IEC 62271-100:2008+AMD1:2012+AMD2:2017 CSV
|
High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers
|
IEC 60255-22-1:2007
|
Measuring relays and protection equipment - Part 22-1: Electrical disturbance tests - 1 MHz burst immunity tests
|
IEC 60270:2000+AMD1:2015 CSV
|
High-voltage test techniques - Partial discharge measurements
|
IEEE C37.90-2005
|
IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus
|
IEC 62271-200:2011
|
High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
|
IEC 62271-207:2012
|
High-voltage switchgear and controlgear - Part 207: Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV
|
IEEE C37.100.1-2007
|
IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V
|
IEC 60073:2002
|
Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
|
IEEE 386-2016 REDLINE
|
IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems Rated 2.5 kV through 35 kV
|
IEC 60050-151:2001
|
International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
|
IEC 60050-441:1984
|
International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses
|
IEC TR 62271-300:2006
|
High-voltage switchgear and controlgear - Part 300: Seismic qualification of alternating current circuit-breakers
|
CSA C22.2 No. 31 : 2014
|
SWITCHGEAR ASSEMBLIES
|
IEEE 400.2-2013 REDLINE
|
IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz)
|
IEEE C37.04B : 2008
|
RATING STRUCTURE FOR AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS - AMENDMENT 2: TO CHANGE THE DESCRIPTION OF TRANSIENT RECOVERY VOLTAGE FOR HARMONIZATION WITH IEC 62271-100
|
IEC TS 62271-304:2008
|
High-voltage switchgear and controlgear - Part 304: Design classes for indoor enclosed switchgear and controlgear for rated voltages above 1 kV up to and includuing 52 kV to be used in severe climatic conditions
|
IEC 60085:2007
|
Electrical insulation - Thermal evaluation and designation
|
IEEE 4-2013
|
IEEE Standard for High-Voltage Testing Techniques
|
IEC 60721-2-2:2012
|
Classification of environmental conditions - Part 2-2: Environmental conditions appearing in nature - Precipitation and wind
|
IEEE C37.90.3-2001
|
IEEE Standard Electrostatic Discharge Tests for Protective Relays
|
ANSI C37.85 : 1989
|
ALTERNATING-CURRENT HIGH-VOLTAGE POWER VACUUM INTERRUPTERS - SAFETY REQUIREMENTS FOR X-RADIATION LIMITS
|
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code)
|
IEEE C57.12.29-2014
|
IEEE Standard for Pad-Mounted Equipment--Enclosure Integrity for Coastal Environments
|
IEC 60255-22-6:2001
|
Electrical relays - Part 22-6: Electrical disturbance tests for measuring relays and protection equipment - Immunity to conducted disturbances induced by radio frequency fields
|
IEEE C37.40-2003
|
IEEE Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
|
IEC 60255-22-3:2007
|
Measuring relays and protection equipment - Part 22-3: Electrical disturbance tests - Radiated electromagnetic field immunity
|
IEC 60068-2-17:1994
|
Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing
|
IEC TR 60943:1998+AMD1:2008 CSV
|
Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals
|
IEEE C37.90.2:2004
|
WITHSTAND CAPABILITY OF RELAY SYSTEMS TO RADIATED ELECTROMAGNETIC INTERFERENCE FROM TRANSCEIVERS
|
IEC 62208:2011
|
Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
|
IEEE C37.90.1-2012
|
IEEE Standard for Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus
|
IEC 60255-22-2:2008
|
Measuring relays and protection equipment - Part 22-2: Electrical disturbance tests - Electrostatic discharge tests
|
IEC 60255-151:2009
|
Measuring relays and protection equipment - Part 151: Functional requirements for over/under current protection
|
IEEE C37.20.7-2007 REDLINE
|
IEEE Guide for Testing Metal-Enclosed Switchgear Rated Up to 38 kV for Internal Arcing Faults
|
IEC 62271-1:2017
|
High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
|
IEEE C57.12.31-2010
|
IEEE Standard for Pole-Mounted Equipment--Enclosure Integrity
|
IEEE C37.24-2003
|
IEEE Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclosed Switchgear
|
IEC 60071-2:1996
|
Insulation co-ordination - Part 2: Application guide
|
IEC 60721-3-3:1994+AMD1:1995+AMD2:1996 CSV
|
Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations
|
IEC 60059:1999+AMD1:2009 CSV
|
IEC standard current ratings
|
IEEE C37.41-2008 REDLINE
|
IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Fuse Links and Accessories Used with These Devices
|
IEC 60507:2013
|
Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems
|
IEC 60050-448:1995
|
International Electrotechnical Vocabulary (IEV) - Part 448: Power system protection
|
IEEE C57.12.28-2014
|
IEEE Standard for Pad-Mounted Equipment--Enclosure Integrity
|
IEC 62271-2:2003
|
High-voltage switchgear and controlgear - Part 2: Seismic qualification for rated voltages of 72,5 kV and above
|
IEEE C37.06-2009
|
IEEE Standard for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis--Preferred Ratings and Related Required Capabilities for Voltages Above 1000 V
|
IEEE 693-2005
|
IEEE Recommended Practice for Seismic Design of Substations
|
IEC 60282-2:2008
|
High-voltage fuses - Part 2: Expulsion fuses
|
IEC 62271-102:2001+AMD1:2011+AMD2:2013 CSV
|
High-voltage switchgear and controlgear - Part 102: Alternatingcurrent disconnectors and earthing switches
|
IEC 60255-22-4:2008
|
Measuring relays and protection equipment - Part 22-4: Electrical disturbance tests - Electrical fast transient/burst immunity test
|