S. EN 61375-3-2:2012 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-2: MVB (MULTIFUNCTION VEHICLE BUS) CONFORMANCE TESTING (IEC 61375-3-2:2012 (EQV)) |
| IEC 62888-3:2018 | Railway applications - Energy measurement on board trains - Part 3: Data handling |
| IEC 62888-1:2018 | Railway applications - Energy measurement on board trains - Part 1: General |
| IEC 60077-1 REDLINE : 2ED 2017 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 1: GENERAL SERVICE CONDITIONS AND GENERAL RULES |
| I.S. EN 61377-3:2003 | RAILWAY APPLICATIONS - ROLLING STOCK - PART 3: COMBINED TESTING OF ALTERNATING CURRENT MOTORS, FED BY AN INDIRECT CONVERTOR, AND THEIR CONTROL SYSTEM |
| IEC 62625-2:2016 | Electronic railway equipment - On board driving data recording system - Part 2: Conformity testing |
| VDE 0559-4 : 1988 | POWER CONVERTERS FOR ROLLING STOCK - DIRECT D.C. CONVERTERS (D.C. CHOPPER CONVERTERS) |
| DIN VDE 0559-4 : 1988 | POWER CONVERTERS FOR ROLLING STOCK - DIRECT D.C. CONVERTERS (D.C. CHOPPER CONVERTERS) |
| I.S. EN 61375-2-1:2012 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 2-1: WIRE TRAIN BUS (WTB) (IEC 61375-2-1:2012 (EQV)) |
| 13/30264553 DC : 0 | BS EN 61287-1 ED 3.0 - RAILWAY APPLICATIONS - POWER CONVERTORS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS |
| UNE-EN 62718:2016 | Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps |
| CEI EN 62625-2 : 1ED 2017 | ELECTRONIC RAILWAY EQUIPMENT - ON BOARD DRIVING DATA RECORDING SYSTEM - PART 2: CONFORMITY TESTING |
| 09/30205454 DC : 0 | BS EN 61375-3-1 - ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK - PART 3-1: MVB - MULTIPURPOSE VEHICLE BUS |
| 10/30235845 DC : 0 | BS EN 61881-3 - RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITOR FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS |
| 14/30288062 DC : 0 | BS EN 61377 ED. 2.0 - RAILWAY APPLICATIONS - ROLLING STOCK - COMBINED TEST METHOD FOR TRACTION SYSTEMS |
| BS EN 61375-3-1:2012 | Electronic railway equipment. Train communication network (TCN) Multifunction Vehicle Bus (MVB) |
| CEI EN 60077-4 : 2003 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 4: ELECTROTECHNICAL COMPONENTS - RULES FOR AC CIRCUIT-BREAKERS |
| IEC 62928:2017 | Railway applications - Rolling stock - Onboard lithium-ion traction batteries |
| UNE-EN 62625-2:2017 | Electronic railway equipment - On board driving data recording system - Part 2: Conformity testing |
| EN 62625-1:2013/A11:2017 | ELECTRONIC RAILWAY EQUIPMENT - ON BOARD DRIVING DATA RECORDING SYSTEM - PART 1: SYSTEM SPECIFICATION (IEC 62625-1:2013) |
| IEEE 1482.1-2013 REDLINE | IEEE Standard for Rail Transit Vehicle Event Recorders |
| NF EN 61377-2 : 2003 | RAILWAY APPLICATIONS - ROLLING STOCK - COMBINED TESTING - PART 2: CHOPPER-FED DIRECT CURRENT TRACTION MOTORS AND THEIR CONTROL |
| BS EN 62625-1 : 2013 | ELECTRONIC RAILWAY EQUIPMENT - ON BOARD DRIVING DATA RECORDING SYSTEM - PART 1: SYSTEM SPECIFICATION (IEC 62625-1:2013) |
| I.S. EN 60077-1:2017 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 1: GENERAL SERVICE CONDITIONS AND GENERAL RULES |
| IEC 62973-1:2018 | Railway applications - Rolling stock - Batteries for auxiliary power supply systems - Part 1: General requirements |
| I.S. EN 62718:2016 | RAILWAY APPLICATIONS - ROLLING STOCK - DC SUPPLIED ELECTRONIC BALLASTS FOR LIGHTING FLUORESCENT LAMPS |
| IEC 60077-2 REDLINE : 2ED 2017 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 2: ELECTROTECHNICAL COMPONENTS - GENERAL RULES |
| IEC 60077-3:2001 | Railway applications - Electric equipment for rolling stock - Part 3: Electrotechnical components - Rules for d.c. circuit-breakers |
| IEC 60077-2:2017 | Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules |
| IEC 61881-3:2012+AMD1:2013 CSV | Railway applications - Rolling stock equipment - Capacitors forpower electronics - Part 3: Electric double-layer capacitors |
| EN 60077-4:2003 | Railway applications - Electric equipment for rolling stock - Part 4: Electrotechnical components - Rules for AC circuit-breakers |
| CEI EN 61375-2-1 : 2013 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 2-1: WIRE TRAIN BUS (WTB) |
| 13/30269687 DC : 0 | BS EN 61375-2-3 ED 1.0 - ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 2-3: TCN COMMUNICATION PROFILE |
| 09/30205446 DC : 0 | BS EN 61375-2-1 - ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK - PART 2-1: WTB - WIRE TRAIN BUS |
| EN 60077-2:2017 | Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules |
| BS EN 61375-2-5:2015 | Electronic railway equipment. Train communication network (TCN) Ethernet train backbone |
| 03/306438 DC : DRAFT APR 2003 | IEC 61133 ED. 2 - RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE |
| 18/30363296 DC : 0 | BS EN 60077-4 - RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 4: ELECTROTECHNICAL COMPONENTS - RULES FOR AC CIRCUIT-BREAKERS |
| EN 61375-2-3:2015/A11:2017 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 2-3: TCN COMMUNICATION PROFILE (IEC 61375-2-3:2015) |
| 12/30235235 DC : 0 | BS EN 61375-2-5 - ELECTRONIC RAILWAY EQUIPMENT - TRAIN BACKBONE - PART 2-5: ETHERNET TRAIN BACKBONE |
| BS EN 61377-1:2006 | Railway applications. Rolling stock Combined testing of inverter-fed alternating current motors and their control system |
| 12/30202429 DC : 0 | BS EN 62625-1 - ELECTRONIC RAILWAY EQUIPMENT ON BOARD DRIVING DATA RECORDING SYSTEM - PART 1: SYSTEM SPECIFICATION |
| BS EN 62625-2:2016 | Electronic railway equipment. On board driving data recording system Conformity testing |
| BS EN 61375-2-1:2012 | Electronic railway equipment. Train communication network (TCN) Wire Train Bus (WTB) |
| BS EN 61375-2-3 : 2015 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 2-3: TCN COMMUNICATION PROFILE (IEC 61375-2-3:2015) |
| I.S. EN 62625-2:2016 | ELECTRONIC RAILWAY EQUIPMENT - ON BOARD DRIVING DATA RECORDING SYSTEM - PART 2: CONFORMITY TESTING |
| I.S. EN 62864-1:2016 | RAILWAY APPLICATIONS - ROLLING STOCK - POWER SUPPLY WITH ONBOARD ENERGY STORAGE SYSTEM - PART 1: SERIES HYBRID SYSTEM |
| I.S. EN 61375-2-5:2015 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 2-5: ETHERNET TRAIN BACKBONE |
| NF EN 62718 : 2017 | RAILWAY APPLICATIONS - ROLLING STOCK - DC SUPPLIED ELECTRONIC BALLASTS FOR LIGHTING FLUORESCENT LAMPS |
| UNE-EN 62864-1:2017 | Railway applications - Rolling stock - Power supply with onboard energy storage system - Part 1: Series hybrid system |
| IEC 61375-2:2007 | Electric railway equipment - Train bus - Part 2: Train communication network conformance testing |
| I.S. EN 61377-1:2007 | RAILWAY APPLICATIONS - ROLLING STOCK - PART 1: COMBINED TESTING OF INVERTER-FED ALTERNATING CURRENT MOTORS AND THEIR CONTROL SYSTEM |
| IEC 62845:2015 | Railway applications - Radio remote control system of traction vehicles for shunting application |
| I.S. EN 60077-3:2002 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 3: ELECTROTECHNICAL COMPONENTS - RULES FOR D.C. CIRCUIT-BREAKERS |
| IEC 61375-2-5:2014 | Electronic railway equipment - Train communication network (TCN) - Part 2-5: Ethernet train backbone |
| IEC 61375-3-1:2012 | Electronic railway equipment - Train communication network (TCN) - Part 3-1: Multifunction Vehicle Bus (MVB) |
| IEC 61377:2016 | Railway applications - Rolling stock - Combined test method for traction systems |
| 16/30296081 DC : 0 | BS EN 60077-1 ED. 2.0 - RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 1: GENERAL SERVICE CONDITIONS AND GENERAL RULES |
| IEC 61375-2-1:2012 | Electronic railway equipment - Train communication network (TCN) - Part 2-1: Wire Train Bus (WTB) |
| IEC 61375-3-2:2012 | Electronic railway equipment - Train communication network (TCN) - Part 3-2: MVB (Multifunction Vehicle Bus) conformance testing |
| IEC 61375-2-2:2012 | Electronic railway equipment - Train communication network (TCN) - Part 2-2: Wire Train Bus conformance testing |
| IEC 61377-2:2002 | Railway applications - Rolling stock - Combined testing - Part 2: Chopper-fed direct current traction motors and their control |
| IEC 61377-1:2006 | Railway applications - Rolling stock - Part 1: Combined testing of inverter-fed alternating current motors and their control system |
| IEC 60925:1989+AMD1:1996+AMD2:2001 CSV | DC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements |
| IEC 61377-3:2002 | Railway applications - Rolling stock - Part 3: Combined testing of alternating current motors, fed by an indirect convertor, and their control system |
| IEC 61287-1:2014 | Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods |
| IEC 60077-4:2003 | Railway applications - Electric equipment for rolling stock - Part 4: Electrotechnical components - Rules for AC circuit-breakers |
| BS EN 60077-1:2017 | Railway applications. Electric equipment for rolling stock General service conditions and general rules |
| BS EN 61377-3:2002 | Railway applications. Rolling stock Combined testing of alternating current motors, fed by an indirect convertor, and their control system |
| BS EN 61375-3-2:2012 | Electronic railway equipment. Train communication network (TCN) MVB (Multifunction Vehicle Bus) conformance testing |
| 03/306439 DC : DRAFT APR 2003 | IEC 61377-1 ED. 1 - ELECTRIC TRACTION - ROLLING STOCK - COMBINED TESTING - PART 1: COMBINED TESTING OF INVERTER-FED ALTERNATING CURRENT MOTORS AND THEIR CONTROL |
| 13/30200410 DC : 0 | BS EN 62580-1 ED 1.0 - ELECTRONIC RAILWAY EQUIPMENT - ON-BOARD MULTIMEDIA AND TELEMATIC SUBSYSTEMS FOR RAILWAYS - PART 1: GENERAL ARCHITECTURE |
| I.S. EN 61287-1:2014 | RAILWAY APPLICATIONS - POWER CONVERTERS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS |
| 05/30133337 DC : DRAFT MAY 2005 | IEC 61375-1 - ELECTRIC RAILWAY EQUIPMENT - TRAIN BUS - PART 1: TRAIN COMMUNICATION NETWORK |
| BS EN 60077-3:2002 | Railway applications. Electric equipment for rolling stock Electrotechnical components. Rules for d.c. circuit-breakers |
| NF EN 61377-1 : 2006 | RAILWAY APPLICATIONS - ROLLING STOCK - PART 1: COMBINED TESTING OF INVERTER-FED ALTERNATING CURRENT MOTORS AND THEIR CONTROL |
| I.S. EN IEC 62928:2018 | RAILWAY APPLICATIONS - ROLLING STOCK - ONBOARD LITHIUM-ION TRACTION BATTERIES |
| IEC 62888-4:2018 | Railway applications - Energy measurement on board trains - Part 4: Communication |
| NF EN 61377-3 : 2003 | RAILWAY APPLICATIONS - ROLLING STOCK - PART 3: COMBINED TESTING OF ALTERNATING CURRENT MOTORS, FED BY AN INDIRECT CONVERTOR, AND THEIR CONTROL SYSTEM |
| I.S. EN 60077-4:2003 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 4: ELECTROTECHNICAL COMPONENTS - RULES FOR AC CIRCUIT-BREAKERS |
| I.S. EN 61375-3-1:2012 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-1: MULTIFUNCTION VEHICLE BUS (MVB) (IEC 61375-3-1:2012 (EQV)) |
| I.S. EN 60077-2:2017 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 2: ELECTROTECHNICAL COMPONENTS - GENERAL RULES |
| IEC 62847:2016 | Railway applications - Rolling stock - Electrical connectors - Requirements and test methods |
| IEC 60077-1:2017 | Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules |
| IEC 62888-2:2018 | Railway applications - Energy measurement on board trains - Part 2: Energy measurement |
| IEC 62498-1:2010 | Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock |
| IEC 61133 REDLINE : 3ED 2016 | RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE |
| I.S. EN 61377-2:2002 | RAILWAY APPLICATIONS - ROLLING STOCK - COMBINED TESTING - PART 2: CHOPPER-FED DIRECT CURRENT TRACTION MOTORS AND THEIR CONTROL |
| IEC 62864-1:2016 | Railway applications - Rolling stock - Power supply with onboard energy storage system - Part 1: Series hybrid system |
| EN 60077-1:2017 | Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules |
| EN 61287-1:2014/AC:2014 | RAILWAY APPLICATIONS - POWER CONVERTERS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS (IEC 61287-1:2014) |
| EN 61377-1:2006/corrigendum:2006 | RAILWAY APPLICATIONS - ROLLING STOCK - PART 1: COMBINED TESTING OF INVERTER-FED ALTERNATING CURRENT MOTORS AND THEIR CONTROL SYSTEM |
| IEC 60077-2:2017 RLV | Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules |
| IEC 60077-1:2017 RLV | Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules |
| EN 62864-1:2016 | Railway applications - Rolling stock - Power supply with onboard energy storage system - Part 1: Series hybrid system |
| EN 61375-3-2 : 2012 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-2: MVB (MULTIFUNCTION VEHICLE BUS) CONFORMANCE TESTING (IEC 61375-3-2:2012) |
| EN 61881-3:2012/A1:2013 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS (IEC 61881-3:2012/A1:2013) |
| EN 61377-2:2002 | Railway applications - Rolling stock - Combined testing - Part 2: Chopper-fed direct current traction motors and their control |
| EN 61377-3:2002 | Railway applications - Rolling stock - Part 3: Combined testing of alternating current motors, fed by an indirect convertor, and their control system |
| EN 61375-3-1 : 2012 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-1: MULTIFUNCTION VEHICLE BUS (MVB) (IEC 61375-3-1:2012) |
| IEC 62279:2015 | Railway applications - Communication, signalling and processing systems - Software for railway control and protection systems |
| IEC 61287-1:2014 | Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods |
| IEC 61373:2010 | Railway applications - Rolling stock equipment - Shock and vibration tests |
| IEC 61249-2-7:2002 | Materials for printed boards and other interconnecting structures - Part 2-7: Reinforced base materials clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad |
| IEC 60850:2014 | Railway applications - Supply voltages of traction systems |
| IEC 60352-1:1997 | Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
| IEC 61124:2012 | Reliability testing - Compliance tests for constant failure rate and constant failure intensity |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 62278:2002 | Railway applications - Specification and demonstration of reliability, availability, maintainability and safety (RAMS) |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 62236-3-2:2008 | Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
| ISO 9001:2015 | Quality management systems — Requirements |
| IEC 60352-2:2006+AMD1:2013 CSV | Solderless connections - Part 2: Crimped connections - Generalrequirements, test methods and practical guidance |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| IEC 61249-2-22:2005 | Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad |
| IEC 62498-1:2010 | Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock |
| IEC 60300-3-5:2001 | Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
£253.29
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English - French
PDF - English - French
PDF 3 Users - English - French
PDF 5 Users - English - French
PDF 9 Users - English - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.