|
ISO 10961:2010
|
Gas cylinders Cylinder bundles Design, manufacture, testing and inspection |
|
ISO 17636-1:2013
|
Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film |
|
ISO 209:2007
|
Aluminium and aluminium alloys — Chemical composition |
|
ISO 9606-2:2004
|
Qualification test of welders Fusion welding Part 2: Aluminium and aluminium alloys |
|
EN 10025-4:2004
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
|
ISO 1496-1:2013
|
Series 1 freight containers Specification and testing Part 1: General cargo containers for general purposes |
|
ISO 11666:2010
|
Non-destructive testing of welds Ultrasonic testing Acceptance levels |
|
ISO 10042:2005
|
Welding Arc-welded joints in aluminium and its alloys Quality levels for imperfections |
|
ISO 23277:2015
|
Non-destructive testing of welds Penetrant testing Acceptance levels |
|
ASME PV CODE 9 : 2017
|
BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
|
ISO 15614-2:2005
|
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys |
|
ISO 9712:2012
|
Non-destructive testing Qualification and certification of NDT personnel |
|
EN 10164 : 2004
|
STEEL PRODUCTS WITH IMPROVED DEFORMATION PROPERTIES PERPENDICULAR TO THE SURFACE OF THE PRODUCT - TECHNICAL DELIVERY CONDITIONS |
|
NORSOK Z 015 : REV 4
|
TEMPORARY EQUIPMENT |
|
NORSOK R 003 REV 3 : 2017
|
SAFE USE OF LIFTING EQUIPMENT |
|
ISO 6892-1:2016
|
Metallic materials Tensile testing Part 1: Method of test at room temperature |
|
EN 1011-1:2009
|
Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding |
|
ISO 1496-5:1991
|
Series 1 freight containers Specification and testing Part 5: Platform and platform-based containers |
|
IMO IF110 : 2014 SUPP 2016
|
SOLAS CONSOLIDATED EDITION |
|
EN 10025-1 : 2004
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
|
EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
|
EN 10210-1 : 2006
|
HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
|
ISO 23278:2015
|
Non-destructive testing of welds Magnetic particle testing Acceptance levels |
|
ISO 17640:2017
|
Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment |
|
EN 1011-2:2001/A1:2003
|
WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS |
|
ISO 148-1:2016
|
Metallic materials Charpy pendulum impact test Part 1: Test method |
|
ISO 5817:2014
|
Welding Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) Quality levels for imperfections |
|
ISO 3452-1:2013
|
Non-destructive testing Penetrant testing Part 1: General principles |
|
ISO 15614-1:2017
|
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
|
IMO IA811 : 2001
|
MOBILE OFFSHORE DRILLING UNITS (MODU) CODE, CONSOLIDATED |
|
ISO 15609-1:2004
|
Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
|
EN 10219-1 : 2006
|
COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
|
ISO 1496-2:2008
|
Series 1 freight containers Specification and testing Part 2: Thermal containers |
|
ISO 17636-2:2013
|
Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors |
|
ISO 1496-3:1995
|
Series 1 freight containers Specification and testing Part 3: Tank containers for liquids, gases and pressurized dry bulk |
|
EN 10250-2:1999
|
OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - PART 2: - NON-ALLOY QUALITY AND SPECIAL STEELS |
|
ISO 10474:2013
|
Steel and steel products Inspection documents |
|
ISO 10675-2:2017
|
Non-destructive testing of welds Acceptance levels for radiographic testing Part 2: Aluminium and its alloys |
|
ISO 668:2013
|
Series 1 freight containers Classification, dimensions and ratings |
|
EN 10025-2:2004/AC:2005
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
|
ISO 17637:2016
|
Non-destructive testing of welds Visual testing of fusion-welded joints |
|
ISO 9001:2015
|
Quality management systems - Requirements |
|
ISO 1496-4:1991
|
Series 1 freight containers Specification and testing Part 4: Non-pressurized containers for dry bulk |
|
ISO 7500-1:2015
|
Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
|
AWS D1.1 : 2000
|
STRUCTURAL WELDING CODE - STEEL |
|
ISO 15607:2003
|
Specification and qualification of welding procedures for metallic materials General rules |
|
IMO I288 : 2000 SUPP 2008
|
CODE OF SAFE PRACTICE FOR THE CARRIAGE OF CARGOES AND PERSONS BY OFFSHORE SUPPLY VESSELS (OSV CODE) |
|
ISO 10675-1:2016
|
Non-destructive testing of welds Acceptance levels for radiographic testing Part 1: Steel, nickel, titanium and their alloys |
|
EN 10025-3 : 2004
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
|
ISO 17638:2016
|
Non-destructive testing of welds Magnetic particle testing |
|
EN 10250-3:1999
|
OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - PART 3: ALLOY SPECIAL STEELS |
|
ISO 1161:2016
|
Series 1 freight containers — Corner and intermediate fittings — Specifications |
|
EN 287-1:2011
|
QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |