IEEE 1528-2013 REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques
Available format(s)
PDF
Superseded date
18-09-2015
Language(s)
English
Published date
06-09-2013
1. Overview
2. Normative references
3. Definitions and special terms
4. Electric field probe and readout electronics
5. Phantom models
6. SAR measurement protocols
7. Documenting SAR evaluations
8. SAR measurement system verification
Annex A (normative) - Calibration and characterization of
dosimetric probes
Annex B (informative) - Dielectric property measurements
Annex C (informative) - Example recipes for phantom head
tissue-equivalent liquids
Annex D (informative) - Phantom details
Annex E (normative) - SAR measurement uncertainty evaluation
Annex F (informative) - SAR measurement uncertainty
background information
Annex G (informative) - SAR system validation sources
Annex H (informative) - Measurement uncertainty of specific
fast SAR systems and fast SAR examples
Annex I (informative) - SAR test reduction supporting
information
Annex J (informative) - General test procedure for head SAR
Annex K (informative) - Bibliography
Specifies protocols for the measurement of the peak spatial-average SAR in a simplified model of the head of users of handheld radio transceivers used for personal wireless communications services and intended to be operated while held next to the ear.
| Committee |
International Committee on Electromagnetic Sa
|
| DevelopmentNote |
Supersedes IEEE 1528A. (09/2013)
|
| DocumentType |
Standard
|
| Pages |
500
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| CEI EN 62209-2 : 2013 | HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODY-MOUNTED WIRELESS COMMUNICATION DEVICES - HUMAN MODELS, INSTRUMENTATION, AND PROCEDURES - PART 2: PROCEDURE TO DETERMINE THE SPECIFIC ABSORPTION RATE (SAR) FOR WIRELESS COMMUNICATION DEVICES USED IN CLOSE PROXIMITY TO THE HUMAN BODY (FREQUENCY RANGE OF 30 MHZ TO 6 GHZ) |
| EN 50527-2-1:2016 | Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical devices - Part 2-1: Specific assessment for workers with cardiac pacemakers |
| IEEE DRAFT 1309 : D2.0 2005 | CALIBRATION OF ELECTROMAGNETIC FIELD SENSORS AND PROBES, EXCLUDING ANTENNAS, FROM 9 KHZ TO 40 GHZ |
| 11/30252162 DC : 0 | BS EN 62209-1 - HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODY-MOUNTED WIRELESS COMMUNICATION DEVICES HUMAN MODELS, INSTRUMENTATION, AND PROCEDURES - PART 1: PROCEDURE TO DETERMINE THE SPECIFIC ABSORPTION RATE (SAR)FOR DEVICES USED NEXT TO THE EAR (FREQUENCY RANGE OF 300 MHZ TO 6 GHZ) |
| PD IEC/PAS 63083:2017 | Specific absorption rate (SAR) measurement procedure for long term evolution (LTE) devices |
| BS EN 50527-2-1:2016 | Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical devices Specific assessment for workers with cardiac pacemakers |
| 13/30276624 DC : 0 | BS EN 62704-1 ED 1.0 - RECOMMENDED PRACTICE FOR DETERMINING THE PEAK SPATIAL-AVERAGE SPECIFIC ABSORPTION RATE (SAR) IN THE HUMAN BODY FROM WIRELESS COMMUNICATIONS DEVICES; 30 MHZ -6 GHZ - PART 1: GENERAL REQUIREMENTS FOR USING THE FINITE DIFFERENCE TIME DOMAIN (FDTD) METHOD SAR CALCULATIONS |
| PREN 50527-2-2 : DRAFT 2017 | PROCEDURE FOR THE ASSESSMENT OF THE EXPOSURE TO ELECTROMAGNETIC FIELDS OF WORKERS BEARING ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-2: SPECIFIC ASSESSMENT FOR WORKERS WITH CARDIOVERTER DEFIBRILLATORS (ICDS) |
| IEEE 1859-2017 | IEEE Standard for Relaxor-Based Single Crystals for Transducer and Actuator Applications |
| BS EN 62209-2:2010 | Human exposure to radio frequency fields from hand-held and bodymounted wireless communication devices. Human models, instrumentation, and procedures Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) |
| EN 50527-2-2:2018 | Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical devices - Part 2-2: Specific assessment for workers with cardioverter defibrillators (ICDs) |
| I.S. EN 62209-2:2010 | HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODYMOUNTED WIRELESS COMMUNICATION DEVICES - HUMAN MODELS, INSTRUMENTATION, AND PROCEDURES - PART 2: PROCEDURE TO DETERMINE THE SPECIFIC ABSORPTION RATE (SAR) FOR WIRELESS COMMUNICATION DEVICES USED IN CLOSE PROXIMITY TO THE HUMAN BODY (FREQUENCY RANGE OF 30 MHZ TO 6 GHZ) |
| IEEE 1309-2013 REDLINE | IEEE Standard for Calibration of Electromagnetic Field Sensors and Probes (Excluding Antennas) from 9 kHz to 40 GHz |
| 13/30276628 DC : 0 | BS EN 62704-3 ED 1.0 - DETERMINING THE PEAK SPATIAL-AVERAGE SPECIFIC ABSORPTION RATE (SAR) IN THE HUMAN BODY FROM WIRELESS COMMUNICATIONS DEVICES; 30 MHZ - 6 GHZ - PART 3: SPECIFIC REQUIREMENTS FOR USING THE FINITE-DIFFERENCE TIME-DOMAIN (FDTD) METHOD FOR SAR CALCULATIONS OF MOBILE PHONES |
| EN 62209-1:2016 | Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz) |
| PREN 50527-2-1 : DRAFT 2015 | PROCEDURE FOR THE ASSESSMENT OF THE EXPOSURE TO ELECTROMAGNETIC FIELDS OF WORKERS BEARING ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-1: SPECIFIC ASSESSMENT FOR WORKERS WITH CARDIAC PACEMAKERS |
| IEC 62209-1:2016 | Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz) |
| IEC PAS 63083:2017 | Specific absorption rate (SAR) measurement procedure for long term evolution (LTE) devices |
| BS EN 62209-1:2016 | Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices Devices used next to the ear (Frequency range of 300 MHz to 6 GHz) |
| 17/30359914 DC : 0 | BS EN 50527-2-2 - PROCEDURE FOR THE ASSESSMENT OF THE EXPOSURE TO ELECTROMAGNETIC FIELDS OF WORKERS BEARING ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-2: SPECIFIC ASSESSMENT FOR WORKERS WITH CARDIOVERTER DEFIBRILLATORS (ICDS) |
| 15/30321270 DC : 0 | BS EN 50527-2-1 - PROCEDURE FOR THE ASSESSMENT OF THE EXPOSURE TO ELECTROMAGNETIC FIELDS OF WORKERS BEARING ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-1: SPECIFIC ASSESSMENT FOR WORKERS WITH CARDIAC PACEMAKERS |
| IEC/IEEE 62704-1:2017 | Determining the peak spatial-average specific absorption rate (SAR) in the human body from wireless communications devices, 30 MHz to 6 GHz - Part 1: General requirements for using the finite difference time-domain (FDTD) method for SAR calculations |
| IEEE C95.1-2345-2014 | IEEE Standard for Military Workplaces--Force Health Protection Regarding Personnel Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 Hz to 300 GHz |
| TS 137 544 : 14.5.0 | UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); LTE; UNIVERSAL TERRESTRIAL RADIO ACCESS (UTRA) AND EVOLVED UTRA (E-UTRA); USER EQUIPMENT (UE) OVER THE AIR (OTA) PERFORMANCE; CONFORMANCE TESTING (3GPP TS 37.544 VERSION 14.5.0 RELEASE 14) |
| IEEE/ANSI C63.26-2015 | IEEE/ANSI Standard for Compliance Testing of Transmitters Used in Licensed Radio Services |
| TR 125 914 : 13.0.0 | UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); MEASUREMENTS OF RADIO PERFORMANCES FOR UMTS TERMINALS IN SPEECH MODE (3GPP TR 25.914 VERSION 14.0.0 RELEASE 14) |
| I.S. EN 50527-2-2:2018 | PROCEDURE FOR THE ASSESSMENT OF THE EXPOSURE TO ELECTROMAGNETIC FIELDS OF WORKERS BEARING ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-2: SPECIFIC ASSESSMENT FOR WORKERS WITH CARDIOVERTER DEFIBRILLATORS (ICDS) |
| I.S. EN 50527-2-1:2016 | PROCEDURE FOR THE ASSESSMENT OF THE EXPOSURE TO ELECTROMAGNETIC FIELDS OF WORKERS BEARING ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-1: SPECIFIC ASSESSMENT FOR WORKERS WITH CARDIAC PACEMAKERS |
| IEC PAS 63151:2018 | Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Vector measurement-based systems (Frequency range of 30 MHz to 6 GHz) |
| I.S. EN 62209-1:2016 | MEASUREMENT PROCEDURE FOR THE ASSESSMENT OF SPECIFIC ABSORPTION RATE OF HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODY-MOUNTED WIRELESS COMMUNICATION DEVICES - PART 1: DEVICE USED NEXT TO THE EAR (FREQUENCY RANGE OF 300 MHZ TO 6 GHZ) |
| IEC/IEEE 62704-3:2017 | Determining the peak spatial-average specific absorption rate (SAR) in the human body from wireless communications devices, 30 MHz to 6 GHz - Part 3: Specific requirements for using the finite difference time domain (FDTD) method for SAR calculations of mobile phones |
| IEC 62209-2:2010 | Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) |
| EN 62209-2:2010 | HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODYMOUNTED WIRELESS COMMUNICATION DEVICES - HUMAN MODELS, INSTRUMENTATION, AND PROCEDURES - PART 2: PROCEDURE TO DETERMINE THE SPECIFIC ABSORPTION RATE (SAR) FOR WIRELESS COMMUNICATION DEVICES USED IN CLOSE PROXIMITY TO THE HUMAN BODY (FREQUENCY RANGE OF 30 MHZ TO 6 GHZ) |
| IEEE/IEC 62704-3-2017 | Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz Part 3: Specific Requirements for Using the Finite Difference Time Domain (FDTD) Method for SAR Calculations of Mobile Phones |
| IEEE/IEC 62704-1-2017 | IEC/IEEE International Standard for Determining the Peak Spatial Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz. Part 1: General Requirements for using the Finite Difference Time Domain (FDTD) Method for SAR Calculations |
| IEEE 1528.7-2020 | IEEE Guide for EMF Exposure Assessment of Internet of Things (IoT) Technologies and Devices |
| IEEE/IEC 62704-4-2020 | IEC/IEEE International Standard - Determining the peak spatial-average specific absorption rate (SAR) in the human body from wireless communication devices, 30 MHz to 6 GHz - Part 4: General requirements for using the finite element method for SAR calculations |
| ES 59005 : 98 CORR 98 | CONSIDERATIONS FOR EVALUATION OF HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS (EMFS) FROM MOBILE TELECOMMUNICATION EQUIPMENT (MTE) IN THE FREQUENCY RANGE 30 MHZ - 6 GHZ |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| IEC 62209-2:2010 | Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) |
| EN 50361:2001 | Basic standard for the measurement of Specific Absorption Rate related to human exposure to electromagnetic fields from mobile phones (300 MHz - 3 GHz) |
| ASME PTC19.1 : 2013 | TEST UNCERTAINTY |
| ISO/IEC Guide 43-1:1997 | Proficiency testing by interlaboratory comparisons Part 1: Development and operation of proficiency testing schemes |
| IEEE 1309-2013 REDLINE | IEEE Standard for Calibration of Electromagnetic Field Sensors and Probes (Excluding Antennas) from 9 kHz to 40 GHz |
| IEEE 1309-2005 | IEEE Standard for Calibration of Electromagnetic Field Sensors and Probes, Excluding Antennas, from 9 kHz to 40 GHz |
| ECMA 181 : 1992 | UNCERTAINTY OF MEASUREMENT AS APPLIED TO TYPE APPROVAL OF PRODUCTS |
| IEEE C95.3-2002 | IEEE Recommended Practice for Measurements and Computations of Radio Frequency Electromagnetic Fields With Respect to Human Exposure to Such Fields, 100 kHz-300 GHz |
| IEEE C95.1-1991 | IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz |
| IEC TR 62630:2010 | Guidance for evaluating exposure from multiple electromagnetic sources |
| ECA 2-03 : 1996 | EA INTERLABORATORY COMPARISON |
| IEEE C95.1-2005 | IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| IEEE C95.6-2002 | IEEE Standard for Safety Levels With Respect to Human Exposure to Electromagnetic Fields, 0-3 kHz |
| IEC 60154-2:2016 | Flanges for waveguides - Part 2: Relevant specifications for flanges for ordinary rectangular waveguides |
| ECA 2-07 : 1997 | EAL STRATEGY TO ACHIEVE COMPARABILITY OF RESULTS IN CALIBRATION AND TESTING |
| ANSI/NCSL Z540 2 : 1997(R2012) | U.S. GUIDE TO EXPRESSION OF UNCERTAINTY IN MEASUREMENT |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
£500.39
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.