ISO 11469:2016
Current
Current
The latest, up-to-date edition.
Plastics — Generic identification and marking of plastics products
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
23-09-2016
ISO 11469:2016 specifies a system of uniform marking of products that have been fabricated from plastics materials. Provision for the process or processes to be used for marking is outside the scope of this International Standard.
NOTE 1 Precise details of the marking, e.g. the minimum size of the item to be marked, the size of the lettering, the appropriate location of the marking, are subject to agreement between the manufacturer and the user.
The marking system is intended to help identify plastics products for subsequent decisions concerning handling, waste recovery or disposal.
Generic identification of the plastics is provided by the symbols and abbreviated terms given in ISO 1043‑1, ISO 1043‑2, ISO 1043‑3 and ISO 1043‑4.
NOTE 2 If more detailed information for material identification is needed, additional marking of plastics products can be applied as defined in the appropriate product standard.
ISO 11469:2016 is not intended to supplant, replace or in any way interfere with the requirements for labelling specified in product standards or legislation.
| DevelopmentNote |
Supersedes ISO/DIS 11469. (09/2016)
|
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN EN ISO 11469 : 2016 | Identical |
| NS EN ISO 11469 : 2000 | Identical |
| I.S. EN ISO 11469:2016 | Identical |
| PN EN ISO 11469 : 2016 | Identical |
| SN EN ISO 11469 : 2017 | Identical |
| UNI EN ISO 11469 : 2001 | Identical |
| SS-EN ISO 11469 : 2016 | Identical |
| UNI EN ISO 11469 : 2016 | Identical |
| BS EN ISO 11469:2016 | Identical |
| UNE-EN ISO 11469:2017 | Identical |
| EN ISO 11469:2016 | Identical |
| NF EN ISO 11469 : 2016 | Identical |
| DIN EN ISO 11469:2015-09 (Draft) | Identical |
| DIN ISO 11469:1995-09 | Identical |
| NF ISO 11469 : 1994 | Identical |
| BS 7746:1994 | Identical |
| SANS 11469 : 1ED 2014 | Identical |
| DIN EN ISO 11469:2000-10 | Identical |
| ASTM D 1972 : 1997 : R2005 | Standard Practice for Generic Marking of Plastic Products (Withdrawn 2014) |
| UNE-EN ISO 16396-1:2015 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system, marking of products and basis for specifications (ISO 16396-1:2015) |
| 09/30194273 DC : 0 | BS EN 62208 - EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS |
| 13/30240164 DC : 0 | BS ISO 16365-1 - PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| ECMA 341 : 4ED 2010 | ENVIRONMENTAL DESIGN CONSIDERATIONS FOR ICT & CE PRODUCTS |
| UNI CEN/TS 16398 : 2013 | PLASTICS - TEMPLATE FOR REPORTING AND COMMUNICATION OF BIOBASED CARBON CONTENT AND RECOVERY OPTIONS OF BIOPOLYMERS AND BIOPLASTICS - DATA SHEET |
| PREN 840-2 : DRAFT 2010 | MOBILE WASTE CONTAINERS - PART 2: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH FLAT LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| BS ISO 17422:2002 | Plastics. Environmental aspects. General guidelines for their inclusion in standards |
| 08/30190628 DC : 0 | BS ISO 21507 - EARTH-MOVING MACHINERY - PERFORMANCE REQUIREMENTS FOR NONMETALLIC FUEL TANKS |
| DIN EN 16848 E : 2017 | BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS TO BUSINESS COMMUNICATION OF CHARACTERISTICS USING A DATA SHEET |
| DIN EN 15345:2008-02 | Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates |
| PREN 840-3 : DRAFT 2010 | MOBILE WASTE CONTAINERS - PART 3: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH DOME LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| 12/30240423 DC : 0 | BS ISO 16396-1 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS |
| 13/30279399 DC : 0 | BS EN 60286-2 - PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 2: TAPE PACKAGING OF COMPONENTS WITH UNIDIRECTIONAL LEADS ON CONTINUOUS TAPES |
| R7004-17 | Sustainability standard for household cooking appliances (Binational standard with AHAM 7004-2017 and UL 7004) |
| CSA R7003 : 2016 | SUSTAINABILITY STANDARD FOR HOUSEHOLD CLOTHES WASHERS |
| SAE J 1344 : 1997(S2017) | MARKING OF PLASTIC PARTS |
| CSA R7001 : 2014 | SUSTAINABILITY STANDARD FOR HOUSEHOLD REFRIGERATION APPLIANCES |
| CSA SPE 7005 : 2016 | SUSTAINABILITY STANDARD FOR HOUSEHOLD CLOTHES DRYING APPLIANCES |
| CSA R7006 : 2018 | SUSTAINABILITY STANDARD FOR HOUSEHOLD ROOM AIR CONDITIONING APPLIANCES |
| SPE-7002-14 | Sustainability standard for household portable and floor care appliances (Bi-national standard, with AHAM 7002-2014 and UL 7002) |
| I.S. EN 61076-3-120:2016 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-120: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR REWIRABLE POWER CONNECTORS WITH SNAP LOCKING FOR RATED VOLTAGE OF 250 V D.C. AND RATED CURRENT OF 30 A |
| UNE-ISO 21507:2011 | Earth-moving machinery -- Performance requirements for non-metallic fuel tanks |
| I.S. EN ISO 20029-1:2018 | PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATION (ISO 20029-1:2017) |
| ISO 16365-1:2014 | Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 1: Designation system and basis for specifications |
| EN ISO 20029-1:2018 | Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specification (ISO 20029-1:2017) |
| I.S. EN 60286-4:2013 | PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 4: STICK MAGAZINES FOR ELECTRONIC COMPONENTS ENCAPSULATED IN PACKAGES OF DIFFERENT FORMS (IEC 60286-4:2013 (EQV)) |
| IEC PAS 63015:2016 | Definition of "Low-Halogen" for electronic products |
| BS EN 15347:2007 | Plastics. Recycled Plastics. Characterization of plastics waste |
| DIN EN 15342 E : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES |
| BS EN 840-4:2012 | Mobile waste and recycling containers Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices. Dimensions and design |
| UNE-EN 840-4:2013 | Mobile waste and recycling containers - Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices - Dimensions and design |
| UNE-EN 840-1:2013 | Mobile waste and recycling containers - Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices - Dimensions and design |
| EN 175301-801:2006 | Detail Specification: High density rectangular connectors, round removable crimp contacts |
| EN 62208:2011 | Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements |
| EN 60286-2:2015 | Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes |
| EN 60286-4:2013 | Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of different forms |
| EN 50290-2-20:2016 | Communication cables - Part 2-20: Common design rules and construction - General |
| CEN/TS 16398:2012 | Plastics - Template for reporting and communication of bio-based carbon content and recovery options of biopolymers and bioplastics - Data sheet |
| DIN EN 840-3:2013-03 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 3: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH DOME LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| DIN EN 15551:2011-01 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| ISO/IEC 29142-3:2013 | Information technology — Print cartridge characterization — Part 3: Environment |
| DIN EN ISO 16396-1 E : 2015 | PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS (ISO 16396-1:2015) |
| BS EN 62075:2012 | Audio/video, information and communication technology equipment. Environmentally conscious design |
| ISO 28078-1:2009 | Plastics Poly(phenylene sulfide) (PPS) moulding and extrusion materials Part 1: Designation system and basis for specifications |
| 10/30232446 DC : 0 | BS EN 840-3 - MOBILE WASTE CONTAINERS - PART 3: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH DOME LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| PD CEN/TS 16398:2012 | Plastics. Template for reporting and communication of biobased carbon content and recovery options of biopolymers and bioplastics. Data sheet |
| DIN EN 15551:2013-05 (Draft) | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| BS EN 60286-6:2004 | Packaging of components for automatic handling Bulk case packaging for surface mounting components |
| BS EN 61076-3-118:2010 | Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for a 4 pole + PE power connector with push-pull coupling |
| ASTM D 1972 : 1997 : R2001 | Standard Practice for Generic Marking of Plastic Products |
| BS EN 50290-2-20:2016 | Communication cables Common design rules and construction. General |
| BS EN 62208:2011 | Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements |
| 16/30282538 DC : 0 | BS ISO 20140-5 - AUTOMATION SYSTEMS AND INTEGRATION - EVALUATING ENERGY EFFICIENCY AND OTHER FACTORS OF MANUFACTURING SYSTEMS THAT INFLUENCE THE ENVIRONMENT - PART 5: ENVIRONMENTAL INFLUENCE EVALUATION DATA |
| BS EN 15551:2017 | Railway applications. Railway rolling stock. Buffers |
| ASTM D 1972 : 1997 | Standard Practice for Generic Marking of Plastic Products |
| UNI EN 15345 : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES |
| IEC TR 62422:2007 | Environmental characterization of solid insulating materials |
| CEI EN 62208 : 2012 | EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS |
| EN 60286-1:2017 | Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes |
| AHAM 7002 : 2014 | SUSTAINABILITY STANDARD FOR HOUSEHOLD PORTABLE AND FLOOR CARE APPLIANCES |
| ECMA 370 : 5ED 2015 | TED - THE ECO DECLARATION |
| IEC 60286-1:2017 | Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes |
| NSF 426 : 2017 | ENVIRONMENTAL LEADERSHIP AND CORPORATE SOCIAL RESPONSIBILITY ASSESSMENT OF SERVERS |
| I.S. EN 60286-1:2017 | PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 1: TAPE PACKAGING OF COMPONENTS WITH AXIAL LEADS ON CONTINUOUS TAPES |
| IEC PAS 61076-3-126:2018 | Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5 pole power connector for industrial environments with push-pull locking |
| DIN EN 15347:2008-02 | Plastics - Recycled Plastics - Characterisation of plastics wastes |
| DIN EN 15347 E : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES |
| IEC 60286-4:2013 | Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of different forms |
| BS EN 840-1:2012 | Mobile waste and recycling containers Containers with 2 wheels with a capacity up to 400 l for comb lifting devices. Dimensions and design |
| BS EN 60286-2:2015 | Packaging of components for automatic handling Packaging of components with unidirectional leads on continuous tapes |
| I.S. EN 61076-3-118:2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING |
| DIN EN ISO 16396-1:2015-05 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system, marking of products and basis for specifications (ISO 16396-1:2015) |
| 08/30165041 DC : DRAFT FEB 2008 | BS ISO 28078-1 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| CEI EN 61076-3-118 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING |
| BS ISO 21507:2010 | Earth-moving machinery. Performance requirements for non-metallic fuel tanks |
| IEC GUIDE 114:2005 | Environmentally conscious design - Integrating environmental aspects into design and development of electrotechnical products |
| 17/30333280 DC : 0 | BS ISO 17422 - PLASTICS - ENVIRONMENTAL ASPECTS - GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS |
| 04/30113227 DC : DRAFT MAY 2004 | ISO 21507 - EARTH-MOVING MACHINERY - REQUIREMENTS FOR NON-METALLIC TANKS |
| 07/30161754 DC : 0 | BS ISO 15270 - PLASTICS - GUIDELINES FOR THE RECOVERY AND RECYCLING OF PLASTICS WASTE |
| BS EN 60286-1:2017 | Packaging of components for automatic handling Tape packaging of components with axial leads on continuous tapes |
| 11/30246444 DC : 0 | BS EN 62075 ED 2.0 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN |
| UNI EN 15347 : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES |
| 16/30276460 DC : 0 | BS ISO 8887-1 - TECHNICAL PRODUCT DOCUMENTATION - DESIGN FOR MANUFACTURING, ASSEMBLING, DISASSEMBLING AND END-OF-LIFE PROCESSING - PART 1: GENERAL CONCEPTS AND REQUIREMENTS |
| BS ISO 20140-5:2017 | Automation systems and integration. Evaluating energy efficiency and other factors of manufacturing systems that influence the environment Environmental performance evaluation data |
| 09/30214337 DC : 0 | BS EN 60286-3 - PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 3: PACKAGING OF SURFACE MOUNT COMPONENTS ON CONTINUOUS TAPES |
| BS EN ISO 16396-1:2015 | Plastics. Polyamide (PA) moulding and extrusion materials Designation system, marking of products and basis for specifications |
| 11/30199264 DC : 0 | BS ISO 13106 - PLASTICS - BLOW-MOULDED POLYPROPYLENE CONTAINERS FOR PACKAGING OF LIQUID FOODSTUFFS |
| BS EN 175301-801:2006 | Detail specification. High density rectangular connectors, round removable crimp contacts |
| BS ISO/IEC 29142-3:2013 | Information technology. Print cartridge characterization Environment |
| BS EN 61076-3-120:2016 | Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A |
| BS EN 50298:1999 | Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements |
| CSA PLUS 14021 : 2008 | ENVIRONMENTAL CLAIMS: A GUIDE FOR INDUSTRY AND ADVERTISERS |
| SAE J 2332 : 2013 | MARKING OF RUBBER PARTS |
| EN IEC 61076-2-111:2018 | Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking |
| UNE-EN 62208:2012 | Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements |
| ISO 15270:2008 | Plastics — Guidelines for the recovery and recycling of plastics waste |
| CSA SPE 7007 : 2017 | SUSTAINABILITY STANDARD FOR HOUSEHOLD MICROWAVE OVEN APPLIANCES |
| CEI EN 60286-1 : 2001 | PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 1: TAPE PACKAGING OF COMPONENTS WITH AXIAL LEADS ON CONTINUOUS TAPES |
| UNI EN 15342 : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES |
| R7005-17 | Sustainability standard for household clothes drying appliances (Binational standard with AHAM 7005-2017 and UL 7005) |
| CSA SPE 7001 : 2012 | SUSTAINABILITY STANDARD FOR HOUSEHOLD REFRIGERATION APPLIANCES |
| I.S. EN 60286-3:2013 | PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 3: PACKAGING OF SURFACE MOUNT COMPONENTS ON CONTINUOUS TAPES (IEC 60286-3:2013 (EQV)) |
| I.S. EN 175301-801:2006 | DETAIL SPECIFICATION: HIGH DENSITY RECTANGULAR CONNECTORS, ROUND REMOVABLE CRIMP CONTACTS |
| ISO 20140-5:2017 | Automation systems and integration Evaluating energy efficiency and other factors of manufacturing systems that influence the environment Part 5: Environmental performance evaluation data |
| EN ISO 14021:2016 | Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:2016) |
| I.S. EN 15551:2017 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| ISO 21507:2010 | Earth-moving machinery Performance requirements for non-metallic fuel tanks |
| ISO 14021:2016 | Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling) |
| SAE J 2642 : 2017 | RECOMMENDED PRACTICE FOR DEVELOPING SPECIFICATIONS FOR AUTOMOTIVE THERMOPLASTIC MATERIALS |
| PREN 840-4 : DRAFT 2010 | MOBILE WASTE CONTAINERS - PART 4: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1700 L WITH FLAT LID(S), FOR WIDE TRUNNION OR BG- AND/OR WIDE COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| CSA SPE 7006 : 2017 | SUSTAINABILITY STANDARD FOR HOUSEHOLD ROOM AIR CONDITIONING APPLIANCES |
| I.S. EN 60286-6:2004 | PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 6: BULK CASE PACKAGING FOR SURFACE MOUNTING COMPONENTS |
| DIN EN 15342:2008-02 | Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates |
| IEC 60286-2:2015 | Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes |
| UNE-EN ISO 14021:2017 | Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:2016) |
| ONORM EN 840-2 : 2013 | MOBILE WASTE CONTAINERS - PART 2: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH FLAT LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| ONORM EN 840-1 : 2013 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 1: CONTAINERS WITH 2 WHEELS WITH A CAPACITY UP TO 400 L FOR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| ONORM EN 840-3 : 2013 | MOBILE WASTE CONTAINERS - PART 3: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH DOME LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| ONORM EN 840-4 : 2013 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 4: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1700 L WITH FLAT LID(S), FOR WIDE TRUNNION OR BG- AND/OR WIDE COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| EN 50298:1998 | Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements |
| 14/30311585 DC : 0 | BS EN 61076-3-120 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-120: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR REWIRABLE POWER CONNECTOR WITH SNAP LOCKING FOR 250 V D.C. AND RATED CURRENT OF 30A |
| 10/30232449 DC : 0 | BS EN 840-4 - MOBILE WASTE CONTAINERS - PART 4: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1700 L WITH FLAT LID(S), FOR WIDE TRUNNION OR BG- AND/OR WIDE COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| 17/30340059 DC : 0 | BS EN 61076-3-119 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR UNSHIELDED, FREE AND FIXED 10 WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS WITH FREQUENCIES UP TO 100 MHZ |
| 10/30232443 DC : 0 | BS EN 840-2 - MOBILE WASTE CONTAINERS - PART 2: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH FLAT LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| DIN EN 15551 E : 2011 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| BS ISO 28078-1:2009 | Plastics. Poly(phenylene sulfide) (PPS) moulding and extrusion materials Designation system and basis for specifications |
| 11/30242519 DC : DRAFT JAN 2011 | BS ISO/IEC 29142-3 - CARTRIDGE CHARACTERIZATION STANDARD - PART 3: ENVIRONMENT |
| UNE-EN 16848:2017 | Bio-based products - Requirements for Business to Business communication of characteristics using a Data Sheet |
| DIN EN 15345 E : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES |
| I.S. EN 16848:2016 | BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS TO BUSINESS COMMUNICATION OF CHARACTERISTICS USING A DATA SHEET |
| ISO 20029-1:2017 | Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 1: Designation system and basis for specification |
| PREN 50290-2-20 : DRAFT 2016 | COMMUNICATION CABLES - PART 2-20: COMMON DESIGN RULES AND CONSTRUCTION - GENERAL |
| BS EN 60286-3:2013 | Packaging of components for automatic handling Packaging of surface mount components on continuous tapes |
| EN IEC 61076-3-119:2018 | Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz |
| 10/30232440 DC : 0 | BS EN 840-1 - MOBILE WASTE CONTAINERS - CONTAINERS WITH 2 WHEELS WITH A CAPACITY UP TO 400 L FOR COMB LIFTING DEVICES, DIMENSIONS AND DESIGN |
| 08/30179153 DC : DRAFT MAR 2008 | BS EN 61076-3-118 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLES + PE POWER CONNECTOR WITH PUSH-PULL COUPLING |
| NF ISO 21507 : 2010 | EARTH-MOVING MACHINERY - PERFORMANCE REQUIREMENTS FOR NON-METALLIC FUEL TANKS |
| BS EN 15345:2007 | Plastics. Recycled plastics. Characterization of polypropylene (PP) recyclates |
| UNE-EN 50290-2-20:2017 | Communication cables - Part 2-20: Common design rules and construction - General |
| BS EN 60286-4:2013 | Packaging of components for automatic handling Stick magazines for electronic components encapsulated in packages of different forms |
| CEI EN 60286-4 : 2014 | PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 4: STICK MAGAZINES FOR ELECTRONIC COMPONENTS ENCAPSULATED IN PACKAGES OF DIFFERENT FORMS |
| CSA SPE 7004 : 2015 | SUSTAINABILITY STANDARD FOR HOUSEHOLD COOKING APPLIANCES |
| I.S. EN ISO 14021:2016 | ENVIRONMENTAL LABELS AND DECLARATIONS - SELF-DECLARED ENVIRONMENTAL CLAIMS (TYPE 2 ENVIRONMENTAL LABELLING) (ISO 14021:2016) |
| CSA SPE 7008 : 2018 | SUSTAINABILITY STANDARD FOR HOUSEHOLD DEHUMIDIFIER APPLIANCES |
| I.S. EN 60286-2:2015 | PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 2: PACKAGING OF COMPONENTS WITH UNIDIRECTIONAL LEADS ON CONTINUOUS TAPES |
| PREN 840-1 : DRAFT 2010 | MOBILE WASTE CONTAINERS - CONTAINERS WITH 2 WHEELS WITH A CAPACITY UP TO 400 L FOR COMB LIFTING DEVICES, DIMENSIONS AND DESIGN |
| ECMA/TR 70 : 3ED 2004 | PRODUCT-RELATED ENVIRONMENTAL DECLARATION |
| UNE-EN 15551:2017 | Railway applications - Railway rolling stock - Buffers |
| ISO 17422:2002 | Plastics Environmental aspects General guidelines for their inclusion in standards |
| I.S. EN 62208:2011 | EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS (IEC 62208:2011) |
| I.S. EN 15345:2007 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES |
| I.S. EN 62075:2012 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 62075:2012 (EQV)) |
| I.S. EN 50290-2-20:2016 | COMMUNICATION CABLES - PART 2-20: COMMON DESIGN RULES AND CONSTRUCTION - GENERAL |
| DIN EN 840-1:2013-03 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 1: CONTAINERS WITH 2 WHEELS WITH A CAPACITY UP TO 400 L FOR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| UNI EN 840-1 : 2013 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 1: CONTAINERS WITH 2 WHEELS WITH A CAPACITY UP TO 400 L FOR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| UNI EN 840-4 : 2013 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 4: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1700 L WITH FLAT LID(S), FOR WIDE TRUNNION OR BG- AND/OR WIDE COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| BS EN 840-3:2012 | Mobile waste and recycling containers Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices. Dimensions and design |
| EN 840-3:2012 | Mobile waste and recycling containers - Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design |
| BS EN 840-2:2012 | Mobile waste and recycling containers Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices. Dimensions and design |
| I.S. EN 840-4:2012 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 4: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1700 L WITH FLAT LID(S), FOR WIDE TRUNNION OR BG- AND/OR WIDE COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| I.S. EN 840-1:2012 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 1: CONTAINERS WITH 2 WHEELS WITH A CAPACITY UP TO 400 L FOR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| 00/565497 DC : DRAFT DEC 2000 | BS IEC 60601-1 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR SAFETY AND ESSENTIAL PERFORMANCE |
| ISO 16396-1:2015 | Plastics — Polyamide (PA) moulding and extrusion materials — Part 1: Designation system, marking of products and basis for specifications |
| EN 840-1:2012 | Mobile waste and recycling containers - Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices - Dimensions and design |
| IEC 62075:2012 | Audio/video, information and communication technology equipment - Environmentally conscious design |
| IEC 60286-6:2004 | Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components |
| IEC 61076-3-118:2010 | Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for a 4 pole plus PE power connector with push-pull coupling |
| I.S. EN 840-3:2012 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 3: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH DOME LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| EN 840-2:2012 | Mobile waste and recycling containers - Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and design |
| IEC 60286-3:2013 | Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes |
| I.S. EN 840-2:2012 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 2: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH FLAT LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| UNE-EN 840-2:2013 | Mobile waste and recycling containers - Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and design |
| IEC 61076-3-120:2016 | Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A |
| PD IEC/PAS 63015:2016 | Definition of “Low-Halogen?? for electronic products |
| UNE-EN 840-3:2013 | Mobile waste and recycling containers - Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design |
| UNI EN 840-2 : 2013 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 2: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH FLAT LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| BS EN 15342:2007 | Plastics. Recycled plastics. Characterization of polystyrene (PS) recyclates |
| BS EN ISO 14021:2016 | Environmental labels and declarations. Self-declared environmental claims (Type II environmental labelling) |
| IEC 62208:2011 | Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements |
| EN 840-4:2012 | Mobile waste and recycling containers - Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices - Dimensions and design |
| EN 15342:2007 | Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates |
| EN 15347:2007 | Plastics - Recycled Plastics - Characterisation of plastics wastes |
| EN 15551:2017 | Railway applications - Railway rolling stock - Buffers |
| EN 15345:2007 | Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates |
| EN ISO 16396-1:2015 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system, marking of products and basis for specifications (ISO 16396-1:2015) |
| UNE-EN 62075:2013 | Audio/video, information and communication technology equipment - Environmentally conscious design |
| ISO 14808:1997 | Photography — Composition of 135-size film canisters |
| 05/30139061 DC : DRAFT SEP 2005 | IEC 60286-3 - PACKING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 3: PACKING OF SURFACE MOUNT COMPONENTS ON CONTINUOUS TAPES |
| 02/205601 DC : DRAFT APR 2002 | IEC 60286-6. ED. 2.0 - CAPACITORS AND RESISTORS FOR ELECTRONIC EQUIPMENT - PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 6: BULK CASE PACKAGING FOR SURFACE MOUNTING COMPONENTS |
| 16/30350953 DC : 0 | BS EN 60286-1 ED 3.0 - PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 1: TAPE PACKAGING OF COMPONENTS WITH AXIAL LEADS ON CONTINUOUS TAPES |
| DIN EN 50298 : 1999 | EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS |
| BS ISO 16365-1:2014 | Plastics. Thermoplastic polyurethanes for moulding and extrusion Designation system and basis for specifications |
| AHAM 7001 : 2015 | SUSTAINABILITY STANDARD FOR HOUSEHOLD REFRIGERATION APPLIANCES |
| 06/30156414 DC : DRAFT SEP 2006 | BS EN 60286-2 - PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 2: TAPE PACKAGING OF COMPONENTS WITH UNIDIRECTIONAL LEADS ON CONTINUOUS TAPES |
| 16/30336759 DC : 0 | BS EN 50290-2-20 - COMMUNICATION CABLES - PART 2-20: COMMON DESIGN RULES AND CONSTRUCTION - GENERAL |
| AHAM 7004 : 2017 | SUSTAINABILITY STANDARD FOR HOUSEHOLD COOKING APPLIANCES |
| BS ISO 14808:1997 | Photography. Composition of 135-film canisters |
| CEI EN 62075 : 2013 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN |
| S.R. CEN/TS 16398:2012 | PLASTICS - TEMPLATE FOR REPORTING AND COMMUNICATION OF BIO-BASED CARBON CONTENT AND RECOVERY OPTIONS OF BIOPOLYMERS AND BIOPLASTICS - DATA SHEET |
| SAE J 2594 : 2016 | RECOMMENDED PRACTICE TO DESIGN FOR RECYCLING PROTON EXCHANGE MEMBRANE (PEM) FUEL CELL SYSTEMS |
| CEI EN 175301-801 : 2007 | DETAIL SPECIFICATION: HIGH DENSITY RECTANGULAR CONNECTORS, ROUND REMOVABLE CRIMP CONTACTS |
| IEEE 1680.3-2012 | IEEE Standard for Environmental Assessment of Televisions |
| I.S. EN IEC 61076-3-119:2018 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR SHIELDED AND UNSHIELDED, FREE AND FIXED 10-WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ |
| IEEE 1680.2-2012 | IEEE Standard for Environmental Assessment of Imaging Equipment |
| I.S. EN IEC 61076-2-111:2018 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-111: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR POWER CONNECTORS WITH M12 SCREW-LOCKING |
| IEC TR 62392:2006 | Suitability of typical electrical insulating material (EIM) for polymer recycling |
| I.S. EN ISO 16396-1:2015 | PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS (ISO 16396-1:2015) |
| DIN EN 16848:2015-04 (Draft) | BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS TO BUSINESS COMMUNICATION OF CHARACTERISTICS USING A DATA SHEET |
| IEEE 1680.1-2009 | IEEE Standard for Environmental Assessment of Personal Computer Products, Including Notebook Personal Computers, Desktop Personal Computers, and Personal Computer Displays |
| 03/314451 DC : DRAFT SEP 2003 | IEC 62392 TR ED.1 - SUITABILITY OF TYPICAL ELECTRICAL INSULATING MATERIAL FOR POLYMER RECYCLING |
| EN 62075:2012/AC:2013 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 62075:2012) |
| DIN EN 840-2:2013-03 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 2: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH FLAT LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| EN 60286-6:2004 | Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components |
| EN 60286-3:2013/AC:2013 | PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 3: PACKAGING OF SURFACE MOUNT COMPONENTS ON CONTINUOUS TAPES (IEC 60286-3:2013) |
| DIN EN 840-4:2013-02 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 4: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1700 L WITH FLAT LID(S), FOR WIDE TRUNNION OR BG- AND/OR WIDE COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| EN 61076-3-120 : 2016 | Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A |
| EN 61076-3-118 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING |
| ISO 472:2013 | Plastics Vocabulary |
| ISO 1043-3:2016 | Plastics Symbols and abbreviated terms Part 3: Plasticizers |
| ISO 1043-2:2011 | Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials |
| ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
| ISO 1043-4:1998 | Plastics Symbols and abbreviated terms Part 4: Flame retardants |
£39.00
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.