IEC 61290-3:2008
Current
Current
The latest, up-to-date edition.
Optical amplifiers - Test methods - Part 3: Noise figure parameters
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English - French
Published date
13-08-2008
Publisher
FOREWORD
INTRODUCTION
1 Scope and object
2 Normative references
3 Acronyms and abbreviations
4 Noise figure generalities
5 Noise figure contributions
6 Noise figure test methods
Bibliography
IEC 61290-3:2008 applies to all commercially available optical amplifiers (OAs), including OAs using optically pumped fibres (OFAs based on either rare-earth doped fibres or on the Raman effect), semiconductor optical amplifiers (SOAs) and planar waveguide optical amplifiers (PWOAs). The object of this standard is to provide the general background for OA noise figure parameters measurements and to indicate those IEC standard test methods for accurate and reliable measurements of OA parameters, as defined in IEC 61291-1. This edition includes updates to specifically address additional types of optical amplifiers and to highlight that the IEC 61290-3 series pertains to single-channel amplifiers. References have been added to the documents pertaining to multichannel amplifiers.
| Committee |
TC 86/SC 86C
|
| DevelopmentNote |
Stability Date: 2021. (11/2017)
|
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN EN IEC 61290-3 : 2008 | Identical |
| I.S. EN 61290-3:2008 | Identical |
| SANS 61290-3 : 2ED 2009 | Identical |
| BS EN 61290-3:2008 | Identical |
| EN 61290-3:2008 | Identical |
| DIN EN 61290-3:2009-03 | Identical |
| JIS C 6122-3:2011 | Identical |
| CEI EN 61290-3 : 2010 | Identical |
| SANS 61290-3:2009(R2021) | Identical |
| PN EN 61290-3 : 2009 | Identical |
| UNE-EN 61290-3:2008 | Identical |
| CEI EN 61290-10-4 : 2008 | OPTICAL AMPLIFIERS - TEST METHODS - PART 10-4: MULTICHANNEL PARAMETERS - INTERPOLATED SOURCE SUBTRACTION METHOD USING AN OPTICAL SPECTRUM ANALYZER |
| I.S. EN 61290-3-2:2008 | OPTICAL AMPLIFIERS - TEST METHODS - PART 3-2: NOISE FIGURE PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD |
| 06/30154856 DC : DRAFT AUG 2006 | EN 61291-2 - OPTICAL AMPLIFIERS - PART 2: DIGITAL APPLICATIONS - PERFORMANCE SPECIFICATION TEMPLATE |
| 07/30170378 DC : DRAFT AUG 2007 | BS EN 61290-10-1 - OPTICAL AMPLIFIER TEST METHODS - PART 10-1: MULTICHANNEL PARAMETERS - PULSE METHOD USING AN OPTICAL SWITCH AND OPTICAL SPECTRUM ANALYZER |
| I.S. EN IEC 61291-1:2018 | OPTICAL AMPLIFIERS - PART 1: GENERIC SPECIFICATION |
| EN 61290-5-3:2002 | Optical fibre amplifiers - Basic specification - Part 5-3: Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser |
| BS EN 61290-3-2:2008 | Optical amplifiers. Test methods Noise figure parameters. Electrical spectrum analyzer method |
| BS EN 61290-3-3:2014 | Optical amplifiers. Test methods Noise figure parameters. Signal power to total ASE power ratio |
| PD IEC/TR 61292-6:2010 | Optical amplifiers Distributed Raman amplification |
| BS EN 61290-5-3:2002 | Optical fibre amplifiers. Basic specification. Test methods for reflectance parameters Reflectance tolerance using an electrical spectrum analyser |
| I.S. EN 61290-3-3:2014 | OPTICAL AMPLIFIERS - TEST METHODS - PART 3-3: NOISE FIGURE PARAMETERS - SIGNAL POWER TO TOTAL ASE POWER RATIO |
| 98/261559 DC : DRAFT MAY 1998 | IEC 61290-3 EDITION 1 - BASIC SPECIFICATION FOR OPTICAL FIBRE AMPLIFIER TEST METHODS - PART 3-1: TEST METHODS FOR NOISE FIGURE PARAMETERS - OPTICAL SPECTRUM ANALYZER TEST METHOD |
| CEI EN 61290-3-2 : 2010 | OPTICAL AMPLIFIERS - TEST METHODS - PART 3-2: NOISE FIGURE PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD |
| I.S. EN 61290-10-1:2009 | OPTICAL AMPLIFIERS - TEST METHODS - PART 10-1: MULTICHANNEL PARAMETERS - PULSE METHOD USING AN OPTICAL SWITCH AND OPTICAL SPECTRUM ANALYZER |
| BS EN 61290-10-3:2003 | Optical amplifiers. Test methods Multichannel parameters. Probe methods |
| BS EN 61290-10-1:2009 | Optical amplifiers. Test methods Multichannel parameters. Pulse method using an optical switch and optical spectrum analyzer |
| BS EN 61290-10-5:2014 | Optical amplifiers. Test methods Multichannel parameters. Distributed Raman amplifier gain and noise figure |
| 02/203702 DC : DRAFT APR 2002 | IEC 61292-2 TR - OPTICAL AMPLIFIERS - PART 2: THEORETICAL BACKGROUND FOR NOISE FIGURE EVALUATION USING THE ELECTRICAL SPECTRUM ANALYSER |
| 13/30269514 DC : 0 | BS EN 61290-10-5 - OPTICAL AMPLIFIERS - TEST METHODS - PART 10-5: MULTICHANNEL PARAMETERS - DISTRIBUTED RAMAN AMPLIFIER GAIN AND NOISE FIGURE |
| CEI EN 61290-3-3 : 2014 | OPTICAL AMPLIFIERS - TEST METHODS - PART 3-3: NOISE FIGURE PARAMETERS - SIGNAL POWER TO TOTAL ASE POWER RATIO |
| I.S. EN 61290-3-1:2003 | OPTICAL AMPLIFIERS - TEST METHODS - PART 3-1: NOISE FIGURE PARAMETERS - OPTICAL SPECTRUM ANALYZER METHOD |
| IEC 61290-10-4:2007 | Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer |
| IEC 61290-3-2:2008 | Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method |
| IEC 61290-10-1:2009 | Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer |
| BS EN IEC 61291-1:2018 | Optical amplifiers Generic specification |
| PD IEC TR 61292-2:2003 | Optical amplifier technical reports Theoretical background for noise figure evaluation using the electrical spectrum analyzer |
| 12/30260284 DC : 0 | BS EN 61290-3-3 - OPTICAL AMPLIFIERS - TEST METHODS - PART 3-3: NOISE FIGURE PARAMETERS - SIGNAL POWER TO TOTAL ASE POWER RATIO |
| PD IEC/TR 61292-7:2011 | Optical amplifiers Four wave mixing effect in optical amplifiers |
| BS EN 61290-10-4:2007 | Optical amplifiers. Test methods Multichannel parameters. Interpolated source subtraction method using an optical spectrum analyzer |
| BS EN 61290-3-1:2003 | Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters Optical spectrum analyzer method |
| EN IEC 61291-1:2018 | Optical amplifiers - Part 1: Generic specification |
| I.S. EN 61290-10-5:2014 | OPTICAL AMPLIFIERS - TEST METHODS - PART 10-5: MULTICHANNEL PARAMETERS - DISTRIBUTED RAMAN AMPLIFIER GAIN AND NOISE FIGURE |
| I.S. EN 61290-5-3:2002 | OPTICAL FIBRE AMPLIFIERS - BASIC SPECIFICATION - PART 5-3: TEST METHODS FOR REFLECTANCE PARAMETERS - REFLECTANCE TOLERANCE USING AN ELECTRICAL SPECTRUM ANALYSER |
| IEC 61281-1:2017 | Fibre optic communication subsystems - Part 1: Generic specification |
| IEC 61290-3-1:2003 | Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method |
| IEC 61290-10-5:2014 | Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure |
| IEC 61290-3-3:2013 | Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio |
| IEC TR 61292-6:2010 | Optical amplifiers - Part 6: Distributed Raman amplification |
| CEI EN 61290-10-1 : 2010 | OPTICAL AMPLIFIERS - TEST METHODS - PART 10-1: MULTICHANNEL PARAMETERS - PULSE METHOD USING AN OPTICAL SWITCH AND OPTICAL SPECTRUM ANALYZER |
| IEC 61291-1:2018 | Optical amplifiers - Part 1: Generic specification |
| BS EN 61281-1:1999 | Fibre optic communication subsystems Generic specification |
| I.S. EN 61290-10-3:2003 | OPTICAL AMPLIFIERS - TEST METHODS - PART 10-3: MULTICHANNEL PARAMETERS - PROBE METHODS |
| IEC TR 61292-7:2011 | Optical amplifiers - Part 7: Four wave mixing effect in optical amplifiers |
| IEC TR 61292-2:2003 | Optical amplifier technical reports - Part 2: Theoretical background for noise figure evaluation using the electrical spectrum analyzer |
| I.S. EN 61290-10-4:2007 | OPTICAL AMPLIFIERS - TEST METHODS - PART 10-4: MULTICHANNEL PARAMETERS - INTERPOLATED SOURCE SUBTRACTION METHOD USING AN OPTICAL SPECTRUM ANALYZER |
| IEC 61290-10-3:2002 | Optical amplifiers - Test methods - Part 10-3: Multichannel parameters - Probe methods |
| IEC 61290-5-3:2002 | Basic specification for optical amplifier test methods - Part 5-3: Test methods for reflectance parameters - Reflectance tolerance test method using electrical spectrum analyzer |
| EN 61290-10-5:2014 | Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure |
| EN 61290-10-3:2003 | Optical amplifiers - Test methods - Part 10-3: Multichannel parameters - Probe methods |
| EN 61290-10-1:2009 | Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer |
| EN 61290-3-1:2003 | Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method |
| EN 61290-3-3:2014 | Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio |
| EN 61290-3-2:2008 | Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method |
| EN 61290-10-4:2007 | Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer |
| IEC 61290-3-2:2008 | Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method |
| IEC TR 61931:1998 | Fibre optic - Terminology |
| IEC 61290-3-1:2003 | Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method |
| IEC 61291-1:2012 | Optical amplifiers - Part 1: Generic specification |
£37.53
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English - French
PDF - English - French
PDF 3 Users - English - French
PDF 5 Users - English - French
PDF 9 Users - English - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.