• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

IEEE C37.04-1999

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers
Available format(s)

PDF

Superseded date

03-06-2019

Published date

30-12-1999

1 Scope
2 References
3 Definitions
4 Service conditions
5 Ratings
   5.1 Rated maximum voltage
   5.2 Rated power frequency
   5.3 Rated continuous current
   5.4 Rated dielectric withstand capability
   5.5 Rated standard operating duty (standard duty
        cycle)
   5.6 Rated interrupting time
   5.7 Contact parting time
   5.8 Rated short-circuit current and related
        required capabilities
        5.8.1 Rated short-circuit current - No major
               changes
        5.8.2 Related required capabilities
   5.9 Rated transient recovery voltage (TRV)
   5.10 Rated operating endurance capabilities
   5.11 Rated capacitance current switching
   5.12 Out-of-phase switching current capability
   5.13 Shunt reactor current switching capability
   5.14 Line closing switching surge factor
   5.15 Rated control voltage
   5.16 Rated operating pressure for insulation and/or
        interruption (Pre)
   5.17 Rated operating pressure for mechanical
        operation (Prm)
6 Construction
   6.1 Outdoor apparatus bushings
   6.2 Creepage distance
   6.3 Mechanical loading
   6.4 Pressurized components
   6.5 Pressurized systems
   6.6 Gas and vacuum tightness
   6.7 Functional components
   6.8 Stored energy requirements for operating
        mechanisms
   6.9 Operating mechanism requirements
   6.10 Electromagnetic compatibility (EMC)
   6.11 Requirements for simultaneity of poles
7 Nameplate markings

Covers all outdoor and in-door types of ac high-voltage circuit breakers rated above 1000V on symmetrical current basis.

Committee
Switchgear
DevelopmentNote
Amendment 1 is available separately, see IEEE C37.04A. (09/2003) Amendment 2 is available separately, see IEEE C37.04B. (04/2009) NEW CHILD ERR 1 IS NOW ADDED
DocumentType
Standard
Pages
46
ProductNote
NEW CHILD COR 1 IS NOW ADDED NEW CHILD ERR 1 IS NOW ADDED
PublisherName
Institute of Electrical & Electronics Engineers
Status
Superseded
SupersededBy
Supersedes

IEEE 141 : 1993 IEEE Recommended Practice for Electric Power Distribution for Industrial Plants
16/30337938 DC : 0 BS EN 80005-1 - UTILITY CONNECTIONS IN PORT - HIGH VOLTAGE SHORE CONNECTION (HVSC) SYSTEMS - PART 1: GENERAL REQUIREMENTS
IEEE C37.017-2010 IEEE Standard for Bushings for High-Voltage [over 1000 V (ac)] Circuit Breakers and Gas-Insulated Switchgear
BS IEC/IEEE 62271-37-013:2015 High-voltage switchgear and controlgear Alternating-current generator circuit-breakers
IEEE DRAFT C62.22 : D8 2005 GUIDE FOR THE APPLICATION OF METAL-OXIDE SURGE ARRESTERS FOR ALTERNATING-CURRENT SYSTEMS
14/30257408 DC : 0 BS IEC/IEEE 62271-37-013 ED 1.0 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 37-013: ALTERNATING-CURRENT GENERATOR CIRCUIT-BREAKERS
CSA C62155 : 2006 : R2015 HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V
IEEE DRAFT 1036 : D13A 2006 APPLICATION OF SHUNT POWER CAPACITORS
IEEE C37.20.2-2015 IEEE Standard for Metal-Clad Switchgear
EN 62271-1:2017 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
IEEE DRAFT C37.99 : D6 99 DRAFT GUIDE FOR THE PROTECTION OF SHUNT CAPACITOR BANKS
CSA C1264 : 0 CERAMIC PRESSURIZED HOLLOW INSULATORS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR
IEEE DRAFT 1147 : D8 2005 GUIDE FOR THE REHABILITATION OF HYDROELECTRIC POWER PLANTS
MIL-DTL-32485 Base Document:2013 CIRCUIT BREAKERS, VACUUM TYPE (VCB), ELECTRIC POWER, MEDIUM VOLTAGE, ALTERNATING CURRENT, DRAW-OUT REMOVABLE CONSTRUCTION, WITHOUT INTERNAL OVERCURRENT PROTECTION
TM 5-811-1 : V19950228 ARMY TECHNICAL MANUAL - ELECTRICAL POWER SUPPLY AND DISTRIBUTION
MIL-DTL-917 Revision F:2014 ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR
IEEE DRAFT C37.06 : D6 2004 AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS - PREFERRED RATINGS AND RELATED REQUIRED CAPABILITIES
08/30184557 DC : DRAFT JUNE 2008 BS EN 62271-111 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 111: PAD-MOUNTED, DRY VAULT, AND SUBMERSIBLE AUTOMATIC CIRCUIT RECLOSERS AND FAULT INTERRUPTERS FOR ALTERNATING CURRENT SYSTEMS UP TO 38 KV
IEEE C37.20.7-2007 REDLINE IEEE Guide for Testing Metal-Enclosed Switchgear Rated Up to 38 kV for Internal Arcing Faults
CSA C62155:2006 HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V
IEC/ISO/IEEE 80005-1:2012 Utility connections in port - Part 1: High Voltage Shore Connection (HVSC) Systems - General requirements
IEEE C37.010-1999 IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
I.S. EN 62271-1:2017 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR
IEEE C37.12.1-2007 IEEE Guide for High-Voltage (>1000 V)Circuit Breaker Instruction Manual Content
IEEE 45-7 : 2012 RECOMMENDED PRACTICE FOR ELECTRICAL INSTALLATIONS ON SHIPBOARD - AC SWITCHBOARDS
NEMA SG 10 : 2013 GUIDE TO OSHA AND NFPA 70E SAFETY REQUIREMENTS WHEN SERVICING AND MAINTAINING MEDIUM-VOLTAGE SWITCHGEAR, CIRCUIT BREAKERS, AND MEDIUM-VOLTAGE CONTROLLERS RATED ABOVE 1000 V
ANSI C37.55 : 1989 MEDIUM VOLTAGE METAL-CLAD ASSEMBLIES - CONFORMANCE TEST PROCEDURES
ANSI C37.54 : 1996 FOR INDOOR ALTERNATING CURRENT HIGH-VOLTAGE CIRCUIT BREAKERS APPLIED AS REMOVABLE ELEMENTS IN METAL-ENCLOSED SWITCHGEAR ASSEMBLIES - CONFORMANCE TEST PROCEDURES
NEMA SG 11 : 2013 GUIDE FOR HANDLING AND MAINTENANCE OF ALTERNATING CURRENT OUTDOOR HIGH-VOLTAGE CIRCUIT BREAKERS
NEMA SG 4:2009(R2013) ALTERNATING CURRENT HIGH-VOLTAGE CIRCUIT BREAKERS
IEEE C62.23-1995 IEEE Application Guide for Surge Protection of Electric Generating Plants
UFC 3-550-01 : CHANGE 1 UNIFIED FACILITIES CRITERIA - EXTERIOR ELECTRICAL POWER DISTRIBUTION
IEEE DRAFT C37.104 : D7.1 OCT 2000 DRAFT GUIDE FOR AUTOMATIC RECLOSING OF LINE CIRCUIT BREAKERS FOR AC TRANSMISSION AND DISTRIBUTION LINES
IEEE C37.06-2009 IEEE Standard for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis--Preferred Ratings and Related Required Capabilities for Voltages Above 1000 V
IEEE DRAFT C37.09 : D03F JAN 99 TEST PROCEDURE FOR AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS
IEEE DRAFT C37.083 : 1998 DRAFT GUIDE FOR SYNTHETIC CAPACITIVE CURRENT SWITCHING TESTS OF AC HIGH-VOLTAGE CIRCUIT BREAKERS
IEEE C37.06.1-2017 IEEE Recommended Practice for Preferred Ratings for High-Voltage(>1000 volts) AC Circuit Breakers Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times
IEEE C37.20.6-2015 IEEE Standard for 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures
IEEE C37.100.1-2007 IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V
BS EN 62271-1:2017 High-voltage switchgear and controlgear Common specifications for alternating current switchgear and controlgear
IEC TR 62271-306:2012 High-voltage switchgear and controlgear - Part 306: Guide to IEC 62271-100, IEC 62271-1 and other IEC standards related to alternating current circuit-breakers
IEEE C37.59-2007 IEEE Standard Requirements for Conversion of Power Switchgear Equipment
API 14F : 2008 : R2013 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
IEEE 3001.5-2013 IEEE Recommended Practice for the Application of Power Distribution Apparatus in Industrial and Commercial Power Systems
IEEE 1531-2003 IEEE Guide for Application and Specification of Harmonic Filters
IEEE C37.38-1989 IEEE Standard for Gas Insulated, Metal-Enclosed Disconnecting, Interrupter, and Grounding Switches
BS ISO/IEC/IEEE 80005-1:2012 Utility connections in port High Voltage Shore Connection (HVSC) Systems. General requirements
IEEE DRAFT 1313.2 : D6 DEC 98 DRAFT GUIDE FOR THE APPLICATION OF INSULATED COORDINATION
IEEE DRAFT C37.12.1 : D2.0 2006 HIGH HIGH-VOLTAGE (>1000 V) CIRCUIT BREAKER INSTRUCTION MANUAL CONTENT
IEC 62271-1:2017 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
IEEE C62.92.5-2009 IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part V-Transmission Systems and Subtransmission Systems
IEEE C37.10-2011 REDLINE IEEE Guide for Investigation, Analysis, and Reporting of Power Circuit Breaker Failures
IEEE C37.011-2011 REDLINE IEEE Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers
IEEE C37.104-2012 REDLINE IEEE Guide for Automatic Reclosing of Circuit Breakers for AC Distribution and Transmission Lines
IEEE C37.12-2008 REDLINE IEEE Guide for Specifications of High-Voltage Circuit Breakers (over 1000 Volts)
IEEE C37.123-1996 IEEE Guide to Specifications for Gas-Insulated, Electric Power Substation Equipment
IEEE C37.12-2008 SPECIFICATION GUIDE FOR AC HIGH-VOLTAGE CIRCUIT BREAKERS BASED ON A SYMMETRICAL CURRENT BASIS
API 14F:2008 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
IEEE 242 : 2001 PROTECTION AND COORDINATION OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
IEEE 1147-2005 IEEE Guide for the Rehabilitation of Hydroelectric Power Plants
IEEE 241 : 1990 ELECTRIC POWER SYSTEMS IN COMMERCIAL BUILDINGS
IEEE DRAFT C37.10 : D10 JUN 95 DIAGNOSTIC AND FAILURE INVESTIGATION OF POWER CIRCUIT BREAKERS
IEEE 1036-2010 IEEE Guide for the Application of Shunt Power Capacitors
IEEE DRAFT 1313.1 : D11 MAY 95 INSULATION COORDINATION - DEFINITIONS, PRINCIPLES AND RULES
IEEE C57.19.100-2012 REDLINE IEEE Guide for Application of Power Apparatus Bushings
IEEE C37.016-2006 IEEE Standard for AC High Voltage Circuit Switchers rated 15.5kV through 245kV
CSA C71.1 : 1999 INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES
IEEE C37.122.1-2014 REDLINE IEEE Guide for Gas-Insulated Substations Rated Above 52 kV
IEEE C37.99-2012 IEEE Guide for the Protection of Shunt Capacitor Banks
CSA C62155 : 2006 : R2011 HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V
IEEE C37.06-2009 AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS - PREFERRED RATINGS AND RELATED REQUIRED CAPABILITIES
IEEE 1313.1-1996 IEEE Standard for Insulation Coordination - Definitions, Principles and Rules
IEEE 551 : 2006 CALCULATING SHORT-CIRCUIT CURRENTS IN INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
IEEE C37.09-1999 IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
API 14F REDLINE : 2008 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
IEEE C37.20.3-2013 REDLINE IEEE Standard for Metal-Enclosed Interrupter Switchgear (1 kV-38 kV)
IEEE C37.122.2-2011 IEEE Guide for the Application of Gas-Insulated Substations 1 kV to 52 kV
IEEE C37.010-2016 IEEE Application Guide for AC High-Voltage Circuit Breakers > 1000 Vac Rated on a Symmetrical Current Basis
IEEE C62.23-2017 IEEE Application Guide for Surge Protection of Electric Generating Plants
IEEE C37.011-2005 IEEE Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers
IEEE C37.012-2014 IEEE Guide for the Application of Capacitance Current Switching for AC High-Voltage Circuit Breakers Above 1000 V
IEEE C57.13-2008 IEEE Standard Requirements for Instrument Transformers
IEEE C62.22-2009 REDLINE IEEE Guide for the Application of Metal-Oxide Surge Arresters for Alternating-Current Systems
IEEE 45.7-2012 IEEE Recommended Practice for Electrical Installations on Shipboard -- AC Switchboards
IEEE C37.09-1999/Cor 1-2007 IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Corrigendum 1
IEEE C37.123-2016 IEEE Guide for Specifications for High-Voltage Gas-Insulated Substations Rated 52 kV and Above
IEEE C57.13-2016 IEEE Standard Requirements for Instrument Transformers
IEEE C37.20.7-2017 IEEE Guide for Testing Switchgear Rated Up to 52 kV for Internal Arcing Faults
IEEE C37.20.6-2007 IEEE Standard for 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures
IEEE C37.012-2005 IEEE Application Guide for Capacitance Current Switching for AC High-Voltage Circuit Breakers

IEEE C37.013-1997 IEEE Standard for AC High-Voltage Generator Circuit Breakers Rated on a Symmetrical Current Basis
IEEE C37.20.2-2015 IEEE Standard for Metal-Clad Switchgear
IEEE C57.19.01-2000 IEEE Standard Performance Characteristics and Dimensions for Outdoor Apparatus Bushings
IEEE C57.19.00 : 2004 GENERAL REQUIREMENTS AND TEST PROCEDURE FOR POWER APPARATUS BUSHINGS
IEC 60056:1987 High-voltage alternating-current circuit-breakers
IEC 60694:1996+AMD1:2000+AMD2:2001 CSV Common specifications for high-voltage switchgear and controlgear standards
IEEE 4-2013 IEEE Standard for High-Voltage Testing Techniques
NEMA SG 4:2009(R2013) ALTERNATING CURRENT HIGH-VOLTAGE CIRCUIT BREAKERS
IEEE C37.010-1999 IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
ANSI C84.1 : 2016 ELECTRIC POWER SYSTEMS AND EQUIPMENT - VOLTAGE RATINGS (60 HERTZ)
IEEE C37.11-2014 IEEE Standard Requirements for Electrical Control for AC High-Voltage (>1000 V) Circuit Breakers
ANSI C37.54 : 1996 FOR INDOOR ALTERNATING CURRENT HIGH-VOLTAGE CIRCUIT BREAKERS APPLIED AS REMOVABLE ELEMENTS IN METAL-ENCLOSED SWITCHGEAR ASSEMBLIES - CONFORMANCE TEST PROCEDURES
IEEE C37.011-2011 REDLINE IEEE Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers
IEEE C37.06-2009 AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS - PREFERRED RATINGS AND RELATED REQUIRED CAPABILITIES
IEEE C37.09-1999 IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
IEEE C37.015-2009 IEEE Guide for the Application of Shunt Reactor Switching
IEEE C37.24-2003 IEEE Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclosed Switchgear
IEEE 693-2005 IEEE Recommended Practice for Seismic Design of Substations

View more information
£110.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.