ISO 1219-1:2012
Current
The latest, up-to-date edition.
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
21-05-2012
ISO 1219-1:2012 establishes basic elements for symbols. It specifies rules for devising fluid power symbols for use on components and in circuit diagrams.
ISO 1219-1:2012 is a collective application standard of the ISO 14617 series. In ISO 1219-1:2012, the symbols are designed in fixed dimensions to be used directly in data processing systems, which might result in different variants.
DevelopmentNote |
Supersedes ISO 1219 (04/2001) Supersedes NFPA T3.10.18 (09/2004) Supersedes NFPA T3.10.4 (04/2008) Supersedes ISO/DIS 1219-1. (05/2012)
|
DocumentType |
Standard
|
Pages |
178
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NS ISO 1219-1 : 2012 | Identical |
BS ISO 1219-1 : 2012 | Identical |
SS-ISO 1219-1 : 2012 | Identical |
NF ISO 1219-1 : 2012 | Identical |
IS 7513 : Part 1 : 2019 | Identical |
DIN ISO 1219-1:2007-12 | Identical |
BS ISO 1219-1:2012+A1:2016 | Identical |
DIN ISO 1219:1978-08 | Corresponds |
NBN ISO 1219 1 : 1993 | Identical |
SNV ISO 1219-1 : 1991 | Identical |
UNI ISO 1219-1 : 1994 | Identical |
NEN ISO 1219-1 : 2006 | Identical |
11/30251717 DC : 0 | BS EN 81-20 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
UNE-EN ISO 4414:2011 | Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) |
BS ISO 4392-1:2002 | Hydraulic fluid power. Determination of characteristics of motors At constant low speed and constant pressure |
BS 7403-12:2000 | Full-flow lubricating oil filters for internal combustion engines Filtration efficiency using particle counting, and contaminant retention capacity |
BS EN 81-31:2010 | Safety rules for the construction and installation of lifts. Lifts for the transport of goods only Accessible goods only lifts |
ISO 4548-14:2016 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 14: Cold start simulation and hydraulic pulse durability for composite filter housings |
I.S. EN 12415:2000 | SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
13/30250817 DC : 0 | BS ISO 6953-2 - PNEUMATIC FLUID POWER - COMPRESSED AIR PRESSURE REGULATORS AND FILTER-REGULATORS - PART 2: TEST METHODS TO DETERMINE THE MAIN CHARACTERISTICS TO BE INCLUDED IN LITERATURE FROM SUPPLIERS |
ISO 7789:2007 | Hydraulic fluid power Two-, three- and four-port screw-in cartridge valves Cavities |
ISO/TS 22595-1:2006 | Dentistry Plant area equipment Part 1: Suction systems |
BS ISO 5599-2:2001 | Pneumatic fluid power. Five-port directional control valves Mounting interface surfaces with optional electrical connector |
BIS IS 8384 : 2013 | HYDRAULIC FLUID POWER - FILTER ELEMENTS - VERIFICATION OF COLLAPSE/BURST PRESSURE RATING |
08/30176286 DC : DRAFT JAN 2008 | BS ISO 6358-3 - PNEUMATIC FLUID POWER - DETERMINATION OF FLOW-RATE CHARACTERISTICS OF COMPONENTS USING COMPRESSIBLE FLUIDS - PART 3: DISCHARGE TEST AS AN ALTERNATE TEST METHOD |
DIN ISO 12238 E : 2005 | PNEUMATIC FLUID POWER - DIRECTIONAL CONTROL VALVES - MEASUREMENT OF SHIFTING TIME |
BS ISO 16908:2014 | Hydraulic filter element test methods. Thermal conditioning and cold start-up simulation |
13/30258990 DC : 0 | BS ISO 16908 - HYDRAULIC FILTER ELEMENT TEST METHODS - THERMAL CONDITIONING AND COLD START-UP SIMULATION |
NFPA T3.21.3 : 2008 : R2013 | PNEUMATIC FLUID POWER - FLOW RATING TEST PROCEDURE AND REPORTING METHOD - FOR FIXED ORIFICE COMPONENTS |
BS ISO 11011 : 2013 | COMPRESSED AIR - ENERGY EFFICIENCY - ASSESSMENT |
BS ISO 14085-3:2015 | Aerospace series. Hydraulic filter elements. Test methods Filtration efficiency and retention capacity |
ISO 1217:2009 | Displacement compressors Acceptance tests |
BS 7403-11:1998 | Full-flow lubricating oil filters for internal combustion engines Methods of test for self-cleaning filters |
08/30176283 DC : DRAFT JAN 2008 | BS ISO 6358-2 - PNEUMATIC FLUID POWER - DETERMINATION OF FLOW-RATE CHARACTERISTICS OF COMPONENTS USING COMPRESSIBLE FLUIDS - PART 2: GENERAL RULES |
BS 7403-1:1998 | Full-flow lubricating oil filters for internal combustion engines Methods of test for differential pressure/flow characteristics |
13/30271038 DC : 0 | BS ISO 14085-4 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 4: VERIFICATION OF COLLAPSE/BURST PRESSURE RATING |
14/30280597 DC : 0 | BS ISO 1219-3 - FLUID POWER SYSTEMS AND COMPONENTS - GRAPHICAL SYMBOLS AND CIRCUIT DIAGRAMS - PART 3: SYMBOL MODULES AND CONNECTED SYMBOLS IN CIRCUIT DIAGRAMS |
BS ISO 10770-3:2007 | Hydraulic fluid power. Electrically modulated hydraulic control valves Test methods for pressure control valves |
BS ISO 19438:2003 | Diesel fuel and petrol filters for internal combustion engines. Filtration efficiency using particle counting and contaminant retention capacity |
I.S. EN ISO 8230-1:2008 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
NFPA T3.21.8 : 2008 : R2013 | PNEUMATIC FLUID POWER - MEASUREMENT OF RESPONSE TIME - DIRECTIONAL CONTROL VALVES |
00/716569 DC : DRAFT NOV 2000 | PREN 1804-3 - MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS |
09/30196757 DC : 0 | BS ISO 10041-2 - PNEUMATIC FLUID POWER - ELECTRICALLY MODULATED PNEUMATIC FLOW RATE CONTROL VALVES - PART 2: TEST METHODS TO DETERMINATE MAIN CHARACTERISTICS TO INCLUDE IN THE SUPPLIER'S LITERATURE FOR THREE-PORT CONTROL VALVES |
05/30075032 DC : DRAFT AUG 2005 | ISO 23181 - HYDRAULIC FLUID POWER - FILTER ELEMENTS - DETERMINATION OF RESISTANCE TO FLOW FATIGUE USING HIGH VISCOSITY FLUID |
MIL-STD-3001-1 Revision A:2014 | PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS (PART 1 OF 8 PARTS) |
BS ISO 13357-2:2017 | Petroleum products. Determination of the filterability of lubricating oils Procedure for dry oils |
SAE J 2311 : 2015 | AUTOMATIC TRANSMISSION HYDRAULIC PUMP TEST PROCEDURE |
UNE-EN ISO 4413:2011 | Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
NFPA T3.21.8 : 2008 | PNEUMATIC FLUID POWER - MEASUREMENT OF RESPONSE TIME - DIRECTIONAL CONTROL VALVES |
EN 15339-2:2007 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units |
ISO 10770-2:2012 | Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 2: Test methods for three-port directional flow-control valves |
ISO 4548-11:1997 | Methods of test for full-flow lubricating oil filters for internal combustion engines Part 11: Self-cleaning filters |
ISO 14617-1:2005 | Graphical symbols for diagrams Part 1: General information and indexes |
BS EN ISO 4414:2010 | Pneumatic fluid power. General rules and safety requirements for systems and their components |
ISO 1219-2:2012 | Fluid power systems and components — Graphical symbols and circuit diagrams — Part 2: Circuit diagrams |
UNI 10411-2 : 2014 | MODIFICATION OF HYDRAULIC LIFTS NOT COMPLYING WITH DIRECTIVE 95/16/EC |
ISO 13357-2:2017 | Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils |
BS ISO 6358-2:2013 | Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids Alternative test methods |
ISO 16889:2008 | Hydraulic fluid power Filters Multi-pass method for evaluating filtration performance of a filter element |
ISO 15086-3:2008 | Hydraulic fluid power — Determination of the fluid-borne noise characteristics of components and systems — Part 3: Measurement of hydraulic impedance |
UNI EN 81-20 : 2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
DIN EN 1804-3:2010-05 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems (includes Amendment A1:2010) |
NFPA 750 : 2015 | WATER MIST FIRE PROTECTION SYSTEMS |
BS ISO 27407:2010 | Hydraulic fluid power. Marking of performance characteristics on hydraulic filters |
17/30356606 DC : 0 | BS ISO 8100-1 - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 1: SAFETY REQUIREMENTS FOR PASSENGER AND GOODS PASSENGER LIFTS |
BS EN ISO 10472-1:2008 | Safety requirements for industrial laundry machinery Common requirements |
I.S. EN 13443-2:2005 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 2: PARTICLE RATING 1 [MU]M TO LESS THAN 80 [MU]M - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
EN ISO 23125:2015 | Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15) |
DIN ISO 12238:2005-12 | Pneumatic fluid power - Directional control valves - Measurement of shifting time (ISO 12238:2001) |
DIN EN 81-2:2000-05 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
EN 13443-2:2005+A1:2007 | Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 µm to less than 80 µm - Requirements for performance, safety and testing |
DIN EN 982:2009-06 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS |
EN 12478:2000/AC:2001 | SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
BS ISO 4548-15:2014 | Methods of test for full-flow lubricating oil filters for internal combustion engines Vibration fatigue test for composite filter housings |
BS 7403-9:1995 | Full-flow lubricating oil filters for internal combustion engines Method of test for inlet and outlet anti-drain valves |
04/30022943 DC : DRAFT NOV 2004 | BS ISO 12500-2 - FILTERS FOR COMPRESSED AIR - METHODS OF TEST - PART 2: OIL VAPOURS |
ISO/TS 13353:2002 | Diesel fuel and petrol filters for internal combustion engines Initial efficiency by particule counting |
BS 7403-4:1998 | Full-flow lubricating oil filters for internal combustion engines Methods of test for initial particle retention efficiency, life and cumulative efficiency (gravimetric method) |
BS ISO 14085-4:2015 | Aerospace series. Hydraulic filter elements. Test methods Verification of collapse/burst pressure rating |
ISO 8573-8:2004 | Compressed air — Part 8: Test methods for solid particle content by mass concentration |
00/707842 DC : DRAFT APR 2000 | ISO/CD 17559 - HYDRAULIC FLUID POWER - TEST METHOD FOR ELECTRICITY CONTROLLED OIL HYDRAULIC PUMPS |
ISO 4409:2007 | Hydraulic fluid power Positive-displacement pumps, motors and integral transmissions Methods of testing and presenting basic steady state performance |
BS ISO 15407-2:2003 | Pneumatic fluid power. Five-port directional control valves, sizes 18 mm and 26 mm Mounting interface surfaces with optional electrical connector |
ISO/TS 16332:2006 | Diesel engines Fuel filters Method for evaluating fuel/water separation efficiency |
BS ISO 11727:1999 | Pneumatic fluid power. Identification of ports and control mechanisms of control valves and other components |
11/30182572 DC : 0 | BS ISO 11011 - COMPRESSED AIR - ENERGY EFFICIENCY - ASSESSMENT |
BS ISO 19973-2:2015 | Pneumatic fluid power. Assessment of component reliability by testing Directional control valves |
BS ISO 2941:2009 | Hydraulic fluid power. Filter elements. Verification of collapse/burst pressure rating |
BS ISO 15086-2:2000 | Hydraulic fluid power. Determination of fluid-borne noise characteristics of components and systems Measurement of speed of sound in a fluid in a pipe |
BS ISO 8426:2008 | Hydraulic fluid power. Positive displacement pumps and motors. Determination of derived capacity |
ISO 16908:2014 | Hydraulic filter element test methods Thermal conditioning and cold start-up simulation |
BS ISO 4548-9:2008 | Methods of test for full-flow lubricating oil filters for internal combustion engines Inlet and outlet anti-drain valve tests |
ISO 12500-2:2007 | Filters for compressed air — Test methods — Part 2: Oil vapours |
08/30186852 DC : DRAFT JULY 2008 | BS EN ISO 4413 - HYDRAULIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS |
BS 7403-2:1998 | Full-flow lubricating oil filters for internal combustion engines Method of test for element by-pass valve characteristics |
BS EN ISO 8230-1:2008 | Safety requirements for dry-cleaning machines Common safety requirements |
BS ISO 10767-3:1999 | Hydraulic fluid power. Determination of pressure ripple levels generated in systems and components Method for motors |
BS ISO 14085-5:2015 | Aerospace series. Hydraulic filter elements. Test methods Resistance to flow fatigue |
ISO 6358-2:2013 | Pneumatic fluid power Determination of flow-rate characteristics of components using compressible fluids Part 2: Alternative test methods |
BS ISO 1219-2:2012 | Fluid power systems and components. Graphical symbols and circuit diagrams Circuit diagrams |
BS EN ISO 11011:2015 | Compressed air. Energy efficiency. Assessment |
BS ISO 7183:2007 | Compressed-air dryers. Specifications and testing |
NF ISO 12500-3 : 2009 | FILTERS FOR COMPRESSED AIR - TEST METHODS - PART 3: PARTICULATES |
08/30168462 DC : DRAFT APR 2008 | BS ISO 1217 - DISPLACEMENT COMPRESSORS - ACCEPTANCE TEST |
BS ISO 8573-8:2004 | Compressed air Test methods for solid particle content by mass concentration |
NFPA T3.21.3 : 2008 | PNEUMATIC FLUID POWER - FLOW RATING TEST PROCEDURE AND REPORTING METHOD - FOR FIXED ORIFICE COMPONENTS |
BS ISO 17559:2003 | Hydraulic fluid power. Electrically controlled hydraulic pumps. Test methods to determine performance characteristics |
05/30125047 DC : DRAFT JAN 2005 | ISO 19973-3 - PNEUMATIC FLUID POWER - DETERMINATION OF RELIABILITY BY TESTING - PART 3: PISTON ROD CYLINDERS |
18/30358591 DC : 0 | BS ISO 4411 - HYDRAULIC FLUID POWER - VALVES - DETERMINATION OF PRESSURE DIFFERENTIAL/FLOW CHARACTERISTICS |
DIN EN ISO 4414:2011-04 | Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) |
I.S. EN ISO 6412-1:2018 | TECHNICAL PRODUCT DOCUMENTATION - SIMPLIFIED REPRESENTATION OF PIPELINES - PART 1: GENERAL RULES AND ORTHOGONAL REPRESENTATION (ISO 6412-1:2017) |
UNI ISO 5598 : 2012 | FLUID POWER SYSTEMS AND COMPONENTS - VOCABULARY |
SAE J 747 : 2017 | CONTROL VALVE TEST PROCEDURE |
BS ISO 16889 : 2008 | HYDRAULIC FLUID POWER - FILTERS - MULTI-PASS METHOD FOR EVALUATING FILTRATION PERFORMANCE OF A FILTER ELEMENT |
DIN ISO 1219-2:1996-11 | FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS AND CIRCUIT DIAGRAMS - PART 2: CIRCUIT DIAGRAMS |
ISO 3968:2017 | Hydraulic fluid power — Filters — Evaluation of differential pressure versus flow |
ISO 1219-3:2016 | Fluid power systems and components — Graphical symbols and circuit diagrams — Part 3: Symbol modules and connected symbols in circuit diagrams |
ISO 2942:2004 | Hydraulic fluid power Filter elements Verification of fabrication integrity and determination of the first bubble point |
ISO 20401:2017 | Pneumatic fluid power systems — Directional control valves — Specification of pin assignment for 8 mm and 12 mm diameter electrical round connectors |
ISO/TR 18569:2004 | Safety of machinery Guidelines for the understanding and use of safety of machinery standards |
ISO 7183:2007 | Compressed-air dryers Specifications and testing |
NF EN 1804-3 : 2006 + A1 2010 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS |
DIN EN 81-20 E : 2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
BS ISO 17082:2004 | Pneumatic fluid power. Valves. Data to be included in supplier literature |
BS EN 13443-2 : 2005 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 2: PARTICLE RATING 1 MICROMETER TO LESS THAN 80 MICROMETER - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
ISO 10472-1:1997 | Safety requirements for industrial laundry machinery Part 1: Common requirements |
08/30170008 DC : DRAFT SEP 2008 | BS ISO 27407 - HYDRAULIC FLUID POWER - MARKING OF PERFORMANCE CHARACTERISTICS ON HYDRAULIC FILTERS |
UNE-EN 81-20:2017 | Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 20: Passenger and goods passenger lifts |
UNI EN 1804-3 : 2010 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS |
I.S. EN 1804-3:2006 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS |
I.S. EN 14652:2006 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
I.S. EN ISO 128-20:2002 | TECHNICAL DRAWINGS - GENERAL PRINCIPLES OF PRESENTATION - PART 20: BASIC CONVENTIONS FOR LINES |
I.S. EN ISO 10472-1:2008 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS |
DIN EN 15339-2:2007-06 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units |
EN 1804-3:2006+A1:2010 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems |
I.S. EN 81-3:2000 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 3: ELECTRIC AND HYDRAULIC SERVICE LIFTS |
I.S. EN 81-2:1999 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
ANSI B11 TR6 : 2010 | MACHINES - SAFETY CONTROL SYSTEM FOR MACHINE TOOLS |
ISO 4548-1:1997 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 1: Differential pressure/flow characteristics |
DIN EN ISO 4413:2011-04 | Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
NF EN ISO 4414 : 2011 | PNEUMATIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS |
03/319909 DC : DRAFT NOV 2003 | BS EN 14817 - RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - AIR-SPRING CONTROL ELEMENTS |
16/30330392 DC : 0 | BS ISO 20401 - PNEUMATIC FLUID POWER SYSTEMS - DIRECTIONAL CONTROL VALVES - SPECIFICATION OF PIN ASSIGNMENT FOR ELECTRICAL ROUND CONNECTORS OF DIAMETERS 8 MM AND 12 MM |
13/30271041 DC : 0 | BS ISO 14085-5 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 5: RESISTANCE TO FLOW FATIGUE |
17/30362085 DC : 0 | BS ISO 14617 - GRAPHICAL SYMBOLS FOR DIAGRAMS |
BS ISO 8643:2017 | Earth-moving machinery. Hydraulic excavator and backhoe loader lowering control device. Requirements and tests |
BS ISO 7789:2007 | Hydraulic fluid power. Two-, three- and four-port screw-in cartridge valves. Cavities |
13/30294749 DC : 0 | BS ISO 19973-2 - PNEUMATIC FLUID POWER - ASSESSMENT OF COMPONENT RELIABILITY BY TESTING - PART 2: DIRECTIONAL CONTROL VALVES |
I.S. EN 12840:2001 | SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
BS ISO 10770-2:2012 | Hydraulic fluid power. Electrically modulated hydraulic control valves Test methods for three-port directional flow-control valves |
BS ISO 19973-3:2015 | Pneumatic fluid power. Assessment of component reliability by testing Cylinders with piston rod |
BS ISO 4020:2001 | Road vehicles. Fuel filters for diesel engines.Test methods |
BS ISO 10094-2:2010 | Pneumatic fluid power. Electro-pneumatic pressure control valves Test methods to determine main characteristics to include in the supplier\'s literature |
14/30304019 DC : 0 | BS ISO 5781 - HYDRAULIC FLUID POWER - PRESSURE-REDUCING VALVES, SEQUENCE VALVES, UNLOADING VALVES, THROTTLE VALVES AND CHECK VALVES - MOUNTING SURFACES |
BS ISO 12500-3:2009 | Filters for compressed air. Test methods Particulates |
BS ISO 10041-2:2010 | Pneumatic fluid power. Electro-pneumatic continuous flow control valves Test methods to determine main characteristics to include in the supplier\'s literature |
UNI EN ISO 8230-1 : 2009 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
BS ISO 6263:2013 | Hydraulic fluid power. Compensated flow-control valves. Mounting surfaces |
16/30317112 DC : 0 | BS ISO 3968 - HYDRAULIC FLUID POWER - FILTERS - EVALUATION OF DIFFERENTIAL PRESSURE VERSUS FLOW |
FM 5580 : 2012 | HYBRID (WATER AND INERT GAS) FIRE EXTINGUISHING SYSTEMS |
BS ISO 5598:2008 | Fluid power systems and components. Vocabulary |
BS ISO 19973-4:2014 | Pneumatic fluid power. Assessment of component reliability by testing Pressure regulators |
15/30271100 DC : 0 | BS ISO 16332 - DIESEL ENGINES - FUEL FILTERS - METHOD FOR EVALUATING FUEL/ WATER SEPARATION EFFICIENCY |
04/30108990 DC : DRAFT FEB 2004 | ISO 17567 - AGRICULTURE AND FORESTRY TRACTORS AND IMPLEMENTS - HYDRAULIC POWER BEYOND |
BS ISO 4392-2:2002 | Hydraulic fluid power. Determination of characteristics of motors Startability |
97/711340 DC : DRAFT JUL 1997 | ISO/CD 5598 - FLUID POWER SYSTEMS - TERMINOLOGY, CLASSIFICATION AND SYMBOLS |
MIL-STD-40051-2 Revision C:2015 | PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR PAGE-BASED TECHNICAL MANUALS (TMS) |
BS ISO 14085-2:2015 | Aerospace series. Hydraulic filter elements. Test methods Conditioning |
BS ISO 20401:2017 | Pneumatic fluid power systems. Directional control valves. Specification of pin assignment for 8 mm and 12 mm diameter electrical round connectors |
14/30292494 DC : 0 | BS EN ISO 22476-15 - GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 15: MEASURING WHILE DRILLING |
ISO 15407-2:2003 | Pneumatic fluid power — Five-port directional control valves, sizes 18 mm and 26 mm — Part 2: Mounting interface surfaces with optional electrical connector |
BS 7403-3:1998 | Full-flow lubricating oil filters for internal combustion engines Methods of test for resistance to high differential pressure and to elevated temperature |
BS ISO 3968:2017 | Hydraulic fluid power. Filters. Evaluation of differential pressure versus flow |
ISO 6358-1:2013 | Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 1: General rules and test methods for steady-state flow |
ISO 27407:2010 | Hydraulic fluid power Marking of performance characteristics on hydraulic filters |
BS ISO 1217 : 2009 | DISPLACEMENT COMPRESSORS - ACCEPTANCE TESTS |
ISO 4548-9:2008 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 9: Inlet and outlet anti-drain valve tests |
I.S. EN 15339-2:2007 | THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 2: GAS CONTROL UNITS |
ISO 6301-2:2006 | Pneumatic fluid power Compressed-air lubricators Part 2: Test methods to determine the main characteristics to be included in supplier's literature |
ISO 4548-12:2017 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 12: Filtration efficiency using particle counting and contaminant retention capacity |
ISO 19973-4:2014 | Pneumatic fluid power Assessment of component reliability by testing Part 4: Pressure regulators |
EN ISO 6412-1:2018 | Technical product documentation - Simplified representation of pipelines - Part 1: General rules and orthogonal representation (ISO 6412-1:2017) |
UNI EN 81-31 : 2010 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS |
UNE-EN ISO 23125:2015 | Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15) |
ISO 5598:2008 | Fluid power systems and components Vocabulary |
BS ISO 18413:2015 | Hydraulic fluid power. Cleanliness of components. Inspection document and principles related to contaminant extraction and analysis, and data reporting |
ISO 10770-3:2007 | Hydraulic fluid power Electrically modulated hydraulic control valves Part 3: Test methods for pressure control valves |
ISO 19438:2003 | Diesel fuel and petrol filters for internal combustion engines — Filtration efficiency using particle counting and contaminant retention capacity |
ISO 4548-4:1997 | Methods of test for full-flow lubricating oil filters for internal combustion engines Part 4: Initial particle retention efficiency, life and cumulative efficiency (gravimetric method) |
ISO 6953-2:2015 | Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to be included in literature from suppliers |
ISO 12500-1:2007 | Filters for compressed air Test methods Part 1: Oil aerosols |
ISO 4392-2:2002 | Hydraulic fluid power Determination of characteristics of motors Part 2: Startability |
ISO 10767-3:1999 | Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 3: Method for motors |
ISO 5781:2016 | Hydraulic fluid power Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves Mounting surfaces |
ISO/TS 23556:2007 | Performance test method for diesel engine soot-removal devices in lubricating oils Initial filtration efficiency |
ISO 10770-1:2009 | Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 1: Test methods for four-port directional flow-control valves |
DIN EN ISO 10472-1:2009-10 | Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997) |
DIN EN 13443-2:2007-10 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 2: PARTICLE RATING 1 MUM TO LESS THAN 80 MUM - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
BS EN ISO 9905 : 1998 | TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 1 |
BS EN 14817:2006 | Railway applications. Suspension components. Air-spring control elements |
UNE-EN 81-2:2001 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS. |
EN ISO 8230-1:2008 | Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008) |
EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
UNI EN 81-3 : 2008 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 3: ELECTRIC AND HYDRAULIC SERVICE LIFTS |
UNI EN 81-2 : 2010 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
UNI EN ISO 9905 : 2011 | TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 1 |
UNI EN 983 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS |
UNI EN 982 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS |
UNI EN ISO 10472-1 : 2009 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS |
ISO 6263:2013 | Hydraulic fluid power — Compensated flow-control valves — Mounting surfaces |
BS ISO 6358-1:2013 | Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids General rules and test methods for steady-state flow |
DIN EN ISO 11011:2015-08 | COMPRESSED AIR - ENERGY EFFICIENCY - ASSESSMENT (ISO 11011:2013) |
13/30294752 DC : 0 | BS ISO 19973-3 - PNEUMATIC FLUID POWER - ASSESSMENT OF COMPONENT RELIABILITY BY TESTING - PART 3: CYLINDERS WITH PISTON ROD |
BS ISO 14084-2:2015 | Process diagrams for power plants Graphical symbols |
13/30209314 DC : 0 | BS ISO 14084-2 - PROCESS DIAGRAMS FOR POWER PLANTS - PART 2: GRAPHICAL SYMBOLS |
I.S. EN ISO 5199:2002 | TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 2 |
04/30022935 DC : DRAFT NOV 2004 | BS ISO 12500-1 - FILTERS FOR COMPRESSED AIR - METHODS OF TEST - PART 1: OIL AEROSOILS |
13/30271035 DC : 0 | BS ISO 14085-3 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 3: FILTRATION EFFICIENCY AND RETENTION CAPACITY |
13/30271032 DC : 0 | BS ISO 14085-2 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 2: CONDITIONING |
17/30325994 DC : 0 | BS ISO 4409 - HYDRAULIC FLUID POWER - POSITIVE-DISPLACEMENT PUMPS, MOTORS AND INTEGRAL TRANSMISSIONS - METHODS OF TESTING AND PRESENTING BASIC STEADY STATE PERFORMANCE |
BS ISO 8573-9:2004 | Compressed air Test methods for liquid water content |
05/30128814 DC : DRAFT NOV 2005 | ISO 19973-4 - PNEUMATIC FLUID POWER - ASSESSMENT OF COMPONENT RELIABILITY BY TESTING - PART 4: PRESSURE REGULATORS |
I.S. EN 12478:2000 | SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
BS ISO 2942:2004 | Hydraulic fluid power. Filter elements. Verification of fabrication integrity and determination of the first bubble point |
BS ISO 5782-1:2017 | Pneumatic fluid power. Compressed air filters Main characteristics to be included in supplier\'s literature and product-marking requirements |
BS ISO 12500-1:2007 | Filters for compressed air. Test methods Oil aerosols |
BS ISO 10770-1:2009 | Hydraulic fluid power. Electrically modulated hydraulic control valves Test methods for four-port directional flow-control valves |
BS ISO 12238:2001 | Pneumatic fluid power. Directional control valves. Measurement of shifting time |
BS ISO 13357-1:2017 | Petroleum products. Determination of the filterability of lubricating oils Procedure for oils in the presence of water |
BS ISO 6953-2:2015 | Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Test methods to determine the main characteristics to be included in literature from suppliers |
00/704298 DC : DRAFT FEB 2000 | ISO/CD 2941 - HYDRAULIC FLUID POWER - FILTER ELEMENTS - VERIFICATION OF COLLAPSE/BURST PRESSURE RATING |
09/30196676 DC : DRAFT OCT 2009 | BS ISO 1219-2 - FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS AND CIRCUIT DIAGRAMS - PART 2: CIRCUIT DIAGRAMS |
15/30316146 DC : 0 | BS ISO 13357-1 - PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 1: PROCEDURE FOR OILS IN THE PRESENCE OF WATER |
DIN ISO 13357-1:2009-04 | PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 1: PROCEDURE FOR OILS IN THE PRESENCE OF WATER |
11/30240403 DC : 0 | BS ISO 10770-2 - HYDRAULIC FLUID POWER - ELECTRICALLY MODULATED HYDRAULIC CONTROL VALVES - PART 2: TEST METHODS FOR THREE-WAY DIRECTIONAL FLOW CONTROL VALVES |
02/710642 DC : DRAFT SEP 2002 | BS ISO 2942 - HYDRAULIC FLUID POWER - FILTER ELEMENTS - VERIFICATION OF FABRICATION INTEGRITY AND DETERMINATION OF THE FIRST BUBBLE POINT |
ISO 4548-3:1997 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 3: Resistance to high differential pressure and to elevated temperature |
02/707919 DC : DRAFT JUN 2002 | BS ISO 8573-8 - COMPRESSED AIR - PART 8: TEST METHODS FOR SOLID PARTICLE CONTENT BY MASS CONCENTRATION |
09/30196686 DC : 0 | BS ISO 10094-2 - PNEUMATIC FLUID POWER - ELECTRICALLY MODULATED PNEUMATIC PRESSURE CONTROL VALVES - PART 2: TEST METHODS TO DETERMINE MAIN CHARACTERISTICS TO INCLUDE IN THE SUPPLIER'S LITERATURE |
02/708160 DC : DRAFT JUN 2002 | BS ISO 8573-9 - COMPRESSED AIR - PART 9: TEST METHODS FOR LIQUID WATER CONTENT |
DIN EN ISO 11011 E : 2015 | COMPRESSED AIR - ENERGY EFFICIENCY - ASSESSMENT (ISO 11011:2013) |
BS ISO 6264:1998 | Hydraulic fluid power. Pressure-relief valves. Mounting surfaces |
BS ISO 8573-6:2003 | Compressed air Test methods for gaseous contaminant content |
16/30316730 DC : 0 | BS ISO 4548-12 - METHODS OF TEST FOR FULL-FLOW LUBRICATING OIL FILTERS FOR INTERNAL COMBUSTION ENGINES - PART 12: FILTRATION EFFICIENCY USING PARTICLE COUNTING, AND CONTAMINANT RETENTION CAPACITY |
07/30164305 DC : 0 | BS ISO 12500-3 - FILTERS FOR COMPRESSED AIR - TEST METHODS - PART 3: PARTICULATES |
BS EN ISO 23125:2015 | Machine tools. Safety. Turning machines |
BS ISO 4413:1998 | Hydraulic fluid power. General rules relating to systems |
ISO 11943:1999 | Hydraulic fluid power On-line automatic particle-counting systems for liquids Methods of calibration and validation |
ISO 8573-9:2004 | Compressed air — Part 9: Test methods for liquid water content |
NF ISO 10770-1 : 2009 | HYDRAULIC FLUID POWER - ELECTRICALLY MODULATED HYDRAULIC CONTROL VALVES - PART 1: TEST METHODS FOR FOUR-PORT DIRECTIONAL FLOW-CONTROL VALVES |
NF EN 81-31 : 2011 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS |
DIN EN 81-31:2010-08 | Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts |
07/30163925 DC : 0 | BS ISO 4411 - HYDRAULIC FLUID POWER - VALVES - DETERMINATION OF PRESSURE DIFFERENTIAL/FLOW CHARACTERISTICS |
NF ISO 10041-2 : 2010 | PNEUMATIC FLUID POWER - ELECTRO-PNEUMATIC CONTINUOUS FLOW CONTROL VALVES - PART 2: TEST METHODS TO DETERMINE MAIN CHARACTERISTICS TO INCLUDE IN THE SUPPLIER'S LITERATURE |
UNI ISO 4411 : 2012 | HYDRAULIC FLUID POWER - VALVES - DETERMINATION OF PRESSURE DIFFERENTIAL/FLOW CHARACTERISTICS |
DIN EN ISO 8230-1:2009-05 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
ISO 10637:1999 | Dental equipment High- and medium-volume suction systems |
BS ISO 1219-3:2016 | Fluid power systems and components. Graphical symbols and circuit diagrams Symbol modules and connected symbols in circuit diagrams |
ISO 12500-3:2009 | Filters for compressed air Test methods Part 3: Particulates |
ISO 5599-2:2001 | Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector |
ISO 19973-3:2015 | Pneumatic fluid power Assessment of component reliability by testing Part 3: Cylinders with piston rod |
ISO 8426:2008 | Hydraulic fluid power Positive displacement pumps and motors Determination of derived capacity |
S.R. CWA 16221:2010 | VEHICLE SECURITY BARRIERS - PERFORMANCE REQUIREMENTS, TEST METHODS AND GUIDANCE ON APPLICATION |
ISO 2941:2009 | Hydraulic fluid power Filter elements Verification of collapse/burst pressure rating |
I.S. EN ISO 11011:2015 | COMPRESSED AIR - ENERGY EFFICIENCY - ASSESSMENT (ISO 11011:2013) |
BS ISO 4409:2007 | Hydraulic fluid power. Positive-displacement pumps, motors and integral transmissions. Methods of testing and presenting basic steady state performance |
SAE J 2312 : 2013 | AUTOMATIC TRANSMISSION INTAKE FILTER TEST PROCEDURE |
ISO 6412-1:2017 | Technical product documentation — Simplified representation of pipelines — Part 1: General rules and orthogonal representation |
ISO 4392-1:2002 | Hydraulic fluid power — Determination of characteristics of motors — Part 1: At constant low speed and constant pressure |
ISO 17559:2003 | Hydraulic fluid power — Electrically controlled hydraulic pumps — Test methods to determine performance characteristics |
ISO 13357-1:2017 | Petroleum products — Determination of the filterability of lubricating oils — Part 1: Procedure for oils in the presence of water |
ISO 19973-2:2015 | Pneumatic fluid power Assessment of component reliability by testing Part 2: Directional control valves |
ISO 19973-5:2015 | Pneumatic fluid power Assessment of component reliability by testing Part 5: Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves |
ISO 4548-2:1997 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 2: Element by-pass valve characteristics |
ISO 23181:2007 | Hydraulic fluid power — Filter elements — Determination of resistance to flow fatigue using high viscosity fluid |
ISO 10041-2:2010 | Pneumatic fluid power Electro-pneumatic continuous flow control valves Part 2: Test methods to determine main characteristics to include in the supplier's literature |
I.S. EN 81-31:2010 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS |
ISO 14085-5:2015 | Aerospace series Hydraulic filter elements Test methods Part 5: Resistance to flow fatigue |
ISO 4411:2008 | Hydraulic fluid power Valves Determination of pressure differential/flow characteristics |
DIN EN 14817 E : 2006 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - AIR SPRING CONTROL ELEMENTS |
DIN EN 14652 E : 2007 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
ISO 8230-1:2008 | Safety requirements for dry-cleaning machines Part 1: Common safety requirements |
14/30302919 DC : 0 | PD CEN/TR 81-12 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - BASICS AND INTERPRETATIONS - PART 12: USE OF EN 81-20 AND EN 81-50 IN SPECIFIC MARKETS |
BS EN ISO 128-20:2001 | Technical drawings. General principles of presentation Basic conventions for lines |
BS EN 1804-3 : 2006 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS |
ISO 10767-2:1999 | Hydraulic fluid power Determination of pressure ripple levels generated in systems and components Part 2: Simplified method for pumps |
BS EN 12840:2001 | Safety of machine tools. Manually controlled turning machines with or without automatic control |
ISO 8230:1997 | Safety requirements for dry-cleaning machines using perchloroethylene |
ONORM EN 81-20 : 2015 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
BS EN 982 : 1996 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS |
BS EN 15339-2:2007 | Thermal spraying. Safety requirements for thermal spraying equipment Gas control units |
BS EN 81-2 : 1998 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
BS EN 14652 : 2005 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
ISO 11011:2013 | Compressed air — Energy efficiency — Assessment |
ISO 23125:2015 | Machine tools Safety Turning machines |
ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
ISO 5199:2002 | Technical specifications for centrifugal pumps — Class II |
BS EN 983 : 1996 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS |
BS EN 81-20:2014 | Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods Passenger and goods passenger lifts |
BS EN 12415:2001 | Safety of machine tools. Small numerically controlled turning machines and turning centres |
ISO 9905:1994 | Technical specifications for centrifugal pumps — Class I |
BS ISO 10767-2:1999 | Hydraulic fluid power. Determination of pressure ripple levels generated in systems and components Simplified method for pumps |
BS ISO 3724:2007 | Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using particulate contaminant |
EN 14817:2006 | Railway applications - Suspension components - Air spring control elements |
EN 81-3:2000+A1:2008/AC:2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 3: ELECTRIC AND HYDRAULIC SERVICE LIFTS |
EN 14652:2005+A1:2007 | Water conditioning equipment inside buildings - Membrane separation devices - Requirements for performance, safety and testing |
EN 81-31:2010 | Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts |
EN ISO 9905:1997/A1:2011 | Technical specifications for centrifugal pumps - Class I - Amendment 1 (ISO 9905:1994/AMD 1:2011) |
EN 81-2 : 1998 + A3 2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
EN ISO 10472-1:2008 | Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997) |
EN ISO 5199 : 2002 | TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 2 |
EN ISO 128-20:2001 | Technical drawings - General principles of presentation - Part 20: Basic conventions for lines (ISO 128-20:1996) |
EN ISO 4414:2010 | Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) |
EN ISO 8230 : 1997 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE |
EN ISO 11011:2015 | Compressed air - Energy efficiency - Assessment (ISO 11011:2013) |
EN ISO 4413:2010 | Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
BS ISO 5781:2000 | Hydraulic fluid power. Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves. Mounting surfaces |
15/30321906 DC : 0 | BS ISO 11943 - HYDRAULIC FLUID POWER - ON-LINE AUTOMATIC PARTICLE-COUNTING SYSTEMS FOR LIQUIDS - METHODS OF CALIBRATION AND VALIDATION |
BS ISO 6953-3:2013 | Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Alternative test methods for measuring the flow-rate characteristics of pressure regulators |
15/30316149 DC : 0 | BS ISO 13357-2 - PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 2: PROCEDURE FOR DRY OIL |
BS ISO 4548-14:2016 | Methods of test for full-flow lubricating oil filters for internal combustion engines Cold start simulation and hydraulic pulse durability for composite filter housings |
05/30125044 DC : DRAFT JAN 2005 | ISO 19973-2 - PNEUMATIC FLUID POWER - DETERMINATION OF RELIABILITY BY TESTING - PART 2: VALVES |
BS ISO 4411:2008 | Hydraulic fluid power. Valves. Determination of pressure differential/flow characteristics |
BS ISO 18237:2017 | Hydraulic fluid power. Method for evaluating water separation performance of dehydrators |
ISO 12238:2001 | Pneumatic fluid power — Directional control valves — Measurement of shifting time |
NFPA T3.5.14 : 2009 : R2014 | HYDRAULIC FLUID POWER - DIRECTIONAL CONTROL VALVE - METHOD FOR DETERMINING THE METERING CHARACTERISTICS |
I.S. EN ISO 8230:1998 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE |
BS ISO 14617-1:2002 | Graphical symbols for diagrams General information and indexes |
MIL-STD-40051-1 Revision C:2015 | PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR INTERACTIVE ELECTRONIC TECHNICAL MANUALS (IETMS) |
BS ISO 17567:2005 | Agriculture and forestry tractors and implements. Hydraulic power beyond |
BS ISO 4548-12:2017 | Methods of test for full-flow lubricating oil filters for internal combustion engines Filtration efficiency using particle counting and contaminant retention capacity |
BIS IS 11509-1 : 2012 | METHODS OF TEST FOR FULL-FLOW LUBRICATING OIL FILTERS FOR INTERNAL COMBUSTION ENGINES - PART 1: DIFFERENTIAL PRESSURE/FLOW CHARACTERISTICS |
06/30128779 DC : DRAFT AUG 2006 | ISO 8426 - HYDRAULIC FLUID POWER. POSITIVE DISPLACEMENT PUMPS AND MOTORS - DETERMINATION OF DERIVED CAPACITY |
ISO 14084-2:2015 | Process diagrams for power plants Part 2: Graphical symbols |
BS ISO 12500-2:2007 | Filters for compressed air. Test methods Oil vapours |
05/30111949 DC : DRAFT JUL 2005 | ISO 4409 - HYDRAULIC FLUID POWER - POSITIVE DISPLACEMENT PUMPS, MOTORS AND INTEGRAL TRANSMISSIONS - METHODS OF TESTING AND PRESENTING BASIC STEADY STATE PERFORMANCE |
BS ISO 11943:1999 | Hydraulic fluid power. On-line automatic particle-counting systems for liquids. Methods of calibration and validation |
16/30268528 DC : 0 | BS ISO 18237 - HYDRAULIC FLUID POWER - METHOD FOR EVALUATING WATER SEPARATION PERFORMANCE OF DEHYDRATORS |
BS EN ISO 4413:2010 | Hydraulic fluid power. General rules and safety requirements for systems and their components |
BS ISO 4414:1998 | Pneumatic fluid power. General rules relating to systems |
DIN ISO 13357-2:2008-09 | PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 2: PROCEDURE FOR DRY OILS |
BS ISO 19973-5:2015 | Pneumatic fluid power. Assessment of component reliability by testing Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves |
98/717481 DC : DRAFT DEC 1998 | ISO/CD 16009 - HYDRAULIC FLUID POWER - FILTER - METHOD FOR DETERMINING FILTRATION PERFORMANCE OF AN OFF-LINE ELEMENT |
BIS IS 13534 : 2013 | HYDRAULIC FLUID POWER - VALVES - DETERMINATION OF PRESSURE DIFFERENTIAL/FLOW CHARACTERISTICS |
ISO 6953-3:2012 | Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 3: Alternative test methods for measuring the flow-rate characteristics of pressure regulators |
ISO 15086-2:2000 | Hydraulic fluid power — Determination of the fluid-borne noise characteristics of components and systems — Part 2: Measurement of the speed of sound in a fluid in a pipe |
BS ISO 5599-1:2001 | Pneumatic fluid power. Five-port directional control valves Mounting interface surfaces without electrical connector |
DD ISO/TS 23556:2007 | Performance test method for diesel engine soot-removal devices in lubricating oils. Initial filtration efficiency |
08/30176290 DC : DRAFT JAN 2008 | BS ISO 6358-4 - PNEUMATIC FLUID POWER - DETERMINATION OF FLOW-RATE CHARACTERISTICS OF COMPONENTS USING COMPRESSIBLE FLUIDS - PART 4: CHARGE TEST AS AN ALTERNATE TEST METHOD |
BS ISO 23181:2007 | Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using high viscosity fluid |
ISO 8643:2017 | Earth-moving machinery — Hydraulic excavator and backhoe loader lowering control device — Requirements and tests |
ISO 14085-2:2015 | Aerospace series Hydraulic filter elements Test methods Part 2: Conditioning |
06/30128759 DC : 0 | BS ISO 15086-3 - HYDRAULIC FLUID POWER - DETERMINATION OF THE FLUID-BORNE NOISE CHARACTERISTICS OF COMPONENTS AND SYSTEMS - PART 3: MEASUREMENT OF HYDRAULIC IMPEDANCE |
08/30171024 DC : DRAFT MAY 2008 | BS ISO 10770-1 - HYDRAULIC FLUID POWER - ELECTRICALLY MODULATED HYDRAULIC CONTROL VALVES - PART 1: TEST METHODS FOR FOUR-WAY DIRECTIONAL FLOW CONTROL VALVES |
04/30115437 DC : 0 | ISO 5598 - FLUID POWER SYSTEMS AND COMPONENTS - VOCABULARY |
DIN ISO 20401:2007-07 | Pneumatic fluid power systems - Directional control valves - Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm (ISO 20401:2005 + Cor. 1:2005) |
NF EN ISO 4413 : 2011 | HYDRAULIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS |
ISO 14085-3:2015 | Aerospace series Hydraulic filter elements Test methods Part 3: Filtration efficiency and retention capacity |
ISO 12500-4:2009 | Filters for compressed air Methods of test Part 4: Water |
I.S. EN 81-20:2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
ISO 17567:2005 | Agricultural and forestry tractors and implements Hydraulic power beyond |
ISO 16332:2018 | Diesel engines — Fuel filters — Method for evaluating fuel/water separation efficiency |
NFPA T3.5.14 : 2009 | HYDRAULIC FLUID POWER - DIRECTIONAL CONTROL VALVE - METHOD FOR DETERMINING THE METERING CHARACTERISTICS |
ISO 4548-15:2014 | Methods of test for full-flow lubricating oil filters for internal combustion engines Part 15: Vibration fatigue test for composite filter housings |
ISO 5599-1:2001 | Pneumatic fluid power — Five-port directional control valves — Part 1: Mounting interface surfaces without electrical connector |
I.S. EN ISO 23125:2015 | MACHINE TOOLS - SAFETY - TURNING MACHINES (ISO 23125:2015) |
ISO 5782-1:2017 | Pneumatic fluid power — Compressed air filters — Part 1: Main characteristics to be included in supplier's literature and product-marking requirements |
ISO 18413:2015 | Hydraulic fluid power Cleanliness of components Inspection document and principles related to contaminant extraction and analysis, and data reporting |
ISO 10094-2:2010 | Pneumatic fluid power Electro-pneumatic pressure control valves Part 2: Test methods to determine main characteristics to include in the supplier's literature |
ISO 8573-6:2003 | Compressed air — Part 6: Test methods for gaseous contaminant content |
ISO 14085-4:2015 | Aerospace series Hydraulic filter elements Test methods Part 4: Verification of collapse/burst pressure rating |
DIN EN ISO 128-20 E : 2002 | TECHNICAL DRAWINGS - GENERAL PRINCIPLES OF PRESENTATION - PART 20: BASIC CONVENTIONS FOR LINES |
DIN EN 81-3:2011-06 | Safety rules for the construction und installation of lifts - Part 3: Electric and hydraulic service lifts (includes Amendment A1:2008 + Corrigendum AC:2009) |
ISO 17082:2004 | Pneumatic fluid power — Valves — Data to be included in supplier literature |
ISO 128-20:1996 | Technical drawings General principles of presentation Part 20: Basic conventions for lines |
BS EN 81-3 : 2003 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 3: ELECTRIC AND HYDRAULIC SERVICE LIFTS |
PD ISO/TR 18569:2004 | Safety of machinery. Guidelines for the understanding and use of safety of machinery standards. |
BS EN ISO 5199:2002 | Technical specifications for centrifugal pumps. Class II |
ISO 3724:2007 | Hydraulic fluid power — Filter elements — Determination of resistance to flow fatigue using particulate contaminant |
DIN EN 14817:2006-08 | Railway applications - Suspension components - Air spring control elements |
EN 12415:2000/A1:2002 | SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
DIN EN 14652:2007-09 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
DIN EN ISO 5199:2003-12 | TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 2 |
EN 12840 : 2001 | SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
DIN EN 983:1996-09 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS |
DIN EN 81-20:2014-11 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
DIN EN 983:2009-06 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS |
DIN EN 81-2:2010-08 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
UNE-EN 1804-3:2007 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems |
ISO 3511-3:1984 | Process measurement control functions and instrumentation — Symbolic representation — Part 3: Detailed symbols for instrument interconnection diagrams |
ISO 9461:1992 | Hydraulic fluid power — Identification of valve ports, subplates, control devices and solenoids |
ISO 5598:2008 | Fluid power systems and components Vocabulary |
ISO 3098-5:1997 | Technical product documentation Lettering Part 5: CAD lettering of the Latin alphabet, numerals and marks |
ISO 1219-2:2012 | Fluid power systems and components — Graphical symbols and circuit diagrams — Part 2: Circuit diagrams |
ISO 81714-1:2010 | Design of graphical symbols for use in the technical documentation of products Part 1: Basic rules |
ISO 11727:1999 | Pneumatic fluid power Identification of ports and control mechanisms of control valves and other components |
ISO 3511-2:1984 | Process measurement control functions and instrumentation — Symbolic representation — Part 2: Extension of basic requirements |
IEC 81714-2:2006 | Design of graphical symbols for use in the technical documentation of products - Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.