ISO 14912:2003
Current
Current
The latest, up-to-date edition.
Gas analysis — Conversion of gas mixture composition data
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
03-03-2003
ISO 14912:2003 defines the following quantities commonly used to express the composition of gas mixtures: mole fraction, mass fraction and volume fraction, as well as mole concentration, mass concentration and volume concentration.
Relating to these quantities of composition, ISO 14912:2003 provides methods for the conversion between different quantities and the conversion between different state conditions. Conversion between different quantities means calculating the numerical value of an analyte content in terms of one of the quantities listed above from the numerical value of the same analyte content, at the same pressure and temperature of the gas mixture, given in terms of another of these quantities. Conversion between different state conditions means calculating the numerical value of an analyte content, in terms of one of the quantities listed above, under one set of state conditions from the numerical value of the same quantity under another set of state conditions, i.e. pressure and temperature, of the gas mixture. Gas mixture composition can be converted simultaneously between different quantities of composition and different state conditions by combination of the two types of conversion.
ISO 14912:2003 is only applicable to homogeneous and stable gas mixtures. Therefore any state conditions (pressure and temperature) considered need to be well outside from the condensation region of the gas mixture and that of each of the specified analytes.
| DevelopmentNote |
Supersedes ISO/DIS 14912. (03/2003)
|
| DocumentType |
Standard
|
| Pages |
58
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN ISO 14912:2007 | Identical |
| NF EN ISO 14912 : 2006 | Identical |
| NBN EN ISO 14912 : 2006 COR 2007 | Identical |
| NEN ISO 14912 : 2003 C1 2006 | Identical |
| NEN EN ISO 14912 : 2006 C1 2007 | Identical |
| NS EN ISO 14912 : 2006 AC 2007 | Identical |
| I.S. EN ISO 14912:2007 | Identical |
| PN EN ISO 14912 : 2008 AC 2008 | Identical |
| SN EN ISO 14912 : 2006 CORR 2008 | Identical |
| UNI EN ISO 14912 : 2007 | Identical |
| BIS IS 16252 : 2014 | Identical |
| BS ISO 14912 : 2003 | Identical |
| BS EN ISO 14912:2006 | Identical |
| EN ISO 14912:2006/AC:2007 | Identical |
| DIN EN ISO 14912:2006-11 | Identical |
| I.S. EN ISO 6142-1:2015 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - PART 1: GRAVIMETRIC METHOD FOR CLASS 1 MIXTURES (ISO 6142-1:2015) |
| DD ISO/TS 29041:2008 | Gas mixtures. Gravimetric preparation. Mastering correlations in composition |
| 13/30214514 DC : 0 | BS ISO 6145-2 - GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC METHODS - PART 2: VOLUMETRIC PUMPS |
| 16/30266428 DC : DRAFT MAR 2016 | BS EN ISO 6145-6 - GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC METHODS - PART 6: CRITICAL FLOW ORIFICES |
| BS EN ISO 6145-6:2017 | Gas analysis. Preparation of calibration gas mixtures using dynamic methods Critical flow orifices |
| BS EN ISO 6142-1:2015 | Gas analysis. Preparation of calibration gas mixtures Gravimetric method for Class I mixtures |
| BS ISO 6145-2:2014 | Gas analysis. Preparation of calibration gas mixtures using dynamic methods Piston pumps |
| UNE-ISO 7504:2016 | Gas analysis. Vocabulary |
| DIN EN ISO 6142-1 E : 2015 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - PART 1: GRAVIMETRIC METHOD FOR CLASS I MIXTURES (ISO 61421:2015) |
| UNE-EN ISO 6976:2017 | Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016) |
| BS EN ISO 6976:2005 | Natural gas. Calculation of calorific values, density, relative density and Wobbe index from composition |
| I.S. EN 838:2010 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING DIFFUSIVE SAMPLERS - REQUIREMENTS AND TEST METHODS |
| EN 1076:2009 | Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods |
| EN 12021:2014 | Respiratory equipment - Compressed gases for breathing apparatus |
| DIN EN 16726 E : 2016 | GAS INFRASTRUCTURE - QUALITY OF GAS - GROUP H |
| 14/30250844 DC : 0 | BS EN ISO 6142-1 - GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - PART 1: GRAVIMETRIC METHOD FOR CLASS 1 MIXTURES |
| DIN EN ISO 6142-1:2015-12 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - PART 1: GRAVIMETRIC METHOD FOR CLASS I MIXTURES (ISO 6142-1:2015) |
| 08/30163829 DC : DRAFT JAN 2008 | BS EN 1076 - WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING PUMPED SAMPLERS - REQUIREMENTS AND TEST METHODS |
| ISO 7504:2015 | Gas analysis Vocabulary |
| I.S. EN 16726:2015 | GAS INFRASTRUCTURE - QUALITY OF GAS - GROUP H |
| DIN EN 1076:2010-04 | Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods |
| DIN EN 12021:2014-07 | RESPIRATORY EQUIPMENT - COMPRESSED GASES FOR BREATHING APPARATUS |
| I.S. EN 12021:2014 | RESPIRATORY EQUIPMENT - COMPRESSED GASES FOR BREATHING APPARATUS |
| I.S. EN ISO 6976:2016 | NATURAL GAS - CALCULATION OF CALORIFIC VALUES, DENSITY, RELATIVE DENSITY AND WOBBE INDICES FROM COMPOSITION (ISO 6976:2016) |
| UNI EN 838 : 2010 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING DIFFUSIVE SAMPLERS - REQUIREMENTS AND TEST METHODS |
| 13/30255474 DC : 0 | BS ISO 7504 - GAS ANALYSIS - VOCABULARY |
| ISO/TS 29041:2008 | Gas mixtures — Gravimetric preparation — Mastering correlations in composition |
| I.S. EN ISO 6145-6:2017 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC METHODS - PART 6: CRITICAL FLOW ORIFICES (ISO 6145-6:2017) |
| DIN EN 16726:2016-04 | GAS INFRASTRUCTURE - QUALITY OF GAS - GROUP H |
| BS EN 1076:2009 | Workplace exposure. Procedures for measuring gases and vapours using pumped samplers. Requirements and test methods |
| UNE-EN ISO 6142-1:2016 | Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures (ISO 6142-1:2015) |
| UNI EN 1076 : 2010 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING PUMPED SAMPLERS - REQUIREMENTS AND TEST METHODS |
| UNI EN 12021 : 2014 | RESPIRATORY EQUIPMENT - COMPRESSED GASES FOR BREATHING APPARATUS |
| 17/30345272 DC : 0 | BS ISO 14167 - GAS ANALYSIS - GENERAL QUALITY ASPECTS AND METROLOGICAL TRACEABILITY OF CALIBRATION GAS MIXTURES |
| OIML R 99-1 & 2 : 2008 | INSTRUMENTS FOR MEASURING VEHICLE EXHAUST EMISSIONS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS |
| ISO 19229:2015 | Gas analysis Purity analysis and the treatment of purity data |
| BS ISO 20765-2 : 2015 | NATURAL GAS - CALCULATION OF THERMODYNAMIC PROPERTIES - PART 2: SINGLE-PHASE PROPERTIES (GAS, LIQUID, AND DENSE FLUID) FOR EXTENDED RANGES OF APPLICATION |
| ISO 6145-2:2014 | Gas analysis Preparation of calibration gas mixtures using dynamic methods Part 2: Piston pumps |
| BS ISO 19229:2015 | Gas analysis. Purity analysis and the treatment of purity data |
| DIN EN 838:2010-05 | Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods |
| ISO 6142-1:2015 | Gas analysis Preparation of calibration gas mixtures Part 1: Gravimetric method for Class I mixtures |
| ISO 6976:2016 | Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition |
| BS EN 12021:2014 | Respiratory equipment. Compressed gases for breathing apparatus |
| BS EN 838:2010 | Workplace exposure. Procedures for measuring gases and vapours using diffusive samplers. Requirements and test methods |
| ISO 6145-6:2017 | Gas analysis — Preparation of calibration gas mixtures using dynamic methods — Part 6: Critical flow orifices |
| I.S. EN 1076:2009 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING PUMPED SAMPLERS - REQUIREMENTS AND TEST METHODS |
| EN ISO 6976:2016 | Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016) |
| EN ISO 6142-1:2015 | Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures (ISO 6142-1:2015) |
| EN 16726:2015 | Gas infrastructure - Quality of gas - Group H |
| EN ISO 6145-6:2017 | Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017) |
| EN 838:2010 | Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods |
| 12/30272264 DC : 0 | BS ISO 20765-2 - NATURAL GAS - CALCULATION OF THERMODYNAMIC PROPERTIES - PART 2: SINGLE-PHASE PROPERTIES (GAS, LIQUID, AND DENSE FLUID) FOR EXTENDED RANGES OF APPLICATION |
| BS EN 16726 : 2015 | GAS INFRASTRUCTURE - QUALITY OF GAS - GROUP H |
| 14/30295048 DC : 0 | BS ISO 19229 - GAS ANALYSIS - PURITY ANALYSIS AND THE TREATMENT OF PURITY DATA |
| 15/30289053 DC : 0 | BS ISO 6976 - NATURAL GAS - CALCULATION OF CALORIFIC VALUES, DENSITY, RELATIVE DENSITY AND WOBBE INDEX FROM COMPOSITION |
| UNE-EN 16726:2016 | Gas infrastructure - Quality of gas - Group H |
| BS ISO 7504:2015 | Gas analysis. Vocabulary |
| ISO 20765-2:2015 | Natural gas Calculation of thermodynamic properties Part 2: Single-phase properties (gas, liquid, and dense fluid) for extended ranges of application |
| UNE-EN 12021:2014 | Respiratory equipment - Compressed gases for breathing apparatus |
| DIN EN 12021:1999-01 | RESPIRATORY EQUIPMENT - COMPRESSED GASES FOR BREATHING APPARATUS |
| ISO 6976:2016 | Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition |
| ISO/IEC Guide 98:1993 | Guide to the expression of uncertainty in measurement (GUM) |
| ISO 12213-3:2006 | Natural gas Calculation of compression factor Part 3: Calculation using physical properties |
| DIN 51896-2:1994-09 | GAS ANALYSIS; QUANTITIES OF COMPOSITION, COMPRESSIBILITY FACTOR - PART 2: APPLICATION |
| DIN 1871:1999-05 | Gaseous fuels and other gases - Density and other volumetric quantities |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO 12213-1:2006 | Natural gas Calculation of compression factor Part 1: Introduction and guidelines |
| ISO 7504:2015 | Gas analysis Vocabulary |
| DIN 51896-1:1991-10 | GAS ANALYSIS; QUANTITIES OF COMPOSITIONS, COMPRESSIBILITY FACTOR, BASIS |
| ISO 12213-2:2006 | Natural gas Calculation of compression factor Part 2: Calculation using molar-composition analysis |
£178.00
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.