IEC 61378-2:2001
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
09-11-2017
English - French, Spanish, Castilian
08-02-2001
FOREWORD
Clause
1 General
1.1 Scope
1.2 Service conditions
2 Normative references
3 Definitions
4 List of variables
5 Ratings
5.1 General
5.2 Rated voltage
5.3 Rated current
5.4 Rated frequency
5.5 Rated power
6 Tolerances
6.1 General
6.2 Short-circuit impedance tolerances
6.3 Guarantees
7 Losses
7.1 General
7.2 No-load loss
7.3 Load loss under rated power-frequency conditions
7.4 Determination of hot-spot temperature
8 Insulation levels
8.1 Line windings
8.2 Valve windings
8.3 Induced voltage level with partial discharge measurements
9 Sound level
9.1 General
9.2 Guaranteed sound-power levels
9.3 Sound-power level at site
10 Testing
10.1 General
10.2 Tests
10.3 Load-loss measurements
10.4 Factory dielectric tests
10.5 Temperature-rise test
10.6 Load-current test
10.7 Determination of transformer sound-power level
11 High-frequency modelling
12 Loading of transformer above rating
13 Bushings
13.1 AC bushings
13.2 Valve winding bushings
14 Tap-changer
14.1 General
14.2 Current wave shape
Bibliography
This part of IEC 61378 applies to oil-immersed three-phase and -single-phase convertor transformers for use in HVDC power transmission. It applies to transformers having two, three or multiple windings. This standard does not apply to convertor transformers for industrial applications (see IEC 61378-1) and to convertor transformers for traction applications (see IEC 60310).
| Committee |
TC 14
|
| DevelopmentNote |
Also numbered as BS EN 61378-2 (06/2001) Stability Date: 2017. (09/2017)
|
| DocumentType |
Standard
|
| Pages |
45
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NF EN 61378-2 : 2001 | Identical |
| NEN EN IEC 61378-2 : 2001 | Identical |
| I.S. EN 61378-2:2001 | Identical |
| PN EN 61378-2 : 2010 | Identical |
| SN EN 61378-2 : 2001 | Identical |
| DIN EN 61378-2 : 2001 | Identical |
| VDE 0532-42 : 2001 | Identical |
| BS EN 61378-2:2001 | Identical |
| EN 61378-2:2001 | Identical |
| CEI EN 61378-2 : 2002 | Identical |
| UNE-EN 61378-2:2002 | Identical |
| BS IEC 60076-15:2015 | Power transformers Gas-filled power transformers |
| CEI EN 60076-14 : 2014 | POWER TRANSFORMERS - PART 14: LIQUID-IMMERSED POWER TRANSFORMERS USING HIGH-TEMPERATURE INSULATION MATERIALS |
| BS IEC/IEEE 65700-19-03 : 2014 | BUSHINGS FOR DC APPLICATION |
| 12/30263868 DC : 0 | BS EN 60076-14 - POWER TRANSFORMERS - PART 14: LIQUID-IMMERSED POWER TRANSFORMERS USING HIGH-TEMPERATURE INSULATION MATERIALS |
| BS EN 60076-6:2008 | Power transformers Reactors |
| I.S. EN 60076-14:2013 | POWER TRANSFORMERS - PART 14: LIQUIDIMMERSED POWER TRANSFORMERS USING HIGH-TEMPERATURE INSULATION MATERIALS (IEC 60076-14:2013 (EQV)) |
| IEC TS 60076-14:2009 | Power transformers - Part 14: Design and application of liquid-immersed power transformers using high-temperature insulation materials |
| EN 61378-1:2011 | Convertor transformers - Part 1: Transformers for industrial applications |
| BS EN 60076-14:2013 | Power transformers Liquid-immersed power transformers using high-temperature insulation materials |
| BS IEC 61378-3:2015 | Converter transformers Application guide |
| UNE-EN 60076-14:2014 | Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials |
| CEI 14-42 : 2011 | CONVERTER TRANSFORMERS - PART 3: APPLICATION GUIDE |
| IEC 61378-3:2015 | Converter transformers - Part 3: Application guide |
| CEI EN 61378-1 : 2012 | CONVERTOR TRANSFORMERS - PART 1: TRANSFORMERS FOR INDUSTRIAL APPLICATIONS |
| I.S. EN 60146-1-1:2010 | SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS |
| I.S. EN 61803:1999 | DETERMINATION OF POWER LOSSES IN HIGH-VOLTAGE DIRECT CURRENT (HVDC) CONVERTER STATIONS WITH LINE COMMUTATED CONVERTERS |
| IEC/IEEE 65700-19-03:2014 | Bushings for DC application |
| BS EN 61803 : 1999 | DETERMINATION OF POWER LOSSES IN HIGH-VOLTAGE DIRECT CURRENT (HVDC) CONVERTER STATIONS WITH LINE-COMMUTATED CONVERTERS (IEC 61803:1999) |
| CEI EN 61803 : 2011 | DETERMINATION OF POWER LOSSES IN HIGH-VOLTAGE DIRECT CURRENT (HVDC) CONVERTER STATIONS |
| 05/30133866 DC : DRAFT MAY 2005 | IEC 60076-6 - POWER TRANSFORMERS - PART 6: REACTORS |
| I.S. EN 60076-6:2008 | POWER TRANSFORMERS - PART 6: REACTORS |
| DD IEC TS 60076-14 : DRAFT 2009 | POWER TRANSFORMERS - PART 14: DESIGN AND APPLICATION OF LIQUID-IMMERSED POWER TRANSFORMERS USING HIGH-TEMPERATURE INSULATION MATERIALS |
| 02/211941 DC : 0 | IEC 60076-14 ED.1 - GUIDE FOR THE DESIGN AND APPLICATION OF LIQUID-IMMERSED POWER TRANSFORMERS USING HIGH-TEMPERATURE INSULATION MATERIALS |
| 10/30232718 DC : 0 | BS EN 60076-3 - POWER TRANSFORMERS - PART 3: INSULATION LEVELS, DIELECTRIC TESTS AND EXTERNAL CLEARANCES IN AIR |
| BS EN 61378-1:2011 | Convertor transformers Transformers for industrial applications |
| EN IEC/IEEE 65700 : 2018 | BUSHINGS FOR DC APPLICATION (IEC/IEEE 65700-19-03:2014) |
| BS EN 60076-1:2011 | Power transformers General |
| 09/30206330 DC : 0 | BS EN 61803:1999+A1 - DETERMINATION OF POWER LOSSES IN HIGH-VOLTAGE DIRECT CURRENT (HVDC) CONVERTER STATIONS |
| CEI EN 60076-1 : 2015 | POWER TRANSFORMERS - PART 1: GENERAL |
| CEI EN 60146-1-1 : 2013 | SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS |
| CEI EN 60076-6 : 2015 | POWER TRANSFORMERS - PART 6: REACTORS |
| IEC 60076-15:2015 | Power transformers - Part 15: Gas-filled power transformers |
| EN 61803:1999/A2:2016 | DETERMINATION OF POWER LOSSES IN HIGH-VOLTAGE DIRECT CURRENT (HVDC) CONVERTER STATIONS WITH LINE COMMUTATED CONVERTERS (IEC 61803:1999/A2:2016) |
| IEC 61378-1:2011 | Converter transformers - Part 1: Transformers for industrial applications |
| UNE-EN 60076-1:2013 | Power transformers - Part 1: General |
| IEC 60076-6:2007 | Power transformers - Part 6: Reactors |
| IEC 60146-1-1:2009 | Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements |
| IEC 61803:1999+AMD1:2010+AMD2:2016 CSV | Determination of power losses in high-voltage direct current (HVDC)converter stations with line-commutated converters |
| IEC 60076-1:2011 | Power transformers - Part 1: General |
| IEC 60076-14:2013 | Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials |
| 06/30156472 DC : DRAFT SEP 2006 | BS EN 60146-1-1 - SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS |
| BS EN 60146-1-1:2010 | Semiconductor converters. General requirements and line commutated converters Specification of basic requirements |
| C88-16 | Power transformers and reactors |
| IEEE C57.129-2007 REDLINE | IEEE Standard for General Requirements and Test Code for Oil-Immersed HVDC Converter Transformers |
| I.S. EN 60076-1:2011 | POWER TRANSFORMERS - PART 1: GENERAL (IEC 60076-1:2011) |
| I.S. EN IEC/IEEE 65700:2018 | BUSHINGS FOR DC APPLICATION |
| I.S. EN 61378-1:2011 | CONVERTOR TRANSFORMERS - PART 1: TRANSFORMERS FOR INDUSTRIAL APPLICATIONS (IEC 61378-1:2011) |
| EN 60076-6:2008 | Power transformers - Part 6: Reactors |
| EN 60146-1-1:2010 | Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements |
| EN 60076-1:2011 | POWER TRANSFORMERS - PART 1: GENERAL (IEC 60076-1:2011) |
| EN 60076-14:2013 | Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials |
| IEC 60270:2000+AMD1:2015 CSV | High-voltage test techniques - Partial discharge measurements |
| IEC 60214:1989 | On-load tap-changers |
| IEC 60076-10:2016 | Power transformers - Part 10: Determination of sound levels |
| IEC 60076-5:2006 | Power transformers - Part 5: Ability to withstand short circuit |
| IEC 60567:2011 | Oil-filled electrical equipment - Sampling of gases and analysis of free and dissolved gases - Guidance |
| IEC 60354:1991 | Loading guide for oil-immersed power transformers |
| IEC 60076-8:1997 | Power transformers - Part 8: Application guide |
| IEC 60146-1-1:2009 | Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements |
| IEC 60076-3:2013 | Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air |
| IEC TR 60146-1-2:2011 | Semiconductor converters - General requirements and line commutated converters - Part 1-2: Application guide |
| IEC 60137:2017 | Insulated bushings for alternating voltages above 1000 V |
| IEC 60076-1:2011 | Power transformers - Part 1: General |
| IEC 60076-2:2011 | Power transformers - Part 2: Temperature rise for liquid-immersed transformers |
| IEC 61378-1:2011 | Converter transformers - Part 1: Transformers for industrial applications |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.