IEC 60874-1:2011
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
12-09-2022
Language(s)
English - French
Published date
24-11-2011
Publisher
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
Bibliography
IEC 60874-1:2011 applies to fibre optic connector sets and individual components (i.e. adaptors, plugs, sockets) for all types, sizes and structures of fibres and cables. It includes: connector set requirements; This part of IEC 60874 is divided into four clauses:
- Clauses 1 (Scope), 2 (Normative references) and 3 (Terms and definitions) contain general information pertaining to this generic specification;
- Clause 4 (Requirements) contains all the requirements to be met by connectors covered by this specification. This includes requirements for classification, the IEC specification system, documentation, materials, workmanship, quality, performance, identification, and packaging. This sixth edition cancels and replaces the fifth edition published in 2006, and constitutes a technical revision. The specific technical changes from the previous edition include removal of quality assessment procedure, to add the definition of plug-socket configuration, to reconsider a drawing showing the relationship between IEC 60874, IEC 61753, IEC 61754 series of standards., and updating the normative references.
| DevelopmentNote |
Stability Date: 2020. (10/2012)
|
| DocumentType |
Standard
|
| Pages |
45
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| DS EN 60874-1 : 2012 | Identical |
| NF EN 60874-1 : 2012 | Identical |
| NEN EN IEC 60874-1 : 2012 | Identical |
| PN EN 60874-1 : 2012 | Identical |
| VDE 0885-874-1 : 2012 | Identical |
| DIN EN 60874-1 : 2012 | Identical |
| CEI EN 60874-1 : 2012 | Identical |
| EN 60874-1:2012 | Identical |
| BS EN 60874-1:2012 | Identical |
| SANS 60874-1 : 3ED 2007 | Identical |
| UNE-EN 60874-1:2012 | Identical |
| ISO/IEC 8802-12:1998 | Information technology — Telecommuncations and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 12: Demand-Priority access method, physical layer and repeater specifications |
| DIN 47256-7:1993-02 (Draft) | OPTICAL FIBRE CONNECTORS WITH SCREW COUPLING - TYPE LSA - CONNECTOR KIT - DETAIL SPECIFICATION |
| I.S. EN 61202-1:2017 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION |
| I.S. EN 61290-3-2:2008 | OPTICAL AMPLIFIERS - TEST METHODS - PART 3-2: NOISE FIGURE PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD |
| BS ISO/IEC 11801-1:2017 | Information technology. Generic cabling for customer premises General requirements |
| BS 7718:1994 | Code of practice for installation of fibre optic cabling |
| 95/209463 DC : DRAFT JULY 1995 | IEC 86/87/CDV-1 AND CDV-2 - FIBER OPTIC TERMINOLOGY |
| 05/30134742 DC : DRAFT JUN 2005 | IEC 62005-9-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - RELIABILITY OF FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE OPTICAL COMPONENTS - PART 9-2: RELIABILITY QUALIFICATION FOR FIBRE OPTIC CONNECTOR SETS |
| BS EN 61757-1:2012 | Fibre optic sensors Generic specification |
| DIN 47257-5:1990-06 (Draft) | OPTICAL FIBRE CONNECTOR FOR SLIDE-IN-UNITS - TYPE LSB - DETAIL SPECIFICATION FOR ADAPTER WITH RESILIENT SLEEVE |
| BS EN 187000:1994 | Generic specification for optical fibre cables |
| DIN 47256-6:1990-06 (Draft) | OPTICAL FIBRE CONNECTOR WITH SCREW COUPLING - TYPE LSA - DETAIL SPECIFICATION FOR ADAPTER WITH RESILIENT SLEEVE |
| 10/30218217 DC : 0 | BS EN 61314-1-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1-1: BLANK DETAIL SPECIFICATION |
| I.S. EN 61290-5-2:2004 | OPTICAL AMPLIFIERS - TEST METHODS - PART 5-2: REFLECTANCE PARAMETERS - ELECTRICAL SPECTRUM ANALYSER METHOD |
| BS EN 62148-17:2014 | Fibre optic active components and devices. Package and interface standards Transmitter and receiver components with dual coaxial RF connectors |
| BS EN 61290-2-1:1998 | Optical fibre amplifiers. Basic specification Test methods for optical power parameters. Optical spectrum analyzer |
| BS ISO/IEC 8802-3:1996 | Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications |
| IEC 60874-6:1993 | Connectors for optical fibres and cables - Part 6: Sectional specification for fibre optic connector - Type LSA |
| BS EN 61314-1-1:2012 | Fibre optic interconnecting devices and passive components. Fibre optic fan-outs Blank detail specification |
| 07/30170378 DC : DRAFT AUG 2007 | BS EN 61290-10-1 - OPTICAL AMPLIFIER TEST METHODS - PART 10-1: MULTICHANNEL PARAMETERS - PULSE METHOD USING AN OPTICAL SWITCH AND OPTICAL SPECTRUM ANALYZER |
| ISO 20780:2018 | Space systems — Fiber optic components — Design and verification requirements |
| I.S. EN 61757-1:2012 | FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012 (EQV)) |
| I.S. EN IEC 61291-1:2018 | OPTICAL AMPLIFIERS - PART 1: GENERIC SPECIFICATION |
| CEI EN 61757-1-1 : 1ED 2017 | FIBRE OPTIC SENSORS - PART 1-1: STRAIN MEASUREMENT - STRAIN SENSORS BASED ON FIBRE BRAGG GRATINGS |
| IEC 61757-1-1:2016 | Fibre optic sensors - Part 1-1: Strain measurement - Strain sensors based on fibre Bragg gratings |
| IEC 60874-14:1993 | Connectors for optical fibres and cables - Part 14: Sectional specification for fibre optic connector - Type SC |
| IEC 60958-1:2008+AMD1:2014 CSV | Digital audio interface - Part 1: General |
| IEC 60874-19:1995 | Connectors for optical fibres and cables - Part 19: Sectional specification for fibre optic connector - Type SC-D(uplex) |
| EN 61290-5-3:2002 | Optical fibre amplifiers - Basic specification - Part 5-3: Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser |
| EN 61290-5-2:2004 | Optical amplifiers - Test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyser method |
| EN 60958-1:2008/A1:2014 | DIGITAL AUDIO INTERFACE - PART 1: GENERAL (IEC 60958-1:2008/A1:2014) |
| EN 61314-1:2012 | Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1: Generic specification |
| EN 62148-17:2014 | Fiber optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver components with dual coaxial RF connectors |
| EN 61314-1-1:2012 | Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1-1: Blank detail specification |
| EN 60874-17:1997 | Connectors for optical fibres and cables - Part 17: Sectional specification for fibre optic connector - Type F-05 (friction lock) |
| EN 50516-2-1 : 2011 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| EN 61290-1:2015 | Optical amplifiers - Test methods - Part 1: Power and gain parameters |
| EN 60874-19:1997 | Connectors for optical fibres and cables - Part 19: Sectional specification for fibre optic connector - Type SC-D(uplex) |
| EN 61290-7-1:2007 | Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method |
| DEFSTAN 08-107/3(2013) : 2013 | GENERAL REQUIREMENTS FOR THE DESIGN OF ELECTROTECHNICAL AND NAVAL WEAPON EQUIPMENT |
| EN 187000 : 92 AMD 1 95 | GENERIC SPECIFICATION: OPTICAL FIBRE CABLES |
| BS EN 50377-7-4:2011 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with full zirconia ferrule for category C |
| CEI EN 61290-11-2 : 2006 | OPTICAL AMPLIFIERS - TEST METHODS - PART 11-2: POLARIZATION MODE DISPERSION PARAMETER - POINCARE SPHERE ANALYSIS METHOD |
| BS EN 61290-2-2:1998 | Optical fibre amplifiers. Basic specification Test methods for optical power parameters. Electrical spectrum analyzer |
| 13/30285534 DC : 0 | BS EN 61290-1 - OPTICAL AMPLIFIERS - TEST METHODS - PART 1: OPTICAL POWER AND GAIN PARAMETERS |
| BS EN 61290-3-2:2008 | Optical amplifiers. Test methods Noise figure parameters. Electrical spectrum analyzer method |
| PD IEC TR 61282-1:2000 | Fibre optic communication system design guides Single-mode digital and analogue systems |
| IEC 60874-16:1994 | Connectors for optical fibres and cables - Part 16: Sectional specification for fibre optic connector - Type MT |
| BS EN 61202-1:2017 | Fibre optic interconnecting devices and passive components. Fibre optic isolators Generic specification |
| BS EN 61291-1:2012 | Optical amplifiers Generic specification |
| BS EN 61269-1:1997 | Fibre optic terminus sets Generic specification |
| BS EN 61290-5-2:2004 | Optical fibre amplifiers. Basic specification. Test methods for reflectance parameters Electrical spectrum analyser method |
| BS EN 60874-19:1997 | Connectors for optical fibres and cables Sectional specification for fibre optic connector. Type SC-D (Duplex) |
| I.S. EN 61290-11-2:2005 | OPTICAL AMPLIFIERS - TEST METHODS - PART 11-2: POLARIZATION MODE DISPERSION PARAMETER - POINCARE SPHERE ANALYSIS METHOD |
| 11/30246243 DC : 0 | BS EN 62148-17 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 17: TRANSMITTER AND RECEIVER COMPONENTS WITH DUAL COAXIAL RF CONNECTORS |
| BS EN 61290-5-3:2002 | Optical fibre amplifiers. Basic specification. Test methods for reflectance parameters Reflectance tolerance using an electrical spectrum analyser |
| 07/30163795 DC : 0 | BS EN 61290-11-1 - OPTICAL AMPLIFIERS. TEST METHODS - PART 11-1: POLARIZATION MODE DISPERSION - JONES MATRIX EIGENANALYSIS (JME) |
| CEI EN 61754-1 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 1: GENERAL AND GUIDANCE |
| BS EN 61314-1:2012 | Fibre optic interconnecting devices and passive components. Fibre optic fan-outs Generic specification |
| BS EN 61290-7-1:2007 | Optical amplifiers. Test methods Out-of-band insertion losses. Filtered optical power meter method |
| BS EN 61757-1-1:2017 | Fibre optic sensors Strain measurement. Strain sensors based on fibre Bragg gratings |
| 10/30218221 DC : 0 | BS EN 61314-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION |
| BS EN 61290-1-2:2005 | Optical amplifiers. Test methods Power and gain parameters - Electrical spectrum analyzer method |
| 98/261559 DC : DRAFT MAY 1998 | IEC 61290-3 EDITION 1 - BASIC SPECIFICATION FOR OPTICAL FIBRE AMPLIFIER TEST METHODS - PART 3-1: TEST METHODS FOR NOISE FIGURE PARAMETERS - OPTICAL SPECTRUM ANALYZER TEST METHOD |
| CSA ISO/IEC 8802-3 : 2002 : R2016 | INFORMATION TECHNOLOGY - TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - SPECIFIC REQUIREMENTS - PART 3: CARRIER SENSE MULTIPLE ACCESS WITH COLLISION DETECTION (CSMA/CD) ACCESS METHOD AND PHYSICAL LAYER SPECIFICATIONS |
| CEI EN 61314-1 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION |
| CEI EN 61290-1-2 : 2006 | OPTICAL AMPLIFIERS - TEST METHODS - PART 1-2: POWER AND GAIN PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD |
| CEI EN 61757-1 : 2013 | FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION |
| ES 200 671 : 1.2.1 | TRANSMISSION AND MULTIPLEXING (TM); PASSIVE OPTICAL COMPONENTS; OPTICAL FIBRE CONNECTORS FOR SINGLE MODE OPTICAL FIBRE COMMUNICATION SYSTEMS; COMMON REQUIREMENTS AND CONFORMANCE TESTING |
| PREN 4532 : 200P1 | AEROSPACE SERIES - CABLES, OPTICAL, SINGLE CORE 200 MICROMETER/280 MICROMETER FIBRE, 2,5 MM OUTER JACKET - TECHNICAL SPECIFICATION |
| IEC 61757:2018 | Fibre optic sensors - Generic specification |
| IEC 60874-4:1993 | Connectors for optical fibres and cables - Part 4: Sectional specification for fibre optic connector - Type CF04 |
| I.S. EN 61269-1:1999 | FIBRE OPTIC TERMINUS SETS - PART 1: GENERIC SPECIFICATION |
| CEI EN 61290-3-2 : 2010 | OPTICAL AMPLIFIERS - TEST METHODS - PART 3-2: NOISE FIGURE PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD |
| BS ISO/IEC 14763-3 : 2006 | INFORMATION TECHNOLOGY - IMPLEMENTATION AND OPERATION OF CUSTOMER PREMISES CABLING - PART 3: TESTING OF OPTICAL FIBRE CABLING |
| BS EN 61281-1:1999 | Fibre optic communication subsystems Generic specification |
| I.S. EN 61290-10-1:2009 | OPTICAL AMPLIFIERS - TEST METHODS - PART 10-1: MULTICHANNEL PARAMETERS - PULSE METHOD USING AN OPTICAL SWITCH AND OPTICAL SPECTRUM ANALYZER |
| ISO/IEC 14763-3:2014 | Information technology Implementation and operation of customer premises cabling Part 3: Testing of optical fibre cabling |
| CEI EN 60874-17 : 1998 | CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 17: SECTIONAL SPECIFICATION FOR FIBRE OPTIC CONNECTOR - TYPE F-05 (FRICTION LOCK) |
| TS 100 671 : 1.3.1 | TRANSMISSION AND MULTIPLEXING (TM); PASSIVE OPTICAL COMPONENTS; OPTICAL FIBRE CONNECTORS FOR SINGLE MODE OPTICAL FIBRE COMMUNICATION SYSTEMS; COMMON REQUIREMENTS AND CONFORMANCE TESTING |
| IEC 60874-3:1993 | Connectors for optical fibres and cables - Part 3: Sectional specification for fibre optic connector - Type CF03 |
| IEC 60874-9:1993 | Connectors for optical fibres and cables - Part 9: Sectional specification for fibre optic connector - Type OF-2 |
| IEC 60874-5:1993 | Connectors for optical fibres and cables - Part 5: Sectional specification for fibre optic connector - Type BAM |
| IEC 60794-1:1996 | Optical fibre cables - Part1: Generic specification (Revision to IEC 794-1) |
| I.S. EN ISO 11149:1998 | OPTICS AND OPTICAL INSTRUMENTS - LASERS AND LASER-RELATED EQUIPMENT - FIBRE OPTIC CONNECTORS FOR NON-TELECOMMUNICATION LASER APPLICATIONS |
| I.S. EN 61290-7-1:2007 | OPTICAL AMPLIFIERS - TEST METHODS - PART 7-1: OUT-OF-BAND INSERTION LOSSES - FILTERED OPTICAL POWER METER METHOD |
| EN 61290-1-3:2015 | Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method |
| BS EN 50516-2-1:2011 | Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications Type ODVA PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3 |
| 12/30259955 DC : 0 | BS EN 61754-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 1: GENERAL AND GUIDANCE |
| 11/30241337 DC : DRAFT JAN 2011 | BS EN 61757-1 - FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION |
| BS EN 50516-1-1:2011 | Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in IEC 61753-1-3 |
| BS EN 61290-10-3:2003 | Optical amplifiers. Test methods Multichannel parameters. Probe methods |
| BS EN 61290-10-1:2009 | Optical amplifiers. Test methods Multichannel parameters. Pulse method using an optical switch and optical spectrum analyzer |
| 13/30276654 DC : 0 | BS EN 60958-1 ED 3.0/A1 - DIGITAL AUDIO INTERFACE - PART 1: GENERAL |
| CEI EN 50516-1-1 : 2012 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3 |
| I.S. EN 61290-1-2:2006 | OPTICAL AMPLIFIERS - TEST METHODS - PART 1-2: POWER AND GAIN PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD |
| EN IEC 61281-1:2018 | Fibre optic communication subsystems - Part 1: Generic specification |
| EN 61202-1:2017 | Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification |
| BS EN IEC 61281-1:2018 | Fibre optic communication subsystems Generic specification |
| 03/309966 DC : DRAFT JULY 2003 | IEC 61290-11-2 - OPTICAL AMPLIFIER TEST METHODS - PART 11-2: POLARISATION MODE DISPERSION - POINCARE SPHERE ANALYSIS METHOD |
| CEI EN 61281-1 : 2001 | FIBRE OPTIC COMMUNICATION SUBSYSTEMS - PART 1:GENERIC SPECIFICATION |
| DD IEC/PAS 61290-3-1:2002 | Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters Optical spectrum analyzer |
| 12/30262212 DC : 0 | BS EN 50516-3-1 - INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| ISO/IEC 11801-1:2017 | Information technology — Generic cabling for customer premises — Part 1: General requirements |
| 12/30266214 DC : 0 | ISO/IEC CD 14763-3 - IMPLEMENTATION AND OPERATION OF CPC - PART 3: TESTING OF OPTICAL FIBRE CABLING (2ND EDITION) |
| BS EN 61290-6-1:1998 | Optical fibre amplifiers. Basic specification Test methods for pump leakage parameters. Optical demultiplexer |
| BS EN 4532:2009 | Aerospace series. Cables, optical, single core 200 ?m/280 ?m fibre, 2,5 mm outer jacket. Technical specification |
| BS EN 50516-3-1:2014 | Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications Type ODVA APC terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3 |
| BS EN 60874-17:1997 | Connectors for optical fibres and cables Sectional specification for fibre optic connector. Type F-05 (friction lock) |
| 04/30110918 DC : DRAFT MAR 2004 | IEC 61290-1-2 ED 2.0 - OPTICAL AMPLIFIER TEST METHODS - PART 1-2: OPTICAL POWER AND GAIN PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD |
| BS ISO 8802-12 : 1998 | INFORMATION TECHNOLOGY - TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - SPECIFIC REQUIREMENTS - DEMAND-PRIORITY ACCESS METHOD, PHYSICAL LAYER AND REPEATER SPECIFICATIONS |
| IEC 60874-13:1993 | Connectors for optical fibres and cables - Part 13: Sectional specification for fibre optic connector - Type CF08 |
| CEI EN 50516-2-1 : 2012 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| BS EN 61290-11-1:2008 | Optical amplifiers. Test methods Polarization mode dispersion parameter. Jones matrix eigenanalysis (JME) |
| I.S. EN IEC 61281-1:2018 | FIBRE OPTIC COMMUNICATION SUBSYSTEMS - PART 1: GENERIC SPECIFICATION |
| I.S. EN 61314-1:2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION (IEC 61314-1:2011 (EQV)) |
| BS EN 60958-1 : 2008 | DIGITAL AUDIO INTERFACE - PART 1: GENERAL |
| I.S. EN 61290-1-3:2015 | OPTICAL AMPLIFIERS - TEST METHODS - PART 1-3: POWER AND GAIN PARAMETERS - OPTICAL POWER METER METHOD |
| I-ETS 300 671 : NOV 96 | TRANSMISSION AND MULTIPLEXING (TM) - PASSIVE OPTICAL COMPONENTS - FIBRE OPTICAL CONNECTORS FOR SINGLE-MODE OPTICAL FIBRE COMMUNICATION SYSTEMS - COMMON REQUIREMENTS AND CONFORMANCE TESTING |
| IEC 60874-12:1993 | Connectors for optical fibres and cables - Part 12: Sectional specification for fibre optic connector - Type OCCA-BU |
| CEI EN 60874-19 : 1998 | CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 19: SECTIONAL SPECIFICATION FOR FIBRE OPTIC CONNECTOR - TYPE SC-D (UPLEX) |
| ISO/IEC 11801:2002 | Information technology Generic cabling for customer premises |
| IEC 60874-11:1993 | Connectors for optical fibres and cables - Part 11: Sectional specification for fibre optic connector - Type OCCA-PC |
| IEC 61202-1:2016 | Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification |
| IEC PAS 61290-3-1:2002 | Optical fibre amplifiers - Basic specification - Part 3-1: Test methods for noise figure parameters - Optical spectrum analyzer |
| IEC 60874-10:1992 | Connectors for optical fibres and cables - Part 10: Sectional specification - Fibre optic connector type BFOC/2,5 |
| IEC 60874-17:1995 | Connectors for optical fibres and cables - Part 17: Sectional specification for fibre optic connector - Type F-05 (friction lock) |
| IEC 61290-3-2:2008 | Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method |
| IEC 61754-1:2013 | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 1: General and guidance |
| IEC 61290-10-1:2009 | Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer |
| EN 61757-1-1:2017 | Fibre optic sensors – Part 1-1: Strain measurement – Strain sensors based on fibre Bragg gratings |
| EN 61290-11-1:2008 | Optical amplifiers - Test methods - Part 11-1: Polarization mode dispersion parameter - Jones matrix eigenanalysis (JME) |
| I.S. EN 50377-7-4:2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-4: LC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH FULL ZIRCONIA FERRULE FOR CATEGORY C |
| CEI EN 61290-6-1 : 1999 | OPTICAL FIBRE AMPLIFIERS - BASIC SPECIFICATION - TEST METHODS FOR PUMP LEAKAGE PARAMETERS - OPTICAL DEMULTIPLEXER |
| 17/30331301 DC : 0 | BS ISO/IEC 14763-3 AMENDMENT 1 - INFORMATION TECHNOLOGY - IMPLEMENTATION AND OPERATION OF CUSTOMER PREMISES CABLING - PART 3: TESTING OF OPTICAL FIBRE CABLING |
| BS EN IEC 61291-1:2018 | Optical amplifiers Generic specification |
| 04/30110909 DC : DRAFT MAR 2004 | IEC 61291-1 ED 2.0 - OPTICAL AMPLIFIERS - PART 1: GENERIC SPECIFICATION |
| ANSI INCITS 237 : 1995 : R2006 | INFORMATION TECHNOLOGY - FIBRE DISTRIBUTED DATA INTERFACE (FDDI) - TOKEN RING LOW-COST FIBRE PHYSICAL LAYER MEDIUM DEPENDENT (LCF-PMD) |
| IEEE 802.3U : 1995 | LOCAL AND METROPOLITAN AREA NETWORKS: SUPPLEMENT TO CARRIER SENSE MULTIPLE ACCESS WITH COLLISION DETECTION (CSMA/CD) ACCESS METHOD AND PHYSICAL LAYER SPECIFICATIONS: MEDIA ACCESS CONTROL (MAC) PARAMETERS, PHYSICAL LAYER, MEDIUM ATTACHMENT UNITS, AND REPEATER FOR 100 MB/S OPERATION, TYPE 100 BASE T (CLAUSE 21-30) |
| 06/30153138 DC : DRAFT JULY 2006 | BS IEC 60958-1 ED 3.0 - DIGITAL AUDIO INTERFACE - PART 1: GENERAL |
| ISO/IEC 14575:2000 | Information technology Microprocessor systems Heterogeneous InterConnect (HIC) (Low-Cost, Low-Latency Scalable Serial Interconnect for Parallel System Construction) |
| CEI EN 61291-1 : 2013 | OPTICAL AMPLIFIERS - PART 1: GENERIC SPECIFICATION |
| BS EN 61290-1:2015 | Optical amplifiers. Test methods Power and gain parameters |
| I.S. EN 62148-17:2014 | FIBER OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 17: TRANSMITTER AND RECEIVER COMPONENTS WITH DUAL COAXIAL RF CONNECTORS |
| 11/30249050 DC : 0 | BS EN 61291-1 - OPTICAL AMPLIFIERS - PART 1: GENERIC SPECIFICATION |
| CEI EN 61290-2-2 : 1999 | OPTICAL FIBRE AMPLIFIERS - BASIC SPECIFICATION - PART 2-2: TEST METHODS FOR OPTICAL POWER PARAMETERS - ELECTRICAL SPECTRUM ANALYZER |
| BS EN 61290-3-1:2003 | Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters Optical spectrum analyzer method |
| ES 201 286 : 1.1.1 | TRANSMISSION AND MULTIPLEXING (TM) - PASSIVE OPTICAL COMPONENTS - PASSIVE OPTICAL COMPONENTS - CONNECTOR-TYPE OPTICAL FIXED ATTENUATORS FOR SINGLE MODE OPTICAL FIBRE COMMUNICATIONS SYSTEMS - COMMON REQUIREMENTS AND CONFORMANCE TESTING |
| 01/704470 DC : 0 | PREN 4532 - AEROSPACE SERIES - CABLES, OPTICAL, SINGLE CORE, 200/280 MICRO M FIBRE, 2,5 MM OUTER JACKET - TECHNICAL SPECIFICATION |
| EN IEC 61291-1:2018 | Optical amplifiers - Part 1: Generic specification |
| CEI EN 50516-3-1 : 2014 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| ANSI INCITS 237 : 1995 : R2001 | INFORMATION TECHNOLOGY - FIBRE DISTRIBUTED DATA INTERFACE (FDDI) - TOKEN RING LOW-COST FIBRE PHYSICAL LAYER MEDIUM DEPENDENT (LCF-PMD) |
| CEI EN 61314-1-1 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1-1: BLANK DETAIL SPECIFICATION |
| I.S. EN 50516-2-1:2011 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| I.S. EN 50516-3-1:2014 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| I.S. EN 62676-3:2015 | VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 3: ANALOG AND DIGITAL VIDEO INTERFACES |
| I.S. EN 61290-3-1:2003 | OPTICAL AMPLIFIERS - TEST METHODS - PART 3-1: NOISE FIGURE PARAMETERS - OPTICAL SPECTRUM ANALYZER METHOD |
| CEI EN 61290-7-1 : 2008 | OPTICAL AMPLIFIERS - TEST METHODS - PART 7-1: OUT-OF-BAND INSERTION LOSSES - FILTERED OPTICAL POWER METER METHOD |
| I.S. EN 4532:2009 | AEROSPACE SERIES - CABLES, OPTICAL, SINGLE CORE 200 [MU]M/280 [MU]M FIBRE, 2,5 MM OUTER JACKET - TECHNICAL SPECIFICATION |
| IEEE 802.3-2012 | IEEE Standard for Ethernet |
| IEC 61281-1:2017 | Fibre optic communication subsystems - Part 1: Generic specification |
| IEC 60874-7:1993 | Connectors for optical fibres and cables - Part 7: Sectional specification for fibre optic connector - Type FC |
| IEC 60874-8:1993 | Connectors for optical fibres and cables - Part 8: Sectional specification for fibre optic connector - Type D |
| IEC 60874-15:1994 | Connectors for optical fibres and cables - Part 15: Sectional specification for fibre optic connector - Type DS |
| IEC 61290-11-1:2008 | Optical amplifiers - Test methods - Part 11-1: Polarization mode dispersion parameter - Jones matrix eigenanalysis (JME) |
| IEC 61290-5-2:2003 | Optical amplifiers - Test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyser method |
| IEC 61290-3-1:2003 | Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method |
| IEC 61314-1:2011 | Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1: Generic specification |
| IEC 62148-17:2013 | Fibre optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver components with dual coaxial RF connectors |
| IEC 62676-3:2013 | Video surveillance systems for use in security applications - Part 3: Analog and digital video interfaces |
| IEC 61290-1-3:2015 | Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method |
| IEC 61314-1-1:2011 | Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1-1: Blank detail specification |
| IEC 61290-11-2:2005 | Optical amplifiers - Test methods - Part 11-2: Polarization mode dispersion parameter - Poincaré sphere analysis method |
| IEC 61757-1:2012 | Fibre optic sensors - Part 1: Generic specification |
| IEC 61290-1-2:2005 | Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method |
| IEC 61290-7-1:2007 | Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method |
| EN 4532 : 2009 | Aerospace series - Cables, optical, single core 200 µm/280 µm fibre, 2,5 mm outer jacket - Technical specification |
| EN ISO 11149 : 1997 | OPTICS AND OPTICAL INSTRUMENTS - LASERS AND LASER-RELATED EQUIPMENT - FIBRE OPTIC CONNECTORS FOR NON-TELECOMMUNICATION LASER APPLICATIONS |
| BS EN 61290-11-2:2005 | Optical amplifiers. Test methods Polarization mode dispersion parameter - Poincaré sphere analysis method |
| CEI EN 50377-7-4 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-4: LC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH FULL ZIRCONIA FERRULE FOR CATEGORY C |
| BS EN 61290-1-3:2015 | Optical amplifiers. Test methods Power and gain parameters. Optical power meter method |
| 14/30296100 DC : 0 | BS EN 61290-1-3 - OPTICAL AMPLIFIERS - TEST METHODS - PART 1-3: OPTICAL POWER AND GAIN PARAMETERS - OPTICAL POWER METER METHOD |
| I.S. EN 60958-1:2008 | DIGITAL AUDIO INTERFACE - PART 1: GENERAL |
| CEI EN 61290-10-1 : 2010 | OPTICAL AMPLIFIERS - TEST METHODS - PART 10-1: MULTICHANNEL PARAMETERS - PULSE METHOD USING AN OPTICAL SWITCH AND OPTICAL SPECTRUM ANALYZER |
| BS EN 61754-1:2013 | Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces General and guidance |
| 13/30288119 DC : 0 | BS EN 61757-2-1 - FIBRE OPTIC SENSORS - STRAIN MEASUREMENT - PART 2-1: FIBRE BRAGG GRATINGS |
| CEI EN 61290-11-1 : 2010 | OPTICAL AMPLIFIERS - TEST METHODS - PART 11-1: POLARIZATION MODE DISPERSION PARAMETER - JONES MATRIX EIGENANALYSIS (JME) |
| 16/30325971 DC : 0 | BS ISO/IEC 11801-1 - INFORMATION TECHNOLOGY - GENERIC CABLING FOR CUSTOMER PREMISES - PART 1: GENERAL REQUIREMENTS |
| CSA ISO/IEC 14763-3 : 2015 | INFORMATION TECHNOLOGY - IMPLEMENTATION AND OPERATION OF CUSTOMER PREMISES CABLING - PART 3: TESTING OF OPTICAL FIBRE CABLING |
| CSA ISO/IEC 8802-3 : 2002 : R2011 | INFORMATION TECHNOLOGY - TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - SPECIFIC REQUIREMENTS - PART 3: CARRIER SENSE MULTIPLE ACCESS WITH COLLISION DETECTION (CSMA/CD) ACCESS METHOD AND PHYSICAL LAYER SPECIFICATIONS |
| I.S. EN 61291-1:2012 | OPTICAL AMPLIFIERS - PART 1: GENERIC SPECIFICATION (IEC 61291-1:2012 (EQV)) |
| CSA ISO/IEC 8802-3 : 2002 | INFORMATION TECHNOLOGY - TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - SPECIFIC REQUIREMENTS - PART 3: CARRIER SENSE MULTIPLE ACCESS WITH COLLISION DETECTION (CSMA/CD) ACCESS METHOD AND PHYSICAL LAYER SPECIFICATIONS |
| I.S. EN 61290-11-1:2008 | OPTICAL AMPLIFIERS - TEST METHODS - PART 11-1: POLARIZATION MODE DISPERSION PARAMETER - JONES MATRIX EIGENANALYSIS (JME) |
| I.S. EN 61757-1-1:2017 | FIBRE OPTIC SENSORS - PART 1-1: STRAIN MEASUREMENT - STRAIN SENSORS BASED ON FIBRE BRAGG GRATINGS |
| I.S. EN 61314-1-1:2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1-1: BLANK DETAIL SPECIFICATION (IEC 61314-1-1:2011 (EQV)) |
| I.S. EN 61290-1:2015 | OPTICAL AMPLIFIERS - TEST METHODS - PART 1: POWER AND GAINPARAMETERS |
| CEI EN 61290-2-3 : 1999 | OPTICAL FIBRE AMPLIFIERS - BASIC SPECIFICATION - PARTS 2-3: TEST METHODS FOR OPTICAL POWER PARAMETERS - OPTICAL POWER METER |
| ISO/IEC/IEEE 8802-3:2017 | Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Standard for Ethernet |
| IEC 60874-2:1993 | Connectors for optical fibres and cables - Part 2: Sectional specification for fibre optic connector - Type F-SMA |
| I.S. EN 61754-1:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 1: GENERAL AND GUIDANCE |
| I.S. EN 61290-10-3:2003 | OPTICAL AMPLIFIERS - TEST METHODS - PART 10-3: MULTICHANNEL PARAMETERS - PROBE METHODS |
| IEC TR 61282-1:2000 | Fibre optic communication system design guides - Part 1: Single-mode digital and analogue systems |
| EN 50516-1-1:2011/AC:2012 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3 |
| IEC 61290-1:2014 | Optical amplifiers - Test methods - Part 1: Power and gain parameters |
| BS EN ISO 11149:1997 | Optics and optical instruments. Lasers and laser related equipment. Fibre optic connectors for non-telecommunication laser applications |
| ISO 11149:1997 | Optics and optical instruments Lasers and laser-related equipment Fibre optic connectors for non-telecommunication laser applications |
| IEC 61290-10-3:2002 | Optical amplifiers - Test methods - Part 10-3: Multichannel parameters - Probe methods |
| IEC 61290-5-3:2002 | Basic specification for optical amplifier test methods - Part 5-3: Test methods for reflectance parameters - Reflectance tolerance test method using electrical spectrum analyzer |
| EN 61290-10-3:2003 | Optical amplifiers - Test methods - Part 10-3: Multichannel parameters - Probe methods |
| EN 61290-10-1:2009 | Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer |
| EN 61290-3-1:2003 | Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method |
| EN 61757-1 : 2012 | FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012) |
| EN 61290-1-2:2005 | Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method |
| EN 61290-3-2:2008 | Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method |
| EN 61291-1:2012 | Optical amplifiers - Part 1: Generic specification |
| EN 50377-7-4:2011 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 7-4: LC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with full zirconia ferrule for category C |
| EN 61269-1:1997 | Fibre optic terminus sets - Part 1: Generic specification |
| EN 61290-11-2:2005 | Optical amplifiers - Test methods - Part 11-2: Polarization mode dispersion parameter - Poincaré sphere analysis method |
| EN 50516-3-1:2014 | Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications - Part 3-1: Type ODVA APC terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3 |
| EN 62676-3:2015 | Video surveillance systems for use in security applications - Part 3: Analog and digital video interfaces |
| EN 61754-1:2013 | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 1: General and guidance |
| CEI EN 62148-17 : 2014 | FIBER OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 17: TRANSMITTER AND RECEIVER COMPONENTS WITH DUAL COAXIAL RF CONNECTORS |
| IEC 60050-731:1991 | International Electrotechnical Vocabulary (IEV) - Part 731: Optical fibre communication |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| AS/NZS IEC 62676.3:2020 | Video surveillance systems for use in security applications Analog and digital video interfaces |
| IEC 61753-1:2007 | Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards |
| IEC 60410:1973 | Sampling plans and procedures for inspection by attributes |
| IEC TR 61930:1998 | Fibre optic graphical symbology |
| ISO 8601:2004 | Data elements and interchange formats Information interchange Representation of dates and times |
| IEC TR 61931:1998 | Fibre optic - Terminology |
| ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
| ISO 129:1985 | Technical drawings Dimensioning General principles, definitions, methods of execution and special indications |
| IEC 60695-11-5 : 2.0 | FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE |
| IEC 60695-11-5:2016 | Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
£140.72
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English - French
PDF - English - French
PDF 3 Users - English - French
PDF 5 Users - English - French
PDF 9 Users - English - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.