IEC 60584-1:2013
Current
The latest, up-to-date edition.
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English - French
28-08-2013
IEC 60584-1:2013 specifies reference functions and tolerances for letter-designated thermocouples (Types R, S, B, J, T, E, K, N, C and A). Temperatures are expressed in degrees Celsius based on the International Temperature Scale of 1990, ITS-90 (symbol t90), and the EMF (symbol E) is in microvolts. The reference functions are polynomials which express the EMF, E in V, as a function of temperature t90 in °C with the thermocouple reference junctions at 0 °C. Values of EMF at intervals of 1 °C are tabulated in Annex A. This third edition cancels and replaces the second edition published in 1995 and constitutes a technical revision. It includes the following changes:
- IEC 60584-1:1995 and IEC 60584-2:1982 have been merged;
- the standard is now explicitly based on the reference polynomials which express thermocouple EMF as functions of temperature. The tables derived from the polynomials are given in Annex A;
- inverse polynomials expressing temperature as functions of EMF are given in Annex B, but inverse tables are not given;
- the range of the polynomial relating the EMF of Type K thermocouples is restricted to 1 300 °C;
- values of the Seebeck coefficients are given at intervals of 10 °C;
- thermoelectric data (EMF and Seebeck coefficients) are given at the fixed points of the ITS-90;
- some guidance is given in Annex C regarding the upper temperature limits and environmental conditions of use for each thermocouple type.
DevelopmentNote |
Supersedes IEC 60584-2. (11/2015) Stability date: 2018. (10/2017)
|
DocumentType |
Standard
|
Pages |
136
|
PublisherName |
International Electrotechnical Committee
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NF EN 60584-1 : 2014 | Identical |
NEN EN IEC 60584-1 : 2013 | Identical |
IS 16923 : Part 1 : 2018 | Identical |
EN 60584-1:2013 | Identical |
UNE-EN 60584-1:2013 | Identical |
BS EN 60584-1:2013 | Identical |
I.S. EN 60584-1:2013 | Identical |
SN EN 60584-1 : 1995 | Identical |
SAC GB/T 16839.1 : 1997 | Identical |
UNE 20679-1:1985 | Identical |
NEN 10584-1 : 1995 | Identical |
DIN IEC 60584-1:1984-01 | Identical |
I.S. EN 61515:2016 | MINERAL INSULATED METAL-SHEATHED THERMOCOUPLE CABLES AND THERMOCOUPLES |
ISO 10054:1998 | Internal combustion compression-ignition engines Measurement apparatus for smoke from engines operating under steady-state conditions Filter-type smokemeter |
ISO 834-10:2014 | Fire resistance tests Elements of building construction Part 10: Specific requirements to determine the contribution of applied fire protection materials to structural steel elements |
IEC 60695-11-2 : 3.0 | FIRE HAZARD TESTING - PART 11-2: TEST FLAMES - 1 KW NOMINAL PRE-MIXED FLAME - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE |
13/30273419 DC : 0 | BS 6387 - TEST METHOD FOR RESISTANCE TO FIRE OF CABLES REQUIRED TO MAINTAIN CIRCUIT INTEGRITY UNDER FIRE CONDITIONS |
UNE-EN 50200:2016 | Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
12/30212247 DC : 0 | BS ISO 14574 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF TENSILE PROPERTIES |
DIN EN 60695-2-1-1 : 1997 | PRUEFUNGEN ZUR BEURTEILUNG DER BRANDGEFAHR - PRUEFVERFAHREN - PRUEFUNGEN MIT DEM GLUEHDRAHT AM ENDERZEUGNIS UND ANLEITUNG |
I.S. EN 1892:2005 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF TENSILE PROPERTIES |
17/30347199 DC : 0 | BS EN ISO 204 - METALLIC MATERIALS - UNIAXIAL CREEP TESTING IN TENSION - METHOD OF TEST |
00/121016 DC : DRAFT FEB 2000 | ISO/DIS 17562 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR LINEAR THERMAL EXPANSION OF MONOLITHIC CERAMICS BY PUSH ROD TECHNIQUE |
BS EN 60695-11-3:2012 | Fire hazard testing Test flames. 500 W flames. Apparatus and confirmational test methods |
DIN EN 13381-8:2013-08 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 8: APPLIED REACTIVE PROTECTION TO STEEL MEMBERS |
DD ENV 13381-4:2002 | Test methods for determining the contribution to the fire resistance of structural members Applied protection to steel members |
13/30279522 DC : 0 | BS EN 60335-2-6/ED 6 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-6: PARTICULAR REQUIREMENTS FOR STATIONARY COOKING RANGES, HOBS, OVENS AND SIMILAR APPLIANCES |
BS EN 60068-3-7:2002 | Environmental testing. Guidance Measurements in temperature chambers for tests A and B (with load) |
12/30242502 DC : DRAFT MAR 2012 | BS ISO 16525-3 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 3: DETERMINATION OF HEAT TRANSFER PROPERTIES |
12/30258984 DC : 0 | BS ISO 834-10 - FIRE RESISTANCE TESTS - ELEMENTS OF BUILDING CONSTRUCTION - PART 10: SPECIFIC REQUIREMENTS TO DETERMINE THE CONTRIBUTION OF APPLIED FIRE PROTECTION MATERIALS TO STRUCTURAL ELEMENTS |
I.S. EN 15157:2006 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF FATIGUE PROPERTIES AT CONSTANT AMPLITUDE |
DIN 4102-15:1990-05 | FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - 'BRANDSCHACHT' |
ISO 16525-3:2014 | Adhesives Test methods for isotropic electrically conductive adhesives Part 3: Determination of heat-transfer properties |
17/30301534 DC : DRAFT AUG 2017 | BS ISO 19604 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE - DETERMINATION OF STRESS-RUPTURE TIME DIAGRAM UNDER CONSTANT TENSILE LOADING |
15/30291038 DC : 0 | BS ISO 19291 - TESTING OF LUBRICANTS - TRIBOLOGICAL TEST IN THE TRANSLATORY OSCILLATION APPARATUS - DETERMINATION OF TRIBOLOGICAL QUANTITIES FOR OILS AND GREASES IN THE TRANSLATORY OSCILLATION APPARATUS |
UNI EN 820-4 : 2009 | ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 4: DETERMINATION OF FLEXURAL CREEP DEFORMATION AT ELEVATED TEMPERATURES |
I.S. EN 12101-2:2017 | SMOKE AND HEAT CONTROL SYSTEMS - PART 2: NATURAL SMOKE AND HEAT EXHAUST VENTILATORS |
I.S. EN ISO 6942:2002 | PROTECTIVE CLOTHING - PROTECTION AGAINST HEAT AND FIRE - METHOD OF TEST: EVALUATION OF MATERIALS AND MATERIAL ASSEMBLIES WHEN EXPOSED TO A SOURCE OF RADIANT HEAT |
BS EN 820-4:2009 | Advanced technical ceramics. Thermomechanical properties of monolithic ceramics Determination of flexural creep deformation at elevated temperatures |
I.S. EN 1159-1:2003 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - THERMO-PHYSICAL PROPERTIES - PART 2: DETERMINATION OF THERMAL DIFFUSIVITY |
13/30255566 DC : 0 | BS ISO 17139 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - CERAMIC COMPOSITES - THERMOPHYSICAL PROPERTIES - DETERMINATION OF THERMAL EXPANSION |
17/30355816 DC : 0 | BS EN 60335-2-12 AMD.2 ED.5.0 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES |
10/30197234 DC : 0 | BS ISO 28703 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR THERMAL SHOCK RESISTANCE OF POROUS CERAMICS |
DIN EN 13381-9 E : 2015 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 9: APPLIED FIRE PROTECTION SYSTEMS TO STEEL BEAMS WITH WEB OPENINGS |
BS EN 13381-8:2013 | Test methods for determining the contribution to the fire resistance of structural members Applied reactive protection to steel members |
BS EN 60068-3-6:2002 | Environmental testing. Guidance Confirmation of the performance of temperature/humidity chambers |
BS ISO 20032:2013 | Method for evaluation of tensile properties of metallic superplastic materials |
PD IEC/TS 62282-7-2:2014 | Fuel cell technologies Test methods. Single cell and stack performance tests for solid oxide fuel cells (SOFC) |
BS EN 61804-2:2007 | Function blocks (FB) for process control Specification of FB concept and electronic device description language (EDDL) |
DIN EN ISO 9239-1:2010-11 | Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010) |
NF EN 60695-11-3 : 2013 | FIRE HAZARD TESTING - PART 11-3: TEST FLAMES - 500 W FLAMES - APPARATUS AND CONFIRMATIONAL TEST METHODS |
ISO 1217:2009 | Displacement compressors Acceptance tests |
16/30312501 DC : 0 | BS ISO 19618 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MEASUREMENT METHOD FOR NORMAL SPECTRAL EMISSIVITY USING BLACKBODY REFERENCE WITH AN FTIR SPECTROMETER |
06/30149459 DC : DRAFT JUN 2006 | IEC 60331-13 - TESTS FOR ELECTRIC CABLES UNDER FIRE CONDITIONS - CIRCUIT INTEGRITY - PART 13: APPARATUS - FIRE WITH SHOCK AT A TEMPERATURE OF AT LEAST 830 DEGREE C FOR CABLES WITH AN OVERALL DIAMETER NOT EXCEEDING 20MM |
08/30166841 DC : DRAFT MAR 2008 | BS EN 13381-8 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 8: APPLIED REACTIVE PROTECTION TO STEEL MEMBERS |
11/30249223 DC : 0 | BS EN 50570 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS |
BS EN 60335-2-6:2015 | Household and similar electrical appliances. Safety Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances |
17/30348655 DC : 0 | BS EN ISO 20238 - CONVEYOR BELTS - DRUM FRICTION TESTING |
BS EN 13381-9:2015 | Test methods for determining the contribution to the fire resistance of structural members Applied fire protection systems to steel beams with web openings |
BS ISO 28703:2011 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for thermal-shock resistance of porous ceramics |
16/30301537 DC : 0 | BS ISO 19628 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - THERMOPHYSICAL PROPERTIES OF CERAMIC COMPOSITES - DETERMINATION OF SPECIFIC HEAT CAPACITY |
BS ISO 19628:2017 | Fine ceramics (advanced ceramics, advanced technical ceramics). Thermophysical properties of ceramic composites. Determination of specific heat capacity |
09/30171916 DC : DRAFT JAN 2009 | BS EN ISO 9239-1 - REACTION TO FIRE TESTS FOR FLOORINGS - PART 1: DETERMINATION OF THE BURNING BEHAVIOUR USING A RADIANT HEAT SOURCE |
BS EN 60695-2-1-0 : 1997 | FIRE HAZARD TESTING - TEST METHODS - GLOW-WIRE TEST METHODS - GENERAL |
DD IEC/TS 60695-11-3:2004 | Fire hazard testing Test flames. 500 W flames. Apparatus and confirmational test methods |
ISO 834-1:1999 | Fire-resistance tests Elements of building construction Part 1: General requirements |
BS EN 60584-1:2013 | Thermocouples EMF specifications and tolerances |
PREN 1554 : DRAFT 2011 | CONVEYOR BELTS - DRUM FRICTION TESTING |
BS EN 61515:1996 | Mineral insulated thermocouple cables and thermocouples |
CEI EN 60068-3-7 : 2002 | ENVIRONMENTAL TESTING - PART 3-7: SUPPORTING DOCUMENTATION AND GUIDANCE MEASUREMENTS IN TEMPERATURE CHAMBERS FOR TEST A AND B (WITH LOAD) |
I.S. EN ISO 14544:2016 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE - DETERMINATION OF COMPRESSION PROPERTIES (ISO 14544:2013) |
BS ISO 17493:2016 | Clothing and equipment for protection against heat. Test method for convective heat resistance using a hot air circulating oven |
BS EN 50446:2006 | Straight thermocouple assembly with metal or ceramic protection tube and accessories |
ISO 204:2009 | Metallic materials Uniaxial creep testing in tension Method of test |
IEC 61804-2:2018 | Function blocks (FB) for process control and electronic device description language (EDDL) - Part 2: Specification of FB concept |
ENV 13381-4:2002 | Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied protection to steel members |
BS EN 50570:2013 | Household and similar electrical appliances. Safety. Particular requirements for commercial electric tumble dryers |
BIS IS 11000-2-1 : 2008(R2015) | FIRE HAZARD TESTING - PART 2: TEST METHODS - SECTION 1: GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE |
CEN/TR 16988:2016 | Estimation of uncertainty in the single burning item test |
I.S. EN 60269-1:2007 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS |
I.S. EN 50570:2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS |
CEI EN 61515 : 1997 | MINERAL INSULATED METAL-SHEATHED THERMOCOUPLE CABLES AND THERMOCOUPLES |
CSA E60335-2-11:13 (R2019) | Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers (Adopted IEC 60335-2-11:2008 + A1:2012, edition 7:2008 consolidated with amendment 1:2012, with Canadian deviations) | Appareils électrodomestiques et analogues - Sécurité - Partie 2-11: Règles particulières pour les sèche-linge à tambour. (norme CEI 60335- 2-11:2008 + A1:2012 adoptée, édition 7:2008 consolidée par l\'amendement 1:2012, avec exigences propres au Canada) |
BS EN 60531:2000 | Household electric thermal storage room heaters. Methods for measuring performance |
ISO 19467:2017 | Thermal performance of windows and doors — Determination of solar heat gain coefficient using solar simulator |
AAMI ST15883-1 : 2009 : INC : AMD 1 : 2014 : R201400 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
ISO 19291:2016 | Lubricants — Determination of tribological quantities for oils and greases — Tribological test in the translatory oscillation apparatus |
UNI EN 1047-2 : 2013 | SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 2: DATA ROOMS AND DATA CONTAINER |
CEI EN 60584-3 : 2009 | THERMOCOUPLES - PART 3: EXTENSION AND COMPENSATING CABLES - TOLERANCES AND IDENTIFICATION SYSTEMS |
I.S. EN 60695-2-10:2013 | FIRE HAZARD TESTING - PART 2-10: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE (IEC 60695-2-10:2013 (EQV)) |
UNI EN 15659 : 2009 | SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - LIGHT FIRE STORAGE UNITS |
17/30363956 DC : 0 | BS EN 419 - GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
S.R. CEN/TS 15658:2007 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC FIBRES AT HIGH TEMPERATURE UNDER NON-REACTIVE ENVIRONMENT - DETERMINATION OF CREEP BEHAVIOUR BY THE HOT END METHOD |
UNI EN 13381-8 : 2013 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 8: APPLIED REACTIVE PROTECTION TO STEEL MEMBERS |
NF EN 1366-9 : 2009 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 9: SINGLE COMPARTMENT SMOKE EXTRACTION DUCTS |
NF EN 60695-11-4 : 2012 | FIRE HAZARD TESTING - PART 11-4: TEST FLAMES - 50 W FLAMES - APPARATUS AND CONFIRMATIONAL TEST METHODS |
I.S. EN 50200:2015 | METHOD OF TEST FOR RESISTANCE TO FIRE OF UNPROTECTED SMALL CABLES FOR USE IN EMERGENCY CIRCUITS |
I.S. HD 605:2008 | ELECTRIC CABLES - ADDITIONAL TEST METHODS |
ISO 12567-1:2010 | Thermal performance of windows and doors Determination of thermal transmittance by the hot-box method Part 1: Complete windows and doors |
IEC 60335-2-37:2017 | Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric doughnut fryers and deep fat fryers |
EN 285:2015 | Sterilization - Steam sterilizers - Large sterilizers |
I.S. EN 1047-1:2005 | SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 1: DATA CABINETS AND DISKETTE INSERTS |
DIN EN ISO 12567-1:2010-12 | Thermal performance of windows and doors - Determination of thermal transmittance by the hot-box method - Part 1: Complete windows and doors (ISO 12567-1:2010) |
DIN EN 12881-1 E : 2015 | CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 1: PROPANE BURNER TESTS |
DIN EN 13235:2007-01 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF CREEP BEHAVIOUR |
BS EN 12599:2012 | Ventilation for buildings. Test procedures and measurement methods to hand over air conditioning and ventilation systems |
DIN EN 15335 E : 2007 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - DETERMINATION OF ELASTIC PROPERTIES BY RESONANT BEAM METHOD UP TO 2000 DEGREE C |
BS EN 12952-15:2003 | Water-tube boilers and auxiliary installations Acceptance tests |
BS EN 61558-1 : 2005 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
BS EN 12789:2002 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure. Determination of flexural strength |
BS EN 12101-2:2017 | Smoke and heat control systems Natural smoke and heat exhaust ventilators |
BS EN 15157:2006 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of fatigue properties at constant amplitude |
BS EN 15335:2007 | Advanced technical ceramics. Ceramic composites. Determination of elastic properties by resonant beam method up to 2000°C |
BS EN 12291:2003 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of compression properties |
ISO 6942:2002 | Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat |
I.S. EN ISO 9239-1:2010 | REACTION TO FIRE TESTS FOR FLOORINGS - PART 1: DETERMINATION OF THE BURNING BEHAVIOUR USING A RADIANT HEAT SOURCE |
EN 60269-1:2007/A2:2014 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS (IEC 60269-1:2006/A2:2014) |
EN 12669:2000 | DIRECT GAS-FIRED HOT AIR BLOWERS FOR USE IN GREENHOUSES AND SUPPLEMENTARY NON-DOMESTIC SPACE HEATING |
IEC 60068-3-5:2018 RLV | Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers |
EN 1159-1:2003 | Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1: Determination of thermal expansion |
EN 61234-2:1998 | Electrical insulating materials - Methods of test for the hydrolytic stability - Part 2: Moulded thermosets |
EN 1159-2:2003 | Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 2: Determination of thermal diffusivity |
EN 61558-1:2005/A1:2009 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
EN 60695-2-1-0 : 1996 | FIRE HAZARD TESTING - TEST METHODS - GLOW-WIRE TEST METHODS - GENERAL |
EN 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
EN 1047-1:2005 | Secure storage units - Classification and methods of test for resistance to fire - Part 1: Data cabinets and diskette inserts |
EN 12881-2:2005+A1:2008 | Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test |
IEC 60331-3:2018 RLV | Tests for electric cables under fire conditions - Circuit integrity - Part 3: Test method for fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure |
EN 12290:2005 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties |
EN 12953-11:2003 | Shell boilers - Part 11: Acceptance tests |
IEC 60068-3-6:2018 RLV | Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/ humidity chambers |
EN 30-1-1:2008+A3:2013 | Domestic cooking appliances burning gas - Part 1-1: Safety - General |
CEN/TS 1007-7:2006 | Advanced technical ceramics - Ceramic composites. Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature |
EN 1007-7:2010 | Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature |
EN 1007-6:2007 | Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature |
EN 10319-1:2003 | Metallic materials - Tensile stress relaxation testing - Part 1: Procedure for testing machines |
EN 60695-11-4 : 2011 | FIRE HAZARD TESTING - PART 11-4: TEST FLAMES - 50 W FLAME - APPARATUS AND CONFIRMATIONAL TEST METHOD (IEC 60695-11-4:2011) |
NF EN 285 : 2016 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
CEN/TS 15866:2009 | Advanced technical ceramics - Ceramic composites - Determination of the thermal diffusivity of ceramic fibres |
EN 12599:2012 | Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems |
I.S. EN 1159-3:2003 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES, THERMOPHYSICAL PROPERTIES - PART 3: DETERMINATION OF SPECIFIC HEAT CAPACITY |
EN 60068-3-6:2002 | Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers |
EN 60584-2:1993 | Thermocouples - Part 2: Tolerances |
CEN/TS 15658:2007 | Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature under non-reactive environment - Determination of creep behaviour by the hot end method |
EN IEC 61804-2:2018 | Function blocks (FB) for process control and electronic device description language (EDDL) - Part 2: Specification of FB concept |
EN 13381-8:2013 | Test methods for determining the contribution to the fire resistance of structural members - Part 8: Applied reactive protection to steel members |
EN 1319:2009 | Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW |
EN 62460:2008 | Temperature - Electromotive force (EMF) tables for pure-element thermocouple combinations |
EN 820-5:2009 | Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures |
EN 60584-3:2008 | Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system |
EN 12881-1:2014 | Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests |
EN 13235:2006 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of creep behaviour |
EN 12101-2:2017 | Smoke and heat control systems - Part 2: Natural smoke and heat exhaust ventilators |
EN 12789:2002 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength |
EN ISO 14544:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of compression properties (ISO 14544:2013) |
NF EN 1159-2 : 2004 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - THERMOPHYSICAL PROPERTIES - PART 2: DETERMINATION OF THERMAL DIFFUSIVITY |
BS EN 1007-7:2010 | Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature |
ISO 21927-2:2006 | Smoke and heat control systems Part 2: Specification for natural smoke and heat exhaust ventilators |
PREN 416 : DRAFT 2017 | GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
DIN EN 15181:2015-03 (Draft) | MEASURING METHOD OF THE ENERGY CONSUMPTION OF GAS FIRED OVENS |
BS EN 16442:2015 | Controlled environment storage cabinet for processed thermolabile endoscopes |
I.S. EN ISO 13123:2011 | METALLIC AND OTHER INORGANIC COATINGS - TEST METHOD OF CYCLIC HEATING FOR THERMAL-BARRIER COATINGS UNDER TEMPERATURE GRADIENT (ISO 13123:2011) |
BS ISO 17142 : 2014 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF FATIGUE PROPERTIES AT CONSTANT AMPLITUDE |
16/30339586 DC : 0 | BS EN 60068-3-6 - ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS |
BS ISO 14544 : 2013 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE - DETERMINATION OF COMPRESSION PROPERTIES |
99/124125 DC : DRAFT NOV 1999 | BS EN ISO 15883-1 - WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, DEFINITIONS AND TESTS |
I.S. EN 1894:2005 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF SHEAR STRENGTH BY COMPRESSION LOADING OF NOTCHED SPECIMENS |
I.S. EN 1007-6:2007 | ADVANCED TECHNICAL CERAMIC - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 6: DETERMINATION OF TENSILE PROPERTIES OF FILAMENTS AT HIGH TEMPERATURE |
CEI EN 60695-11-3 : 2013 | FIRE HAZARD TESTING - PART 11-3: TEST FLAMES - 500 W FLAMES - APPARATUS AND CONFIRMATIONAL TEST METHODS |
11/30227614 DC : 0 | BS EN ISO 13078 - DENTISTRY - DENTAL FURNACE - TEST METHOD FOR TEMPERATURE MEASUREMENT WITH SEPARATE THERMOCOUPLE |
PREN 17175 : DRAFT 2017 | GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
CEI EN 60531 : 2001 | HOUSEHOLD ELECTRIC THERMAL STORAGE ROOM HEATERS METHODS FOR MEASURING PERFORMANCE |
UNI EN ISO 13123 : 2012 | METALLIC AND OTHER INORGANIC COATINGS - TEST METHOD OF CYCLIC HEATING FOR THERMAL-BARRIER COATINGS UNDER TEMPERATURE GRADIENT |
DIN EN 1366-9:2008-08 | Fire resistance tests for service installations - Part 9: Single compartment smoke extraction ducts |
13/30267504 DC : 0 | BS EN 61482-1-2 ED 2.0 - LIVE WORKING - PROTECTIVE CLOTHING AGAINST THE THERMAL HAZARDS OF AN ELECTRIC ARC - PART 1-2: TEST METHODS - METHOD 2: DETERMINATION OF ARC PROTECTION CLASS OF MATERIAL AND CLOTHING BY USING A CONSTRAINED AND DIRECTED ARC (BOX TEST) |
DIN EN 50446:2007-04 | STRAIGHT THERMOCOUPLE ASSEMBLY WITH METAL OR CERAMIC PROTECTION TUBE AND ACCESSORIES |
BS EN ISO 17142:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of fatigue properties at constant amplitude |
HD 605 S2:2008/corrigendum:2010 | ELECTRIC CABLES - ADDITIONAL TEST METHODS |
IEC 60331-3:2009 | Tests for electric cables under fire conditions - Circuit integrity - Part 3: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure |
DKD-R 5-6 : 2008 | |
BS EN ISO 14544:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at high temperature. Determination of compression properties |
BS EN ISO 14574:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at high temperature. Determination of tensile properties |
BS ISO 17095:2013 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for interfacial bond strength of ceramic materials at elevated temperatures |
08/30168462 DC : DRAFT APR 2008 | BS ISO 1217 - DISPLACEMENT COMPRESSORS - ACCEPTANCE TEST |
ISO 17493:2016 | Clothing and equipment for protection against heat Test method for convective heat resistance using a hot air circulating oven |
BS ISO 10054:1998 | Internal combustion compression-ignition engines. Measurement apparatus for smoke from engines operating under steady-state conditions. Filter type smokemeter |
17/30319129 DC : DRAFT APR 2017 | BS ISO 9869-2 - THERMAL INSULATION - BUILDING ELEMENTS - IN-SITU MEASUREMENT OF THERMAL RESISTANCE AND THERMAL TRANSMITTANCE - PART 2: INFRARED METHOD FOR FRAME STRUCTURE DWELLING |
17/30352977 DC : 0 | BS ISO 15029-2 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF SPRAY IGNITION CHARACTERISTICS OF FIRE-RESISTANT FLUIDS - PART 2: SPRAY TEST - STABILIZED FLAME HEAT RELEASE METHOD |
07/30170559 DC : DRAFT AUG 2007 | BS ISO 2314 - GAS TURBINES - ACCEPTANCE TESTS |
PREN 12599 : DRAFT 2010 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
DD ENV 12923-2:2001 | Advanced technical ceramics. Monolithic ceramics Oxidation test |
DIN EN ISO 204 E : 2009 | METALLIC MATERIALS - UNIAXIAL CREEP TESTING IN TENSION - METHOD OF TEST |
NF EN 16442 : 2015 | CONTROLLED ENVIRONMENT STORAGE CABINET FOR PROCESSED THERMOLABILE ENDOSCOPES |
BS EN 60269-1 : 2007 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS |
CSA E61558.1:2012 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
NF EN 60584-3 : 2008 | THERMOCOUPLES - PART 3: EXTENSION AND COMPENSATING CABLES - TOLERANCES AND IDENTIFICATION SYSTEM |
CAN/CSA-E61558-1:12 (R2017) | Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests (Adopted IEC 61558- 1:1997 + A1:1998, edition 2.1, 2009-04 with Canadian deviations) | Sécurité des transformateurs, alimentations, bobines d\'inductance et produits analogues - Partie 1: Exigences générales et essais (norme CEI 61558-1:1997 + A1:1998 adoptée, édition 2.1, 2009-04 avec exigences propres au Canada) |
I.S. EN ISO 204:2009 | METALLIC MATERIALS - UNIAXIAL CREEP TESTING IN TENSION - METHOD OF TEST |
I.S. EN 820-4:2009 | ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 4: DETERMINATION OF FLEXURAL CREEP DEFORMATION AT ELEVATED TEMPERATURES |
IEC 60331-3 REDLINE : 2ED 2018 | TESTS FOR ELECTRIC CABLES UNDER FIRE CONDITIONS - CIRCUIT INTEGRITY - PART 3: TEST METHOD FOR FIRE WITH SHOCK AT A TEMPERATURE OF AT LEAST 830 DEGREES C FOR CABLES OF RATED VOLTAGE UP TO AND INCLUDING 0,6/1,0 KV TESTED IN A METAL ENCLOSURE |
UNE-EN 50193-1:2016 | Electric instantaneous water heaters - Methods for measuring the Performance - Part 1: General requirements |
I.S. EN 60068-3-5:2002 | ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
I.S. EN 60531:2000 | HOUSEHOLD ELECTRIC THERMAL STORAGE ROOM HEATERS - METHODS FOR MEASURING PERFORMANCE |
CEI EN 61804-2 : 2008 | FUNCTION BLOCKS (FB) FOR PROCESS CONTROL - PART 2: SPECIFICATION OF FB CONCEPT |
I.S. EN 1007-7:2010 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 7: DETERMINATION OF THE DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT HIGH TEMPERATURE |
I.S. EN IEC 60068-3-5:2018 | ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
ISO 19628:2017 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Thermophysical properties of ceramic composites — Determination of specific heat capacity |
I.S. EN 60068-3-6:2002 | ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS |
PREN 30-1-1 : DRAFT 2017 | DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL |
EN IEC 60068-3-6:2018/AC:2018-05 | ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS (IEC 60068-3-6:2018) |
I.S. EN 60695-11-2:2017 | FIRE HAZARD TESTING - PART 11-2: TEST FLAMES - 1 KW NOMINAL PRE-MIXED FLAME - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE |
CEI EN 50570 : 2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS |
I.S. EN 60335-2-6:2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-6: PARTICULAR REQUIREMENTS FOR STATIONARY COOKING RANGES, HOBS, OVENS AND SIMILAR APPLIANCES |
S.R. CEN/TR 16988:2016 | ESTIMATION OF UNCERTAINTY IN THE SINGLE BURNING ITEM TEST |
ANSI/AAMI ST15883-1:2009(R2014) &A1:2014&A2:2012 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
NF EN ISO 14544 : 2016 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH - DETERMINATION OF COMPRESSION PROPERTIES |
ISO 17095:2013 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for interfacial bond strength of ceramic materials at elevated temperatures |
UNE-EN 50399:2012 | Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results |
IEC 60335-2-6:2014 | Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances |
UNE-EN 15181:2017 | Measuring method of the energy consumption of gas fired ovens |
IEC 60335-2-9:2008+AMD1:2012+AMD2:2016 CSV | Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances |
IEC 60068-3-5 REDLINE : 2.0 | ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
BS EN ISO 9151:2016 | Protective clothing against heat and flame. Determination of heat transmission on exposure to flame |
I.S. EN 60335-2- 11:2010&A11:2012&A1:2015&A2:2018 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-11: PARTICULAR REQUIREMENTS FOR TUMBLE DRYERS |
ASTM E 2714 : 2013 : REDLINE | Standard Test Method for Creep-Fatigue Testing |
I.S. EN 16442:2015 | CONTROLLED ENVIRONMENT STORAGE CABINET FOR PROCESSED THERMOLABILE ENDOSCOPES |
UNI EN 1366-9 : 2008 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 9: SINGLE COMPARTMENT SMOKE EXTRACTION DUCTS |
NF EN 820-4 : 2009 | ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 4: DETERMINATION OF FLEXURAL CREEP DEFORMATION AT ELEVATED TEMPERATURES |
CSA C22.2 No. 60335-2-9 : 2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-9: PARTICULAR REQUIREMENTS FOR GRILLS, TOASTERS AND SIMILAR PORTABLE COOKING APPLIANCES |
S.R. CEN/TS 45545-2:2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
IEC 60737:2010 | Nuclear power plants - Instrumentation important to safety - Temperature sensors (in-core and primary coolant circuit) - Characteristics and test methods |
IEC 60331-12:2002 | Tests for electric cables under fire conditions - Circuit integrity - Part 12: Apparatus - Fire with shock at a temperature of at least 830 °C |
DIN EN 12953-11:2003-12 | SHELL BOILERS - PART 11: ACCEPTANCE TESTS |
DIN EN 1007-6:2008-02 | Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature |
DIN EN 10319-2:2007-01 | Metallic materials - Tensile stress relaxation testing - Part 2: Procedure for bolted joint models |
DIN EN 1020:2010-05 | NON-DOMESTIC FORCED CONVECTION GAS-FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS |
DIN EN 12788:2005-11 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength |
DIN EN 1319:2010-06 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW |
DIN EN 1554:2012-10 | CONVEYOR BELTS - DRUM FRICTION TESTING |
DIN EN 15758 E : 2010 | CONSERVATION OF CULTURAL PROPERTY - PROCEDURES AND INSTRUMENTS FOR MEASURING TEMPERATURES OF THE AIR AND THE SURFACES OF OBJECTS |
DIN EN 1159-3:2008-06 | Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity (includes Corrigendum AC:2008) |
DIN EN 12881-1:2015-10 | Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests |
DIN EN 1159-1 E : 2007 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - THERMOPHYSICAL PROPERTIES - PART 1: DETERMINATION OF THERMAL EXPANSION |
DIN EN 15758:2010-12 | Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and of the surfaces of objects |
BS EN 1007-6:2007 | Advanced technical ceramic. Ceramic composites. Methods of test for reinforcements Determination of tensile properties of filaments at high temperature |
BS EN 1554:2012 | Conveyor belts. Drum friction testing |
UNE-EN 1458-1:2012 | Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 1: Safety |
BS EN 820-3:2004 | Advanced technical ceramics. Monolithic ceramics. Thermomechanical properties Determination of resistance to thermal shock by water quenching |
IEC 60335-2-12:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances |
ISO 17142:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics) Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure Determination of fatigue properties at constant amplitude |
UNE-EN 12881-1:2014 | Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests |
BS EN 12881-1:2014 | Conveyor belts. Fire simulation flammability testing Propane burner tests |
I.S. EN 1366-1:2014 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS |
EN 1366-1:2014 | Fire resistance tests for service installations - Part 1: Ventilation ducts |
I.S. EN 30-1-1:2008 | DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL |
DIN EN 1893:2005-07 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPER TIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF TENSILE PROPERTIES |
DIN EN 12290:2005-09 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF COMPRESSION PROPERTIES |
I.S. EN 12669:2000 | DIRECT GAS-FIRED HOT AIR BLOWERS FOR USE IN GREENHOUSES AND SUPPLEMENTARY NON-DOMESTIC SPACE HEATING |
DIN EN 1363-1:2012-10 | FIRE RESISTANCE TESTS - PART 1: GENERAL REQUIREMENTS |
I.S. EN 12599:2012 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
DIN EN 1366-1:2014-12 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS |
I.S. EN ISO 4892-1:2016 | PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016) |
I.S. EN 12881-1:2014 | CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 1: PROPANE BURNER TESTS |
EN 1159-3:2003/AC:2008 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES, THERMOPHYSICAL PROPERTIES - PART 3: DETERMINATION OF SPECIFIC HEAT CAPACITY |
I.S. EN 12881-2:2005 | CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 2: LARGE SCALE FIRE TEST |
I.S. EN 1458-1:2011 | DOMESTIC DIRECT GAS-FIRED TUMBLE DRYERS OF TYPES B22D AND B23D, OF NOMINAL HEAT INPUT NOT EXCEEDING 6 KW - PART 1: SAFETY |
DIN EN 1894:2005-07 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens; German version EN 1894:2005 |
VDE 0471-2-1-0 : 1997 | FIRE HAZARD TESTING - PART 2: TEST METHODS; SECTION 1/SHEET 0: GLOW-WIRE TEST METHODS; GENERAL |
NBR IEC 60695-2-10 : 2015 | FIRE HAZARD TESTING - PART 2-10: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE |
VDE 0349-2 : 1998 | METHOD OF TEST FOR THE HYDROLYTIC STABILITY - MOULDED THERMOSETS |
VDE 0349-1 : 1994 | METHOD OF TEST FOR THE HYDROLYTIC STABILITY OF ELECTRICAL INSULATING MATERIALS - PLASTIC FILMS |
VDI 3460 Blatt 1:2014-02 | Emission control - Thermal waste treatment - Fundamentals |
NF EN ISO 6942 : 2002 | PROTECTIVE CLOTHING - PROTECTION AGAINST HEAT AND FIRE - METHOD OF TEST: EVALUATION OF MATERIALS AND MATERIAL ASSEMBLIES WHEN EXPOSED TO A SOURCE OF RADIANT HEAT |
VDE 0471-2-1-1 : 1997 | FIRE HAZARD TESTING - PART 2: TEST METHODS; SECTION 1/SHEET 1: GLOW-WIRE END-PRODUCT TEST AND GUIDANCE |
BS 1041-4:1992 | Temperature measurement Guide to the selection and use of thermocouples |
BS 1902-4.5(2000) : 2000 | METHODS OF TESTING DENSE SHAPED REFRACTORY PRODUCTS - DETERMINATION OF MODULUS OF RUPTURE AT ELEVATED TEMPERATURES |
DIN EN 61234-1 : 1994 | METHOD OF TEST FOR THE HYDROLYTIC STABILITY OF ELECTRICAL INSULATING MATERIALS - PART 1: PLASTIC FILMS |
DIN EN 61234-2 : 1998 | ELECTRICAL INSULATING MATERIALS - METHOD OF TEST FOR THE HYDROLYTIC STABILITY - PART 2: MOULDED THERMOSETS |
BS 6387:2013 | Test method for resistance to fire of cables required to maintain circuit integrity under fire conditions |
BS ISO 20343:2017 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining elastic modulus of thick ceramic coatings at elevated temperature |
06/30129315 DC : DRAFT FEB 2006 | ISO 20032 - METHOD FOR EVALUATION OF TENSILE PROPERTIES OF METALLIC SUPER PLASTIC MATERIALS |
ISO 17565:2003 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for flexural strength of monolithic ceramics at elevated temperature |
IEC 60335-2-36:2017 | Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements |
CEI EN 50362 : 2003 | METHOD OF TEST FOR RESISTANCE TO FIRE OF LARGER UNPROTECTED POWER AND CONTROL CABLES FOR USE IN EMERGENCY CIRCUITS |
CEI EN 60068-3-5 : 2002 | ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
12/30248648 DC : DRAFT AUG 2012 | BS EN 16442 - CONTROLLED ENVIRONMENT STORAGE CABINET FOR DISINFECTED THERMOLABILE ENDOSCOPES |
I.S. EN 285:2015 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
BS ISO 19467:2017 | Thermal performance of windows and doors. Determination of solar heat gain coefficient using solar simulator |
BS EN 60695-11-4:2011 | Fire hazard testing Test flames. 50 W flame. Apparatus and confirmational test method |
10/30216687 DC : 0 | BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
I.S. EN 12290:2005 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE DETERMINATION OF COMPRESSION PROPERTIES |
I.S. EN 12788:2005 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF FLEXURAL STRENGTH |
02/540530 DC : DRAFT OCT 2003 | BS 7346-6 - COMPONENTS FOR SMOKE AND HEAT CONTROL SYSTEMS - PART 6: CABLE SYSTEMS |
BS ISO 19291:2016 | Lubricants. Determination of tribological quantities for oils and greases. Tribological test in the translatory oscillation apparatus |
CEI EN 50571 : 2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC WASHING MACHINES |
BS EN 16733:2016 | Reaction to fire tests for building products. Determination of a building product\'s propensity to undergo continuous smouldering |
BS IEC 60737:2010 | Nuclear power plants. Instrumentation important to safety Temperature sensors (in-core and primary coolant circuit). Characteristics and test methods |
PREN 13381-10 : DRAFT 2016 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 10: APPLIED PROTECTION TO SOLID STEEL BAR IN TENSION |
PD CEN/TR 16988:2016 | Estimation of uncertainty in the single burning item test |
CEI EN 60068-3-6 : 2002 | ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS |
12/30255557 DC : 0 | BS ISO 17095 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR INTERFACIAL BOND STRENGTH OF CERAMIC MATERIALS AT ELEVATED TEMPERATURES |
ISO 20509:2003 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of oxidation resistance of non-oxide monolithic ceramics |
BS EN 62460:2008 | Temperature. Electromotive force (EMF) tables for pure-element thermocouple combinations |
BS EN 60584-3:2008 | Thermocouples Extension and compensating cables. Tolerances and identification system |
BS EN 50200:2015 | Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
17/30301540 DC : 0 | BS ISO 19629 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - THERMOPHYSICAL PROPERTIES OF CERAMIC COMPOSITES - DETERMINATION OF UNIDIMENSIONAL THERMAL DIFFUSIVITY BY FLASH METHOD |
DIN EN 1007-7:2010-12 | Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature |
DIN EN ISO 13078:2013-05 | Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple (ISO 13078:2013) |
BS 7575:1992 | Specification for resistance thermometers and thermocouples for the measurement of temperature in tanks containing refrigerated light hydrocarbon fluids |
I.S. EN 50399:2011 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - TEST APPARATUS, PROCEDURES, RESULTS |
DIN EN 16733:2016-07 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - DETERMINATION OF A BUILDING PRODUCT'S PROPENSITY TO UNDERGO CONTINUOUS SMOULDERING |
12/30259188 DC : 0 | BS EN 12881-1 - CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 1: PROPANE BURNER TESTS |
10/30238800 DC : 0 | BS EN 60335-2-6 ED.6.0 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-6: PARTICULAR REQUIREMENTS FOR STATIONARY COOKING RANGES, HOBS, OVENS AND SIMILAR APPLIANCES |
EN IEC 60068-3-5:2018 | Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers |
DIN EN 16442 E : 2015 | CONTROLLED ENVIRONMENT STORAGE CABINET FOR PROCESSED THERMOLABILE ENDOSCOPES |
NF ISO 14661 : 2000 AMD 1 2004 | THERMAL TURBINES FOR INDUSTRIAL APPLICATIONS (STEAM TURBINES, GAS EXPANSION TURBINES) - GENERAL REQUIREMENTS |
BS EN 50193-1:2013 | Electric instantaneous water heaters General requirements |
18/30344905 DC : DRAFT FEB 2018 | BS ISO 17492 - CLOTHING FOR PROTECTION AGAINST HEAT AND FLAME - DETERMINATION OF HEAT TRANSMISSION ON EXPOSURE TO BOTH FLAME AND RADIANT HEAT |
BS EN 820-5:2009 | Advanced technical ceramics. Thermomechanical properties of monolithic ceramics Determination of elastic moduli at elevated temperatures |
17/30363842 DC : 0 | BS ISO 21927-2 - SMOKE AND HEAT CONTROL SYSTEMS - PART 2: SPECIFICATION FOR NATURAL SMOKE AND HEAT EXHAUST VENTILATORS |
IEC 60695-11-2:2017 RLV | Fire hazard testing - Part 11-2: Test flames - 1 kW pre-mixed flame - Apparatus, confirmatory test arrangement and guidance |
17/30363953 DC : 0 | BS EN 416 - GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
BS EN 50571:2013 | Household and similar electrical appliances. Safety. Particular requirements for commercial electric washing machines |
12/30249755 DC : DRAFT JULY 2012 | BS EN 50193-1 - ELECTRIC INSTANTANEOUS WATER HEATERS - GENERAL REQUIREMENTS |
13/30255572 DC : 0 | BS ISO 17142 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF FATIGUE PROPERTIES AT CONSTANT AMPLITUDE |
I.S. EN 50571:2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC WASHING MACHINES |
BS EN 61234-2:1998 | Method of test for hydrolytic stability of electrical insulating materials Moulded thermosets |
17/30348325 DC : 0 | BS ISO 18894 - COKE - DETERMINATION OF COKE REACTIVITY INDEX (CRI) AND COKE STRENGTH AFTER REACTION (CSR) |
13/30273151 DC : 0 | BS EN ISO 9151 - PROTECTIVE CLOTHING AGAINST HEAT AND FLAME - DETERMINATION OF HEAT TRANSMISSION ON EXPOSURE TO FLAME |
BS ISO 834-10:2014 | Fire resistance tests. Elements of building construction Specific requirements to determine the contribution of applied fire protection materials to structural steel elements |
09/30165791 DC : 0 | BS IEC 60737 - NUCLEAR POWER PLANT - INSTRUMENTATION IMPORTANT TO SAFETY - TEMPERATURE SENSORS (INCORE AND PRIMARY COOLANT CIRCUIT): CHARACTERISTICS AND TEST METHODS |
10/30235574 DC : 0 | BS EN 12599 - VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
12/30247440 DC : 0 | BS ISO 16835 - REFRACTORY PRODUCTS - DETERMINATION OF THERMAL EXPANSION |
06/30144382 DC : DRAFT JAN 2006 | IEC 60331-12 - TESTS FOR ELECTRIC CABLES UNDER FIRE CONDITIONS - CIRCUIT INTEGRITY - PART 12: APPARATUS - FIRE WITH SHOCK AT A FLAME TEMPERATURE OF AT LEAST 830 DEGREE C |
07/30162155 DC : 0 | EN 15659 - SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - LIGHT FIRE STORAGE UNITS |
17/30352625 DC : DRAFT SEP 2017 | BS IEC 62282-8-101 ED1.0 - FUEL CELL TECHNOLOGIES - PART 8-101: ENERGY STORAGE SYSTEMS USING FUEL CELL MODULES IN REVERSE MODE - TEST PROCEDURES FOR SOLID OXIDE SINGLE CELL AND STACK PERFORMANCE INCLUDING REVERSING OPERATION |
UNE-EN 13381-4:2014 | Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied passive protection to steel members |
09/30195952 DC : 0 | BS ISO 12567-1 - THERMAL PERFORMANCE OF WINDOWS AND DOORS - DETERMINATION OF THERMAL TRANSMITTANCE BY HOT-BOX METHOD - PART 1: COMPLETE WINDOWS AND DOORS |
16/30333511 DC : 0 | BS EN 50193-1 - ELECTRIC INSTANTANEOUS WATER HEATERS - METHODS FOR MEASURING THE PERFORMANCE - PART 1: GENERAL REQUIREMENTS |
09/30210744 DC : 0 | BS EN 15365 - ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC FIBRES AT HIGH TEMPERATURE IN A NON-REACTIVE ENVIRONMENT - DETERMINATION OF CREEP BEHAVIOUR BY THE COLD END METHOD |
NF EN ISO 14574 : 2016 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE - DETERMINATION OF TENSILE PROPERTIES |
CEI EN 60695-11-2 : 2014 | FIRE HAZARD TESTING - PART 11-2: TEST FLAMES - 1 KW NOMINAL PRE-MIXED FLAME - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE |
16/30342023 DC : 0 | BS EN 60331-1 - TESTS FOR ELECTRIC CABLES UNDER FIRE CONDITIONS - CIRCUIT INTEGRITY - PART 1: TEST METHOD FOR FIRE WITH SHOCK AT A TEMPERATURE OF AT LEAST 830 DEGREES C FOR CABLES OF RATED VOLTAGE UP TO AND INCLUDING 0,6/1,0 KV AND WITH AN OVERALL DIAMETER EXCEEDING 20 MM |
IEC 60331-2 REDLINE : 2ED 2018 | TESTS FOR ELECTRIC CABLES UNDER FIRE CONDITIONS - CIRCUIT INTEGRITY - PART 2: TEST METHOD FOR FIRE WITH SHOCK AT A TEMPERATURE OF AT LEAST 830 DEGREES C FOR CABLES OF RATED VOLTAGE UP TO AND INCLUDING 0,6/1,0 KV AND WITH AN OVERALL DIAMETER NOT EXCEEDING 20MM |
IEC 60068-3-5:2018 | Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers |
PREN 50570 : DRAFT 2011 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS |
BS EN 60335-2-11:2010+A2:2018 | Household and similar electrical appliances. Safety Particular requirements for tumble dryers |
IEC 60335-2-69:2016 RLV | Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use |
BS ISO 1217 : 2009 | DISPLACEMENT COMPRESSORS - ACCEPTANCE TESTS |
15/30325369 DC : 0 | BS EN 484 - SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - INDEPENDENT STOVES, INCLUDING THOSE INCORPORATING A GRILL FOR OUTDOOR USE |
NF EN 60269-1 : 2007 AMD 2 2014 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS |
CSA E60335.2.6 : 2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-6: PARTICULAR REQUIREMENTS FOR STATIONARY COOKING RANGES, HOBS, OVENS AND SIMILAR APPLIANCES |
ISO 16835:2014 | Refractory products Determination of thermal expansion |
NF EN ISO 13123 : 2012 | METALLIC AND OTHER INORGANIC COATINGS - TEST METHOD OF CYCLIC HEATING FOR THERMAL-BARRIER COATINGS UNDER TEMPERATURE GRADIENT |
BS EN 50399:2011 | Common test methods for cables under fire conditions. Heat release and smoke production measurement on cables during flame spread test. Test apparatus, procedures, results |
I.S. EN 10319-2:2006 | METALLIC MATERIALS - TENSILE STRESS RELAXATION TESTING - PART 2: PROCEDURE FOR BOLTED JOINT MODELS |
ISO 17139:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics) Thermophysical properties of ceramic composites Determination of thermal expansion |
PD ISO/TS 15029-2:2012 | Petroleum and related products. Determination of spray ignition characteristics of fire-resistant fluids Spray test. Stabilized flame heat release method |
IEC 60331-2:2009 | Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm |
I.S. EN 13381-9:2015 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 9: APPLIED FIRE PROTECTION SYSTEMS TO STEEL BEAMS WITH WEB OPENINGS |
I.S. EN ISO 12567-1:2010 | THERMAL PERFORMANCE OF WINDOWS AND DOORS - DETERMINATION OF THERMAL TRANSMITTANCE BY THE HOT-BOX METHOD - PART 1: COMPLETE WINDOWS AND DOORS |
AAMI ST15883-1 : 2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
NF EN 60068-3-5 : 2002 | ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
CEI EN 62460 : 2009 | TEMPERATURE - ELECTROMOTIVE FORCE (EMF) TABLES FOR PURE-ELEMENT THERMOCOUPLE COMBINATIONS |
IEC 61558-1:2017 | Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests |
I.S. CEN TS 15365:2006 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC FIBRES AT HIGH TEMPERATURE IN A NON-REACTIVE ENVIRONMENT - DETERMINATION OF CREEP BEHAVIOUR BY THE COLD END METHOD |
I.S. EN 61189-3:2008 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 3: TEST METHODS FOR INTERCONNECTION STRUCTURES (PRINTED BOARDS) |
IEC 60331-1:2009 | Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm |
IEC 60335-2-69:2016 | Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use |
IEC 60331-11:1999+AMD1:2009 CSV | Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C |
DIN EN 10319-1:2003-09 | METALLIC MATERIALS - TENSILE STRESS RELAXATION TESTING - PART 1: PROCEDURE FOR TESTING MACHINES |
DIN EN 12881-2 E : 2009 | CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 2: LARGE SCALE FIRE TEST |
DIN EN 285:2016-05 | Sterilization - Steam sterilizers - Large sterilizers |
IEC 60335-2-2:2009+AMD1:2012+AMD2:2016 CSV | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-2: PARTICULAR REQUIREMENTS FOR VACUUM CLEANERS AND WATER-SUCTION CLEANING APPLIANCES |
BS EN 820-1:2002 | Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties Determination of flexural strength at elevated temperatures |
ISO 13123:2011 | Metallic and other inorganic coatings — Test method of cyclic heating for thermal-barrier coatings under temperature gradient |
IEC 60335-2-50:2002+AMD1:2007+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-50: Particular requirements for commercial electric bains-marie |
BS EN 10319-1:2003 | Metallic materials. Tensile stress relaxation testing Procedure for testing machines |
ISO 14544:2013 | Fine ceramics (advanced ceramics, advanced technical ceramics) Mechanical properties of ceramic composites at high temperature Determination of compression properties |
BS EN 1892:2005 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of tensile properties |
BS EN 367:1992 | Protective clothing. Protection against heat and fire. Method for determining heat transmission on exposure to flame |
DIN EN 12881-2:2009-10 | Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test (includes Amendment A1:2009) |
BS EN 1020:2009 | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
ISO 15883-1:2006 | Washer-disinfectors Part 1: General requirements, terms and definitions and tests |
IEC 60335-2-48:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters |
IEC 60068-3-7:2001 | Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load) |
UNI EN 1366-1 : 2014 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS |
EN 13823:2010+A1:2014 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
I.S. EN 1319:2009 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW |
EN ISO 12567-1:2010/AC:2010 | Thermal performance of windows and doors - Determination of thermal transmittance by the hot-box method - Part 1: Complete windows and doors - Technical Corrigendum 1 (ISO 12567-1:2010/Cor 1:2010) |
I.S. EN 13823:2010 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
I.S. EN 621:2009 | NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
UNI EN 13823 : 2014 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
I.S. EN 1020:2009 | NON-DOMESTIC FORCED CONVECTION GAS-FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS |
I.S. EN ISO 15883-1:2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006) |
EN ISO 14574:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of tensile properties (ISO 14574:2013) |
UNI EN 12599 : 2012 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
UNI EN ISO 12567-1 : 2010 | THERMAL PERFORMANCE OF WINDOWS AND DOORS - DETERMINATION OF THERMAL TRANSMITTANCE BY THE HOT-BOX METHOD - PART 1: COMPLETE WINDOWS AND DOORS |
UNI EN 12881-1 : 2014 | CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 1: PROPANE BURNER TESTS |
UNI EN 1458-1 : 2012 | DOMESTIC DIRECT GAS-FIRED TUMBLE DRYERS OF TYPES B22D AND B23D, OF NOMINAL HEAT INPUT NOT EXCEEDING 6 KW - PART 1: SAFETY |
UNI EN 12881-2 : 2008 | CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 2: LARGE SCALE FIRE TEST |
UNI EN ISO 15883-1 : 2014 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
EN 820-4:2009 | Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 4: Determination of flexural creep deformation at elevated temperatures |
UNI EN 1020 : 2009 | NON-DOMESTIC FORCED CONVECTION GAS- FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS |
EN 13381-6:2012 | Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns |
UNI EN ISO 13078 : 2013 | DENTISTRY - DENTAL FURNACE - TEST METHOD FOR TEMPERATURE MEASUREMENT WITH SEPARATE THERMOCOUPLE |
UNI EN 1319 : 2010 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN- ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW |
UNI EN 621 : 2010 | NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
UNI EN ISO 9239-1 : 2010 | REACTION TO FIRE TESTS FOR FLOORINGS - PART 1: DETERMINATION OF THE BURNING BEHAVIOUR USING A RADIANT HEAT SOURCE |
UNI EN 1554 : 2012 | CONVEYOR BELTS - DRUM FRICTION TESTING |
BS IEC 62651:2013 | Nuclear power plants. Instrumentation important to safety.Thermocouples: characteristics and test methods |
UNI EN 1159-3 : 2003 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES, THERMOPHYSICAL PROPERTIES - DETERMINATION OF SPECIFIC HEAT CAPACITY |
DIN 18230-2:1999-01 | STRUCTURAL FIRE PROTECTION IN INDUSTRIAL BUILDINGS - PART 2: DETERMINATION OF COMBUSTION BEHAVIOUR OF MATERIALS IN STORAGE ARRANGEMENT - COMBUSTION FACTOR M |
DIN EN ISO 14544 E : 2016 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE - DETERMINATION OF COMPRESSION PROPERTIES (ISO 14544:2013) |
DIN EN ISO 9151 E : 2017 | PROTECTIVE CLOTHING AGAINST HEAT AND FLAME - DETERMINATION OF HEAT TRANSMISSION ON EXPOSURE TO FLAME (ISO 9151:2016, CORRECTED VERSION 2017-04-01) |
DIN EN 15181 E : 2009 | MEASURING METHOD OF THE ENERGY CONSUMPTION OF GAS FIRED OVENS |
DIN EN ISO 14544:2016-10 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE - DETERMINATION OF COMPRESSION PROPERTIES (ISO 14544:2013) |
08/30173520 DC : DRAFT FEB 2008 | BS EN 15758 - CONSERVATION OF CULTURAL PROPERTY - PROCEDURES AND INSTRUMENTS FOR MEASURING TEMPERATURES OF THE AIR AND THE SURFACES OF OBJECTS |
11/30247234 DC : 0 | BS EN 62651 - NUCLEAR POWER PLANTS - INSTRUMENTATION IMPORTANT TO SAFETY - THERMOCOUPLES - CHARACTERISTICS AND TEST METHODS |
PREN 484 : DRAFT 2015 | SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - INDEPENDENT STOVES, INCLUDING THOSE INCORPORATING A GRILL FOR OUTDOOR USE |
PREN 17180 : DRAFT 2017 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE VAPORIZED HYDROGEN PEROXIDE STERILIZERS - REQUIREMENTS AND TESTING |
I.S. EN ISO 9151:2016 | PROTECTIVE CLOTHING AGAINST HEAT AND FLAME - DETERMINATION OF HEAT TRANSMISSION ON EXPOSURE TO FLAME |
I.S. EN IEC 60068-3-6:2018 COR 2018 | ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS (IEC 60068-3-6:2018) |
BS EN 13381-6:2012 | Test methods for determining the contribution to the fire resistance of structural members Applied protection to concrete filled hollow steel columns |
15/30267680 DC : 0 | BS ISO 17493 - CLOTHING AND EQUIPMENT FOR PROTECTION AGAINST HEAT - TEST METHOD FOR CONVECTIVE HEAT RESISTANCE USING A HOT AIR CIRCULATING OVEN |
13/30267104 DC : 0 | BS EN 13381-9 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 9: APPLIED FIRE PROTECTION SYSTEMS TO STEEL BEAMS WITH WEB OPENINGS |
PREN 50193-1 : DRAFT 2016 | ELECTRIC INSTANTANEOUS WATER HEATERS - METHODS FOR MEASURING THE PERFORMANCE - PART 1: GENERAL REQUIREMENTS |
BS EN ISO 13078:2013 | Dentistry. Dental furnace. Test method for temperature measurement with separate thermocouple |
BS EN ISO 13123:2011 | Metallic and other inorganic Coatings. Test method of cyclic heating for thermal barrier coatings under temperature gradient |
UNI EN 13381-4 : 2013 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PASSIVE PROTECTION TO STEEL MEMBERS |
I.S. EN 13235:2006 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF CREEP BEHAVIOUR |
I.S. EN 820-3:2004 | ADVANCED TECHNICAL CERAMICS - METHODS OF TESTING MONOLITHIC CERAMICS - THERMOMECHANICAL PROPERTIES - PART 3: DETERMINATION OF RESISTANCE TO THERMAL SHOCK BY WATER QUENCHING |
08/30189150 DC : 0 | BS EN 13381-4 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PASSIVE PROTECTION PRODUCTS TO STEEL MEMBERS |
DIN EN 60584-3:2008-08 | Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system (IEC 60584-3:2007); German version EN 60584-3:2008 |
DIN 43735:2011-06 | PROCESS CONTROL TECHNOLOGY - ELECTRICAL TEMPERATURE SENSORS - REPLACEABLE INSERTS FOR RTDS AND THERMOCOUPLES |
12/30261347 DC : 0 | BS EN 50582 - METHOD OF TEST FOR RESISTANCE TO FIRE OF UNPROTECTED OPTICAL FIBRE CABLES FOR USE IN EMERGENCY CIRCUITS (DIAMETER LESS THAN OR EQUAL TO 20 MM) |
DIN EN 820-5:2009-10 | ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 5: DETERMINATION OF ELASTIC MODULI AT ELEVATED TEMPERATURES |
09/30210248 DC : 0 | BS EN 1007-7 - ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 7: DETERMINATION OF THE DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT HIGH TEMPERATURE |
15/30315787 DC : 0 | BS ISO 17562 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR LINEAR THERMAL EXPANSION OF MONOLITHIC CERAMICS BY PUSH-ROD TECHNIQUE |
DIN EN ISO 1893:2008-09 | REFRACTORY PRODUCTS - DETERMINATION OF REFRACTORINESS UNDER LOAD - DIFFERENTIAL METHOD WITH RISING TEMPERATURE |
BS ISO 17139:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics). Thermophysical properties of ceramic composites. Determination of thermal expansion |
98/201085 DC : DRAFT MARCH 1998 | PREN 50296 - HOUSEHOLD ELECTRIC THERMAL STORAGE ROOM HEATERS - METHODS FOR MEASURING PERFORMANCE |
11/30238482 DC : 0 | BS EN 1458-1 - DOMESTIC DIRECT GAS-FIRED TUMBLE DRYERS OF TYPES B22D AND B23D, OF NOMINAL HEAT INPUT NOT EXCEEDING 6 KW - PART 1: SAFETY |
IEC 60531:1999 | Household electric thermal storage room heaters - Methods for measuring performance |
14/30312597 DC : 0 | BS EN 62828-3 ED.1 IEC 62828-3 ED.1 - REFERENCE CONDITIONS AND PROCEDURES FOR TESTING INDUSTRIAL MEASUREMENT TRANSMITTERS - PART 3: SPECIFIC PROCEDURES FOR TEMPERATURE TRANSMITTERS |
DIN EN 13381-6:2012-09 | Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns |
ISO 20343:2017 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for determining elastic modulus of thick ceramic coatings at elevated temperature |
PREN 419 : DRAFT 2017 | GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS FOR NONDOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
UNI EN 1007-7 : 2010 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 7: DETERMINATION OF THE DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT HIGH TEMPERATURE |
DIN EN 13381-9:2015-09 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 9: APPLIED FIRE PROTECTION SYSTEMS TO STEEL BEAMS WITH WEB OPENINGS |
DIN EN 13381-4:2013-08 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PASSIVE PROTECTION TO STEEL MEMBERS |
I.S. EN 60695-11-4:2011 | FIRE HAZARD TESTING - PART 11-4: TEST FLAMES - 50 W FLAME - APPARATUS AND CONFIRMATIONAL TEST METHOD (IEC 60695-11-4:2011) |
BS ISO 14574 : 2013 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE - DETERMINATION OF TENSILE PROPERTIES |
16/30320658 DC : 0 | BS ISO 20343 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR DETERMINING ELASTIC MODULUS OF THICK CERAMIC COATING AT ELEVATED TEMPERATURE |
BS ISO 19604:2018 | Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at high temperature. Determination of stress-rupture time diagram under constant tensile loading |
BS EN 13381-4:2013 | Test methods for determining the contribution to the fire resistance of structural members Applied passive protection products to steel members |
UNI CEI CEN/TS 45545-2 : 2009 | RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
03/308231 DC : 0 | EN 50399-1 - COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - PART 1: APPARATUS |
I.S. EN 1366-9:2008 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 9: SINGLE COMPARTMENT SMOKE EXTRACTION DUCTS |
DIN EN 820-4:2013-01 | ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 4: DETERMINATION OF FLEXURAL CREEP DEFORMATION AT ELEVATED TEMPERATURES |
BS EN 60584-2:1993 | Thermocouples Tolerances |
UNI EN 1007-6 : 2008 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 6: DETERMINATION OF TENSILE PROPERTIES OF FILAMENTS AT HIGH TEMPERATURE |
BS EN 61234-1:1994 | Method of test for hydrolytic stability of electrical insulating materials Method of test for hydrolytic stability of electrical insulating materials. Plastic films |
DD CEN/TS 15866:2009 | Advanced technical ceramics. Ceramic composites. Determination of the thermal diffusivity of ceramic fibres |
09/30206605 DC : 0 | BS EN 60695-2-10 ED.2 - FIRE HAZARD TESTING - PART 2-10: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE |
BS EN 60068-3-5:2002 | Environmental testing. Guidance Confirmation of the performance of temperature chambers |
DD ENV 820-4:2002 | Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties Determination of flexural creep deformation at elevated temperatures |
DIN EN ISO 13123:2012-04 | Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient (ISO 13123:2011) |
DIN EN 16442:2015-05 | CONTROLLED ENVIRONMENT STORAGE CABINET FOR PROCESSED THERMOLABILE ENDOSCOPES |
I.S. EN 61234-1:1995 | METHOD OF TEST FOR THE HYDROLYTIC STABILITY OF ELECTRICAL INSULATING MATERIALS - PART 1: PLASTIC FILMS |
BIS IS 5623 : 2012(R2017) | GLASS - DETERMINATION OF COEFFICIENT OF MEAN LINEAR THERMAL EXPANSION |
15/30330287 DC : DRAFT AUG 2015 | BS EN 60068-3-5 - ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
UNE-EN 60695-11-4:2012 | Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method |
DD CEN/TS 45545-2:2009 | Railway applications. Fire protection on railway vehicles Requirements for fire behaviour of materials and components |
DIN EN 15659 E : 2009 | SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - LIGHT FIRE STORAGE UNITS |
I.S. EN ISO 14574:2016 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE - DETERMINATION OF TENSILE PROPERTIES (ISO 14574:2013) |
BS ISO 21927-2 : 2006 | SMOKE AND HEAT CONTROL SYSTEMS - PART 2: SPECIFICATION FOR NATURAL SMOKE AND HEAT EXHAUST VENTILATORS |
I.S. EN 60584-3:2008 | THERMOCOUPLES - PART 3: EXTENSION AND COMPENSATING CABLES - TOLERANCES AND IDENTIFICATION SYSTEM |
I.S. EN IEC 61804-2:2018 | FUNCTION BLOCKS (FB) FOR PROCESS CONTROL AND ELECTRONIC DEVICE DESCRIPTION LANGUAGE (EDDL) - PART 2: SPECIFICATION OF FB CONCEPT |
I.S. EN 15659:2009 | SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - LIGHT FIRE STORAGE UNITS |
I.S. EN 13381-8:2013 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 8: APPLIED REACTIVE PROTECTION TO STEEL MEMBERS |
UNE-EN 16442:2015 | Controlled environment storage cabinet for processed thermolabile endoscopes |
UNE-EN 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
S.R. CEN/TS 15866:2009 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - DETERMINATION OF THE THERMAL DIFFUSIVITY OF CERAMIC FIBRES |
ISO 28703:2011 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for thermal-shock resistance of porous ceramics |
I.S. EN ISO 17142:2016 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF FATIGUE PROPERTIES AT CONSTANT AMPLITUDE (ISO 17142:2014) |
I.S. ENV 13381-4:2002 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PROTECTION TO STEEL MEMBERS |
I.S. EN 61069-2:2016 | INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 2: ASSESSMENT METHODOLOGY |
I.S. EN 60695-11-3:2012 | FIRE HAZARD TESTING - PART 11-3: TEST FLAMES - 500 W FLAMES - APPARATUS AND CONFIRMATIONAL TEST METHODS (IEC 60695-11-3:2012 (EQV)) |
ISO/TS 15029-2:2012 | Petroleum and related products Determination of spray ignition characteristics of fire-resistant fluids Part 2: Spray test Stabilized flame heat release method |
16/30324101 DC : 0 | BS EN 13381-10 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 10: APPLIED PROTECTION TO SOLID STEEL BAR IN TENSION |
ISO 18894:2018 | Coke — Determination of coke reactivity index (CRI) and coke strength after reaction (CSR) |
17/30332894 DC : 0 | BS EN 17082 - DOMESTIC AND NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW |
UNE-EN ISO 204:2010 | Metallic materials - Uniaxial creep testing in tension - Method of test (ISO 204:2009) |
BIS IS 1528-18 : 1993(R2004) | METHODS OF SAMPLING AND PHYSICAL TESTS FOR REFRACTORY MATERIALS - PART 18: DETERMINATION OF CREEP IN COMPRESSION |
17/30363959 DC : 0 | BS EN 17175 - GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
IEC 60068-3-6 REDLINE : 2.0 | ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS |
ISO 20032:2013 | Method for evaluation of tensile properties of metallic superplastic materials |
BS EN 1047-2 : 2009 | SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 2: DATA ROOMS AND DATA CONTAINER |
EN 1047-2:2009+A1:2013 | Secure storage units - Classification and methods of test for resistance to fire - Part 2: Data rooms and data container |
DIN EN 1047-2:2013-05 | SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 2: DATA ROOMS AND DATA CONTAINER |
IEC 62651:2013 | Nuclear power plants - Instrumentation important to safety - Thermocouples: characteristics and test methods |
IEC 60335-2-39:2012+AMD1:2017 CSV | Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans |
IEC 60068-3-6:2018 | Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/ humidity chambers |
IEC TS 60695-11-3:2004 | Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods |
ISO 17562:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for linear thermal expansion of monolithic ceramics by push-rod technique |
ISO 9151:2016 | Protective clothing against heat and flame Determination of heat transmission on exposure to flame |
I.S. EN 62460:2008 | TEMPERATURE - ELECTROMOTIVE FORCE (EMF) TABLES FOR PURE-ELEMENT THERMOCOUPLE COMBINATIONS |
DIN EN 13823:2015-02 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
IEC 61558-1 REDLINE : 3ED 2017 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 1: GENERAL REQUIREMENTS AND TESTS |
UNE-EN ISO 15883-1:2009 | Washer-disinfectors - Part 1: General requirements, terms and definitions and tests (ISO 15883-1:2006) |
BS EN 13823:2010+A1:2014 | Reaction to fire tests for building products. Building products excluding floorings exposed to the thermal attack by a single burning item |
DIN EN 12599:2013-01 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
DIN EN 1047-1:2006-01 | SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 1: DATA CABINETS AND DISKETTE INSERTS |
DIN EN ISO 4892-1:2016-10 | PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016) |
UNE-EN 1554:2012 | Conveyor belts - Drum friction testing |
BS EN 13235:2006 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of creep behaviour |
IEC 60695-11-3:2012 | Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods |
ISO 4892-1:2016 | Plastics Methods of exposure to laboratory light sources Part 1: General guidance |
BS EN 621:2009 | Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products |
IEC 61069-2:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 2: Assessment methodology |
IEC 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
13/30276640 DC : 0 | BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY |
BS EN 12788:2005 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of flexural strength |
IEC 60695-11-4:2011 | Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method |
BS EN 1893:2005 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of tensile properties |
DIN EN 1159-3 E : 2008 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES, THERMOPHYSICAL PROPERTIES - PART 3: DETERMINATION OF SPECIFIC HEAT CAPACITY |
IEC 60335-2-47:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans |
BS EN 993-19:2004 | Methods of test for dense shaped refractory products Determination of thermal expansion by a differential method |
BS EN 1366-1:2014 | Fire resistance tests for service installations Ventilation ducts |
UNI EN 1363-1 : 2012 | FIRE RESISTANCE TESTS - PART 1: GENERAL REQUIREMENTS |
BS EN 820-2:2003 | Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties Determination of self-loaded deformation |
BS EN 62282-4-101:2014 | Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks |
BS EN ISO 4892-1:2016 | Plastics. Methods of exposure to laboratory light sources General guidance |
BS EN ISO 12567-1:2010 | Thermal performance of windows and doors. Determination of thermal transmittance by the hot-box method Complete windows and doors |
IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV | Low-voltage fuses - Part 1: General requirements |
UNE-EN 1366-1:2016 | Fire resistance tests for service installations - Part 1: Ventilation ducts |
BS EN 1363-1:2012 | Fire resistance tests General requirements |
IEC 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
IEC 60335-2-42:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens |
UNE-EN 1020:2010 | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
IEC 62460:2008 | Temperature - Electromotive force (EMF) tables for pure-element thermocouple combinations |
ISO 14574:2013 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of tensile properties |
15/30328159 DC : 0 | BS EN 61558-1 - SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
IEC 60335-2-52:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances |
BS EN 285:2015 | Sterilization. Steam sterilizers. Large sterilizers |
IEC 60335-2-49:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm |
BS EN 10319-2:2006 | Metallic materials. Tensile stress relaxation testing Procedure for bolted joint models |
IEC 61234-1:1994 | Method of test for the hydrolytic stability of electrical insulating materials - Part 1: Plastic films |
UNE-EN 12101-2:2004 | Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators |
UNE-EN 15659:2010 | Secure storage units - Classification and methods of test for resistance to fire - Light fire storage units |
UNE-EN 30-1-1:2009 | Domestic cooking appliances burning gas - Part 1-1: Safety - General |
IEC 60335-2-38:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-38: Particular requirements for commercial electric griddles and griddle grills |
UNE-EN 50571:2014 | Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines |
EN 15181:2017 | Measuring method of the energy consumption of gas fired ovens |
DIN EN 12952-15:2004-01 | Water tube boilers and auxiliary installations - Part 15: Acceptance tests; German version EN 12952-15:2003 |
BS EN 10291:2000 | Metallic materials. Uniaxial creep testing in tension. Methods of test |
UNE-EN 15758:2011 | Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects |
BS EN ISO 15883-1 : 2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006) |
BS EN 15758:2010 | Conservation of cultural property. Procedures and instruments for measuring temperatures of the air and the surfaces of objects |
UNE-EN 50570:2014 | Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers |
BS EN 15158:2006 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of fatigue properties at constant amplitude |
DIN EN 1159-1:2007-11 | Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1: Determination of thermal expansion (includes Corrigendum AC:2007) |
IEC 60584-3:2007 | Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system |
IEC 61189-3:2007 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards) |
UNE-EN ISO 4892-1:2017 | Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016) |
ISO 13078:2013 | Dentistry — Dental furnace — Test method for temperature measurement with separate thermocouple |
IEC 60335-2-11:2008+AMD1:2012+AMD2:2015 CSV | Household and similar electrical appliances - Safety - Part 2-11:Particular requirements for tumble dryers |
EN 61515:2016 | Mineral insulated metal-sheathed thermocouple cables and thermocouples |
EN ISO 4892-1:2016 | Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016) |
EN ISO 17142:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude (ISO 17142:2014) |
EN 1893:2005 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of tensile properties |
EN 1458-1:2011 | Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 1: Safety |
EN 820-2:2003 | Advanced technical ceramics - Methods of testing monolithic ceramics - Thermo-mechanical properties - Part 2: Determination of self-loaded deformation |
EN 15335:2007 | Advanced technical ceramics - Ceramic composites - Determination of elastic properties by resonant beam method up to 2 000 °C |
EN 621:2009 | Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products |
EN ISO 13078:2013 | Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple (ISO 13078:2013) |
EN 367:1992/AC:1992 | PROTECTIVE CLOTHING - PROTECTION AGAINST HEAT AND FIRE - METHOD OF DETERMINING HEAT TRANSMISSION ON EXPOSURE TO FLAME |
EN 15158:2006 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of fatigue properties at constant amplitude |
EN ISO 9239-1:2010 | Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010) |
OVE/ONORM EN 60584-3 : 2008 | THERMOCOUPLES - PART 3: EXTENSION AND COMPENSATING CABLES - TOLERANCES AND IDENTIFICATION SYSTEM |
EN 993-19 : 2004 | METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS - PART 19: DETERMINATION OF THERMAL EXPANSION BY A DIFFERENTIAL METHOD |
EN 1554:2012 | Conveyor belts - Drum friction testing |
EN ISO 13123:2011 | Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient (ISO 13123:2011) |
EN 993-7 : 1998 | METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS - PART 7: DETERMINATION OF MODULUS OF RUPTURE AT ELEVATED TEMPERATURES |
EN 1366-9:2008 | Fire resistance tests for service installations - Part 9: Single compartment smoke extraction ducts |
EN ISO 6942:2002 | Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002) |
EN 15157:2006 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude |
EN 15659:2009 | Secure storage units - Classification and methods of test for resistance to fire - Light fire storage units |
EN 1892:2005 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of tensile properties |
EN 15758:2010 | Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects |
EN 1894:2005 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens |
EN 16733:2016 | Reaction to fire tests for building products - Determination of a building product's propensity to undergo continuous smouldering |
EN ISO 1893:2008 | Refractory products - Determination of refractoriness under load - Differential method with rising temperature (ISO 1893:2007) |
EN 820-1:2002 | Advanced technical ceramics - Methods of testing monolithic ceramics - Thermonechanical properties - Part 1: Determination of flexural strength at elevated temperatures |
EN 820-3 : 2004 | ADVANCED TECHNICAL CERAMICS - METHODS OF TESTING MONOLITHIC CERAMICS - THERMOMECHANICAL PROPERTIES - PART 3: DETERMINATION OF RESISTANCE TO THERMAL SHOCK BY WATER QUENCHING |
EN 16442:2015 | Controlled environment storage cabinet for processed thermolabile endoscopes |
DIN EN ISO 9151:2015-12 (Draft) | PROTECTIVE CLOTHING AGAINST HEAT AND FLAME - DETERMINATION OF HEAT TRANSMISSION ON EXPOSURE TO FLAME (ISO 9151:2016, CORRECTED VERSION 2017-04-01) |
BS EN ISO 1893:2008 | Refractory products. Determination of refractoriness under load. Differential method with rising temperature |
BS EN 60695-11-2:2017 | Fire hazard testing Test flames. 1 kW pre-mixed flame. Apparatus, confirmatory test arrangement and guidance |
11/30228858 DC : DRAFT JUNE 2011 | IEC 60695-6-30 TS ED 2.0 - FIRE HAZARD TESTING - PART 6-30: SMOKE OBSCURATION - SMALL SCALE STATIC METHOD - APPARATUS |
10/30216236 DC : DRAFT JAN 2010 | BS EN 60695-11-4 - FIRE HAZARD TESTING - PART 11-4: TEST FLAMES - 50 W FLAME - APPARATUS AND CONFIRMATIONAL TEST METHODS |
NF EN 50362 : 2003 | METHOD OF TEST FOR RESISTANCE TO FIRE OF LARGER UNPROTECTED POWER AND CONTROL CABLES FOR USE IN EMERGENCY CIRCUITS |
UNE-EN 60695-11-3:2013 | Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods |
DD IEC/TS 60695-11-4:2004 | Fire hazard testing Test flames. 50 W flame. Apparatus and confirmational test method |
I.S. EN 1893:2005 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF TENSILE PROPERTIES |
08/30185906 DC : 0 | BS EN 820-4 - ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 4: DETERMINATION OF FLEXURAL CREEP DEFORMATION AT ELEVATED TEMPERATURES |
DD CEN/TS 15658:2007 | Advanced technical ceramics. Mechanical properties of ceramic fibres at high temperature under non-reactive environment. Determination of creep behaviour by the hot end method |
DIN EN 16733 E : 2016 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - DETERMINATION OF A BUILDING PRODUCT'S PROPENSITY TO UNDERGO CONTINUOUS SMOULDERING |
I.S. EN 1554:2012 | CONVEYOR BELTS - DRUM FRICTION TESTING |
SAE ARP 5144 : 2017 | HEAT APPLICATION FOR THERMOSETTING RESIN CURING |
I.S. CEN TS 1007-7:2006 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES. METHODS OF TEST FOR REINFORCEMENTS - PART 7: DETERMINATION OF THE DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT HIGH TEMPERATURE |
BS EN 61189-3:2008 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies Test methods for interconnection structures (printed boards) |
I.S. EN 13381-6:2012 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 6: APPLIED PROTECTION TO CONCRETE FILLED HOLLOW STEEL COLUMNS |
I.S. EN 820-1:2002 | ADVANCED TECHNICAL CERAMICS - METHODS OF TESTING MONOLITHIC CERAMICS - THERMOMECHANICAL PROPERTIES - PART 1: DETERMINATION OF FLEXURAL STRENGTH AT ELEVATED TEMPERATURES |
BS ISO 16525-3:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives Determination of heat-transfer properties |
12/30212241 DC : 0 | BS ISO 14544 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF COMPRESSION PROPERTIES |
I.S. EN 1047-2:2009 | SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 2: DATA ROOMS AND DATA CONTAINER |
BS ISO 15029-2:2018 | Petroleum and related products. Determination of spray ignition characteristics of fire-resistant fluids Spray test. Stabilised flame heat release method |
11/30250552 DC : 0 | BS EN 1554 - CONVEYOR BELTS - DRUM FRICTION TESTING |
UNE-EN 13381-6:2014 | Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns |
03/317223 DC : DRAFT OCT 2003 | EN 10319-2 - METALLIC MATERIALS - TENSILE STRESS RELAXATION TESTING - PART 2: PROCEDURE FOR BOLTED JOINT MODELS |
I.S. EN 60584-1:2013 | THERMOCOUPLES - PART 1: EMF SPECIFICATIONS AND TOLERANCES |
IEC TS 60695-6-30:2013 | Fire hazard testing - Part 6-30: Smoke obscuration - Small-scale static method - Apparatus |
BS EN 15181:2017 | Measuring method of the energy consumption of gas fired ovens |
14/30294102 DC : 0 | BS EN 61515 ED 2.0 - MINERAL INSULATED METAL SHEATHED THERMOCOUPLE CABLES AND THERMOCOUPLES |
05/30135633 DC : DRAFT JUN 2005 | IEC 60269-1 ED 4 - LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS |
BS EN 1366-9:2008 | Fire resistance tests for service installations Single compartment smoke extraction ducts |
NF EN 62460 : 2008 | TEMPERATURE - ELECTROMOTIVE FORCE (EMF) TABLES FOR PURE-ELEMENT THERMOCOUPLE COMBINATIONS |
BS EN 60695-2-10:2013 | Fire hazard testing Glowing/hot-wire based test methods. Glow-wire apparatus and common test procedure |
04/30123974 DC : DRAFT OCT 2004 | EN 50446 - STRAIGHT THERMOCOUPLE ASSEMBLY WITH METAL OR CERAMIC PROTECTION TUBE AND ACCESSORIES |
I.S. EN ISO1893:2008 | REFRACTORY PRODUCTS - DETERMINATION OF REFRACTORINESS UNDER LOAD - DIFFERENTIAL METHOD WITH RISING TEMPERATURE |
EN 50193-1:2016 | Electric instantaneous water heaters - Methods for measuring the Performance - Part 1: General requirements |
10/30216139 DC : 0 | BS EN 60695-11-3 - FIRE HAZARD TESTING - PART 11-3: TEST FLAMES - 500 W FLAMES - APPARATUS AND CONFIRMATIONAL TEST METHODS |
EN 60335-2-6:2015 | Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances |
IEC 60335-2-69 REDLINE : 5.0 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR COMMERCIAL USE |
CEI EN 50446 : 2007 | STRAIGHT THERMOCOUPLE ASSEMBLY WITH METAL OR CERAMIC PROTECTION TUBE AND ACCESSORIES |
IEC 60331-1 REDLINE : 2ED 2018 | TESTS FOR ELECTRIC CABLES UNDER FIRE CONDITIONS - CIRCUIT INTEGRITY - PART 1: TEST METHOD FOR FIRE WITH SHOCK AT A TEMPERATURE OF AT LEAST 830 DEGREES C FOR CABLES OF RATED VOLTAGE UP TO AND INCLUDING 0,6/1,0 KV AND WITH AN OVERALL DIAMETER EXCEEDING 20 MM |
IEC TS 60695-11-4:2004 | Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method |
UNI EN 820-5 : 2009 | ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 5: DETERMINATION OF ELASTIC MODULI AT ELEVATED TEMPERATURES |
BS EN 15659:2009 | Secure storage units. Classification and methods of test for resistance to fire. Light fire storage units |
08/30185915 DC : 0 | BS EN 820-5 - ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 5: DETERMINATION OF ELASTIC MODULI AT ELEVATED TEMPERATURES |
CSA E61558.1 : 2012 : INC : UPD 1 : 2014 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
DIN EN 60695-2-1-0 : 1997 | FIRE HAZARD TESTING - PART 2: TEST METHODS; SECTION 1/SHEET 0: GLOW-WIRE TEST METHODS; GENERAL |
DIN EN 15659:2009-12 | SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - LIGHT FIRE STORAGE UNITS |
DIN VDE 0636-10 : 1992 | LOW-VOLTAGES FUSES; GENERAL REQUIREMENTS |
UNI EN ISO 1893 : 2008 | REFRACTORY PRODUCTS - DETERMINATION OF REFRACTORINESS UNDER LOAD - DIFFERENTIAL METHOD WITH RISING TEMPERATURE |
UNI EN 15758 : 2010 | CONSERVATION OF CULTURAL PROPERTY - PROCEDURES AND INSTRUMENTS FOR MEASURING TEMPERATURES OF THE AIR AND THE SURFACES OF OBJECTS |
NF ISO 1217 : 2009 AMD 1 2016 | DISPLACEMENT COMPRESSORS - ACCEPTANCE TESTS |
CEI EN 60584-1 : 2014 | THERMOCOUPLES - PART 1: EMF SPECIFICATIONS AND TOLERANCES |
IEC 61515:2016 | Mineral insulated metal-sheathed thermocouple cables and thermocouples |
UNI EN 13381-6 : 2012 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 6: APPLIED PROTECTION TO CONCRETE FILLED HOLLOW STEEL COLUMNS |
I.S. EN 13381-4:2013 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PASSIVE PROTECTION TO STEEL MEMBERS |
I.S. EN 820-5:2009 | ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 5: DETERMINATION OF ELASTIC MODULI AT ELEVATED TEMPERATURES |
I.S. EN 50193-1:2016 | ELECTRIC INSTANTANEOUS WATER HEATERS - METHODS FOR MEASURING THE PERFORMANCE - PART 1: GENERAL REQUIREMENTS |
I.S. EN ISO 13078:2013 | DENTISTRY - DENTAL FURNACE - TEST METHOD FOR TEMPERATURE MEASUREMENT WITH SEPARATE THERMOCOUPLE (ISO 13078:2013) |
I.S. EN 61804-2:2007 | FUNCTION BLOCKS (FB) FOR PROCESS CONTROL - PART 2: SPECIFICATION OF FB CONCEPT |
I.S. EN 16733:2016 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - DETERMINATION OF A BUILDING PRODUCT'S PROPENSITY TO UNDERGO CONTINUOUS SMOULDERING |
I.S. EN 50446:2006 | STRAIGHT THERMOCOUPLE ASSEMBLY WITH METAL OR CERAMIC PROTECTION TUBE AND ACCESSORIES |
ISO 15029-2:2018 | Petroleum and related products — Determination of spray ignition characteristics of fire-resistant fluids — Part 2: Spray test — Stabilised flame heat release method |
BS EN ISO 204:2009 | Metallic materials. Uniaxial creep testing in tension. Method of test |
ISO 19604:2018 | Fine ceramics (advanced ceramics, advanced technical ceramics) Mechanical properties of ceramic composites at high temperature Determination of stress-rupture time diagram under constant tensile loading |
UNI EN ISO 204 : 2009 | METALLIC MATERIALS - UNIAXIAL CREEP TESTING IN TENSION - METHOD OF TEST |
BS EN 60675 : 1995 | HOUSEHOLD ELECTRIC DIRECT-ACTING ROOM HEATERS - METHODS FOR MEASURING PERFORMANCE |
NF EN ISO 1893 : 2009 | REFRACTORY PRODUCTS - DETERMINATION OF REFRACTORINESS UNDER LOAD - DIFFERENTIAL METHOD WITH RISING TEMPERATURE |
UNI CEN/TS 15866 : 2009 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - DETERMINATION OF THE THERMAL DIFFUSIVITY OF CERAMIC FIBRES |
UNE-EN 13381-9:2016 | Test methods for determining the contribution to the fire resistance of structural members - Part 9: Applied fire protection systems to steel beams with web openings |
EN ISO 204:2009 | Metallic materials - Uniaxial creep testing in tension - Method of test (ISO 204:2009) |
I.S. EN 60675:1996 | HOUSEHOLD ELECTRIC DIRECT-ACTING ROOM HEATERS - METHODS FOR MEASURING PERFORMANCE |
NF EN 1159-3 : 2003 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES, THERMOPHYSICAL PROPERTIES - PART 3: DETERMINATION OF SPECIFIC HEAT CAPACITY |
I.S. EN 15181:2017 | MEASURING METHOD OF THE ENERGY CONSUMPTION OF GAS FIRED OVENS |
BS EN 13823 : 2010 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
EN 1363-1:2012 | Fire resistance tests - Part 1: General Requirements |
DIN EN ISO 15883-1:2014-10 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006 + AMD 1:2014) |
EN 50571:2013/A1:2018 | Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines |
DIN EN 30-1-1:2013-06 | Domestic cooking appliances burning gas - Part 1-1: Safety - General (includes Amendment 1:2013) |
I.S. EN 1363-1:2012 | FIRE RESISTANCE TESTS - PART 1: GENERAL REQUIREMENTS |
UNE-EN 285:2016 | Sterilization - Steam sterilizers - Large sterilizers |
BS EN 1047-1:2005 | Secure storage units. Classification and methods of test for resistance to fire Data cabinets and diskette inserts |
BS EN 993-7:2000 | Methods of test for dense shaped refractory products Determination of modulus of rupture at elevated temperatures |
BS EN ISO 6942:2002 | Protective clothing. Protection against heat and fire. Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat |
ISO 9239-1:2010 | Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source |
BS EN 12953-11:2003 | Shell boilers Acceptance tests |
BS EN 1458-1:2011 | Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW Safety |
BS EN ISO 9239-1:2010 | Reaction to fire tests for floorings Determination of the burning behaviour using a radiant heat source |
BS EN 12290:2005 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of compression properties |
BS EN 1319:2009 | Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW |
BS EN 30-1-1 : 2008 | DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL |
BS EN 12881-2 : 2005 | CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 2: LARGE SCALE FIRE TEST |
BS EN 1159-2:2003 | Advanced technical ceramics. Ceramic composites. Thermophysical properties Determination of thermal diffusivity |
BS EN 1159-3:2003 | Advanced technical ceramics. Ceramic composites, thermophysical properties Determination of specific heat capacity |
BS EN 1894:2005 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of shear strength by compression loading of notched specimens |
ISO 1893:2007 | Refractory products Determination of refractoriness under load Differential method with rising temperature |
DIN EN 15335:2007-08 | Advanced technical ceramics - Ceramic composites - Determination of elastic properties by resonant beam method up to 2000 ?C |
EN 12788:2005 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength |
IEC 60331-1:2018 RLV | Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm |
EN 50570:2013/A1:2018 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS |
EN 50446:2006 | Straight thermocouple assembly with metal or ceramic protection tube and accessories |
DIN EN ISO 204:2009-10 | METALLIC MATERIALS - UNIAXIAL CREEP TESTING IN TENSION - METHOD OF TEST |
EN ISO 15883-1:2009/A1:2014 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006/AMD 1:2014) |
EN 12952-15:2003 | Water-tube boilers and auxiliary installations - Part 15: Acceptance tests |
NF EN 60068-3-7 : 2002 | ENVIRONMENTAL TESTING - PART 3-7: SUPPORTING DOCUMENTATION AND GUIDANCE - MEASUREMENTS IN TEMPERATURE CHAMBERS FOR TESTS A AND TEST B (WITH LOAD) |
EN 1020:2009 | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
DIN EN 621:2010-04 | NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
EN 60695-11-3:2012 | Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods |
EN 61804-2:2007 | Function blocks (FB) for process control - Part 2: Specification of FB concept |
EN 61234-1:1994 | Method of test for the hydrolitic stability of electrical insulating materials - Part 1: Plastic films |
IEC 60331-2:2018 RLV | Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20mm |
DIN EN 820-3:2004-11 | Advanced technical ceramics - Methods of testing monolithic ceramics - Thermomechanical properties - Part 3: Determination of resistance to thermal shock by water quenching |
EN 60068-3-5:2002 | Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers |
DIN EN 15181:2009-09 | MEASURING METHOD OF THE ENERGY CONSUMPTION OF GAS FIRED OVENS |
EN 61069-2:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 2: Assessment methodology |
CEN/TS 15365:2006 | Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold end method |
CEN/TS 45545-2:2009 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components |
EN 60675:1995/A1:1998 | HOUSEHOLD ELECTRIC DIRECT-ACTING ROOM HEATERS - METHODS FOR MEASURING PERFORMANCE |
EN 10319-2:2006 | Metallic materials - Tensile stress relaxation testing - Part 2: Procedure for bolted joint models |
DIN EN 1458-1:2012-02 | DOMESTIC DIRECT GAS-FIRED TUBLE DRYERS OF TYPES B22D AND B23D, OF NOMINAL HEAT INPUT NOT EXCEEDING 6 KW - PART 1: SAFETY |
IEC 60695-11-2:2017 | Fire hazard testing - Part 11-2: Test flames - 1 kW pre-mixed flame - Apparatus, confirmatory test arrangement and guidance |
EN 50399 : 2011 AMD 1 2016 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - TEST APPARATUS, PROCEDURES, RESULTS |
EN 60531:2000 | Household electric thermal storage room heaters - Methods for measuring performance |
EN 13381-4:2013 | Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied passive protection to steel members |
EN 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
DIN EN ISO 4892-1:2001-09 | PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016) |
UNI EN 30-1-1 : 2013 | DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL |
DIN EN ISO 9151:2017-05 | PROTECTIVE CLOTHING AGAINST HEAT AND FLAME - DETERMINATION OF HEAT TRANSMISSION ON EXPOSURE TO FLAME (ISO 9151:2016, CORRECTED VERSION 2017-04-01) |
DIN EN 820-1:2003-01 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - THERMOMECHANICAL PROPERTIES - PART 1: DETERMINATION OF FLEXURAL STRENGTH AT ELEVATED TEMPERATURES |
EN 13381-9:2015 | Test methods for determining the contribution to the fire resistance of structural members - Part 9: Applied fire protection systems to steel beams with web openings |
EN 60695-11-2:2017 | Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance |
EN 61189-3:2008 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards) |
EN 50200:2015 | Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
UNE-EN 13823:2012 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
AASHTO T 71:2022 | Standard Method of Test for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar |
UNE-EN 60335-2-6:2015 | Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances |
BS 88-1(2007) : 2007 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS |
BS 4937-20(1991) : 1991 AMD 7864 | INTERNATIONAL THERMOCOUPLE REFERENCE TABLES - SPECIFICATION FOR THERMOCOUPLE TOLERANCES |
AS/NZS 60335.2.78:2019 | Household and similar electrical appliances - Safety Particular requirements for appliances for outdoor barbecues (IEC 60335-2-78 Ed 2.2, MOD) |
AS/NZS 5263.1.1:2020 | Gas appliances Domestic gas cooking appliances |
IEC 60584-3:2007 | Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system |
AS/NZS 60335.2.2:2020 | Household and similar electrical appliances - Safety Particular requirements for vacuum cleaners and water-suction cleaning appliances (IEC 60335-2-2 Ed 7, MOD) |
IEC 61515:2016 | Mineral insulated metal-sheathed thermocouple cables and thermocouples |
AS/NZS 60335.2.32:2020 | Household and similar electrical appliances - Safety Particular requirements for massage appliances |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.