IEC 62599-2:2010
Current
The latest, up-to-date edition.
Alarm systems - Part 2: Electromagnetic compatibility - Immunity requirements for components of fire and security alarm systems
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English - French
19-05-2010
FOREWORD
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Application of tests
5 Conditions during testing
6 Functional test
7 Mains supply voltage variations
8 Mains supply voltage dips and short interruptions
9 Electrostatic discharge
10 Radiated electromagnetic fields
11 Conducted disturbances induced by electromagnetic
fields
12 Fast transient bursts
13 Slow high energy voltage surge
IEC 62599-2:2010 for immunity requirements applies to the components of the following alarm systems, intended for use in and around buildings in residential, commercial, light industrial and industrial environments:
- access control systems, for security applications;
- alarm transmission systems;
- CCTV systems, for security applications;
- fire detection and fire alarm systems;
- intruder and hold-up alarm systems;
- social alarm systems.
DevelopmentNote |
Stability Date: 2017. (09/2017)
|
DocumentType |
Standard
|
Pages |
46
|
PublisherName |
International Electrotechnical Committee
|
Status |
Current
|
BS EN 62820-1-1:2016 | Building intercom systems System requirements. General |
ISO 7240-5:2012 | Fire detection and alarm systems Part 5: Point-type heat detectors |
17/30347208 DC : 0 | BS ISO 7240-7 - FIRE DETECTION AND ALARM SYSTEMS - PART 7: POINT-TYPE SMOKE DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION |
BS ISO 7240-8:2014 | Fire detection and alarm systems Point-type fire detectors using a carbon monoxide sensor in combination with a heat sensor |
IEC 62642-2-3:2010 | Alarm systems - Intrusion and hold-up systems - Part 2-3: Intrusion detectors - Microwave detectors |
IEC 60839-11-1:2013 | Alarm and electronic security systems - Part 11-1: Electronic access control systems - System and components requirements |
EN 60839-11-2:2015/AC:2015 | ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-2: ELECTRONIC ACCESS CONTROL SYSTEMS - APPLICATION GUIDELINES (IEC 60839-11-2:2014) |
EN 60839-11-1:2013/AC:2015 | ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-1: ELECTRONIC ACCESS CONTROL SYSTEMS - SYSTEM AND COMPONENTS REQUIREMENTS (IEC 60839-11-1:2013) |
EN 62676-1-1:2014/AC:2014 | VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL (IEC 62676-1-1:2013) |
PREN 50134-2 : DRAFT 2016 | ALARM SYSTEMS - SOCIAL ALARM SYSTEMS - PART 2: TRIGGER DEVICES |
IEC 62642-8:2011 | Alarm systems - Intrusion and hold-up systems - Part 8: Security fog device/systems |
IEC 62642-2-71:2015 | Alarm systems - Intrusion and hold-up systems - Part 2-71: Intrusion detectors - Glass break detectors (acoustic) |
BS EN 62676-1-1:2014 | Video surveillance systems for use in security applications System requirements. General |
15/30309542 DC : DRAFT MAY 2015 | BS EN 62820-1-1 ED 1.0 - BUILDING INTERCOM SYSTEMS - PART 1-1: GENERAL REQUIREMENTS |
ISO 7240-18:2017 | Fire detection and alarm systems — Part 18: Input/output devices |
I.S. EN 62676-1-1:2014 | VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL |
IEC 62642-1:2010 | Alarm systems - Intrusion and hold-up systems - Part 1: System requirements |
IEC 62642-2-4:2010 | Alarm systems - Intrusion and hold-up systems - Part 2-4: Intrusion detectors - Combined passive infrared / Microwave detectors |
IEC 62642-2-5:2010 | Alarm systems - Intrusion and hold-up systems - Part 2-5: Intrusion detectors - Combined passive infrared / Ultrasonic detectors |
09/30207158 DC : 0 | BS EN 62642-1 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 1: SYSTEM REQUIREMENTS |
ISO 7240-2:2017 | Fire detection and alarm systems — Part 2: Fire detection control and indicating equipment |
I.S. EN 60839-11-1:2013 | ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-1: ELECTRONIC ACCESS CONTROL SYSTEMS - SYSTEM AND COMPONENTS REQUIREMENTS |
UNE-EN 62676-1-1:2015 | Video surveillance systems for use in security applications - Part 1-1: System requirements - General |
IEC 60839-5-2:2016 | Alarm and electronic security systems - Part 5-2: Alarm transmission systems - Requirements for supervised premises transceiver (SPT) |
IEC 62642-3:2010 | Alarm systems - Intrusion and hold-up systems - Part 3: Control and indicating equipment |
I.S. EN 62820-1-1:2016 | BUILDING INTERCOM SYSTEMS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL |
ISO/TS 7240-29:2017 | Fire detection and alarm systems — Part 29: Video fire detectors |
ISO 7240-27:2009 | Fire detection and alarm systems Part 27: Point-type fire detectors using a scattered-light, transmitted-light or ionization smoke sensor, an electrochemical-cell carbon-monoxide sensor and a heat sensor |
ISO 7240-22:2017 | Fire detection and alarm systems — Part 22: Smoke-detection equipment for ducts |
IEC 60839-5-3:2016 | Alarm and electronic security systems - Part 5-3: Alarm transmission systems - Requirements for receiving centre transceiver (RCT) |
IEC 62851-1:2014 | Alarm and electronic security systems - Social alarm systems - Part 1: System requirements |
IEC 62642-2-72:2015 | Alarm systems - Intrusion and hold-up systems - Part 2-72: Intrusion detectors - Glass break detectors (passive) |
IEC 62642-2-2:2010 | Alarm systems - Intrusion and hold-up systems - Part 2-2: Intrusion detectors - Passive infrared detectors |
IEC 62642-4:2010 | Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices |
IEC 62851-5:2014 | Alarm and electronic security systems - Social alarm systems - Part 5: Interconnections and communications |
EN 60839-11-1:2013/AC:2015 | ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-1: ELECTRONIC ACCESS CONTROL SYSTEMS - SYSTEM AND COMPONENTS REQUIREMENTS (IEC 60839-11-1:2013) |
NF EN 62676-1-1 : 2014 | VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL |
BS EN 60839-11-1:2013 | Alarm and electronic security systems Electronic access control systems. System and components requirements |
14/30272874 DC : 0 | BS ISO 7240-29 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 29: VIDEO FIRE DETECTORS |
ISO 7240-7:2011 | Fire detection and alarm systems Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization |
ISO 7240-4:2017 | Fire detection and alarm systems — Part 4: Power supply equipment |
IEC 62642-2-73:2015 | Alarm systems - Intrusion and hold-up systems - Part 2-73: Intrusion detectors - Glass break detectors (active) |
IEC 62851-3:2014 | Alarm and electronic security systems - Social alarm systems - Part 3: Local unit and controller |
IEC 62820-3-2:2018 | Building intercom systems - Part 3-2: Application guidelines - Advanced security building intercom systems (ASBIS) |
UNE-EN 60839-11-2:2015 | Alarm and electronic security systems - Part 11-2: Electronic access control systems - Application guidelines |
UNE-EN 60839-11-1:2014 | Alarm and electronic security systems - Part 11-1: Electronic access control systems - System and components requirements |
IEC 60839-11-2:2014 | Alarm and electronic security systems - Part 11-2: Electronic access control systems - Application guidelines |
CEI EN 62820-1-1 : 1ED 2017 | BUILDING INTERCOM SYSTEMS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL |
16/30331025 DC : 0 | BS EN 50134-2 - ALARM SYSTEMS - SOCIAL ALARM SYSTEMS - PART 2: TRIGGER DEVICES |
BS EN 60839-11-2:2015 | Alarm and electronic security systems Electronic access control systems. Application guidelines |
ISO 7240-8:2014 | Fire detection and alarm systems Part 8: Point-type fire detectors using a carbon monoxide sensor in combination with a heat sensor |
CEI EN 62676-1-1 : 2014 | VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL |
I.S. EN 60839-11-2:2015 | ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-2: ELECTRONIC ACCESS CONTROL SYSTEMS - APPLICATION GUIDELINES |
IEC 62851-2:2014 | Alarm and electronic security systems - Social alarm systems - Part 2: Trigger devices |
IEC 62642-2-6:2010 | Alarm systems - Intrusion and hold-up systems - Part 2-6: Intrusion detectors - Opening contacts (magnetic) |
IEC 62642-6:2011 | Alarm systems - Intrusion and hold-up systems - Part 6: Power supplies |
IEC 62676-1-1:2013 | Video surveillance systems for use in security applications - Part 1-1: System requirements - General |
IEC 62820-1-1:2016 | Building intercom systems - Part 1-1: System requirements - General |
IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST |
IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
AS/NZS IEC 60839.11.1:2019 | Alarm and electronic security systems Electronic access control systems - System and components requirements |
IEC 61000-4-6 : 4.0 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS |
IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
AS/NZS 62676.1.1:2020 | Video surveillance systems for use in security applications System requirements - General (IEC 62676-1-1:2013, MOD) |
IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
AS/NZS IEC 60839.11.2:2019 | Alarm and electronic security systems Electronic access control systems - Application guidelines |
IEC 61000-2-2:2002+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems |
EN 300 339 : 1.1.1 |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.