IEC 61169-1:2013
Current
Current
The latest, up-to-date edition.
Radio frequency connectors - Part 1: Generic specification - General requirements and measuring methods
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
10-07-2013
Publisher
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Units, symbols and dimensions
5 Standards ratings and characteristics
6 Classifications into climatic categories
7 IEC type designation
8 Testing
9 Test methods
10 Quality assessment
11 Marking
Annex A (informative) - Simulated sea-water solution
for use with salt mist test (marine environment)
Bibliography
IEC 61169-1:2013, which is a generic specification, relates to radio frequency connectors for r.f. transmission lines for use in telecommunications, electronics and similar equipment. It provides the basis for the sectional standards, which apply to individual connector types. It is intended to establish uniform concepts and procedures concerning:
- terminology;
- standard ratings and characteristics;
- testing and measuring procedures concerning electrical, mechanical and climatic properties;
- classification of connectors with regard to climatic testing procedures involving temperature and humidity.
The test methods and procedures of this standard are intended for acceptance and type approval testing. This second edition cancels and replaces the first edition, published in 1992, its Amendments 1 (1996) and 2 (1997). This edition constitutes a technical revision. With respect to the previous edition, tests methods have been updated as well as terminology. The contents of the corrigendum of February 2016 have been included in this copy.
| Committee |
TC 46/SC 46F
|
| DevelopmentNote |
Stability date: 2020. (07/2013)
|
| DocumentType |
Standard
|
| Pages |
59
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN 61169-1 : 2014 COR 2016 | Identical |
| NEN EN IEC 61169-1 : 2013 C1 2016 | Identical |
| PN EN 61169-1 : 2013 AC 2016 | Identical |
| SAC GB/T 11313.1 : 2000 | Identical |
| VDE 0887-969-1 : 2014 | Identical |
| BS EN 61169-1:2013 | Identical |
| EN 61169-1:2013/AC:2016-02 | Identical |
| SN EN 61169-1:2013 | Identical |
| UNE-EN 61169-1:2013 | Identical |
| SN EN 61169-1 : 1994 AMD 2 1997 | Identical |
| NEN 11169-1 : 1994 AMD 2 1997 | Identical |
| DIN EN 61169-1 : 2014 | Identical |
| BS EN 61169-44:2013 | Radio-frequency connectors Sectional specification for series SMP push-on radio-frequency coaxial connectors |
| BS EN 61169-41:2011 | Radio-frequency connectors Sectional specification for CQA series quick lock R.F. coaxial connectors |
| I.S. EN 61169-19:2011 | RADIO-FREQUENCY CONNECTORS - PART 19: SECTIONAL SPECIFICATION - RADIO FREQUENCY COAXIAL CONNECTORS OF TYPE SSMB |
| BS EN 61169-51:2015 | Radio-frequency connectors Sectional specification for RF coaxial connectors with inner diameter of outer conductors 13,5 mm with bayonet lock. Characteristic impedance 50 O (type QLI) |
| BS EN 61169-35:2011 | Radio-frequency connectors Sectional specification for 2,92 series RF connectors |
| NF EN 61169-41 : 2011 | RADIO-FREQUENCY CONNECTORS - PART 41: SECTIONAL SPECIFICATION FOR CQA SERIES QUICK LOCK R.F. COAXIAL CONNECTORS |
| BS EN 60966-1:1999 | Radio frequency and coaxial cable assemblies Generic specification. General requirements and test methods |
| I.S. EN 61169-47:2015 | RADIO-FREQUENCY CONNECTORS - PART 47: SECTIONAL SPECIFICATION FOR RADIO-FREQUENCY COAXIAL CONNECTORS WITH CLAMP COUPLING, TYPICALLY FOR USE IN 75 OHMS CABLE NETWORKS (TYPE F-QUICK) |
| 13/30282681 DC : 0 | BS EN 61169-48 ED.1 - RADIO-FREQUENCY CONNECTORS - PART 48: SECTIONAL SPECIFICATION FOR BMP SERIES BLIND MATING R.F. COAXIAL CONNECTORS |
| BS EN 61169-11:2017 | Radio-frequency connectors Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9,5 mm with threaded coupling. Characteristic impedance 50 Ω (Type 4,1-9,5) |
| BS EN 61169-39:2011 | Radio-frequency connectors Sectional specification for CQM series quick lock RF connectors |
| BS EN 61169-42:2013 | Radio-frequency connectors Sectional specification for CQN series quick lock RF coaxial connectors |
| BS EN 61169-59:2017 | Radio-frequency connectors Sectional specification for type L32-4 and L32-5 threaded multi-pin radio-frequency connectors |
| BS EN 61169-32:2000 | Radio-frequency connectors RF coaxial connectors with inner diameter of outer conductor 1,85 mm (0,072 in) with screw coupling. Characteristic impedance 50 ohms (type 1,85) |
| BIS IS 5054-8 : 2013 | RADIO FREQUENCY CONNECTORS - PART 8: SECTIONAL SPECIFICATION - RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 6.5 MM (0.256 IN) WITH BAYONET LOCK - CHARACTERISTIC IMPEDANCE 50 (TYPE BNC) |
| BS EN 61169-8:2007 | Radio-frequency connectors Sectional specification. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock. Characteristic impedance 50 ohms (type BNC) |
| 05/30135445 DC : DRAFT JUN 2005 | IEC 61169-8 - RADIO-FREQUENCY CONNECTORS - PART 8: SECTIONAL SPECIFICATION - RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 6,5 MM (0,256 IN) WITH BAYONET LOCK - CHARACTERISTICS IMPEDANCE 50 OHMS (TYPE BNC) |
| I.S. EN 61169-51:2015 | RADIO-FREQUENCY CONNECTORS - PART 51: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTORS 13,5 MM WITH BAYONET LOCK - CHARACTERISTIC IMPEDANCE 50 OHMS (TYPE QLI) |
| 05/30135449 DC : DRAFT JUN 2005 | IEC 61169-16 - RADIO-FREQUENCY CONNECTORS - PART 16: SECTIONAL SPECIFICATION - RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 7 MM (0,276 IN) WITH SCREW COUPLING - CHARACTERISTICS IMPEDANCE 50 OHMS (75 OHMS) (TYPE N) |
| I.S. EN 61169-37:2007 | RADIO-FREQUENCY CONNECTORS - PART 37: SECTIONAL SPECIFICATION FOR STWX8 R.F CONNECTORS |
| I.S. EN 61169-11:2017 | RADIO-FREQUENCY CONNECTORS - PART 11: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 9,5 MM WITH THREADED COUPLING - CHARACTERISTIC IMPEDANCE 50 OHM (TYPE 4,1-9,5) |
| I.S. EN 50173-4:2007 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 4: HOMES |
| NF EN 61169-45 : 2014 | RADIO-FREQUENCY CONNECTORS -PART 45: SECTIONAL SPECIFICATION FOR SERIES SQMA SERIES QUICK LOCK RF COAXIAL CONNECTORS |
| CSA ISO/IEC 15018 : 2005 : R2010 | INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES |
| CSA ISO/IEC 15018:2005 | INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES |
| CSA ISO/IEC 15018 : 2005 : INC : AMD 1 : 2010 : R201000 | INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES |
| I.S. EN 61169-45:2014 | RADIO-FREQUENCY CONNECTORS -PART 45: SECTIONAL SPECIFICATION FOR SERIES SQMA SERIES QUICK LOCK RF COAXIAL CONNECTORS |
| CEI EN 61169-52 : 2016 | RADIO-FREQUENCY CONNECTORS - PART 52: SECTIONAL SPECIFICATION FOR SERIES MMCX RF COAXIAL CONNECTORS |
| NF EN 61169-40 : 2011 | RADIO-FREQUENCY CONNECTORS - PART 40: SECTIONAL SPECIFICATION FOR 2.4 SERIES RF CONNECTORS |
| NF EN 61169-48 : 2015 | RADIO-FREQUENCY CONNECTORS - PART 48: SECTIONAL SPECIFICATION FOR SERIES BMP R.F. COAXIAL CONNECTORS |
| NF EN 61169-39 : 2011 | RADIO-FREQUENCY CONNECTORS - PART 39: SECTIONAL SPECIFICATION FOR CQM SERIES QUICK LOCK RF CONNECTORS |
| UNE-EN 50290-4-1:2016 | Communication cables - Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspects |
| EN 60728-4:2008 | Cable networks for television signals, sound signals and interactive services - Part 4: Passive wideband equipment for coaxial cable networks |
| EN 61169-52:2015 | Radio-frequency connectors - Part 52: Sectional specification for series MMCX RF coaxial connectors |
| EN 61169-14:2010 | Radio-frequency connectors - Part 14: R.F. coaxial connectors with inner diameter of outer conductor 12 mm with screw coupling - Characteristic impedance 75 ohms (Type 3,5/12) |
| EN 61169-50:2015 | Radio-frequency connectors - Part 50: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 4,11 mm with quick lock system - Characteristic impedance 50 Ohm (type QMA) |
| EN 61169-38:2009 | Radio-frequency connectors - Part 38: Sectional specification - Radio frequency coaxial connectors model, slide-in (rack and panel applications) - Characteristic impedance 50 Ω (type TMA) - 50 Ω applications |
| EN 61169-49:2014 | Radio-frequency connectors - Part 49: Sectional specification for SMAA series R.F connectors |
| EN 61169-18:2011 | Radio-frequency connectors - Part 18: Sectional specification - Radio frequency coaxial connectors of type SSMA |
| EN 61169-41:2011 | Radio-frequency connectors - Part 41: Sectional specification for CQA series quick lock R.F. coaxial connectors |
| EN 61169-26:2013 | Radio-frequency connectors - Part 26: Sectional specification for TNCA series RF coaxial connectors |
| EN 61169-19:2011 | Radio-frequency connectors - Part 19: Sectional specification - Radio frequency coaxial connectors of type SSMB |
| EN 61169-42:2013 | Radio-frequency connectors - Part 42: Sectional specification for CQN series quick lock RF coaxial connectors |
| EN 61169-53 : 2016 | Radio-frequency connectors - Part 53: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 16 mm with screw lock - Characteristic impedance 50 Ohm (Type S7-16) |
| EN 60966-1:1999 | Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods |
| EN 61169-2:2007 | Radio-frequency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52 |
| EN 61169-31:1999 | Radio-frequency connectors - Part 31: RF coaxial connectors with inner diameter of outer conductor 1,0 mm (0,039 in) with screw coupling - Characteristic impedance 50 ohms (type 1,0) |
| EN 61169-32 : 1999 | Radio-frequency connectors - Part 32: RF coaxial connectors with inner diameter of outer conductor 1,85 mm (0,072 in) with screw coupling - Characteristic impedance 50 ohms (type 1,85) |
| DEFSTAN 08-107/3(2013) : 2013 | GENERAL REQUIREMENTS FOR THE DESIGN OF ELECTROTECHNICAL AND NAVAL WEAPON EQUIPMENT |
| 11/30241679 DC : 0 | BS EN 61169-43 ED.1 - RADIO-FREQUENCY CONNECTORS - PART 43: SECTIONAL SPECIFICATION FOR RBMA SERIES BLIND MATING RF COAXIAL CONNECTORS |
| 03/313940 DC : DRAFT SEP 2003 | IEC 61169-29 - RADIO-FREQUENCY CONNECTORS - PART 29: MINIATURE R.F. COAXIAL CONNECTORS MODEL SCREW, SNAP-ON, PUSH-PULL OR QUICK-LOCK, SLIDE-IN (RACK AND PANEL APPLICATIONS) - CHARACTERISTIC IMPEDANCE 50 OHMS (TYPE 1,0/2,3) 50 AND 75 OHMS APPLICATIONS |
| BS EN 61169-47:2015 | Radio-frequency connectors Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick) |
| 13/30286795 DC : 0 | BS EN 61169-50 ED1.0 - RADIO-FREQUENCY CONNECTORS - PART 50: SECTIONAL SPECIFICATIONS RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTORS 4.11 MM WITH QUICK LOCK SYSTEM CHARACTERISTICS IMPENDANCE 50 OHM (TYPE QMA) |
| BS EN 61169-48:2015 | Radio-frequency connectors Sectional specification for series BMP R.F. coaxial connectors |
| 15/30328173 DC : 0 | BS EN 61169-59 - RADIO-FREQUENCY CONNECTORS - PART 59: SECTIONAL SPECIFICATION FOR TYPE L32-4 AND L32-5 THREADED MULTI-COAXIAL RADIO-FREQUENCY CONNECTORS |
| 08/30178500 DC : 0 | BS EN 61169-40 - RADIO-FREQUENCY CONNECTORS - PART 40: SECTIONAL SPECIFICATION FOR 2.4 SERIES R.F CONNECTORS |
| BS EN 61169-54:2016 | Radio-frequency connectors Sectional specification for coaxial connectors with 10 mm inner diameter of outer conductor, nominal characteristic impedance 50 Ω, series 4,3-10 |
| 17/30365822 DC : 0 | BS 2SP 157-163:1973+A3:2018 - SPECIFICATION FOR RIVETS, SOLID, UNIVERSAL HEAD, METRIC SIZES ALUMINIUM ALLOYS (COLOUR CODED) AND NICKEL-COPPER ALLOY, CADMIUM PLATED OR NATURAL FINISH |
| I.S. EN 61169-39:2011 | RADIO-FREQUENCY CONNECTORS - PART 39: SECTIONAL SPECIFICATION FOR CQM SERIES QUICK LOCK RF CONNECTORS |
| DD IEC/PAS 61169-41:2009 | Radio-frequency connectors Sectional specification for CQA series quick lock R.F. coaxial connectors |
| BS EN 50173-1:2011 | Information technology. Generic cabling systems General requirements |
| BS EN 61169-24:2009 | Radio-frequency connectors Sectional specification. Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable networks (type F) |
| DD IEC PAS 61169-44 : DRAFT MAY 2010 | RADIO-FREQUENCY CONNECTORS - PART 44: SECTIONAL SPECIFICATION FOR SERIES SMP PUSH-ON RADIO-FREQUENCY COAXIAL CONNECTORS |
| BS EN 61169-31:2000 | Radio-frequency connectors RF coaxial connectors with inner diameter of outer conductor 1,0 mm (0,039 in) with screw coupling. Characteristic impedance 50 ohms (type 1,0) |
| I.S. EN 61169-52:2015 | RADIO-FREQUENCY CONNECTORS - PART 52: SECTIONAL SPECIFICATION FOR SERIES MMCX RF COAXIAL CONNECTORS |
| BS EN 61169-19:2011 | Radio-frequency connectors Sectional specification. Radio frequency coaxial connectors of type SSMB |
| BS EN 61169-50:2015 | Radio-frequency connectors Sectional specification for RF coaxial connectors with inner diameter of outer conductors 4,11 mm with quick lock system. Characteristic impedance 50 Ohm (type QMA) |
| 06/30150081 DC : DRAFT MAY 2006 | IEC 60728-4 - CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 4: PASSIVE WIDEBAND EQUIPMENT FOR COAXIAL CABLE NETWORKS |
| CEI EN 61169-59 : 1ED 2017 | RADIO-FREQUENCY CONNECTORS -PART 59: SECTIONAL SPECIFICATION FOR TYPE L32-4 AND L32-5 THREADED MULTI-PIN RADIO-FREQUENCY CONNECTORS |
| 14/30297690 DC : 0 | BS EN 61169-47 ED 2.0 - RADIO-FREQUENCY CONNECTORS - PART 47: SECTIONAL SPECIFICATION FOR RADIO-FREQUENCY COAXIAL CONNECTORS WITH CLAMP COUPLING, TYPICALLY FOR USE IN 75 [C] CABLE NETWORKS (TYPE F- QUICK) |
| CEI EN 50173-1 : 2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| IEC PAS 61169-39:2008 | Radio-frequency connectors - Part 39: Sectional specification for CQM series quick lock RF connectors |
| IEC PAS 61169-44:2010 | Radio-frequency connectors - Part 44: Sectional specification for SMP push-on radio-frequency coaxial connectors |
| I.S. EN 61169-58:2016 | RADIO-FREQUENCY CONNECTORS - PART 58: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH BLIND-MATE COUPLING - CHARACTERISTIC IMPEDANCE 50 OHMS (TYPE SBMA) |
| I.S. EN 61169-53:2016 | RADIO-FREQUENCY CONNECTORS - PART 53: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 16 MM WITH SCREW LOCK - CHARACTERISTIC IMPEDANCE 50 OHM (TYPE S7-16) |
| EN 50173-1:2011 | Information technology - Generic cabling systems - Part 1: General requirements |
| IEC PAS 61169-41:2009 | Radio-frequency connectors - Part 41: Sectional specification for CQA series quick lock R.F. coaxial connectors |
| I.S. EN 61169-40:2011 | RADIO-FREQUENCY CONNECTORS - PART 40: SECTIONAL SPECIFICATION FOR 2.4 SERIES RF CONNECTORS |
| IEC PAS 61169-38:2007 | Radio-frequency connectors - Part 38: Sectional specification - Radio-frequency coaxial connectors model, slide-in (rack and panel applications) - Characteristic impedance 50 Ω (type TMA) - 50 Ω applications |
| IEC PAS 61169-40:2008 | Radio-frequency connectors - Part 40: Sectional specification for 2.4 series R.F connectors |
| IEC 61169-38:2008 | Radio-frequency connectors - Part 38: Sectional specification - Radio frequency coaxial connectors model, slide-in (rack and panel applications) - Characteristic impedance 50 Ω (type TMA) - 50 Ω applications |
| IEC 61169-31:1999 | Radio frequency connectors - Part 31: RF coaxial with inner diameter of outer conductor 1,0 mm (0,039 in) with screw coupling - Characteristic impedance 50 ohms (type 1,0) |
| I.S. EN 50173-1:2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| NF EN 61169-49 : 2015 | RADIO-FREQUENCY CONNECTORS - PART 49: SECTIONAL SPECIFICATION FOR SMAA SERIES R.F CONNECTORS |
| 14/30311689 DC : 0 | BS EN 61169-11 ED 1.0 - RADIO-FREQUENCY CONNECTORS - PART 11: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 9.5 MM WITH THREADED COUPLING - CHARACTERISTIC IMPEDANCE 50 OHM (TYPE 4.1-9.5) |
| DD IEC PAS 61169-39 : DRAFT JUNE 2008 | RADIO-FREQUENCY CONNECTORS - PART 39: SECTIONAL SPECIFICATION FOR CQM SERIES QUICK LOCK RF CONNECTORS |
| 14/30311685 DC : 0 | BS EN 61169-58 ED 1.0 - RADIO-FREQUENCY CONNECTORS - PART 58: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH BLIND-MATE COUPLING - CHARACTERISTIC IMPEDANCE 50 OHM (TYPE SBMA) |
| I.S. EN 61169-50:2015 | RADIO-FREQUENCY CONNECTORS - PART 50: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTORS 4,11 MM WITH QUICK LOCK SYSTEM - CHARACTERISTIC IMPEDANCE 50 OHM (TYPE QMA) |
| 13/30277366 DC : 0 | BS EN 61169-49 ED 1.0 - RADIO-FREQUENCY CONNECTORS - PART 49: SECTIONAL SPECIFICATION FOR SMAA SERIES R.F CONNECTORS |
| DD IEC/PAS 61169-4:2006 | Radio-frequency connectors Sectional specification. Radio-frequency coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw lock. Characteristic impedance 50 Ω (type 7-16) |
| BS EN 60728-4:2008 | Cable networks for television signals, sound signals and interactive services Passive wideband equipment for coaxial cable networks |
| 09/30191414 DC : 0 | BS EN 61169-19 - RADIO-FREQUENCY CONNECTORS - PART 19: SECTIONAL SPECIFICATION - RADIO-FREQUENCY COAXIAL CONNECTORS OF TYPE SSMB |
| DD IEC PAS 61169-19 : DRAFT MAY 2009 | RADIO-FREQUENCY CONNECTORS - PART 19: SECTIONAL SPECIFICATION FOR SSMB SERIES R.F. COAXIAL CONNECTORS |
| NF EN 61169-11 : 2017 | RADIO-FREQUENCY CONNECTORS - PART 11: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 9,5 MM WITH THREADED COUPLING - CHARACTERISTIC IMPEDANCE 50 OHM (TYPE 4,1-9,5) |
| 09/30191421 DC : 0 | BS EN 61169-35 - RADIO-FREQUENCY CONNECTORS - PART 35: SECTIONAL SPECIFICATION - RADIO FREQUENCY COAXIAL CONNECTORS OF TYPE 2,92 |
| 17/30363062 DC : 0 | BS EN 61169-1-4 - RADIO-FREQUENCY CONNECTORS - PART 1-4: ELECTRICAL TEST METHODS - VOLTAGE STANDING WAVE RATIO, RETURN LOSS AND REFLECTION COEFFICIENT |
| 13/30282685 DC : 0 | BS EN 61169-51 ED.1 - RADIO-FREQUENCY CONNECTORS - PART 51: SECTIONAL SPECIFICATIONS RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTORS 13.5 MM WITH BAYONET LOCK CHARACTERISTICS IMPEDAMCE 50 OHM (TYPE QLI) |
| 11/30244711 DC : 0 | BS EN 61169-47 ED.1 - RADIO-FRQUENCY CONNECTORS - PART 47: SECTIONAL SPECIFICATION - RADIO FREQUENCY COAXIAL CONNECTORS WITH CLAMP COUPLING, TYPICALLY FOR USE IN 75 OHMS CABLE NETWORKS (TYPE F-QUICK) |
| BS EN 61169-36:1997 | Radio-frequency connectors Microminiature r.f. coaxial connectors with snap-on coupling. Characteristic impedance 50 ohms (type MCX) |
| EN 61169-11:2017 | Radio-frequency connectors - Part 11: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9,5 mm with threaded coupling - Characteristic impedance 50 Ω (type 4,1-9,5) |
| BS EN 61169-29:2005 | Radio-frequency connectors Sectional specification. Miniature radio frequency coaxial connectors model screw, snap-on, push-pull or quick-lock, slide-in (rack and panel applications). Characterisctic impedance 50 ohms (type 1,0/2,3). 50 ohms and 75 ohms applications |
| BS EN 50290-4-1:2014 | Communication cables General considerations for the use of cables. Environmental conditions and safety aspects |
| I.S. EN 61169-44:2013 | RADIO-FREQUENCY CONNECTORS - PART 44: SECTIONAL SPECIFICATION FOR SERIES SMP PUSH-ON RADIO-FREQUENCY COAXIAL CONNECTORS (IEC 61169-44:2012 (EQV)) |
| I.S. EN 61169-41:2011 | RADIO-FREQUENCY CONNECTORS - PART 41: SECTIONAL SPECIFICATION FOR CQA SERIES QUICK LOCK R.F. COAXIAL CONNECTORS |
| I.S. EN 61169-18:2011 | RADIO-FREQUENCY CONNECTORS - PART 18: SECTIONAL SPECIFICATION - RADIO FREQUENCY COAXIAL CONNECTORS OF TYPE SSMA |
| I.S. EN 61169-36:1999 | RADIO-FREQUENCY CONNECTORS - PART 36: MICROMINIATURE R.F. COAXIAL CONNECTORS WITH SNAP-ON COUPLING - CHARACTERISTIC IMPEDANCE 50 OHM (TYPE MCX) |
| I.S. EN 61169-14:2010 | RADIO-FREQUENCY CONNECTORS - PART 14: R.F. COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 12 MM WITH SCREW COUPLING - CHARACTERISTIC IMPEDANCE 75 OHMS (TYPE 3,5/12) |
| IEC PAS 61169-43:2010 | Radio-frequency connectors - Part 43: Sectional specification for RBMA series blind mating RF coaxial connectors |
| DIN EN 61169-11 : 2018-01 | RADIO-FREQUENCY CONNECTORS - PART 11: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 9,5 MM WITH THREADED COUPLING - CHARACTERISTIC IMPEDANCE 50 OHM (TYPE 4,1-9,5) (IEC 61169-11:2017) |
| VDE 0887-969-11 : 2018-01 | RADIO-FREQUENCY CONNECTORS - PART 11: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 9,5 MM WITH THREADED COUPLING - CHARACTERISTIC IMPEDANCE 50 OHM (TYPE 4,1-9,5) (IEC 61169-11:2017) |
| I.S. EN 61169-35:2011 | RADIO-FREQUENCY CONNECTORS - PART 35: SECTIONAL SPECIFICATION FOR 2,92 SERIES RF CONNECTORS |
| EN 50173-4 : 2007 AMD 2 2012 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 4: HOMES |
| NF EN 61169-54 : 2017 | RADIO-FREQUENCY CONNECTORS - PART 54: SECTIONAL SPECIFICATION FOR COAXIAL CONNECTORS WITH 10 MM INNER DIAMETER OF OUTER CONDUCTOR, NOMINAL CHARACTERISTIC IMPEDANCE 50 OMEGA, SERIES 4,3-10 |
| ISO/IEC 15018:2004 | Information technology Generic cabling for homes |
| I.S. EN 61169-2:2007 | RADIO-FREQUENCY CONNECTORS - PART 2: SECTIONAL SPECIFICATION - RADIO FREQUENCY COAXIAL CONNECTORS OF TYPE 9,52 |
| I.S. EN 50290-4-1:2014 | COMMUNICATION CABLES - PART 4-1: GENERAL CONSIDERATIONS FOR THE USE OF CABLES - ENVIRONMENTAL CONDITIONS AND SAFETY ASPECTS |
| IEC PAS 61169-18:2009 | Radio-frequency connectors - Part 18: Sectional specification - Radio frequency coaxial connectors of type SSMA |
| IEC PAS 61169-42:2009 | Radio-frequency connectors - Part 42: Sectional specification for CQN series quick lock RF coaxial connectors |
| IEC 61169-41:2011 | Radio-frequency connectors - Part 41: Sectional specification for CQA series quick lock R.F. coaxial connectors |
| IEC 61169-19:2011 | Radio-frequency connectors - Part 19: Sectional specification - Radio frequency coaxial connectors of type SSMB |
| EN 61169-51:2015 | Radio-frequency connectors - Part 51: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 13,5 mm with bayonet lock - Characteristic impedance 50 Ohm (type QLI) |
| I.S. EN 61169-48:2015 | RADIO-FREQUENCY CONNECTORS - PART 48: SECTIONAL SPECIFICATION FOR SERIES BMP R.F. COAXIAL CONNECTORS |
| BS EN 61169-49:2014 | Radio-frequency connectors Sectional specification for SMAA series R.F connectors |
| BS EN 61169-37:2007 | Radio-frequency connectors Sectional specification for STWX8 R.F connectors |
| 06/30148192 DC : 0 | BS EN 61169-4:2007 - RADIO-FREQUENCY CONNECTORS - PART 4: R. F. COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 16 MM (0.63 IN) WITH SCREW LOCK - CHARACTERISTIC IMPEDANCE 50 OHMS (TYPE 7-16) |
| 14/30296065 DC : 0 | BS EN 61169-52 ED.1.0 - RADIO-FREQUENCY CONNECTORS - PART 52: SECTIONAL SPECIFICATION FOR SERIES MMCX RF COAXIAL CONNECTORS |
| BS EN 61169-18:2011 | Radio-frequency connectors Sectional specification. Radio frequency coaxial connectors of type SSMA |
| NF EN 61169-50 : 2015 | RADIO-FREQUENCY CONNECTORS - PART 50: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTORS 4,11 MM WITH QUICK LOCK SYSTEM - CHARACTERISTIC IMPEDANCE 50 OHM (TYPE QMA) |
| 05/30122865 DC : DRAFT JUN 2005 | IEC 61169-2 ED 2 - RADIO-FREQUENCY CONNECTORS - PART 2: SECTIONAL SPECIFICATION - RADIO FREQUENCY COAXIAL CONNECTORS OF TYPE 9,52 |
| CEI EN 60728-4 : 2008 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 4: PASSIVE WIDEBAND EQUIPMENT FOR COAXIAL CABLE NETWORKS |
| 17/30363106 DC : DRAFT SEP 2017 | BS IEC 63138-1 ED.1.0 - MULTI-RADIO FREQUENCY CHANNEL CONNECTORS - PART 1: GENERIC SPECIFICATION-GENERAL REQUIREMENTS AND MEASURING METHODS |
| I.S. EN 61169-29:2005 | RADIO-FREQUENCY CONNECTORS - PART 29: SECTIONAL SPECIFICATION - MINIATURE RADIO FREQUENCY COAXIAL CONNECTORS MODEL SCREW, SNAP-ON, PUSH-PULL OR QUICK-LOCK, SLIDE-IN (RACK AND PANEL APPLICATIONS) - CHARACTERISTIC IMPEDANCE 50 OHMS (TYPE 1,0/2,3) - 50 OHMS AND 75 OHMS APPLICATIONS |
| BS EN 61169-16:2007 | Radio-frequency connectors Sectional specification. RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling. Characteristic impedance 50 ohms (75 ohms) (type N) |
| I.S. EN 61169-42:2013 | RADIO-FREQUENCY CONNECTORS - PART 42: SECTIONAL SPECIFICATION FOR CQN SERIES QUICK LOCK RF COAXIAL CONNECTORS (IEC 61169-42:2013 (EQV)) |
| 07/30164148 DC : 0 | BS EN 61169-38 - RADIO-FREQUENCY CONNECTORS - PART 38: SECTIONAL SPECIFICATION - RADIO FREQUENCY COAXIAL CONNECTORS MODEL, SLIDE-IN (RACK AND PANEL APPLICATIONS) - CHARACTERISTIC IMPEDANCE 50 (TYPE TMA) - 50 APPLICATIONS |
| CEI EN 60966-1 : 2001 | RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 1: GENERIC SPECIFICATION GENERAL REQUIREMENTS AND TEST METHODS |
| BS EN 61169-45:2014 | Radio-frequency connectors Sectional specification for series SQMA series quick lock RF coaxial connectors |
| BS EN 61169-40:2011 | Radio-frequency connectors Sectional specification for 2.4 series RF connectors |
| DD IEC PAS 61169-40 : DRAFT SEP 2008 | RADIO-FREQUENCY CONNECTORS - PART 40: SECTIONAL SPECIFICATION FOR 2.4 SERIES R.F CONNECTORS |
| BS EN 61169-38:2009 | Radio-frequency connectors Sectional specification. Radio frequency coaxial connectors model, slide-in (rack and panel applications). Characteristic impedance 50 ohms (type TMA). 50 ohms applications |
| DD IEC PAS 61169-35 : DRAFT MAY 2009 | RADIO-FREQUENCY CONNECTORS - PART 35: SECTIONAL SPECIFICATION - RADIO FREQUENCY COAXIAL CONNECTORS OF TYPE 2,92 |
| 16/30325971 DC : 0 | BS ISO/IEC 11801-1 - INFORMATION TECHNOLOGY - GENERIC CABLING FOR CUSTOMER PREMISES - PART 1: GENERAL REQUIREMENTS |
| NF EN 61169-14 : 2011 | RADIO-FREQUENCY CONNECTORS - PART 14: R.F. COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 12 MM WITH SCREW COUPLING - CHARACTERISTIC IMPEDANCE 75 OHMS (TYPE 3,5/12) |
| 09/30191398 DC : 0 | BS EN 61169-18 - RADIO-FREQUENCY CONNECTORS - PART 18: SECTIONAL SPECIFICATION - RADIO-FREQUENCY COAXIAL CONNECTORS OF TYPE SSMA |
| NF EN 61169-53 : 2016 | RADIO-FREQUENCY CONNECTORS - PART 53: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 16 MM WITH SCREW LOCK - CHARACTERISTIC IMPEDANCE 50 OHM (TYPE S7-16) |
| 09/30191428 DC : 0 | BS EN 61169-41 - RADIO-FREQUENCY CONNECTORS - PART 41: SECTIONAL SPECIFICATION FOR CQA SERIES QUICK LOCK R.F. COAXIAL CONNECTORS |
| NF EN 61169-19 : 2011 | RADIO-FREQUENCY CONNECTORS - PART 19: SECTIONAL SPECIFICATION - RADIO FREQUENCY COAXIAL CONNECTORS OF TYPE SSMB |
| 17/30363074 DC : 0 | BS EN 61169-1-2 - RADIO-FREQUENCY CONNECTORS - PART 1-2: ELECTRICAL TEST METHODS - INSERTION LOSS |
| I.S. EN 61169-49:2014 | RADIO-FREQUENCY CONNECTORS - PART 49: SECTIONAL SPECIFICATION FOR SMAA SERIES R.F CONNECTORS |
| I.S. EN 61169-16:2007 | RADIO-FREQUENCY CONNECTORS - PART 16: SECTIONAL SPECIFICATION - RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 7 MM (0,276 IN) WITH SCREW COUPLING - CHARACTERISTIC IMPEDANCE 50 OHMS (75 OHMS) (TYPE N) |
| I.S. EN 61169-26:2013 | RADIO-FREQUENCY CONNECTORS - PART 26: SECTIONAL SPECIFICATION FOR TNCA SERIES RF COAXIAL CONNECTORS (IEC 61169-26:2013 (EQV)) |
| EN 61169-59:2017 | Radio-frequency connectors - Part 59: Sectional specification for type L32-4 and L32-5 threaded multi-pin radio-frequency connectors |
| CEI EN 61169-11 : 1ED 2017 | RADIO-FREQUENCY CONNECTORS - PART 11: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 9,5 MM WITH THREADED COUPLING - CHARACTERISTIC IMPEDANCE 50 OHM (TYPE 4,1-9,5) |
| I.S. EN 61169-38:2009 | RADIO-FREQUENCY CONNECTORS - PART 38: SECTIONAL SPECIFICATION - RADIO FREQUENCY COAXIAL CONNECTORS MODEL, SLIDE-IN (RACK AND PANEL APPLICATIONS) - CHARACTERISTIC IMPEDANCE 50 OHMS (TYPE TMA) - 50 OHMS APPLICATIONS |
| IEC 61169-4:2008 | Radio-frequency connectors - Part 4: RF coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw lock - Characteristic impedance 50 Ω (type 7-16) |
| IEC PAS 61169-35:2009 | Radio-frequency connectors - Part 35: Sectional specification - Radio frequency coaxial connectors of type 2,92 |
| IEC PAS 61169-19:2009 | Radio-frequency connectors - Part 19: Sectional specification for SSMB series R.F. coaxial connectors |
| EN 61169-54:2016 | Radio-frequency connectors - Part 54: Sectional specification for coaxial connectors with 10 mm inner diameter of outer conductor, nominal characteristic impedance 50 Ω, series 4,3-10 |
| IEC 61169-48:2014 | Radio-frequency connectors - Part 48: Sectional specification for series BMP R.F. coaxial connectors |
| IEC 61169-40:2010 | Radio-frequency connectors - Part 40: Sectional specification for 2.4 series RF connectors |
| IEC 61169-14:2010 | Radio-frequency connectors - Part 14: R.F. coaxial connectors with inner diameter of outer conductor 12 mm with screw coupling - Characteristic impedance 75 ohms (Type 3,5/12) |
| IEC 61169-32:1999 | Radio-frequency connectors - Part 32: RF coaxial connectors with inner diameter of outer conductor 1,85 mm (0,072 in) with screw coupling - Characteristic impedance 50 ohms (type 1,85) |
| IEC 60728-4:2007 | Cable networks for television signals, sound signals and interactive services - Part 4: Passive wideband equipment for coaxial cable networks |
| IEC 61169-18:2011 | Radio-frequency connectors - Part 18: Sectional specification - Radio frequency coaxial connectors of type SSMA |
| IEC 61169-50:2014 | Radio-frequency connectors - Part 50: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 4,11 mm with quick lock system - Characteristics impedance 50 Ohm (type QMA) |
| IEC 61169-47:2015 | Radio-frequency connectors - Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick) |
| IEC 60966-1:1999 | Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods |
| IEC 61169-49:2014 | Radio-frequency connectors - Part 49: Sectional specification for SMAA series R.F. connectors |
| IEC 61169-53:2015 | Radio-frequency connectors - Part 53: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 16 mm with screw lock - Characteristic impedance 50 Ω (Type S7-16) |
| IEC 61169-39:2009 | Radio-frequency connectors - Part 39: Sectional specification for CQM series quick lock RF connectors |
| IEC 61169-37:2007 | Radio-frequency connectors - Part 37: Sectional specification - STWX8 R.F. connectors |
| IEC 61169-45:2014 | Radio-frequency connectors - Part 45: Sectional specification for SQMA series quick lock RF coaxial connectors |
| IEC 61169-8:2007 | Radio-frequency connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 Ω (type BNC) |
| IEC 61169-43:2013 | Radio-frequency connectors - Part 43: Sectional specification for RBMA series blind mating RF coaxial connectors |
| IEC 61169-16:2006 | Radio-frequency connectors - Part 16: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling - Characteristics impedance 50 ohms (75 ohms) (type N) |
| IEC 61169-36:1996 | Radio-frequency connectors - Part 36: Microminiature r.f. connectors with snap-on coupling - Characteristic impedance 50 Ohms (Type MCX) |
| IEC 61169-35:2011 | Radio-frequency connectors - Part 35: Sectional specification for 2,92 series RF connectors |
| IEC 61169-2:2007 | Radio-frenquency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52 |
| IEC 61169-26:2013 | Radio-frequency connectors - Part 26: Sectional specification for TNCA series RF coaxial connectors |
| IEC 61169-52:2015 | Radio-frequency connectors - Part 52: Sectional specification for series MMCX RF coaxial connectors |
| IEC 61169-51:2015 | Radio-frequency connectors - Part 51: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 13,5 mm with bayonet lock - Characteristic impedance 50 Ω (type QLI) |
| IEC 61169-42:2013 | Radio-frequency connectors - Part 42: Sectional specification for CQN series quick lock RF coaxial connectors |
| EN 61169-36 : 1997 | Radio-frequency connectors - Part 36: Sectional specification for microminiature r.f. coaxial connectors with snap-on coupling - Characteristic impedance 50 ohm (type MCX) |
| NF EN 61169-51 : 2015 | RADIO-FREQUENCY CONNECTORS - PART 51: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTORS 13,5 MM WITH BAYONET LOCK - CHARACTERISTIC IMPEDANCE 50 OHMS (TYPE QLI) |
| 13/30290327 DC : 0 | BS EN 61169-45 ED 1.0 - RADIO-FREQUENCY CONNECTORS - PART 45: SECTIONAL SPECIFICATION FOR SERIES SQMA SERIES QUICK LOCK RF COAXIAL CONNECTORS |
| NF EN 61169-18 : 2011 | RADIO-FREQUENCY CONNECTORS - PART 18: SECTIONAL SPECIFICATION - RADIO FREQUENCY COAXIAL CONNECTORS OF TYPE SSMA |
| 17/30367379 DC : 0 | BS EN 61169-24 ED.3.0 - RADIO-FREQUENCY CONNECTORS - PART 24: SECTIONAL SPECIFICATION - RADIO FREQUENCY COAXIAL CONNECTORS WITH SCREW COUPLING, TYPICALLY FOR USE IN 75 OHMS CABLE NETWORKS (TYPE F) |
| I.S. EN 61169-54:2016 | RADIO-FREQUENCY CONNECTORS - PART 54: SECTIONAL SPECIFICATION FOR COAXIAL CONNECTORS WITH 10 MM INNER DIAMETER OF OUTER CONDUCTOR, NOMINAL CHARACTERISTIC IMPEDANCE 50 OHMS, SERIES 4,3-10 |
| I.S. EN 61169-59:2017 | RADIO-FREQUENCY CONNECTORS - PART 59: SECTIONAL SPECIFICATION FOR TYPE L32-4 AND L32-5 THREADED MULTI-PIN RADIO-FREQUENCY CONNECTORS |
| BS EN 61169-26:2013 | Radio-frequency connectors Sectional specification for TNCA series RF coaxial connectors |
| 09/30196463 DC : 0 | BS EN 61169-14 - RADIO-FREQUENCY CONNECTORS - PART 14: R.F. COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR WITH 12 MM (0.472 IN) WITH SCREW COUPLING - CHARACTERISTIC IMPEDANCE 75 OHMS (TYPE 3.5/12) |
| CEI EN 61169-58 : 1ED 2017 | RADIO-FREQUENCY CONNECTORS - PART 58: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH BLIND-MATE COUPLING - CHARACTERISTIC IMPEDANCE 50 OHMS (TYPE SBMA) |
| BS EN 61169-43:2013 | Radio-frequency connectors Sectional specification for RBMA series blind mating RF coaxial connectors |
| 13/30291609 DC : 0 | BS EN 60966-1 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND TEST METHODS |
| DD IEC PAS 61169-18 : DRAFT MAY 2009 | RADIO-FREQUENCY CONNECTORS - PART 18: SECTIONAL SPECIFICATION - RADIO FREQUENCY COAXIAL CONNECTORS OF TYPE SSMA |
| NF EN 61169-58 : 2017 | RADIO-FREQUENCY CONNECTORS - PART 58: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH BLIND-MATE COUPLING - CHARACTERISTIC IMPEDANCE 50 OMEGA (TYPE SBMA) |
| BS EN 61169-58:2016 | Radio-frequency connectors Sectional specification for RF coaxial connectors with blind-mate coupling. Characteristic impedance 50 Ω (type SBMA) |
| 14/30309672 DC : 0 | BS EN 61169-54 ED 1.0 - RADIO-FREQUENCY CONNECTORS - PART 54: SECTIONAL SPECIFICATION FOR COAXIAL CONNECTORS WITH 10 MM INNER DIAMETER OF OUTER CONDUCTOR, NOMINAL CHARACTERISTIC IMPEDANCE 50 OHMS, SERIES 4.3-10 |
| 14/30311693 DC : 0 | BS EN 61169-53 ED 1.0 - RADIO-FREQUENCY CONNECTORS - PART 53: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 16 MM WITH SCREW LOCK - CHARACTERISTIC IMPEDANCE 50 OHM (TYPE S7-16) |
| BS EN 61169-14:2010 | Radio-frequency connectors R.F. coaxial connectors with inner diameter of outer conductor 12 mm with screw coupling. Characteristic impedance 75 ohms (Type 3,5/12) |
| 07/30160570 DC : 0 | BS EN 61169-24 - RADIO-FREQUENCY CONNECTORS - PART 24: SECTIONAL SPECIFICATION - RADIO FREQUENCY COAXIAL CONNECTORS WITH SCREW COUPLING, TYPICALLY FOR USE IN 75 OHM CABLE DISTRIBUTION SYSTEMS (TYPE F) |
| BS EN 61169-52:2015 | Radio-frequency connectors Sectional specification for series MMCX RF coaxial connectors |
| BS EN 61169-2:2007 | Radio-frequency connectors Sectional specification. Radio frequency coaxial connectors of type 9,52 |
| BS EN 61169-53:2016 | Radio-frequency connectors Sectional specification for RF coaxial connectors with inner diameter of outer conductor 16 mm with screw lock. Characteristic impedance 50 O (Type S7-16) |
| 08/30177612 DC : DRAFT MAY 2008 | BS EN 61169-39 - RADIO-FREQUENCY CONNECTORS - PART 39: SECTIONAL SPECIFICATION FOR CQM SERIES QUICK LOCK RF CONNECTORS |
| NF EN 61169-47 : 2018 | RADIO-FREQUENCY CONNECTORS - PART 47: SECTIONAL SPECIFICATION FOR RADIO-FREQUENCY COAXIAL CONNECTORS WITH CLAMP COUPLING, TYPICALLY FOR USE IN 75 OMEGA CABLE NETWORKS (TYPE F-QUICK) |
| IEC PAS 61169-4:2006 | Radio-frequency connectors - Part 4: Sectional specification - Radio-frequency coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw lock - Characteristic impedance 50 ohms (type 7-16) |
| CSA ISO/IEC 15018 : 2005 : INC : AMD 1 : 2010 : R2015 | INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES |
| I.S. EN 61169-43:2013 | RADIO-FREQUENCY CONNECTORS - PART 43: SECTIONAL SPECIFICATION FOR RBMA SERIES BLIND MATING RF COAXIAL CONNECTORS (IEC 61169-43:2013 (EQV)) |
| TR 102 994 : 1.1.1 | ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); IN HOME CABLING FOR INTEGRATED BROADBAND CABLE AND TELEVISION SERVICES |
| I.S. EN 61169-8:2007 | RADIO-FREQUENCY CONNECTORS - PART 8: SECTIONAL SPECIFICATION - RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 6,5 MM (0,256 IN) WITH BAYONET LOCK - CHARACTERISTICS IMPEDANCE 50 OHMS (TYPE BNC) |
| NF EN 61169-52 : 2018 | RADIO-FREQUENCY CONNECTORS - PART 52: SECTIONAL SPECIFICATION FOR MMCX SERIES RF COAXIAL CONNECTORS |
| I.S. EN 60728-4:2008 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 4: PASSIVE WIDEBAND EQUIPMENT FOR COAXIAL CABLE NETWORKS |
| CEI EN 61169-54 : 1ED 2017 | RADIO-FREQUENCY CONNECTORS - PART 54: SECTIONAL SPECIFICATION FOR COAXIAL CONNECTORS WITH 10 MM INNER DIAMETER OF OUTER CONDUCTOR, NOMINAL CHARACTERISTIC IMPEDANCE 50 OHMS, SERIES 4,3-10 |
| BS EN 50173-4 : 2007 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 4: HOMES |
| IEC 61169-11:2017 | Radio-frequency connectors - Part 11: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9,5 mm with threaded coupling - characteristic impedance 50 Ω (Type 4,1-9,5) |
| IEC 61169-29:2005 | Radio-frequency connectors - Part 29: Sectional specification - Miniature radio frequency coaxial connectors model screw, snap-on, push-pull or quick-lock, slide-in (rack and panel applications) - Characteristic impedance 50 Ω (type 1,0/2,3) - 50 Ω and 75 Ω applications |
| IEC 61169-44:2012 | Radio-frequency connectors - Part 44: Sectional specification for series SMP push-on radio-frequency coaxial connectors |
| IEC 61169-24:2009 | Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 Ω cable networks (type F) |
| EN 61169-39:2011 | Radio-frequency connectors - Part 39: Sectional specification for CQM series quick lock RF connectors |
| EN 61169-44:2013 | Radio-frequency connectors - Part 44: Sectional specification for series SMP push-on radio-frequency coaxial connectors |
| EN 61169-24:2009 | Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable networks (type F) |
| EN 61169-8:2007 | Radio-frequency connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 ohms (type BNC) |
| EN 50290-4-1:2014 | Communication cables - Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspects |
| EN 61169-29:2005 | Radio-frequency connectors - Part 29: Sectional specification - Miniature radio frequency coaxial connectors model screw, snap-on, push-pull or quick-lock, slide-in (rack and panel applications) - Characteristic impedance 50 ohms (type 1,0/2,3) - 50 omhs and 75 ohms applications |
| EN 61169-16:2007 | Radio-frequency connectors - Part 16: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling - Characteristic impedance 50 ohms (75 ohms) (type N) |
| EN 61169-45:2014 | Radio-frequency connectors -Part 45: Sectional specification for series SQMA series quick lock RF coaxial connectors |
| EN 61169-35 : 2011 | RADIO-FREQUENCY CONNECTORS - PART 35: SECTIONAL SPECIFICATION FOR 2,92 SERIES RF CONNECTORS |
| EN 61169-48 : 2015 | Radio-frequency connectors - Part 48: Sectional specification for series BMP R.F. coaxial connectors |
| EN 61169-47:2015 | Radio-frequency connectors - Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick) |
| EN 61169-37:2007 | Radio-frequency connectors - Part 37: Sectional specification for STWX8 R.F connectors |
| EN 61169-43:2013 | Radio-frequency connectors - Part 43: Sectional specification for RBMA series blind mating RF coaxial connectors |
| EN 61169-58:2016/AC:2017-09 | Radio-frequency connectors - Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling - Characteristic impedance 50 Ω (type SBMA) |
| EN 61169-40:2011 | Radio-frequency connectors - Part 40: Sectional specification for 2.4 series RF connectors |
| IEC 60457-1:1974 | Rigid precision coaxial and their associated precision connectors. Part 1: General requirements and measuring methods |
| ISO 5459:2011 | Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| IEC 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
| IEC 60096-2:1961 | Radio-frequency cables - Part 2: Relevant cable specifications |
| IEC 60068-2-13:1983 | Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure |
| IEC 60068-2-11:1981 | Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist |
| ISO 2859-0:1995 | Sampling procedures for inspection by attributes — Part 0: Introduction to the ISO 2859 attribute sampling system |
| IEC 60410:1973 | Sampling plans and procedures for inspection by attributes |
| ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
| IEC 60068-2-54:2006 | Environmental testing - Part 2-54: Tests - Test Ta: Solderability testing of electronic components by the wetting balance method |
| IEC 60068-2-17:1994 | Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing |
| ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 60068-2-61:1991 | Environmental testing - Part 2-61: Test methods - Test Z/ABDM:Climatic sequence |
| ISO 2015:1976 | Numbering of weeks |
| IEC 60068-2-42:2003 | Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections |
| ISO 129-1:2004 | Technical drawings Indication of dimensions and tolerances Part 1: General principles |
| IEC 60068-2-29:1987 | Environmental testing. Part 2: Tests. Test Eb and guidance: Bump |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| IEC 60068-2-52:2017 | Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) |
| IEC 61726:2015 | Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
£281.44
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - English - French
PDF - English - French
PDF 3 Users - English - French
PDF 5 Users - English - French
PDF 9 Users - English - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.