IEEE C37.90-2005
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus
01-09-2022
English
31-01-2006
1 Overview
1.1 Scope
1.2 Purpose
2 Normative references
3 Special terms
4 Service conditions
4.1 Usual service conditions
4.2 Unusual service conditions
5 Electrical ratings
5.1 Standard current and voltage ratings for relays
5.2 Maximum design voltage and current for relays
5.3 Allowable variations from rated voltage for voltage
operated auxiliary relays
5.4 Allowable variation from rated voltage and current
for protective relays
5.5 Allowable ac component in dc control voltage supply
5.6 Short time thermal withstand
5.7 Make, carry, and interrupt ratings for tripping
output circuits
5.8 Make, carry, and interrupt ratings for output
circuits not rated for tripping
5.9 Published data for auxiliary relays
6 Heating limits of temperature rise for coils
7 Mechanical requirements
7.1 Mechanical durability of relay operation
7.2 Mechanical durability of plug-in relays
7.3 Mechanical durability of relay setting controls
7.4 Shock and vibration
8 Insulation tests
8.1 General requirements
8.2 Dielectric power frequency tests
8.3 Impulse voltage tests
Annex A (informative) Applicable IEC standards
Describes standard service conditions, standard ratings, performance requirements, and testing requirements for relays and relay systems used to protect and control power apparatus.
| Committee |
Power System Relaying and Control
|
| DevelopmentNote |
Supersedes IEEE DRAFT C37.90. (02/2006)
|
| DocumentType |
Standard
|
| ISBN |
978-0-7381-4819-9
|
| Pages |
29
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Withdrawn
|
| Supersedes |
| IEEE 141 : 1993 | IEEE Recommended Practice for Electric Power Distribution for Industrial Plants |
| IEEE 487.3-2014 | IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Hybrid Facilities |
| IEEE 1590-2009 REDLINE | IEEE Recommended Practice for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Using Optical Fiber Systems |
| IEEE DRAFT C37.95 : D6 99 | DRAFT GUIDE FOR PROTECTIVE RELAYING OF UTILITY CONSUMER INTERCONNECTIONS |
| IEEE C37.90.1-2012 | IEEE Standard for Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus |
| IEEE C37.113-1999 | IEEE Guide for Protective Relay Applications to Transmission Lines |
| IEEE C37.96-2012 | IEEE Guide for AC Motor Protection |
| UFC 3-540-08 : 2017 | UNIFIED FACILITIES CRITERIA - UTILITY-SCALE RENEWABLE ENERGY SYSTEMS |
| MIL-PRF-32484 Base Document:2013 | PROTECTIVE RELAYS AND ATTACHMENTS, MEDIUM VOLTAGE VACUUM CIRCUIT BREAKER APPLICATIONS |
| TM 5-811-1 : V19950228 | ARMY TECHNICAL MANUAL - ELECTRICAL POWER SUPPLY AND DISTRIBUTION |
| IEEE C37.92-2023 | IEEE Standard for Low-Energy Analog Interfaces between Protective Relays and Power System Signal Sources |
| MIL-DTL-917 Revision F:2014 | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR |
| IEEE C37.06-2009 | IEEE Standard for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis--Preferred Ratings and Related Required Capabilities for Voltages Above 1000 V |
| 08/30184557 DC : DRAFT JUNE 2008 | BS EN 62271-111 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 111: PAD-MOUNTED, DRY VAULT, AND SUBMERSIBLE AUTOMATIC CIRCUIT RECLOSERS AND FAULT INTERRUPTERS FOR ALTERNATING CURRENT SYSTEMS UP TO 38 KV |
| IEEE 1031-2011 | IEEE Guide for the Functional Specification of Transmission Static Var Compensators |
| IEEE DRAFT C37.107 : D10 NOV 94 | DIGITAL PROTECTIVE RELAY INTERFACES |
| IEEE DRAFT C37.112 : D11 JAN 96 | DRAFT STANDARD INVERSE-TIME CHARACTERISTIC EQUATIONS FOR OVERCURRENT RELAYS |
| CSA C22.3 No. 61936-1 : 2008 | POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES |
| IEEE TSS : 2014 | SYNCHROPHASOR MEASUREMENT TEST SUITE SPECIFICATION |
| IEC 62271-111:2012 | High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV |
| IEEE C37.112-2018 | IEEE Standard for Inverse-Time Characteristics Equations for Overcurrent Relays |
| ANSI C12.13 : 1991 | ELECTRONIC TIME-OF-USE REGISTERS FOR ELECTRICITY METERS |
| IEEE C37.113-2015 | IEEE Guide for Protective Relay Applications to Transmission Lines |
| IEEE C62.23-2017 | IEEE Application Guide for Surge Protection of Electric Generating Plants |
| IEEE DRAFT C37.90.3 : D2.3 2000 | DRAFT STANDARD ELECTROSTATICS DISCHARGE TESTS FOR PROTECTIVE RELAYS |
| IEEE C62.23-1995 | IEEE Application Guide for Surge Protection of Electric Generating Plants |
| UFC 3-550-01 : CHANGE 1 | UNIFIED FACILITIES CRITERIA - EXTERIOR ELECTRICAL POWER DISTRIBUTION |
| IEEE 487.2-2013 | IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations through the Use of Optical Fiber Systems |
| IEEE C37.92-2005 | IEEE Standard for Analog Inputs to Protective Relays From Electronic Voltage and Current Transducers |
| IEEE DRAFT C37.104 : D7.1 OCT 2000 | DRAFT GUIDE FOR AUTOMATIC RECLOSING OF LINE CIRCUIT BREAKERS FOR AC TRANSMISSION AND DISTRIBUTION LINES |
| CSA C22.3 No. 61936-1 : 2008 : R2015 | POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES |
| IEEE 946-2004 | IEEE Recommended Practice for the Design of DC Auxiliary Power Systems for Generating Systems |
| IEEE 1491-2012 REDLINE | IEEE Guide for Selection and Use of Battery Monitoring Equipment in Stationary Applications |
| IEEE 1547-2003 | IEEE Standard for Interconnecting Distributed Resources with Electric Power Systems |
| API 551 : 2016 | PROCESS MEASUREMENT |
| IEC 62270:2013 | Guide for computer-based control for hydroelectric power plant automation |
| IEEE 242-2001 | IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book) |
| IEEE C62.41-1991 | IEEE Recommended Practice for Surge Voltages in Low-Voltage AC Power Circuits |
| IEEE/IEC C37.60-2012 | IEEE/IEC International Standard - High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV |
| IEEE DRAFT 367 : D5.1 SEP 95 | DRAFT RECOMMENDED PRACTICE FOR DETERMINING THE ELECTRIC POWER STATION GROUND POTENTIAL RISE AND INDUCED VOLTAGE FROM A POWER FAULT |
| IEEE C37.121-2012 | GUIDE FOR SWITCHGEAR - UNIT SUBSTATION - REQUIREMENTS |
| IEEE C37.104-2012 REDLINE | IEEE Guide for Automatic Reclosing of Circuit Breakers for AC Distribution and Transmission Lines |
| IEEE C37.013-1997 | IEEE Standard for AC High-Voltage Generator Circuit Breakers Rated on a Symmetrical Current Basis |
| IEEE C37.230-2007 | IEEE Guide for Protective Relay Applications to Distribution Lines |
| IEEE C37.114-2014 REDLINE | IEEE Guide for Determining Fault Location on AC Transmission and Distribution Lines |
| IEEE C37.233 : 2009 | GUIDE FOR POWER SYSTEM PROTECTION TESTING |
| IEEE 1613.1-2013 | IEEE Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Transmission and Distribution Facilities |
| IEEE C37.234-2009 | IEEE Guide for Protective Relay Applications to Power System Buses |
| IEEE C37.246-2017 | IEEE Guide for Protection Systems of Transmission-to-Generation Interconnections |
| IEEE 367-2012 | IEEE Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power Fault |
| IEEE DRAFT C37.96 : D5 99 | DRAFT GUIDE FOR AC MOTOR PROTECTION |
| IEEE C37.112-1996 | IEEE Standard Inverse-Time Characteristic Equations for Overcurrent Relays |
| IEEE C37.105 : 2010 | QUALIFYING CLASS 1E PROTECTIVE RELAYS AND AUXILIARIES FOR NUCLEAR POWER GENERATING STATIONS |
| IEEE C37.121-2012 REDLINE | IEEE Guide for Switchgear - Unit Substation - Requirements |
| IEEE C37.98-2013 | IEEE Standard for Seismic Qualification Testing of Protective Relays and Auxiliaries for Nuclear Facilities |
| IEEE/IEC 1249-2013 | IEC/IEEE Guide for Computer-based Control for Hydroelectric Power Plant Automation |
| IEEE 1623-2004 | IEEE Guide for the Functional Specification of Medium Voltage (1 kV - 35 kV) Electronic Shunt Devices for Dynamic Voltage Compensation |
| IEEE 2030.100-2017 | IEEE Recommended Practice for Implementing an IEC 61850-Based Substation Communications, Protection, Monitoring, and Control System |
| IEEE C37.21-2005 | IEEE Standard for Control Switchboards |
| IEEE 1143-2012 | IEEE Guide on Shielding Practice for Low Voltage Cables |
| IEEE C93.5-2021 | IEEE Standard for Requirements for Power Line Carrier Transmitter/ Receiver Equipment used to Transfer Discrete Teleprotection Signals |
| IEEE C37.98-2023 | IEEE Standard for Seismic Qualification Testing of Protective Relays and Auxiliaries for Nuclear Facilities |
| IEEE/IEC 60255-118-1-2018 | IEEE/IEC International Standard - Measuring relays and protection equipment - Part 118-1: Synchrophasor for power systems - Measurements |
| IEEE C37.114-2004 | IEEE Guide for Determining Fault Location on AC Transmission and Distribution Lines |
| IEEE 741-1997 | IEEE Standard Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating Stations |
| IEEE 308-2001 | IEEE Standard Criteria for Class 1E Power Systems for Nuclear Power Generating Stations |
| IEEE C37.100-1992 | IEEE Standard Definitions for Power Switchgear |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.