IEEE C37.06-2009
Current
Current
The latest, up-to-date edition.
IEEE Standard for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis--Preferred Ratings and Related Required Capabilities for Voltages Above 1000 V
Available format(s)
PDF
Language(s)
English
Published date
06-11-2009
1. Overview
2. Normative references
3. General applications to circuit breakers
4. Basic definitions applied in this standard
5. Preferred ratings for Class S1 circuit breakers for
cable systems
6. Preferred rating for Class S2 circuit breakers for line
systems rated below 100 kV
7. Preferred ratings for circuit breakers rated 100 kV and
above
8. Preferred dielectrics withstand ratings for circuit
breakers
9. Circuit-breaker operation and operating endurance
capabilities
10. Control voltage ranges for circuit breakers
11. Rated reclosing times for circuit breakers
Annex A (normative) - TRV symbols used in the tables with
the two-parameter method
Annex B (normative) - Symbols used in the tables with the
four-parameter method
Annex C (informative) - Bibliography
This standard applies to all indoor and outdoor types of ac high-voltage circuit breakers rated above 1000 V and rated on a symmetrical current basis
| Committee |
Switchgear
|
| DevelopmentNote |
Supersedes IEEE DRAFT C37.06. (12/2009) Supersedes ANSI C37.06. (10/2010)
|
| DocumentType |
Standard
|
| ISBN |
978-0-7381-6078-8
|
| Pages |
56
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Current
|
| Supersedes |
| IEEE C37.017-2010 | IEEE Standard for Bushings for High-Voltage [over 1000 V (ac)] Circuit Breakers and Gas-Insulated Switchgear |
| UFC 3-501-01 : 2015 | UNIFIED FACILITIES CRITERIA - ELECTRICAL ENGINEERING |
| BS IEC/IEEE 62271-37-013:2015 | High-voltage switchgear and controlgear Alternating-current generator circuit-breakers |
| 14/30257408 DC : 0 | BS IEC/IEEE 62271-37-013 ED 1.0 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 37-013: ALTERNATING-CURRENT GENERATOR CIRCUIT-BREAKERS |
| IEEE 3004.8-2016 | IEEE Recommended Practice for Motor Protection in Industrial and Commercial Power Systems |
| IEEE C37.122.1-2014 REDLINE | IEEE Guide for Gas-Insulated Substations Rated Above 52 kV |
| IEEE C37.100.2-2018 | IEEE Standard for Common Requirements for Testing of AC Capacitive Current Switching Devices over 1000 V |
| IEEE C37.20.2-2015 | IEEE Standard for Metal-Clad Switchgear |
| IEEE C37.23-2003 | IEEE Standard for Metal-Enclosed Bus |
| IEEE C37.96-2012 | IEEE Guide for AC Motor Protection |
| MIL-DTL-32485 Base Document:2013 | CIRCUIT BREAKERS, VACUUM TYPE (VCB), ELECTRIC POWER, MEDIUM VOLTAGE, ALTERNATING CURRENT, DRAW-OUT REMOVABLE CONSTRUCTION, WITHOUT INTERNAL OVERCURRENT PROTECTION |
| TM 5-811-1 : V19950228 | ARMY TECHNICAL MANUAL - ELECTRICAL POWER SUPPLY AND DISTRIBUTION |
| IEEE C37.122.2-2011 | IEEE Guide for the Application of Gas-Insulated Substations 1 kV to 52 kV |
| IEEE C62.23-2017 | IEEE Application Guide for Surge Protection of Electric Generating Plants |
| IEEE C37.012-2014 | IEEE Guide for the Application of Capacitance Current Switching for AC High-Voltage Circuit Breakers Above 1000 V |
| IEEE 693-2018 REDLINE | IEEE Recommended Practice for Seismic Design of Substations |
| IEEE C37.010-1999 | IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
| IEC 62271-111:2012 | High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV |
| NEMA SG 11 : 2013 | GUIDE FOR HANDLING AND MAINTENANCE OF ALTERNATING CURRENT OUTDOOR HIGH-VOLTAGE CIRCUIT BREAKERS |
| IEEE 387-1995 | IEEE Standard Criteria for Diesel-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations |
| IEEE C62.23-1995 | IEEE Application Guide for Surge Protection of Electric Generating Plants |
| UFC 3-550-01 : CHANGE 1 | UNIFIED FACILITIES CRITERIA - EXTERIOR ELECTRICAL POWER DISTRIBUTION |
| IEEE DRAFT C37.104 : D7.1 OCT 2000 | DRAFT GUIDE FOR AUTOMATIC RECLOSING OF LINE CIRCUIT BREAKERS FOR AC TRANSMISSION AND DISTRIBUTION LINES |
| IEEE DRAFT C37.083 : 1998 | DRAFT GUIDE FOR SYNTHETIC CAPACITIVE CURRENT SWITCHING TESTS OF AC HIGH-VOLTAGE CIRCUIT BREAKERS |
| IEEE C37.015-2009 | IEEE Guide for the Application of Shunt Reactor Switching |
| IEEE C37.06.1-2017 | IEEE Recommended Practice for Preferred Ratings for High-Voltage(>1000 volts) AC Circuit Breakers Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times |
| IEEE C37.20.6-2015 | IEEE Standard for 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures |
| IEEE 3001.5-2013 | IEEE Recommended Practice for the Application of Power Distribution Apparatus in Industrial and Commercial Power Systems |
| IEEE C57.142 : 2010 | GUIDE TO DESCRIBE THE OCCURRENCE AND MITIGATION OF SWITCHING TRANSIENTS INDUCED BY TRANSFORMERS, SWITCHING DEVICE, AND SYSTEM INTERACTION |
| IEEE C37.10-2011 REDLINE | IEEE Guide for Investigation, Analysis, and Reporting of Power Circuit Breaker Failures |
| IEEE C37.011-2011 REDLINE | IEEE Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers |
| IEEE C37.123-1996 | IEEE Guide to Specifications for Gas-Insulated, Electric Power Substation Equipment |
| IEC TR 62271-306:2012 | High-voltage switchgear and controlgear - Part 306: Guide to IEC 62271-100, IEC 62271-1 and other IEC standards related to alternating current circuit-breakers |
| IEEE C37.82-1987 | IEEE Standard for the Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations |
| IEEE/IEC C37.60-2012 | IEEE/IEC International Standard - High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV |
| IEEE C37.11-2014 | IEEE Standard Requirements for Electrical Control for AC High-Voltage (>1000 V) Circuit Breakers |
| CSA C71.1 : 1999 | INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES |
| IEEE C37.09-1999 | IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
| IEEE C37.20.3-2013 REDLINE | IEEE Standard for Metal-Enclosed Interrupter Switchgear (1 kV-38 kV) |
| IEEE 2030.3-2016 | IEEE Standard Test Procedures for Electric Energy Storage Equipment and Systems for Electric Power Systems Applications |
| IEEE C62.22-2009 REDLINE | IEEE Guide for the Application of Metal-Oxide Surge Arresters for Alternating-Current Systems |
| IEEE C37.010-2016 | IEEE Application Guide for AC High-Voltage Circuit Breakers > 1000 Vac Rated on a Symmetrical Current Basis |
| IEEE C37.99-2000 | IEEE Guide for the Protection of Shunt Capacitor Banks |
| IEEE C37.104-2012 REDLINE | IEEE Guide for Automatic Reclosing of Circuit Breakers for AC Distribution and Transmission Lines |
| IEEE 1531-2020 REDLINE | IEEE Guide for the Application and Specification of Harmonic Filters |
| IEEE C37.123-2016 | IEEE Guide for Specifications for High-Voltage Gas-Insulated Substations Rated 52 kV and Above |
| IEEE C37.100.1-2007 | IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V |
| IEEE C37.12-2018 | IEEE Guide for Specifications of High-Voltage Circuit Breakers (over 1000 V) |
| IEEE C37.20.3-2001 | IEEE Standard for Metal-Enclosed Interrupter Switchgear |
| IEEE C37.82-2017 | IEEE Standard for the Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations |
| IEEE C37.20.9-2019 | IEEE Standard for Metal-Enclosed Switchgear Rated 1 kV to 52 kV Incorporating Gas Insulating Systems |
| IEC 62271-100:2008+AMD1:2012+AMD2:2017 CSV | High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers |
| IEEE C37.90-2005 | IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus |
| IEEE C37.011-2005 | IEEE Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers |
| NEMA MG 1 : 2016 | MOTORS AND GENERATORS |
| IEEE C37.100.1-2007 | IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V |
| IEEE C37.09a-2005 | TEST PROCEDURE FOR AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS - AMENDMENT 1: CAPACITANCE CURRENT SWITCHING |
| IEEE C37.04B : 2008 | RATING STRUCTURE FOR AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS - AMENDMENT 2: TO CHANGE THE DESCRIPTION OF TRANSIENT RECOVERY VOLTAGE FOR HARMONIZATION WITH IEC 62271-100 |
| IEEE 4-2013 | IEEE Standard for High-Voltage Testing Techniques |
| IEEE C37.010-1999 | IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
| ANSI C84.1 : 2016 | ELECTRIC POWER SYSTEMS AND EQUIPMENT - VOLTAGE RATINGS (60 HERTZ) |
| IEEE C37.011-2011 REDLINE | IEEE Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers |
| IEEE C37.015-1993 | IEEE Application Guide for Shunt Reactor Switching |
| IEEE C37.09-1999 | IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
| IEEE C37.90.1-2012 | IEEE Standard for Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus |
| IEEE C37.04A : 2003 | RATING STRUCTURE FOR AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS - AMENDMENT 1: CAPACITANCE CURRENT SWITCHING |
| IEEE C37.015-2009 | IEEE Guide for the Application of Shunt Reactor Switching |
| IEEE C37.04-1999 | IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers |
| IEEE C37.016-2006 | IEEE Standard for AC High Voltage Circuit Switchers rated 15.5kV through 245kV |
£96.47
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.