IEC 61000-6-1 : 3.0

Current

Current The latest, up-to-date edition.

Add to Watchlist

This Standard has been added successfully to your Watchlist.
Please visit My Watchlist to see all standards that you are watching.

Please log in or create an account to add this standard to your Watchlist.

We could not add this standard to your Watchlist.
Please retry or contact support for assistance.

You need to be logged in to add this standard to your Watchlist.
Please log in now or create an account to add.

You already added this Product in the Watchlist.

ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS

Available format(s): Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

Language(s): English - French

Published date: 10-08-2016

Publisher: International Electrotechnical Committee

Add to Watchlist

Table of Contents - (Show below) - (Hide below)

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Performance criteria
5 Conditions during testing
6 Product documentation
7 Applicability
8 Measurement uncertainty
9 Immunity test requirements
Annex A (informative) - Guidance for product committees
Bibliography

Abstract - (Show below) - (Hide below)

Pertains to electrical and electronic equipment intended for use in residential, commercial, public and light-industrial locations.

General Product Information - (Show below) - (Hide below)

Committee	TC 77
Development Note	Stability Date: 2020. (08/2016)
Document Type	Standard
ISBN
Pages
Published
Publisher	International Electrotechnical Committee
Status	Current
Supersedes	IEC 61000-6-1:2005

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
BS EN IEC 61000-6-1:2019 (published 2019-02)	Identical
EN IEC 61000-6-1:2019	Identical
PN-EN IEC 61000-6-1 : 2019	Identical
DIN EN IEC 61000-6-1:2019-11	Identical
UNE-EN IEC 61000-6-1:2019	Identical
CSA IEC 61000-6-1:19	Identical
IS 14700 : Part 6 : Sec 1 : 2019	Identical
CEI EN IEC 61000-6-1 : 2019	Identical
I.S. EN IEC 61000-6-1:2019	Identical
NEN-EN-IEC 61000-6-1: 2019	Identical
VDE 0839-6-1:2019-11	Identical
JIS C 61000-6-1:2019	Identical
EN 61000-6-1:2007	Identical
SANS 61000-6-1 : 2ED 2005(R2010)	Identical
CSA C61000-6-1 : 2009	Identical
I.S. EN 61000-6-1:2007	Identical
CEI EN 61000-6-1 : 2007	Identical
DIN EN 61000-6-1 : 2007	Identical
SAC GB/T 17799.1 : 1999	Identical
VDE 0839-6-1 : 2007	Identical
BS EN 61000-6-1:2007	Identical
CSA C61000-6-1 : 2009 : R2014	Identical
PN EN 61000-6-1 : 2008	Identical
UNE-EN 61000-6-1:2007	Identical
BIS IS 14700-6-1 : 2008(R2015)	Identical
BS EN IEC 61000-6-1:2019	Identical
NF EN 61000-6-1 : 2007	Identical
SN EN 61000-6-1 : 2007	Identical
NEN EN IEC 61000-6-1 : 2007	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

BS EN 61400-3:2009	Wind turbines Design requirements for offshore wind turbines
I.S. EN 50090-2-2:1998	HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS
BS EN 60601-1-2:2015	Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard. Electromagnetic disturbances. Requirements and tests
ISO/IEC 14762:2009	Information technology Functional safety requirements for Home and Building Electronic Systems (HBES)
07/30170091 DC : DRAFT AUG 2007	BS ISO 22200 - ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY
PD IEC/TR 60601-4-2:2016	MEDICAL ELECTRICAL EQUIPMENT - PART 4-2: GUIDANCE AND INTERPRETATION - ELECTROMAGNETIC IMMUNITY: PERFORMANCE OF MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS
PD ISO/PAS 19695:2015	Motorcycles. Functional safety
DD IEC TS 62370 : 2004	ELECTROACOUSTICS - INSTRUMENTS FOR THE MEASUREMENT OF SOUND INTENSITY - ELECTROMAGNETIC AND ELECTROSTATIC COMPATIBILITY REQUIREMENTS AND - TEST PROCEDURES
DIN EN 15500 E : 2008	CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT
11/30253123 DC : 0	BS EN 12016 - ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY
BS ISO 16110-1:2007	HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 1: SAFETY
BS EN 16657 : 2016	TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TRANSPORT TANK EQUIPMENT FOR OVERFILL PREVENTION DEVICES FOR STATIC TANKS
BS EN 15500:2008	CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT
PD IEC/TR 61000-2-14:2006 (published 2006-01)	Electromagnetic compatibility (EMC) Environment. Overvoltages on public electricity distribution networks
14/30291768 DC : 0	BS EN 1434-4 - HEAT METERS - PART 4: PATTERN APPROVAL TESTS
CEI EN 60942 : 2004	ELECTROACOUSTICS SOUND CALIBRATORS
BS EN 50412-2-1:2005 (published 2005-12)	Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz Residential, commercial and industrial environment - Immunity requirements
BS EN ISO 15971:2014	Natural gas. Measurement of properties. Calorific value and Wobbe index
BS EN 61260:1996	ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS
DIN EN 415-10:2014-07	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
I.S. EN 61000-6-5:2015	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-5: GENERIC STANDARDS - IMMUNITY FOR EQUIPMENT USED IN POWER STATION AND SUBSTATION ENVIRONMENT
UNE-EN 16657:2016	Tanks for the transport of dangerous goods - Transport tank equipment for overfill prevention devices for static tanks
BS EN 50090-2-3:2005	HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-3: SYSTEM OVERVIEW - GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN HBES
EN 61326-1:2013	Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
BS EN 62282-3-100:2012	FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
I.S. EN 50486:2008	EQUIPMENT FOR USE IN AUDIO AND VIDEO DOOR-ENTRY SYSTEMS
11/30212367 DC : 0	BS EN ISO 13482 - ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR NON-INDUSTRIAL ROBOTS - NON-MEDICAL PERSONAL CARE ROBOT
OIML R 46-1 & 2 : 2012	ACTIVE ELECTRICAL ENERGY METERS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS
DD CEN ISO/TS 14907-1:2010	Electronic fee collection. Test procedures for user and fixed equipment Description of test procedures
BS EN 50270:2015	Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
CSA C61400-3 : 2011 : R2016	WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES
15/30326444 DC : 0	BS EN 60942 - ELECTROACOUSTICS - SOUND CALIBRATORS
BS EN 61260-1:2014	ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 1: SPECIFICATIONS
BS ISO 17089-1:2019	MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - ULTRASONIC METERS FOR GAS - PART 1: METERS FOR CUSTODY TRANSFER AND ALLOCATION MEASUREMENT
IEC 61800-3:2017	Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
OIML R 143 : 2009	INSTRUMENTS FOR THE CONTINUOUS MEASUREMENT OF SO[2] IN STATIONARY SOURCE EMISSIONS
OIML R 85-1 & 2 : 2008	AUTOMATIC LEVEL GAUGES FOR MEASURING THE LEVEL OF LIQUID IN STATIONARY STORAGE TANKS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROL AND TESTS
OIML R 137-1 & 2 : 2012 AMD 2014	GAS METERS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS
AAMI TIR15 : 2016	PHYSICAL ASPECTS OF ETHYLENE OXIDE STERILIZATION
PREN 15194 : DRAFT 2015	CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES
EN 61439-1:2011	Low-voltage switchgear and controlgear assemblies - Part 1: General rules
IEC 60942 REDLINE : 4ED 2017	ELECTROACOUSTICS - SOUND CALIBRATORS
ISO/TS 19880-1:2016	Gaseous hydrogen Fuelling stations Part 1: General requirements
BS EN 61000-6-3 : 2007	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
EN 1434-4:2015	Heat meters - Part 4: Pattern approval tests
I.S. EN 378-2:2016	REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
I.S. EN 415-10:2014	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
ISO 14990-1:2016	Earth-moving machinery Electrical safety of machines utilizing electric drives and related components and systems Part 1: General requirements
I.S. EN 50491-5-2:2010	GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-2: EMC REQUIREMENTS, FOR HBES/BACS USED IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRY ENVIRONMENT
CAN/CSA-IEC 61000-6-5:18	Electromagnetic compatibility (EMC) ? Part 6-5: Generic standards ? Immunity for equipment used in power station and substation environment (Adopted IEC 61000-6-5:2015, first edition, 2015-08) \| Compatibilité électromagnétique (CEM) ? Partie 6-5 : Normes génériques ? Immunité pour les équipements utilisés dans les environnements de centrales électriques et de postes (norme IEC 61000-6-5:2015 adoptée, première édition, 2015-08)
S.R. CLC/TS 61643-22:2016	LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 22: SURGE PROTECTIVE DEVICES CONNECTED TO TELECOMMUNICATIONS AND SIGNALLING NETWORKS - SELECTION AND APPLICATION PRINCIPLES
CEI EN 61000-4-2 : 2011	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST
S.R. CLC/TR 50538:2010
CSA C61400-1 : 2014	WIND TURBINES - PART 1: DESIGN REQUIREMENTS
BS EN 50539-11 : 2013	LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
OIML D 11 : 2013	GENERAL REQUIREMENTS FOR MEASURING INSTRUMENTS - ENVIRONMENTAL CONDITIONS
UNE-EN 1434-4:2016	Heat meters - Part 4: Pattern approval tests
EN 16657:2016	Tanks for the transport of dangerous goods - Transport tank equipment for overfill prevention devices for static tanks
CSA C22.2 No. 60601.1.2 : 2016	MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS
TS 134 124 : 13.0.0	UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS FOR MOBILE TERMINALS AND ANCILLARY EQUIPMENT (3GPP TS 34.124 VERSION 14.0.0 RELEASE 14)
ISO/IEC 14763-2:2012	Information technology Implementation and operation of customer premises cabling Part 2: Planning and installation
I.S. EN 1434-4:2015	HEAT METERS - PART 4: PATTERN APPROVAL TESTS
I.S. EN 60601-1-2:2015	MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS
17/30356734 DC : 0	BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS
OIML R 59-1 : 2016	MOISTURE METERS FOR CEREAL GRAINS AND OILSEEDS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
NF EN 61260-1 : 2014	ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 1: SPECIFICATIONS
NF ISO 16110-1 : 2009	HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 1: SAFETY
NF EN 50486 : 2008	EQUIPMENT FOR USE IN AUDIO AND VIDEO DOOR-ENTRY SYSTEMS
CSA C22.2 No. 61980-1 : 2016	ELECTRIC VEHICLE WIRELESS POWER TRANSFER (WPT) SYSTEMS - PART 1: GENERAL REQUIREMENTS
ISO/IEC 24702:2006	Information technology Generic cabling Industrial premises
ISO/IEC 14543-3-6:2007	Information technology Home electronic system (HES) architecture Part 3-6: Media and media dependent layers Network based on HES Class 1, twisted pair
DIN EN 13355:2010-06	COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
NF EN 50090-5-2 : 2004	HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 5-2: MEDIA AND MEDIA DEPENDENT LAYERS - NETWORK BASED ON HBES CLASS 1, TWISTED PAIR
UNE-EN 378-2:2017	Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
BS EN 15091:2013	Sanitary tapware. Electronic opening and closing sanitary tapware
PD IEC/TR 61439-0:2013	Low-voltage switchgear and controlgear assemblies Guidance to specifying assemblies
BS EN 13160-1:2003	Leak detection systems General principles
PD IEC/TS 63053:2017	General requirements for residual current operated protective devices for DC systems
BS EN 50174-2 : 2009	INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
UNE-EN 61851-1:2012	Electric vehicle conductive charging system - Part 1: General requirements
15/30286010 DC : 0	BS ISO 14990-1 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
DIN EN 15091:2014-03	SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE
IEC 62282-3-1:2007	Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety
UNE-EN 50083-2:2013	Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment
IEC 60839-11-1:2013	Alarm and electronic security systems - Part 11-1: Electronic access control systems - System and components requirements
BS EN 12110:2014	Tunnelling machines. Air locks. Safety requirements
BS EN 415-6:2013	Safety of packaging machines Pallet wrapping machines
I.S. EN 12921-1:2005	MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
EN 60728-4:2008	Cable networks for television signals, sound signals and interactive services - Part 4: Passive wideband equipment for coaxial cable networks
CLC/TR 50538 : 2010	Guide to EMC Directive conformity of equipment designed for military purposes
EN 60651:1994/A2:2001	SOUND LEVEL METERS (IEC 60651:1979/A2:2000)
EN 62282-3-1 : 2007	FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
EN 61000-6-5:2015/AC:2018-01	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-5: GENERIC STANDARDS - IMMUNITY FOR EQUIPMENT USED IN POWER STATION AND SUBSTATION ENVIRONMENT (IEC 61000-6-5:2015/COR1:2017)
CLC/TS 61643-22:2016	Low-voltage surge protective devices - Part 22: Surge protective devices connected to telecommunications and signalling networks - Selection and application principles
EN 61547:2009	Equipment for general lighting purposes - EMC immunity requirements
EN 12355:2003+A1:2010	Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements
IEC 61204-3:2016 RLV	Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC)
EN 61260-1:2014	Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Specifications
EN 50539-11 : 2013 AMD 1 2014	LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
EN 12043:2014	Food processing machinery - Intermediate provers - Safety and hygiene requirements
EN 60839-11-2:2015/AC:2015	ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-2: ELECTRONIC ACCESS CONTROL SYSTEMS - APPLICATION GUIDELINES (IEC 60839-11-2:2014)
EN 60601-1-2:2015	Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests
EN 50412-2-1 : 2005 COR 2009	POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 2-1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT - IMMUNITY REQUIREMENTS
EN 60730-1:2016	Automatic electrical controls - Part 1: General requirements
DIN EN ISO 4064-2:2017-10	WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014)
EN 12621:2006+A1:2010	Machinery for the supply and circulation of coating materials under pressure - Safety requirements
EN 60839-11-1:2013/AC:2015	ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-1: ELECTRONIC ACCESS CONTROL SYSTEMS - SYSTEM AND COMPONENTS REQUIREMENTS (IEC 60839-11-1:2013)
EN 61131-2:2007	Programmable controllers - Part 2: Equipment requirements and tests
EN 61851-1:2011	Electric vehicle conductive charging system - Part 1: General requirements
EN 12041:2014	Food processing machinery - Moulders - Safety and hygiene requirements
EN 62676-1-1:2014/AC:2014	VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL (IEC 62676-1-1:2013)
EN 50083-2:2012/A1:2015	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT
EN 61400-3:2009	Wind turbines - Part 3: Design requirements for offshore wind turbines
EN 13616:2004/AC:2006	OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS
EN 12921-1:2005+A1:2010	Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements
EN 61000-6-3:2007/A1:2011/AC:2012	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010)
EN 12757-1:2005+A1:2010	Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
EN 13355:2004+A1:2009	Coating plants - Combined booths - Safety requirements
EN 13160-1:2016	Leak detection systems - Part 1: General Principles
DIN EN 15500:2008-12	CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT
BS EN 61000-4-2:2009	Electromagnetic compatibility (EMC) Testing and measurement techniques. Electrostatic discharge immunity test
DIN EN ISO 15971 E : 2014	NATURAL GAS - MEASUREMENT OF PROPERTIES - CALORIFIC VALUE AND WOBBE INDEX (ISO 15971:2008)
12/30159217 DC : 0	BS EN 60601-1-2 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS
12/30266709 DC : 0	BS EN ISO 4064-2 - WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
11/30247811 DC : 0	BS EN 415-10 - SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
DD CLC/TS 50136-4:2004	ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 4: ANNUNCIATION EQUIPMENT USED IN ALARM RECEIVING CENTERS
BS EN 62282-5-1:2012 (published 2013-01)	Fuel cell technologies Portable fuel cell power systems. Safety
17/30358367 DC : 0	BS EN 17128 - NON-APPROVED LIGHT MOTORIZED VEHICLES FOR THE TRANSPORTATION OF PERSONS AND GOODS AND RELATED FACILITIES - PERSONAL LIGHT ELECTRIC VEHICLES (PLEV) - SAFETY REQUIREMENTS AND TEST METHODS
13/30291392 DC : 0	BS EN 61000-6-4/A2 ED 2 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
15/30321305 DC : 0	BS EN 15194 - CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES
00/244020 DC : DRAFT SEP 2000	IEC 61800-3 ED.2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS PRODUCT STANDARD INCLUDING SPECIFIC TEST METHODS
05/30127272 DC : DRAFT JAN 2005	EN 1434-4 - HEAT METERS - PART 4: PATTERN APPROVAL TESTS
PD CLC/TS 61643-22:2016	Low-voltage surge protective devices Surge protective devices connected to telecommunications and signalling networks. Selection and application principles
ANSI/AAMI/IEC 60601-1-2:2014	MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS
BS EN 60942:2003	ELECTROACOUSTICS - SOUND CALIBRATORS
BS ISO 15971 : 2008	NATURAL GAS - MEASUREMENT OF PROPERTIES - CALORIFIC VALUE AND WOBBE INDEX
CEI EN 61547 : 2010	EQUIPMENT FOR GENERAL LIGHTING PURPOSES - EMC IMMUNITY REQUIREMENTS
13/30260741 DC : 0	BS EN 50270 - ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN
14/30301251 DC : 0	BS EN 13160-1 - LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES
NF EN 62282-3-201 : 2017	FUEL CELL TECHNOLOGIES - PART 3-201: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS FOR SMALL FUEL CELL POWER SYSTEMS
08/30177580 DC : DRAFT FEB 2008	BS EN 61260-1 - ELECTRO ACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 1: SPECIFICATIONS
BS PD IEC TS 62370 : 2004	ELECTROACOUSTICS - INSTRUMENTS FOR THE MEASUREMENT OF SOUND INTENSITY - ELECTROMAGNETIC AND ELECTROSTATIC COMPATIBILITY REQUIREMENTS AND TEST PROCEDURES
BS EN 61400-1 : 2005	WIND TURBINES - PART 1: DESIGN REQUIREMENTS
15/30295265 DC : 0	BS EN 13204 - DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
BS EN 50491-5-2:2010	General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS) EMC requirements for HBES/BACS used in residential, commercial and light industry environment
PD IEC/TS 61000-5-10:2017	Electromagnetic compatibility (EMC) Installation and mitigation guidelines. Guidance on the protection of facilities against HEMP and IEMI
CLC/TS 50136-4:2004	Alarm systems - Alarm transmission systems and equipment - Part 4: Annunciation equipment used in alarm receiving centres
15/30331519 DC : 0	BS EN 15500-1 - CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5
PD CLC/TR 50083-2-1:2014	Cable networks for television signals, sound signals and interactive services Electromagnetic compatibility measurements
06/30150081 DC : DRAFT MAY 2006	IEC 60728-4 - CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 4: PASSIVE WIDEBAND EQUIPMENT FOR COAXIAL CABLE NETWORKS
BS EN 62676-1-1:2014	Video surveillance systems for use in security applications System requirements. General
I.S. EN 60942:2003	ELECTROACOUSTICS - SOUND CALIBRATORS
CEI EN 50438 : 2014	REQUIREMENTS FOR MICRO-GENERATING PLANTS TO BE CONNECTED IN PARALLEL WITH PUBLIC LOW-VOLTAGE DISTRIBUTION NETWORKS
BS IEC 60533:2015	Electrical and electronic installations in ships. Electromagnetic compatibility (EMC). Ships with a metallic hull
15/30309542 DC : DRAFT MAY 2015	BS EN 62820-1-1 ED 1.0 - BUILDING INTERCOM SYSTEMS - PART 1-1: GENERAL REQUIREMENTS
UNE-EN ISO 4064-2:2015	Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014)
CEI EN 50486 : 2009	EQUIPMENT FOR USE IN AUDIO AND VIDEO DOOR-ENTRY SYSTEMS
BS ISO 3999:2004	RADIATION PROTECTION - APPARATUS FOR INDUSTRIAL GAMMA RADIOGRAPHY - SPECIFICATIONS FOR PERFORMANCE, DESIGN AND TESTS
12/30212889 DC : 0	BS ISO 13137 - WORKPLACE ATMOSPHERES - PUMPS FOR PERSONAL SAMPLING OF CHEMICAL AND BIOLOGICAL AGENTS - REQUIREMENTS AND TEST METHODS
IEC TR 61000-2-14:2006	Electromagnetic compatibility (EMC) - Part 2-14: Environment - Overvoltages on public electricity distribution networks
BS EN 50465:2015	European product standard for combined heating power systems using gas fuel
DIN EN 15500-1:2016-01 (Draft)	ENERGY PERFORMANCE OF BUILDINGS - CONTROL FOR HEATING, VENTILATING AND AIR CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5
EN 50174-2 : 2009 AMD 2 2014	INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
IEC 62236-5 REDLINE : 3ED 2018	RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 5: EMISSION AND IMMUNITY OF FIXED POWER SUPPLY INSTALLATIONS AND APPARATUS
ISO 26262-4:2011	Road vehicles Functional safety Part 4: Product development at the system level
OIML R 60 ANNEXES : 2017	METROLOGICAL REGULATION FOR LOAD CELLS ANNEXES
PREN 1539 : DRAFT 2012	DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
I.S. EN 61000-1-2:2016	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-2: GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC SYSTEMS INCLUDING EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA
I.S. EN 62282-3-1:2007	FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
I.S. EN 50270:2015	ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN
BS EN 15194:2017	Cycles. Electrically power assisted cycles. EPAC Bicycles
I.S. EN 50539-11:2013	LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
BS PD ISO/IEC TR 29106 : 2007	INFORMATION TECHNOLOGY - GENERIC CABLING - INTRODUCTION TO THE MICE ENVIRONMENTAL CLASSIFICATION
I.S. EN 60651:1994	SOUND LEVEL METERS (IEC 60651:1979 (EQV))
I.S. EN 61547:2009	EQUIPMENT FOR GENERAL LIGHTING PURPOSES - EMC IMMUNITY REQUIREMENTS
OIML R 80-2 : 2017	ROAD AND RAIL TANKERS WITH LEVEL GAUGING - PART 2: METROLOGICAL CONTROLS AND TESTS
S.R. CLC/TS 50549-2:2015	REQUIREMENTS FOR GENERATING PLANTS TO BE CONNECTED IN PARALLEL WITH DISTRIBUTION NETWORKS - PART 2: CONNECTION TO A MV DISTRIBUTION NETWORK
I.S. EN 13616-1:2016	OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS -PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE
S.R. CLC/TR 50083-2-1:2014	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2-1: ELECTROMAGNETIC COMPATIBILITY MEASUREMENTS
EN 50173-1:2011	Information technology - Generic cabling systems - Part 1: General requirements
PREN 50465 : DRAFT 2011	GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
UNE-EN ISO 13137:2014	Workplace atmospheres - Pumps for personal sampling of chemical and biological agents - Requirements and test methods (ISO 13137:2013)
I.S. EN 15500:2008	CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT
NF EN 61400-1 : 2006 AMD 1 2015	WIND TURBINES - PART 1: DESIGN REQUIREMENTS
NF EN 50174-2 : 2009 AMD 1 2011	INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
NF EN 61547 : 2009	EQUIPMENT FOR GENERAL LIGHTING PURPOSES - EMC IMMUNITY REQUIREMENTS
IEC 60942:2017	Electroacoustics - Sound calibrators
I.S. EN 60146-1-1:2010	SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS
I.S. EN 60204-32:2008	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
IEC 61643-22:2015	Low-voltage surge protective devices - Part 22: Surge protective devices connected to telecommunications and signalling networks - Selection and application principles
EN 61260:1995/A1:2001	ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS
I.S. EN 50465:2015	GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
IEC 60533 REDLINE : 3ED 2015	ELECTRICAL AND ELECTRONIC INSTALLATIONS IN SHIPS - ELECTROMAGNETIC COMPATIBILITY (EMC) - SHIPS WITH A METALLIC HULL
IEC 60204-33:2009	Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment
DIN EN 12621:2011-07	Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010)
DIN EN 12581:2011-02	Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements (includes Amendment A1:2010)
DIN EN 12981:2010-06	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
DIN EN 12041:2015-02	FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 12016:2013-12	Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity
BS EN 12981 : 2005	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
BS EN 13355 : 2004	COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
BS EN 12757-1 : 2005	MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
EN 62282-3-100:2012	Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
BS EN 61131-2:2007	PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS
BS EN 12043:2014	FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 746-2:2010	Industrial thermoprocessing equipment Safety requirements for combustion and fuel handling systems
17/30354643 DC : 0	BS EN 62933-2-1 - ELECTRIC ENERGY STORAGE (ESS) SYSTEMS - PART 2-1: UNIT PARAMETERS AND TESTING METHODS - GENERAL SPECIFICATION
06/30154990 DC : 0	BS EN 60204-32 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
I.S. EN 14351-1:2006	WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 1: WINDOWS AND EXTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND/OR SMOKE LEAKAGE CHARACTERISTICS
I.S. EN 415-6:2013	SAFETY OF PACKAGING MACHINES - PART 6: PALLET WRAPPING MACHINES
I.S. EN 12757-1:2005	MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
I.S. EN 14143:2013	RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS
DIN EN 1434-4:2019-08	Thermal energy meters - Part 4: Pattern approval tests (includes Amendment A1:2018)
I.S. EN 12016:2013	ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY
IEC 61326-1:2012 RLV	Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
I.S. EN 12043:2014	FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 746-2:2010	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS
IEC 60942:2017 RLV	Electroacoustics - Sound calibrators
DIN EN 13616:2004-09	OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS
I.S. EN 12621:2006	MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
I.S. EN 453:2014	FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
EN 61400-1:2005/A1:2010	WIND TURBINES - PART 1: DESIGN REQUIREMENTS
I.S. EN 12355:2003	FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12981:2005	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN 13160-1:2016	LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES
I.S. EN 13355:2005	COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
I.S. EN 12041:2014	FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 15091:2013	SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE
I.S. EN 809:1998	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
I.S. EN 12110:2014	TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS
I.S. EN 12581:2006	COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
UNI EN 453 : 2014	FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 61800-3:2005	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004 (EQV))
UNE-EN 13616-1:2016	Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device
CEI EN 61260-2 : 2017	ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN-EVALUATION TESTS
I.S. EN ISO 13137:2013	WORKPLACE ATMOSPHERES - PUMPS FOR PERSONAL SAMPLING OF CHEMICAL AND BIOLOGICAL AGENTS - REQUIREMENTS AND TEST METHODS (ISO 13137:2013)
I.S. EN 50173-1:2011	INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS
OIML R 140 : 2007	MEASURING SYSTEMS FOR GASEOUS FUEL
14/30279327 DC : 0	BS EN 61800-3 AMD2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS
BS EN 50083-2 : 2012	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT
ASTM F 3020 : 2016	Performance Standard for Hand-Worn Metal Detectors Used in Safety and Security
I.S. EN 50438:2013	REQUIREMENTS FOR MICRO-GENERATING PLANTS TO BE CONNECTED IN PARALLEL WITH PUBLIC LOW-VOLTAGE DISTRIBUTION NETWORKS
CEI CLC/TR 50373 : 2005	WIND TURBINES - ELECTROMAGNETIC COMPATIBILITY
CEI EN 50083-2 : 2012	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT
BS ISO 17089-1:2010	Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement
I.S. EN 50174-2:2009	INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
16/30320034 DC : 0	BS ISO 26262-4 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 4: PRODUCT DEVELOPMENT AT THE SYSTEM LEVEL
BS EN ISO 4064-2:2017	Water meters for cold potable water and hot water Test methods
IEC TR 61439-0:2013	Low-voltage switchgear and controlgear assemblies - Part 0: Guidance to specifying assemblies
BS EN ISO 13482:2014	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS
TS 136 113 : 13.0.0	LTE; EVOLVED UNIVERSAL TERRESTRIAL RADIO ACCESS (E-UTRA); BASE STATION (BS) AND REPEATER ELECTROMAGNETIC COMPATIBILITY (EMC) (3GPP TS 36.113 VERSION 14.2.0 RELEASE 14)
BS EN 50486:2008	Equipment for use in audio and video door-entry systems
UNI CEI EN ISO 4064-2 : 2014	WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
NF EN 50412-2-1 : 2006	POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 2-1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT - IMMUNITY REQUIREMENTS
BS EN 61252 : 1997	ELECTROACOUSTICS - SPECIFICATIONS FOR PERSONAL SOUND EXPOSURE METERS
DD IEC/TS 61000-1-2:2001	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-2: GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC SYSTEMS INCLUDING EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA
IEC TR 61000-2-5 REDLINE : 3ED 2017	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-5: ENVIRONMENT - DESCRIPTION AND CLASSIFICATION OF ELECTROMAGNETIC ENVIRONMENTS
12/30258755 DC : 0	BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
CEI EN 61400-3 : 2009	WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES
05/30129947 DC : 0	EN 15163 - MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS
16/30354071 DC : 0	BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
09/30181706 DC : 0	BS EN 12355:2003/A1 - FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 50438:2013 (published 2015-06)	Requirements for micro-generating plants to be connected in parallel with public low-voltage distribution networks
05/30129943 DC : 0	EN 15162 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
11/30254162 DC : 0	BS EN 45501 - METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
13/30291774 DC : 0	BS EN 378-2 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
BS EN ISO 13137:2013	Workplace atmospheres — Pumps for personal sampling of chemical and biological agents — Requirements and test methods
OIML R 137-1 : 2006	GAS METERS - PART 1: REQUIREMENTS
BS EN 61000-6-3 : 2007 : INC : AMD 1 : 2011	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
IEC TR 61000-2-5:2017	Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments
I.S. EN 60839-11-1:2013	ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-1: ELECTRONIC ACCESS CONTROL SYSTEMS - SYSTEM AND COMPONENTS REQUIREMENTS
CEI EN 62282-3-100 : 2012	FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
DIN EN ISO 13137 E : 2014	WORKPLACE ATMOSPHERES - PUMPS FOR PERSONAL SAMPLING OF CHEMICAL AND BIOLOGICAL AGENTS - REQUIREMENTS AND TEST METHODS (ISO 13137:2013)
07/30152812 DC : DRAFT AUG 2007	BS EN 50174-2 - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
PD CLC/TR 50538:2010	Guide to EMC Directive conformity of equipment designed for military purposes
IEC 63044-5-2:2017	Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light-industrial environments
BS EN 61800-3 : 2004	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS
IEC TS 61000-1-2:2008	Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
CAN/CSA-IEC 61000-4-2:12 (R2017)	Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test (Adopted IEC 61000-4- 2:2008, second edition, 2008-12) \| Compatibilité électromagnétique (CEM) - Partie 4-2: Techniques d\'essai et de mesure - Essai d\'immunité aux décharges électrostatiques (norme CEI 61000-4-2:2008 adoptée, deuxième édition, 2008-12)
IEC 61204-3 REDLINE : 3ED 2016	LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC)
I.S. EN 61000-6-4:2007	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
UNE-EN 62676-1-1:2015	Video surveillance systems for use in security applications - Part 1-1: System requirements - General
I.S. EN 61851-1:2011	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS
TS 137 114 : 14.1.0	UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); LTE; ACTIVE ANTENNA SYSTEM (AAS) BASE STATION (BS) ELECTROMAGNETIC COMPATIBILITY (EMC) (3GPP TS 37.114 VERSION 14.1.0 RELEASE 14)
I.S. EN 50491-4-1:2012	GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 4-1: GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS)
IEC TS 62370:2004+AMD1:2017 CSV	Electroacoustics - Instruments for the measurement of sound intensity - Electromagnetic and electrostatic compatibility requirements and test procedures
EN IEC 62933-2-1:2018	Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification
EN 60204-1 : 2006 COR 2010	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
I.S. EN IEC 62933-2-1:2018	ELECTRICAL ENERGY STORAGE (EES) SYSTEMS - PART 2-1: UNIT PARAMETERS AND TESTING METHODS - GENERAL SPECIFICATION
BS EN 61000-6-4 : 2007	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
BS ISO 26262-4:2011	ROAD VEHICLES - FUNCTIONAL SAFETY - PART 4: PRODUCT DEVELOPMENT AT THE SYSTEM LEVEL
S.R. CLC/TS 50549-1:2015	REQUIREMENTS FOR GENERATING PLANTS TO BE CONNECTED IN PARALLEL WITH DISTRIBUTION NETWORKS - PART 1: CONNECTION TO A LV DISTRIBUTION NETWORK ABOVE 16 A
UNI EN 415-10 : 2014	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
UNE-EN 15091:2014	Sanitary tapware - Electronic opening and closing sanitary tapware
OIML R 139 : 2007	COMPRESSED GASEOUS FUEL MEASURING SYSTEMS FOR VEHICLES
OIML R 49-2 : 2013	WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
PREN 1434-4 : DRAFT 2014	HEAT METERS - PART 4: PATTERN APPROVAL TESTS
PREN 13160-1 : DRAFT 2014	LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES
CLC/TR 50083-2-1:2014	Cable networks for television signals, sound signals and interactive services - Part 2-1: Electromagnetic compatibility measurements
PREN 12978 : DRAFT 2017	INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
UNI EN ISO 15971 : 2014	NATURAL GAS - MEASUREMENT OF PROPERTIES - CALORIFIC VALUE AND WOBBE INDEX
OIML R 126 : 2012	EVIDENTIAL BREATH ANALYZERS
CEI EN 50491-5-2 : 2011	GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-2: EMC REQUIREMENTS FOR HBES/BACS USED IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRY ENVIRONMENT
ISO 17089-1:2010	Measurement of fluid flow in closed conduits - Ultrasonic meters for gas Part 1: Meters for custody transfer and allocation measurement
EN 15500-1:2017	Energy Performance of Buildings - Control for heating, ventilating and air conditioning applications - Part 1: Electronic individual zone control equipment - Modules M3-5, M4-5, M5-5
DIN EN 12921-1:2011-02	Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements (includes Amendment A1:2010)
ISO 16110-1:2007	Hydrogen generators using fuel processing technologies Part 1: Safety
EN 50465 : 2015	GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
IEC 62282-3-201:2017	Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
IEC 60204-1:2016	Safety of machinery - Electrical equipment of machines - Part 1: General requirements
IEC 60533:2015	Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull
IEC 60755:2017	General safety requirements for residual current operated protective devices
IEC 62103:2003	Electronic equipment for use in power installations
I.S. EN 15194:2017	CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES
ISO/PAS 19695:2015	Motorcycles Functional safety
IEEE/ANSI C63.15-2010	RECOMMENDED PRACTICE FOR THE IMMUNITY MEASUREMENT OF ELECTRICAL AND ELECTRONIC EQUIPMENT
I.S. EN 60204-1:2006	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
IEC 61000-6-4:2018	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
DIN EN 746-2:2011-02	Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
NF EN 61851-1 : 2012	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS
DIN EN 12355:2011-02	Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 14143:2013-10	RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS
DIN EN 12043:2015-02	FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 12110:2014-10	TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS
BS EN 12355 : 2003	FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
IEC 61260-1:2014	Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Specifications
UNE-EN 45501:2016	Metrological aspects of non-automatic weighing instruments
04/30123347 DC : DRAFT OCT 2004	IEC 61439-1 - LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
BS EN 809 : 1998	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
IEC 62282-5-1:2012	Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
UNE-EN 50160:2011	Voltage characteristics of electricity supplied by public electricity networks
EN 809 : 1998 COR 2010	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
EN 809:1998+A1:2009	Pumps and pump units for liquids - Common safety requirements
UNE-EN 60730-1:2013	Automatic electrical controls for household and similar use - Part 1: General requirements
UNE-EN 60204-1:2007	Safety of machinery - Electrical equipment of machines - Part 1: General requirements
UNI EN 12921-1 : 2010	MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
UNI EN 12581 : 2010	COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
UNI EN 809 : 2009	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
UNI EN 14143 : 2013	RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS
EN 60839-11-1:2013/AC:2015	ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-1: ELECTRONIC ACCESS CONTROL SYSTEMS - SYSTEM AND COMPONENTS REQUIREMENTS (IEC 60839-11-1:2013)
EN 50465:2015	Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW
UNI EN 415-6 : 2013	SAFETY OF PACKAGING MACHINES - PART 6: PALLET WRAPPING MACHINES
UNI EN 12981 : 2009	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
UNI EN 12016 : 2013	ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY
UNI EN 12757-1 : 2010	MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
UNI EN 12043 : 2015	FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 15091 : 2014	SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE
UNI EN 13616 : 2004	OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS
UNI EN 12041 : 2015	FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 746-2 : 2011	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS
UNI EN 12110 : 2014	TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS
UNI EN 13355 : 2009	COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
UNI EN 12621 : 2010	MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
UNI EN 12355 : 2010	FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
11/30217192 DC : 0	BS EN ISO 4064-2 - WATER METERS INTENDED FOR THE METERING OF COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
DIN EN ISO 13137:2014-03	Workplace atmospheres - Pumps for personal sampling of chemical and biological agents - Requirements and test methods (ISO 13137:2013)
BS EN 62820-1-1:2016	Building intercom systems System requirements. General
BS EN 1434-4 : 2015	HEAT METERS - PART 4: PATTERN APPROVAL TESTS
TR 134 926 : 13.0.0	UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); LTE; ELECTROMAGNETIC COMPATIBILITY (EMC); TABLE OF INTERNATIONAL REQUIREMENTS FOR MOBILE TERMINALS AND ANCILLARY EQUIPMENT (3GPP TR 34.926 VERSION 14.0.0 RELEASE 14)
BS EN 60804:2001	Integrating-averaging sound level meters
PREN 14236 : DRAFT 2017	ULTRASONIC DOMESTIC GAS METERS
05/30136667 DC : DRAFT JUL 2005	IEC 61000-6-3 ED 2 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
UNE-EN 62282-3-1:2011	Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety
13/30285941 DC : 0	BS EN 62041 - SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - EMC REQUIREMENTS
10/30214970 DC : 0	BS EN 13616 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS
I.S. EN 13616:2004	OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS
05/30136673 DC : DRAFT JUL 2005	IEC 61000-6-4 ED 2 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
CEI EN 60728-4 : 2008	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 4: PASSIVE WIDEBAND EQUIPMENT FOR COAXIAL CABLE NETWORKS
08/30180966 DC : DRAFT APR 2008	BS EN 50160 - VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC DISTRIBUTION NETWORKS
IEC 61326-1 REDLINE : 2.0	ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS
I.S. EN 61400-1:2005	WIND TURBINES - PART 1: DESIGN REQUIREMENTS
OIML R 117-1 : 2007	DYNAMIC MEASURING SYSTEMS FOR LIQUIDS OTHER THAN WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
13/30286135 DC : 0	BS EN 13616-1 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - REQUIREMENTS AND TEST/ASSESSMENT METHODS - PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE
NF EN 62676-1-1 : 2014	VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL
I.S. EN 61000-6-3:2007	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006 (EQV))
BS EN 415-10:2014	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
18/30368636 DC : 0	BS EN 12016 - ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY
PREN 13204 : DRAFT 2015	DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
13/30292662 DC : 0	BS EN 61260-2 ED.1.0 - ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN EVALUATION TESTS
BS EN 61326-1:2013	Electrical equipment for measurement, control and laboratory use. EMC requirements General requirements
ANSI N42.55 : 2013	PERFORMANCE OF PORTABLE TRANSMISSION X-RAY SYSTEMS FOR USE IN IMPROVISED EXPLOSIVE DEVICE AND HAZARDOUS DEVICE IDENTIFICATION
BS EN 61260-2 : 2016	ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN-EVALUATION TESTS
UNE-EN ISO 13482:2014	Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014)
BS EN 60839-11-1:2013	Alarm and electronic security systems Electronic access control systems. System and components requirements
I.S. EN 61260-1:2014	ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 1: SPECIFICATIONS
PD CLC/TR 50373:2004	WIND TURBINES - ELECTROMAGNETIC COMPATIBILITY
BS EN 60728-4:2008	Cable networks for television signals, sound signals and interactive services Passive wideband equipment for coaxial cable networks
DIN EN ISO 4064-2:2016-09 (Draft)	WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014)
I.S. EN 50090-2-3:2005	HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-3: SYSTEM OVERVIEW - GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN HBES
BS EN 13616-1:2016	Overfill prevention devices for static tanks for liquid fuels Overfill prevention devices with closure device
02/645215 DC : DRAFT OCT 2002	EN 50090-2-3:2002 - HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-3: SYSTEM OVERVIEW - GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN HBES
BS EN 50133-1:1997	ALARM SYSTEMS - ACCESS CONTROL SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1: SYSTEM REQUIREMENTS
CSA IEC 61000.4.2 : 2012	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST
CEI EN 50173-1 : 2011	INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS
ANSI/CSA FC 1:2014	FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
CLC/TS 50549-2:2015	Requirements for generating plants to be connected in parallel with distribution networks - Part 2: Connection to a MV distribution network
I.S. EN 50083-2:2012	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT
PREN 378-2 : DRAFT 2013	REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
CSA ISO/IEC 14543-3-6 : 2007 : R2012	INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-6: MEDIA AND MEDIA DEPENDENT LAYERS - TWISTED PAIR FOR NETWORK BASED CONTROL OF HES CLASS 1
DIN EN ISO 15971:2014-09	Natural gas - Measurement of properties - Calorific value and Wobbe index (ISO 15971:2008)
TS 137 113 : 13.1.0	DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2+) (GSM); UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); LTE; E-UTRA, UTRA AND GSM/EDGE; MULTI-STANDARD RADIO (MSR) BASE STATION (BS) ELECTROMAGNETIC COMPATIBILITY (EMC) (3GPP TS 37.113 VERSION 14.2.0 RELEASE 14)
PD IEC/TR 61000-2-5:2017 (published 2017-02)	Electromagnetic compatibility (EMC) Environment. Description and classification of electromagnetic environments
CLC/TR 50373:2004	Wind turbines - Electromagnetic compatibility
TS 136 124 : 13.1.0	LTE; EVOLVED UNIVERSAL TERRESTRIAL RADIO ACCESS (E-UTRA); ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS FOR MOBILE TERMINALS AND ANCILLARY EQUIPMENT (3GPP TS 36.124 VERSION 14.1.0 RELEASE 14)
PREN 45501 : DRAFT 2011	METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
I.S. EN 50160:2010	VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS
ANSI C63.18 : 2014	RECOMMENDED PRACTICE FOR AN ON-SITE, AD HOC TEST METHOD FOR ESTIMATING ELECTROMAGNETIC IMMUNITY OF MEDICAL DEVICES TO RADIATED RADIO-FREQUENCY (RF) EMISSIONS FROM RF TRANSMITTERS
TS 125 113 : 13.0.1	UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); BASE STATION (BS) AND REPEATER ELECTROMAGNETIC COMPATIBILITY (EMC) (3GPP TS 25.113 VERSION 13.1.0 RELEASE 13)
I.S. EN 15500-1:2017	ENERGY PERFORMANCE OF BUILDINGS - CONTROL FOR HEATING, VENTILATING AND AIR CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5
I.S. EN 62820-1-1:2016	BUILDING INTERCOM SYSTEMS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL
I.S. EN 62282-3-100:2012	FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012 (EQV))
I.S. EN ISO 13482:2014	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS (ISO 13482:2014)
ISO/TS 20100:2008	Gaseous hydrogen Fuelling stations
I.S. EN ISO 4064-2:2017	WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014)
EN 378-2:2016	Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
CEI EN 50090-9-1 : 2005	HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 9-1: INSTALLATION REQUIREMENTS - GENERIC CABLING FOR HBES CLASS 1 TWISTED PAIR
17/30362673 DC : 0	BS EN 12978 - INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
CEI EN 60146-1-1 : 2013	SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS
I.S. EN 50412-2-1:2009	POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 2-1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT - IMMUNITY REQUIREMENTS
DIN EN 12757-1:2011-02	Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010)
I.S. EN 60730-1:2016	AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS
IEC TS 60204-34:2016	Safety of machinery - Electrical equipment of machines - Part 34: Requirements for machine tools
I.S. EN 61131-2:2007	PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS
I.S. CWA 14642:2003	CEN WORKSHOP AGREEMENT (CWA) - ELECTRICAL INTERFACE FOR DOMESTIC COGENERATION - REQUIREMENTS FOR DISTRIBUTION NETWORK CONNECTION FOR MICRO COGENERATION SYSTEMS FOR DOMESTIC USE UP TO 16 A PER PHASE IN LOW-VOLTAGE DISTRIBUTION NETWORKS
IEC 62041:2017	Transformers, power supplies, reactors and similar products - EMC requirements
ISO/IEC TR 29106:2007	Information technology Generic cabling Introduction to the MICE environmental classification
IEC 60364-4-44:2007+AMD1:2015+AMD2:2018 CSV	Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances
IEC 61000-6-4:2018 RLV	Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
IEC 62236-5:2018	Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus
IEC 61131-2:2017	Industrial-process measurement and control - Programmable controllers - Part 2: Equipment requirements and tests
IEC TR 62869:2013	Activities and considerations related to wireless power transfer (WPT) for audio, video and multimedia systems and equipment
I.S. EN 60439-1:2000	LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES
IEC 60728-2:2018	Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment
IEC 62820-3-2:2018	Building intercom systems - Part 3-2: Application guidelines - Advanced security building intercom systems (ASBIS)
IEC 61204-3:2016	Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC)
EN 61260-2:2016/A1:2017	ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN-EVALUATION TESTS (IEC 61260-2:2016/A1:2017)
DIN EN 15091 E : 2014	SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE
DIN EN 809:2012-10	Pumps and pump units for liquids - Common safety requirements
DIN EN 45501:2016-03	METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
BS EN 453:2014	FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
IEC TS 63053:2017	General requirements for residual current operated protective devices for DC system
BS EN 50090-2-2 : 1997	HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS
IEC 60804:2000	Integrating-averaging sound level meters
IEC 61439-1:2011	Low-voltage switchgear and controlgear assemblies - Part 1: General rules
UNE-EN 60839-11-2:2015	Alarm and electronic security systems - Part 11-2: Electronic access control systems - Application guidelines
BS EN 61851-1:2011	Electric vehicle conductive charging system General requirements
14/30238347 DC : 0	BS EN 60204-1 ED 6.0 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
BS EN 12621 : 2006	MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
UNE-EN 61000-6-5:2016	Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment
ISO 13482:2014	Robots and robotic devices Safety requirements for personal care robots
UNE-EN 50539-11:2013	Low-voltage surge protective devices - Surge protective devices for specific application including d.c. - Part 11: Requirements and tests for SPDs in photovoltaic applications
ISO 4064-2:2014	Water meters for cold potable water and hot water Part 2: Test methods
UNE-EN 1539:2010	Dryers and ovens, in which flammable substances are released - Safety requirements
IEC 61000-6-3:2006+AMD1:2010 CSV	Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
IEC TS 61000-5-10:2017	Electromagnetic compatibility (EMC) - Part 5-10: Installation and mitigation guidelines - Guidance on the protection of facilities against HEMP and IEMI
IEC 61547:2009	Equipment for general lighting purposes - EMC immunity requirements
11/30211394 DC : DRAFT MAR 2011	BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS
UNE-EN 415-6:2014	Safety of packaging machines - Part 6: Pallet wrapping machines
IEC 60728-4:2007	Cable networks for television signals, sound signals and interactive services - Part 4: Passive wideband equipment for coaxial cable networks
IEC 60839-11-2:2014	Alarm and electronic security systems - Part 11-2: Electronic access control systems - Application guidelines
09/30204029 DC : 0	BS EN 61439-1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
BS EN 12041:2014	FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS
IEC 60601-1-2:2007	Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests
UNE-EN 62282-5-1:2013	Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
BS EN 12016:2013	ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY
IEC 61400-1:2005+AMD1:2010 CSV	Wind turbines - Part 1: Design requirements
UNE-ISO 16110-1:2015	Hydrogen generators using fuel processing technologies -- Part 1: Safety
BS EN 14351-1 : 2006	WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 1: WINDOWS AND EXTERNAL PEDESTRIAN DOORSETS
IEC 61400-3:2009	Wind turbines - Part 3: Design requirements for offshore wind turbines
IEC 61252:1993+AMD1:2000+AMD2:2017 CSV	Electroacoustics - Specifications for personal sound exposure meters
ISO 13137:2013	Workplace atmospheres — Pumps for personal sampling of chemical and biological agents — Requirements and test methods
IEC 62282-3-100:2012	Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
10/30173705 DC : DRAFT SEP 2010	BS EN 62282-5-1 - FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY
BS EN 378-2:2016	Refrigerating systems and heat pumps. Safety and environmental requirements Design, construction, testing, marking and documentation
04/30089617 DC : DRAFT MARCH 2004
IEC 61000-4-2:2008	Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
BS EN 14143:2013	Respiratory equipment. Self-contained re-breathing diving apparatus
IEC 61439-1:2020	Low-voltage switchgear and controlgear assemblies - Part 1: General rules
BS EN 60204-33:2011	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT
IEC 61000-1-2:2016	Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
BS ISO 14990-1:2016 (published 2017-03)	Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems General requirements
BS EN 60439-1:1999	Low-voltage switchgear and controlgear assemblies Type-tested and partially type-tested assemblies
IEC 61260-2:2016+AMD1:2017 CSV	Electroacoustics - Octave-band and fractional-octave band filters - Part 2: Pattern evaluation tests
16/30301661 DC : 0	BS EN 61439-1 ED3.0 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
PD IEC/TR 62869:2013	Activities and considerations related to wireless power transfer (WPT) for audio, video and multimedia systems and equipment
ISO 15971:2008	Natural gas Measurement of properties Calorific value and Wobbe index
UNE-EN 13160-1:2017	Leak detection systems - Part 1: General Principles
UNE-EN 14143:2014	Respiratory equipment - Self-contained re-breathing diving apparatus
EN 415-10:2014	Safety of packaging machines - Part 10: General Requirements
EN 15500:2008	Control for heating, ventilating and air-conditioning applications - Electronic individual zone control equipment
EN ISO 4064-2:2017	Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014)
EN 14143:2013	Respiratory equipment - Self-contained re-breathing diving apparatus
EN ISO 15971 : 2014	NATURAL GAS - MEASUREMENT OF PROPERTIES - CALORIFIC VALUE AND WOBBE INDEX (ISO 15971:2008)
EN 746-2:2010	Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
EN 15091:2013	Sanitary tapware - Electronic opening and closing sanitary tapware
EN 453:2014	Food processing machinery - Dough mixers - Safety and hygiene requirements
EN 12581:2005+A1:2010	Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements
EN 14351-1:2006+A2:2016	Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets
EN 13616-1:2016	Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device
EN ISO 13482:2014	Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014)
EN 15194:2017	Cycles - Electrically power assisted cycles - EPAC Bicycles
EN 415-6:2013	Safety of packaging machines - Part 6: Pallet wrapping machines
PREN 50539-11 : DRAFT 2010	LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
UNE-EN 61400-1:2006	Wind turbines - Part 1: Design requirements
UNI EN ISO 13482 : 2014	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS
I.S. EN 61326-1:2013	ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS (IEC 61326-1:2012 (EQV))
06/30127082 DC : 0	EN 50486 - EQUIPMENT FOR USE IN AUDIO AND VIDEO DOOR - ENTRY SYSTEMS
13/30291402 DC : 0	BS EN 61000-6-3/A2 ED 2 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT -INDUSTRIAL ENVIRONMENTS
CEI EN 61260-1 : 2017	ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 1: SPECIFICATIONS
BS EN 62282-3-1:2007	FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
BS EN 61000-1-2:2016	Electromagnetic compatibility (EMC) General. Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
ISO 22200:2009	Electromagnetic compatibility Product family standard for lifts, escalators and moving walks Immunity
EN IEC 60942:2018	Electroacoustics - Sound calibrators
PREN 12016 : DRAFT 2018	ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY
CSA ISO/IEC 14762 : 2010	INFORMATION TECHNOLOGY - FUNCTIONAL SAFETY REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES)
09/30211785 DC : 0	BS ISO/IEC 14763-2 - INFORMATION TECHNOLOGY - IMPLEMENTATION AND OPERATION OF CUSTOMER PREMISES CABLING - PART 2: PLANNING AND INSTALLATION
BS EN 15500-1:2017	Energy Performance of Buildings. Control for heating, ventilating and air conditioning applications Electronic individual zone control equipment. Modules M3-5, M4-5, M5-5
14/30302089 DC : 0	BS EN 61000-1-2 ED1 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-2: GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC SYSTEMS INCLUDING EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA
CEI EN 62820-1-1 : 1ED 2017	BUILDING INTERCOM SYSTEMS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL
11/30249911 DC : 0	BS EN 50465 - GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
BS EN 50173-1:2011	Information technology. Generic cabling systems General requirements
10/30234293 DC : 0	BS EN 12110 - TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS
10/30238615 DC : DRAFT NOV 2010	BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
16/30269922 DC : 0	BS EN 61851-21-2 ED 1.0 - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21-1: EMC REQUIRMENTS FOR OFF BOARD ELECTRIC VEHICLE CHARGING SYSTEMS
BS EN 50491-4-1:2012	GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 4-1: GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS)
IEC TR 60601-4-2:2016	Medical electrical equipment - Part 4-2: Guidance and interpretation - Electromagnetic immunity: performance of medical electrical equipment and medical electrical systems
03/109124 DC : DRAFT JUNE 2003	IEC 61400-1 ED.3.0 - WIND TURBINES - PART 1: DESIGN REQUIREMENTS
BS EN 61000-6-5:2015	Electromagnetic compatibility (EMC) Generic standards. Immunity for equipment used in power station and substation environment
DIN EN ISO 13482:2014-11	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS (ISO 13482:2014)
06/30156472 DC : DRAFT SEP 2006	BS EN 60146-1-1 - SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS
UNI EN 15500 : 2008	CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT
04/301784 DC : DRAFT JAN 2004	EN 848-2 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HANDFED/INTEGRATED FED ROUNTING MACHINES
10/30216008 DC : 0	BS EN 61326-1 - ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS
OIML R 146-1 : 2016	PROTEIN MEASURING INSTRUMENTS FOR CEREAL GRAIN AND OILSEEDS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
I.S. EN 61439-1:2011	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
10/30218152 DC : 0	BS EN 50539-11 - LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
11/30244172 DC : 0	BS EN 61326-1 IEC 61326-1 ED. 2 - ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS
BS EN 60839-11-2:2015	ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-2: ELECTRONIC ACCESS CONTROL SYSTEMS - APPLICATION
07/30171041 DC : DRAFT AUG 2007	DD IEC/TS 61000-1-2 -ELECTROMAGNETIC COMPATIBILITY -GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA
BS EN 61547:2009	Equipment for general lighting purposes. EMC immunity requirements
OIML R 76-1 : 2006	NON-AUTOMATIC WEIGHING INSTRUMENTS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS
DIN EN 1434-4:2016-02	HEAT METERS - PART 4: PATTERN APPROVAL TESTS
CSA ISO/IEC 14543-3-6 : 2007	INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-6: MEDIA AND MEDIA DEPENDENT LAYERS - TWISTED PAIR FOR NETWORK BASED CONTROL OF HES CLASS 1
I.S. EN ISO 15971:2014	NATURAL GAS - MEASUREMENT OF PROPERTIES - CALORIFIC VALUE AND WOBBE INDEX (ISO 15971:2008)
BS EN 60146-1-1:2010	Semiconductor converters. General requirements and line commutated converters Specification of basic requirements
CLC/TS 50549-1:2015	Requirements for generating plants to be connected in parallel with distribution networks - Part 1: Connection to a LV distribution network above 16 A
CSA C900.4 : 2013	HEAT METERS - PART 4: PATTERN APPROVAL TESTS
CEI EN 50412-2-1 : 2006	POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 2-1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT - IMMUNITY REQUIREMENTS
CSA C61400-3 : 2011	WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES
CAN/CSA-ISO/IEC 14543-3-6-07 (R2017)	Information Technology - Home Electronic System (HES) Architecture - Part 3-6: Media and Media Dependent Layers - Twisted Pair for Network Based Control of HES Class 1 (Adopted ISO/IEC 14543-3-6:2007, first edition, 2007-01)
DIN EN 15500-1 E : 2017	ENERGY PERFORMANCE OF BUILDINGS - CONTROL FOR HEATING, VENTILATING AND AIR CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5
ANSI C63.27:2017	EVALUATION OF WIRELESS COEXISTENCE
I.S. EN 62676-1-1:2014	VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL
I.S. EN 61260-2:2016	ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN-EVALUATION TESTS
I.S. EN IEC 60942:2018	ELECTROACOUSTICS - SOUND CALIBRATORS
I.S. EN 61000-4-2:2009	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST
S.R. HD 60364-4-443:2016	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-44: PROTECTION FOR SAFETY - PROTECTION AGAINST VOLTAGE DISTURBANCES AND ELECTROMAGNETIC DISTURBANCES - CLAUSE 443: PROTECTION AGAINST TRANSIENT OVERVOLTAGES OF ATMOSPHERIC ORIGIN OR DUE TO SWITCHING
UNE-EN ISO 15971:2014	Natural gas - Measurement of properties - Calorific value and Wobbe index (ISO 15971:2008)
ISO 3999-1:2000	Radiation protection Apparatus for industrial gamma radiography Part 1: Specifications for performance, design and tests
CEI EN 50491-4-1 : 2014	GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 4-1: GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS)
I.S. EN 60839-11-2:2015	ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-2: ELECTRONIC ACCESS CONTROL SYSTEMS - APPLICATION GUIDELINES
ANSI S1.40 : 2006	SPECIFICATIONS AND VERIFICATION PROCEDURES FOR SOUND CALIBRATORS
ISO 3999:2004	Radiation protection Apparatus for industrial gamma radiography Specifications for performance, design and tests
PREN 50270 : DRAFT 2013	ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN
BS EN 50160 : 2010	VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS
TR 125 941 : 3.1.0	UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); TSG RAN WG4 DOCUMENT STRUCTURE
ANSI S1.40 : 2006 : R2011	SPECIFICATIONS AND VERIFICATION PROCEDURES FOR SOUND CALIBRATORS
I.S. EN 60728-4:2008	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 4: PASSIVE WIDEBAND EQUIPMENT FOR COAXIAL CABLE NETWORKS
UNE-EN 50491-4-1:2013	General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS)
CEI CLC/TS 50136-4 : 2004	ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 4: ANNUNCIATION EQUIPMENT USED IN ALARM RECEIVING CENTRES
IEC 62933-2-1:2017	Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification
EN 50160 : 2010 AMD 1 2015	VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS
I.S. EN 61400-3:2009	WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES
BS EN 809:1998+A1:2009	Pumps and pump units for liquids. Common safety requirements
ASTM F 3278 : 2017	Standard Performance Specification for Hand-Held Metal Detectors Used in Safety and Security
I.S. EN 60204-33:2011	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT
EN 61800-3 : 2004 AMD 1 2012	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004/A1:2011)
DIN EN 415-6:2013-09	Safety of packaging machines - Part 6: Pallet wrapping machines
IEC TR 61000-2-5:2017 RLV	Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments
DIN EN 453:2015-04	FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN 61439-1:2012	Low-voltage switchgear and controlgear assemblies - Part 1: General rules
IEC 62676-1-1:2013	Video surveillance systems for use in security applications - Part 1-1: System requirements - General
IEC 62820-1-1:2016	Building intercom systems - Part 1-1: System requirements - General
IEC 60204-32:2008	Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
BS EN 12581 : 2005	COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
DD ISO/TS 20100:2008	Gaseous hydrogen. Fuelling stations
16/30354067 DC : 0	BS EN 62282-5-100 - FUEL CELL TECHNOLOGIES - PART 5-100: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY
BS EN 60204-1 : 2006	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
BS EN 60204-32:2008	Safety of machinery. Electrical equipment of machines Requirements for hoisting machines
BS EN 61439-1:2011	Low-voltage switchgear and controlgear assemblies General rules
BS EN 12921-1 : 2005	MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
BS EN 60730-1:2011	Automatic electrical controls for household and similar use General requirements
EN 12016:2013	Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity
EN 61000-6-3 : 2007 : INC : AMD 1 : 2011	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010)
EN ISO 13137:2013	Workplace atmospheres - Pumps for personal sampling of chemical and biological agents - Requirements and test methods (ISO 13137:2013)
EN 12981:2005+A1:2009	Coating plants - Spray booths for application of organic powder coating material - Safety requirements
EN 61000-4-2:2009	Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
HD 60364-4-443:2016	Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances - Clause 443: Protection against transient overvoltages of atmospheric origin or due to switching
EN 62282-5-1:2012	FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012)
DIN EN 12110:2003-05	TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS
EN 50090-2-2:1996/A2:2007	HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS
EN 60146-1-1:2010	Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements
EN 61000-1-2:2016	Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
EN 60439-1:1999/A1:2004	LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES
EN 61000-6-4:2007/A1:2011	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
EN 60204-32:2008	Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
IEC 62236-5:2018 RLV	Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus