• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

IEC TR 62380:2004

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Reliability data handbook - Universal model for reliability prediction of electronics components, PCBs and equipment
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

17-02-2017

Language(s)

English

Published date

17-08-2004

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Conditions of use
   4.1 Introductory remarks
   4.2 Assumptions adopted for TR 62380
   4.3 Influencing factors
   4.4 How to use the data
   4.5 Uses and aims of a reliability prediction
5 Environment influence
   5.1 General remarks
   5.2 Environment types defined
   5.3 Electrical environment conditions
   5.4 Validity model according to environment
   5.5 Components choice
   5.6 Learning during the deployment phase of new equipment
   5.7 Mission profile
   5.8 Mission profile examples
6 Equipped printed circuit boards and hybrid circuits
   (IEC 60326)
   6.1 Failure rate calculation of an equipped printed
        circuit board
   6.2 Hybrid circuits
7 Integrated circuits
   7.1 Validity domain
   7.2 Junction temperature evaluation of an integrated
        circuit
   7.3 The reliability model
8 Diodes and thyristors, transistors, optocouplers
   (IEC 60747-xx)
   8.1 Evaluating the junction temperature of diodes and
        transistors
   8.2 Low power diodes
   8.3 Power diodes
   8.4 Low power transistors
   8.5 Power transistors
   8.6 Optocouplers
9 Optoelectronics
   9.1 Light emitting diodes diode modules (IEC 60747-12-2,
        IEC 62007)
   9.2 Laser diodes modules - Failure rate
   9.3 Photodiodes and receiver modules for telecommunications
        (IEC 60747-12)
   9.4 Passive optic components
   9.5 Miscellaneous optic components
10 Capacitors and thermistors (ntc)
   10.1 Fixed plastic, paper, dielectric capacitors -
        Radio interference suppression capacitors
        (plastic, paper)
   10.2 Fixed ceramic dielectric capacitors - Defined
        temperature coefficient - Class I (IEC 60384)
   10.3 Fixed ceramic dielectric capacitors - Non defined
        temperature coefficient - Class II - Radio
        interference suppression capacitors (Ceramic,
        class II)
   10.4 Tantalum capacitors, solid electrolyte (IEC 60384)
   10.5 Aluminum, non-solid electrolyte - Life expectancy
   10.6 Aluminum electrolytic capacitor, solid electrolyte
   10.7 Aluminum electrolytic capacitor, polymer electrolyte
        (IEC 60384)
   10.8 Variable ceramic capacitors, disks (Dielectric
        ceramic) (IEC 60384)
   10.9 Thermistors with negative temperature coefficient
        (NTC) (IEC 60539)
11 Resistors and potentiometers (IEC 60115)
   11.1 Fixed low dissipation film resistors - High
        stability (rs), general purpose (rc), 'minimelf'
   11.2 Hot molded carbon composition, fixed resistors
        (IEC 60115)
   11.3 Fixed, high dissipation film resistors (IEC 60115)
   11.4 Low dissipation wirewound resistors (IEC 60115)
   11.5 High dissipation wirewound resistors (IEC 60115)
   11.6 Fixed, low dissipation surface mounting resistors
        and resistive array (IEC 60115)
   11.7 Non wirewound cermet potentiometer (one or several
        turn) (IEC 60393)
12 Inductors and transformers (IEC 61248)
13 Microwave passive components, piezoelectric components and
   surface acoustic wave filters (IEC 61261, IEC 61019,
   IEC 61368)
   13.1 Microwave passive components
   13.2 Piezoelectric components
   13.3 Surface acoustic wave filters
14 Relays
   14.1 Evaluating voltage and current (vt, it) in transient
        conditions
   14.2 Mercury wetted reed relays, low power (IEC 60255)
   14.3 Dry reed relays (IEC 60255)
   14.4 Electromechanical relays, miniature or card -
        European type, thermal relays (power up to 500 W)
        (IEC 60255)
   14.5 Industrial relays, high voltage vacuum relays,
        power mercury wetted relays (IEC 60255)
15 Switches and keyboards (IEC 60948)
16 Connectors
   16.1 Circular, rectangular
   16.2 Coaxial connectors
   16.3 Connectors for PCBs and related sockets
17 Displays, solid state lamps
   17.1 Displays (IEC 61747)
   17.2 Solid state lamps (IEC 61747)
18 Protection devices (IEC 60099, IEC 60269, IEC 60738,
   IEC 61051)
   18.1 Thermistors (PTC)
   18.2 Varistors
   18.3 Fuses
   18.4 Arrestors
19 Energy devices, thermal management devices, disk drive
   19.1 Primary batteries
   19.2 Secondary batteries
   19.3 Fans
   19.4 Thermoelectric coolers
   19.5 Disk drive
   19.6 Converters (IEC 60146)

Provides elements to calculate the failure rate of mounted electronic components. It makes equipment reliability optimization studies easier to carry out, thanks to the introduction of influence factors.

DevelopmentNote
Stability Date: 2013. (10/2012) Incorporated into IEC 61709. (02/2017)
DocumentType
Technical Report
Pages
90
PublisherName
International Electrotechnical Committee
Status
Superseded

Standards Relationship
PD IEC TR 62380:2004 Identical
NEN NPR IEC/TR 62380 : 2004 Identical

UNE-EN 60947-5-3:2014 Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
BS EN 50156-2:2015 Electrical equipment for furnaces and ancillary equipment Requirements for design, development and type approval of safety devices and subsystems
BS EN 50132-5-1:2011 Alarm systems. CCTV surveillance systems for use in security applications Video transmission. General video transmission performance requirements
BS EN 60947-5-3:2013 Low-voltage switchgear and controlgear Control circuit devices and switching elements. Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
CEI EN 61131-6 : 2013 PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY
SAE J 3083 : 2017 RELIABILITY PREDICTION FOR AUTOMOTIVE ELECTRONICS BASED ON FIELD RETURN DATA
CLC/TS 62603-1:2014 Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications
13/30286163 DC : 0 BS EN 62435-2 - ELECTRONIC COMPONENTS - LONG-TERM STORAGE OF ELECTRONIC SEMICONDUCTOR DEVICES - PART 2 - DETERIORATION MECHANISMS
CEI EN 60947-5-3 : 2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB)
BS EN 16590-2:2014 Tractors and machinery for agriculture and forestry. Safety-related parts of control systems Concept phase
13/30286159 DC : 0 BS EN 62435-1 - ELECTRONIC COMPONENTS - LONG-TERM STORAGE OF ELECTRONIC SEMICONDUCTOR DEVICES - PART 1: GENERAL
13/30286167 DC : 0 BS EN 62435-5 - ELECTRONIC COMPONENTS - LONG-TERM STORAGE OF ELECTRONIC SEMICONDUCTOR DEVICES - PART 5 - DIE & WAFER DEVICES
ISO 26262-10:2012 Road vehicles Functional safety Part 10: Guideline on ISO 26262
IEC PAS 62435:2005 Electronic components - Long-duration storage of electronic components - Guidance for implementation
I.S. CLC TS 50466:2006 LONG DURATION STORAGE OF ELECTRONIC COMPONENTS - SPECIFICATION FOR IMPLEMENTATION
CEI EN 62308 : 2010 EQUIPMENT RELIABILITY - RELIABILITY ASSESSMENT METHODS
EN 50126-1:2017 Railway Applications - The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 1: Generic RAMS Process
I.S. EN 16590-2:2014 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE (ISO 25119-2:2010 MODIFIED)
I.S. EN 60300-3-15:2009 DEPENDABILITY MANAGEMENT - PART 3-15: APPLICATION GUIDE - ENGINEERING OF SYSTEM DEPENDABILITY
BS EN 50155:2017 Railway applications. Rolling stock. Electronic equipment
16/30282633 DC : 0 BS EN 50155 - RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK
EN 50132-5-1 : 2011 COR 2012 ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 5-1: VIDEO TRANSMISSION - GENERAL VIDEO TRANSMISSION PERFORMANCE REQUIREMENTS
EN 62435-5:2017 Electronic components - Long-term storage of electronic semiconductor devices - Part 5: Die and wafer devices
EN 62506 : 2013 METHODS FOR PRODUCT ACCELERATED TESTING (IEC 62506:2013)
EN 61131-6:2012 Programmable controllers - Part 6: Functional safety
EN 60300-3-15 : 2009 DEPENDABILITY MANAGEMENT - PART 3-15: APPLICATION GUIDE - ENGINEERING OF SYSTEM DEPENDABILITY
CLC/TS 50466:2006 Long duration storage of electronic components - Specification for implementation
EN 62435-1:2017 Electronic components - Long-term storage of electronic semiconductor devices - Part 1: General
EN 61557-15:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
CLC/TR 50506-1:2007 Railway applications - Communication, signalling and processing systems - Application Guide for EN 50129 - Part 1: Cross-acceptance
CLC/TR 50506-2 : 2009 RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - APPLICATION GUIDE FOR EN 50129 - PART 2: SAFETY ASSURANCE
I.S. EN 62435-2:2017 ELECTRONIC COMPONENTS - LONG-TERM STORAGE OF ELECTRONIC SEMICONDUCTOR DEVICES - PART 2: DETERIORATION MECHANISMS
BS EN 62506:2013 Methods for product accelerated testing
DIN EN 16590-2:2014-11 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2010 modified)
UNE-EN 60300-3-15:2013 Dependability management -- Part 3-15: Application guide - Engineering of system dependability
10/30189547 DC : 0 BS EN 62603 ED 1 - INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR EVALUATING THE PERFORMANCES OF PROCESS CONTROL SYSTEMS
BS EN 61131-6:2012 Programmable controllers Functional safety
PD CLC/TS 62603-1:2014 Industrial process control systems. Guideline for evaluating process control systems Specifications
PD CLC/TR 50506-2:2009 Railway applications. Communication, signalling and processing systems. Application guide for EN 50129 Safety assurance
I.S. EN 62435-5:2017 ELECTRONIC COMPONENTS - LONG-TERM STORAGE OF ELECTRONIC SEMICONDUCTOR DEVICES - PART 5: DIE AND WAFER DEVICES
CEI EN 50132-5-1 : 2013 ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 5-1: VIDEO TRANSMISSION - GENERAL VIDEO TRANSMISSION PERFORMANCE REQUIREMENTS
I.S. EN 50155:2017-11 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRONIC EQUIPMENT
EN 60947-1:2007/A2:2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014)
I.S. EN ISO 13849-1:2015 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015)
CEI CLC/TS 50466 : 2006 LONG DURATION STORAGE OF ELECTRONIC COMPONENTS - SPECIFICATION FOR IMPLEMENTATION
12/30268377 DC : 0 BS EN 50156-2 - ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 2: REQUIREMENTS FOR DESIGN, DEVELOPMENT AND TYPE APPROVAL OF SAFETY DEVICES AND SUBSYSTEMS
PD ISO/PAS 19451-1:2016 Application of ISO 26262:2011-2012 to semiconductors Application of concepts
BS EN 60947-1 : 2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
12/30187831 DC : 0 BS EN 50126-1 - RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS
PREN 50156-2 : DRAFT 2012 ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 2: REQUIREMENTS FOR DESIGN, DEVELOPMENT AND TYPE APPROVAL OF SAFETY DEVICES AND SUBSYSTEMS
BS EN 62676-1-2:2014 Video surveillance systems for use in security applications System requirements. Performance requirements for video transmission
10/30236265 DC : 0 BS EN 50132-5-1 - ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 5-1: VIDEO TRANSMISSION - GENERAL VIDEO TRANSMISSION PERFORMANCE REQUIREMENTS
16/30320037 DC : 0 BS ISO 26262-5 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 5: PRODUCT DEVELOPMENT AT THE HARDWARE LEVEL
BS EN 60300-3-15:2009 Dependability management Application guide. Engineering of system dependability
BS ISO 25119-2:2010 Tractors and machinery for agriculture and forestry. Safety-related parts of control systems Concept phase
09/30193520 DC : 0 BS EN 60947-5-3 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDF)
IEC 61709:2017 RLV Electric components - Reliability - Reference conditions for failure rates and stress models for conversion
BS ISO 26262-10:2012 Road vehicles. Functional safety Guideline on ISO 26262
I.S. EN 60947-5-3:2013 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB)
I.S. EN 50132-5-1:2011 ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 5-1: VIDEO TRANSMISSION - GENERAL VIDEO TRANSMISSION PERFORMANCE REQUIREMENTS
ISO/PAS 19451-1:2016 Application of ISO 26262:2011-2012 to semiconductors Part 1: Application of concepts
ISO 26262-5:2011 Road vehicles Functional safety Part 5: Product development at the hardware level
ISO/TS 15998-2:2012 Earth-moving machinery Machine control systems (MCS) using electronic components Part 2: Use and application of ISO 15998
EN 61709:2017 Electric components - Reliability - Reference conditions for failure rates and stress models for conversion
IEC 61709 : 3.0 ELECTRIC COMPONENTS - RELIABILITY - REFERENCE CONDITIONS FOR FAILURE RATES AND STRESS MODELS FOR CONVERSION
IEC 60300-3-15:2009 Dependability management - Part 3-15: Application guide - Engineering of system dependability
IEC 60947-5-3:2013 Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
IEC 62506:2013 Methods for product accelerated testing
EN 50155:2017 Railway applications - Rolling stock - Electronic equipment
UNI EN 16590-2 : 2014 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE
ISO 25119-2:2010 Tractors and machinery for agriculture and forestry Safety-related parts of control systems Part 2: Concept phase
I.S. EN 50126-1:2017 RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS
BS EN 61709:2017 Electric components. Reliability. Reference conditions for failure rates and stress models for conversion
BS EN 62435-2:2017 Electronic components. Long-term storage of electronic semiconductor devices Deterioration mechanisms
DIN EN 16590-2 E : 2014 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE (ISO 25119-2:2010 MODIFIED)
I.S. EN 62435-1:2017 ELECTRONIC COMPONENTS - LONG-TERM STORAGE OF ELECTRONIC SEMICONDUCTOR DEVICES - PART 1: GENERAL
PREN 50126-1 : DRAFT 2015 RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS
PD CLC/TR 50506-1:2007 Railway applications. Communication, signalling and processing systems. Application guide for EN 50129 Cross-acceptance
CEI EN 62506 : 2014 METHODS FOR PRODUCT ACCELERATED TESTING
BS EN 62435-1:2017 Electronic components. Long-term storage of electronic semiconductor devices General
CEI EN 60300-3-15 : 2011 DEPENDABILITY MANAGEMENT - PART 3-15: APPLICATION GUIDE - ENGINEERING OF SYSTEM DEPENDABILITY
16/30335990 DC : 0 BS ISO 26262-11 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 11: GUIDELINE ON APPLICATION OF ISO 26262 TO SEMICONDUCTORS
I.S. EN 62506:2013 METHODS FOR PRODUCT ACCELERATED TESTING (IEC 62506:2013 (EQV))
BS PD IEC/TS 62603-1 : 2014 INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS
08/30156645 DC : DRAFT JULY 2008 BS ISO 25119-2 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE
I.S. EN 61709:2017 ELECTRIC COMPONENTS - RELIABILITY - REFERENCE CONDITIONS FOR FAILURE RATES AND STRESS MODELS FOR CONVERSION
S.R. CLC/TR 50506-2:2009 RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - APPLICATION GUIDE FOR EN 50129 - PART 2: SAFETY ASSURANCE
IEC TS 62603-1:2014 Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications
IEC 61131-6:2012 Programmable controllers - Part 6: Functional safety
IEC 62435-5:2017 Electronic components - Long-term storage of electronic semiconductor devices - Part 5: Die and wafer devices
IEC 61557-15:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
IEC 62676-1-2:2013 Video surveillance systems for use in security applications - Part 1-2: System requirements - Performance requirements for video transmission
IEC 62435-2:2017 Electronic components - Long-term storage of electronic semiconductor devices - Part 2: Deterioration mechanisms
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV Low-voltage switchgear and controlgear - Part 1: General rules
BS EN 62435-5:2017 Electronic components. Long-term storage of electronic semiconductor devices Die and wafer devices
BS EN ISO 13849-1:2015 Safety of machinery. Safety-related parts of control systems General principles for design
UNE-EN ISO 13849-1:2016 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
EN 16590-2:2014 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2010 modified)
I.S. EN 62676-1-2:2014 VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-2: SYSTEM REQUIREMENTS - PERFORMANCE REQUIREMENTS FOR VIDEO TRANSMISSION
DD IEC/PAS 62435:2005 Electronic components. Long duration storage of electronic components. Guidance for implementation
13/30280048 DC : 0 BS EN 16590-2 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE
DD CLC/TS 50466:2006 Long duration storage of electronic components. Specification for implementation
S.R. CLC/TS 62603-1:2014 INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINE FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS
BS ISO 26262-5:2011 Road vehicles. Functional safety Product development at the hardware level
PD ISO/TS 15998-2:2012 Earth-moving machinery. Machine control systems (MCS) using electronic components Use and application of ISO 15998
17/30325424 DC : 0 BS ISO 25119-2 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE
I.S. EN 50156-2:2015 ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 2: REQUIREMENTS FOR DESIGN, DEVELOPMENT AND TYPE APPROVAL OF SAFETY DEVICES AND SUBSYSTEMS
15/30330403 DC : 0 BS EN 50126-1 - RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS
S.R. CLC/TR 50506-1:2007 RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - APPLICATION GUIDE FOR EN 50129 - PART 1: CROSS-ACCEPTANCE
I.S. EN 61131-6:2012 PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY (IEC 61131-6:2012 (EQV))
TR 102 489 : 1.4.1 ENVIRONMENTAL ENGINEERING (EE); EUROPEAN TELECOMMUNICATIONS STANDARD FOR EQUIPMENT PRACTICE; THERMAL MANAGEMENT GUIDANCE FOR EQUIPMENT AND ITS DEPLOYMENT
I.S. EN 60947-1:2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
I.S. EN 61557-15:2014 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 15: FUNCTIONAL SAFETY REQUIREMENTS FOR INSULATION MONITORING DEVICES IN IT SYSTEMS AND EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS
DIN EN ISO 13849-1:2016-06 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
IEC 62308:2006 Equipment reliability - Reliability assessment methods
BS EN 61557-15:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
EN 60947-5-3:2013 Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
EN 62676-1-2:2014/AC:2015 VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-2: SYSTEM REQUIREMENTS - PERFORMANCE REQUIREMENTS FOR VIDEO TRANSMISSION (IEC 62676-1-2:2013)
EN 50156-2:2015 Electrical equipment for furnaces and ancillary equipment - Part 2: Requirements for design, development and type approval of safety devices and subsystems
IEC 61709:2017 Electric components - Reliability - Reference conditions for failure rates and stress models for conversion
EN 62435-2:2017 Electronic components - Long-term storage of electronic semiconductor devices - Part 2: Deterioration mechanisms

IEC 60879:1986 Performance and construction of electric circulating fans and regulators
IEC 60535:1977 Jet fans and regulators
IEC 60948:1988 Numeric keyboard for home electronic systems (HES)
UTEC 96 024 : 1990 MICROCIRCUITS - THERMAL MODELISATION OF MONOLITHIC INTEGRATED CIRCUITS
IEC 61951-2:2017 Secondary cells and batteries containing alkaline or other non acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 2: Nickel-metal hydride
IEC 61951-1:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 1: Nickel-Cadmium
IEC 60747-12-2:1995 Semiconductor devices - Part 12: Optoelectronic devices - Section 2: Blank detail specification for laser diode modules with pigtail for fibre optic systems and sub-systems
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
AS/NZS 62676.1.2:2020 Video surveillance systems for use in security applications System requirements - Performance requirements for video transmission (IEC 62676-1-2:2013, MOD)

View more information
£323.65
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.