Preview

Capability of detection Part 1: Terms and definitions

Amended by

ISO 11843-1:1997/Cor 1:2003

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

26-06-1997

Publisher

International Organization for Standardization

Preview

DocumentType	Standard
Pages	10
PublisherName	International Organization for Standardization
Status	Current

Standards	Relationship
DIN ISO 11843-1:2004-09	Identical
GOST R ISO 11843-1 : 2007	Identical
NEN-ISO 11843-1 :2003	Identical
BS ISO 11843-1:1997	Identical
PN ISO 11843-1 : 2003	Identical
NEN ISO 11843-1 : 2003 C1 2003	Identical
NF ISO 11843-1 : 1998	Identical
BIS IS/ISO 11843-1 : 1997	Identical
SAC GB/T 33260.1 : 2016	Identical
DIN 55350-34:1991-02	Identical
JIS Z 8462-1:2001	Identical
UNI ISO 11843-1 : 2009	Identical
SANS 11843-1 : 1ED 2009(R2014)	Identical
SS-ISO 11843-1:2005	Identical
AS ISO 11843.1-2004	Identical
DIN 55350-34:1991-02	Corresponds

IEC 63041-2:2017	Piezoelectric sensors - Part 2: Chemical and biochemical sensors
DIN EN 14793 E : 2017	STATIONARY SOURCE EMISSIONS - DEMONSTRATION OF EQUIVALENCE OF AN ALTERNATIVE METHOD WITH A REFERENCE METHOD
17/30341492 DC : 0	BS ISO 20391-1 - BIOTECHNOLOGY - CELL COUNTING - PART 1: GENERAL GUIDANCE ON CELL COUNTING METHODS
BS ISO 11843-3:2003	Capability of detection Methodology for determination of the critical value for the response variable when no calibration data are used
ISO 11843-5:2008	Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases
08/30182372 DC : DRAFT JULY 2008	BS EN 15842 - FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS
16/30342876 DC : 0	BS EN 15550 - ANIMAL FEEDING STUFFS: METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CADMIUM AND LEAD BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) AFTER PRESSURE DIGESTION
CSA ISO/TR 10017 : 2003 : R2013	GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
ISO 11843-4:2003	Capability of detection Part 4: Methodology for comparing the minimum detectable value with a given value
I.S. CEN TS 14793:2005	STATIONARY SOURCE EMISSION - INTRALABORATORY VALIDATION PROCEDURE FOR AN ALTERNATIVE METHOD COMPARED TO A REFERENCE METHOD
ISO 11843-7:2012	Capability of detection Part 7: Methodology based on stochastic properties of instrumental noise
ISO/TS 21098:2005	Foodstuffs Nucleic acid based methods of analysis of genetically modified organisms and derived products Information to be supplied and procedure for the addition of methods to ISO 21569, ISO 21570 or ISO 21571
CEN/TS 14793:2005	Stationary source emission - Intralaboratory validation procedure for an alternative method compared to a reference method
EN 14793:2017	Stationary source emissions - Demonstration of equivalence of an alternative method with a reference method
06/30112308 DC : 0	EN ISO 13530 - WATER QUALITY - GUIDANCE ON ANALYTICAL QUALITY CONTROL FOR CHEMICAL AND PHYSICOCHEMICAL WATER ANALYSIS
12/30237514 DC : 0	BS ISO 13528 - STATISTICAL METHODS FOR USE IN PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS
02/400884 DC : DRAFT OCT 2002	CAPABILITY OF DETECTION - PART 4: METHODOLOGY FOR COMPARING THE MINIMUM DETECTABLE VALUE WITH A GIVEN VALUE
UNI EN 15842 : 2010	FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS
PREN 15550 : DRAFT 2016	ANIMAL FEEDING STUFFS: METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CADMIUM AND LEAD BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) AFTER PRESSURE DIGESTION
DIN 55350-11:2008-05	Concepts for quality management - Part 11: Supplement to DIN EN ISO 9000:2005
BS ISO 16258-2:2015	Workplace air. Analysis of respirable crystalline silica by X-ray diffraction Method by indirect analysis
ISO 11843-2:2000	Capability of detection — Part 2: Methodology in the linear calibration case
DIN EN 14793:2017-05	STATIONARY SOURCE EMISSIONS - DEMONSTRATION OF EQUIVALENCE OF AN ALTERNATIVE METHOD WITH A REFERENCE METHOD
DIN EN 15842:2010-06	FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS
DD CEN/TS 14793:2005	Stationary source emission. Intralaboratory validation procedure for an alternative method compared to a reference method
ISO 16258-2:2015	Workplace air Analysis of respirable crystalline silica by X-ray diffraction Part 2: Method by indirect analysis
ISO 11843-3:2003	Capability of detection Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used
ISO 11843-6:2013	Capability of detection Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
DIN EN ISO 9169 E : 2006	AIR QUALITY - DEFINITION AND DETERMINATION OF PERFORMANCE CHARACTERISTICS OF AN AUTOMATIC MEASURING SYSTEM
BS EN 15550:2017	Animal feeding stuffs: Methods of sampling and analysis. Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion
I.S. EN 15550:2017	ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CADMIUM AND LEAD BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) AFTER PRESSURE DIGESTION
07/30148930 DC : 0	BS ISO 11843-5 - CAPABILITY OF DETECTION - PART 5: METHODOLOGY IN THE LINEAR AND NON-LINEAR CALIBRATION CASES
BS ISO 16258-1:2015	Workplace air. Analysis of respirable crystalline silica by X-ray diffraction Direct-on-filter method
DIN EN 15842 E : 2010	FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS
02/400883 DC : DRAFT OCT 2002	CAPABILITY OF DETECTION - PART 3: METHODOLOGY FOR THE DETERMINATION OF THE CRITICAL VALUE FOR THE RESPONSE VARIABLE WHEN NO CALIBRATION DATA ARE USED
BS ISO 13528:2015	Statistical methods for use in proficiency testing by interlaboratory comparison
BS EN 15842:2010	Foodstuffs. Detection of food allergens. General considerations and validation of methods
UNI ISO 11843-6 : 2014	CAPABILITY OF DETECTION - PART 6: METHODOLOGY FOR THE DETERMINATION OF THE CRITICAL VALUE AND THE MINIMUM DETECTABLE VALUE IN POISSON DISTRIBUTED MEASUREMENTS BY NORMAL APPROXIMATIONS
16/30288734 DC : 0	BS ISO 19087 - WORKPLACE AIR - ANALYSIS OF RESPIRABLE CRYSTALLINE SILICA BY FOURIER-TRANSFORM INFRARED SPECTROSCOPY
BS ISO 12828-1:2011	Validation method for fire gas analysis Limits of detection and quantification
BS ISO 11843-4:2003	Capability of detection Methodology for comparing the minimum detectable value with a given value
17/30328289 DC : 0	BS ISO 11843-7 - CAPABILITY OF DETECTION - PART 7: METHODOLOGY BASED ON STOCHASTIC PROPERTIES OF INSTRUMENTAL NOISE
ISO 20391-1:2018	Biotechnology — Cell counting — Part 1: General guidance on cell counting methods
DD ISO/TS 21098:2005	Foodstuffs. Nucleic acid based methods of analysis of genetically modified organisms and derived products. Information to be supplied and procedure for the addition of methods to ISO 21569, ISO 21570 and ISO 21571
I.S. EN IEC 63041-2:2018	PIEZOELECTRIC SENSORS - PART 2: CHEMICAL AND BIOCHEMICAL SENSORS
UNI ISO 11843-2 : 2009	CAPABILITY OF DETECTION - PART 2: METHODOLOGY IN THE LINEAR CALIBRATION CASE
DIN EN 15550 E : 2017	ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CADMIUM AND LEAD BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) AFTER PRESSURE DIGESTION
EN ISO 6143:2006	Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001)
ISO Guide 35:2017	Reference materials Guidance for characterization and assessment of homogeneity and stability
UNI ISO 11843-5 : 2014	CAPABILITY OF DETECTION - PART 5: METHODOLOGY IN THE LINEAR AND NON-LINEAR CALIBRATION CASES
I.S. EN 15842:2010	FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS
BS ISO 11843-2:2000	Capability of detection Methodology in the linear calibration case
BS EN 14793:2017	Stationary source emissions. Demonstration of equivalence of an alternative method with a reference method
UNI ISO 11843-4 : 2014	CAPABILITY OF DETECTION - PART 4: METHODOLOGY FOR COMPARING THE MINIMUM DETECTABLE VALUE WITH A GIVEN VALUE
ISO 12828-1:2011	Validation method for fire gas analysis — Part 1: Limits of detection and quantification
PD ISO/TR 10017:2003	Guidance on statistical techniques for ISO 9001:2000
04/30112961 DC : DRAFT APR 2004	BS ISO/DIS 9169 - AIR QUALITY - DEFINITION AND DETERMINATION OF PERFORMANCE CHARACTERISTICS OF AN AUTOMATIC MEASURING SYSTEM
BS ISO 11843-6:2013	Capability of detection Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
S.R. ISO/TR 10017:2003	GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
EN IEC 63041-2:2018	Piezoelectric Sensors - Part 2: Chemical and Biochemical Sensors
BS EN ISO 9169:2006	Air quality. Definition and determination of performance characteristics of an automatic measuring system
ISO 6143:2001	Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
UNE-EN 15550:2018	Animal feeding stuffs: Methods of sampling and analysis - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion
DIN EN 15550:2016-11 (Draft)	ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CADMIUM AND LEAD BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) AFTER PRESSURE DIGESTION
ISO 9169:2006	Air quality Definition and determination of performance characteristics of an automatic measuring system
BS EN ISO 6143:2006	Gas analysis. Comparison methods for determining and checking the composition of calibration gas mixtures
EN 15842:2010	Foodstuffs - Detection of food allergens - General considerations and validation of methods
EN ISO 9169:2006	Air quality - Definition and determination of performance characteristics of an automatic measuring system (ISO 9169:2006)
EN 15550:2017	Animal feeding stuffs: Methods of sampling and analysis - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion
14/30293538 DC : 0	BS EN 14793 - STATIONARY SOURCE EMISSIONS - DEMONSTRATION OF EQUIVALENCE OF AN ALTERNATIVE METHOD WITH THE REFERENCE METHOD
UNE-EN 14793:2017	Stationary source emissions - Demonstration of equivalence of an alternative method with a reference method
BS ISO 11843-7:2012	Capability of detection Methodology based on stochastic properties of instrumental noise
DIN ISO 6143 E : 2004	GAS ANALYSIS - COMPARISON METHODS FOR DETERMINING AND CHECKING THE COMPOSITION OF CALIBRATION GAS MIXTURES
10/30204124 DC : DRAFT DEC 2010	ISO/DIS 11843-6 - CAPABILITY OF DETECTION - PART 6: METHODOLOGY FOR THE DETERMINATION OF THE CRITICAL VALUE AND THE MINIMUM DETECTABLE VALUES IN POISSON DISTRIBUTION MEASUREMENTS
BS ISO 6143 : 2001 AMD 16904	GAS ANALYSIS - COMPARISON METHODS FOR DETERMINING AND CHECKING THE COMPOSITION OF CALIBRATION GAS MIXTURES
PD ISO GUIDE 35:2017	Reference materials. Guidance for characterization and assessment of homogeneity and stability
CSA ISO/TR 10017:2003	GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
BS ISO 11843-5 : 2008	CAPABILITY OF DETECTION - PART 5: METHODOLOGY IN THE LINEAR AND NON-LINEAR CALIBRATION CASES
I.S. EN 14793:2017	STATIONARY SOURCE EMISSIONS - DEMONSTRATION OF EQUIVALENCE OF AN ALTERNATIVE METHOD WITH A REFERENCE METHOD
UNI ISO 11843-7 : 2014	CAPABILITY OF DETECTION - PART 7: METHODOLOGY BASED ON STOCHASTIC PROPERTIES OF INSTRUMENTAL NOISE
ISO 13528:2015	Statistical methods for use in proficiency testing by interlaboratory comparison
ISO 16258-1:2015	Workplace air Analysis of respirable crystalline silica by X-ray diffraction Part 1: Direct-on-filter method
ISO/TR 10017:2003	Guidance on statistical techniques for ISO 9001:2000
ISO/TS 13530:2009	Water quality — Guidance on analytical quality control for chemical and physicochemical water analysis
DIN EN ISO 9169:2006-09	Air quality - Definition and determination of performance characteristics of an automatic measuring system (ISO 9169:2006)
DIN ISO 6143:2004-05	GAS ANALYSIS - COMPARISON METHODS FOR DETERMINING AND CHECKING THE COMPOSITION OF CALIBRATION GAS MIXTURES
DIN EN ISO 6143:2006-11	Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001)
DIN EN 15550:2017-10	ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CADMIUM AND LEAD BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) AFTER PRESSURE DIGESTION

ISO/IEC Guide 99:2007	International vocabulary of metrology Basic and general concepts and associated terms (VIM)
ISO 3534-3:2013	Statistics — Vocabulary and symbols — Part 3: Design of experiments
ISO 3534-1:2006	Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability