ISO 15876-1:2017
Current
Current
The latest, up-to-date edition.
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 1: General
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
French, English
Published date
10-01-2017
ISO 15876-1:2017 specifies the general aspects of polybutene-1 (PB-1) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water whether or not intended for human consumption (domestic systems) and for heating systems, under design pressures and temperatures according to the class of application (see Table 1).
The designation polybutene is used together with the abbreviation PB throughout this document.
ISO 15876-1:2017 covers a range of service conditions (application classes) and design pressure and pipe dimension classes. Values of TD, Tmax and Tmal in excess of those in Table 1 do not apply.
NOTE It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes.
It also specifies the test parameters for the test methods referred to in this document.
In conjunction with the other parts of ISO 15876, this document is applicable to PB pipes, fittings, their joints and to joints with components of other plastics and non-plastics materials intended to be used for hot and cold water installations.
| DevelopmentNote |
Supersedes ISO/DIS 15876-1.2 (12/2003) Supersedes ISO/DIS 15876-1. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN ISO 15876-1:2015-08 (Draft) | Identical |
| SS-EN ISO 15876-1:2017 | Identical |
| NF EN ISO 15876-1 : 2017 | Identical |
| BS EN ISO 15876-1:2017 | Identical |
| I.S. EN ISO 15876-1:2017 | Identical |
| UNI EN ISO 15876-1:2017 | Identical |
| NEN EN ISO 15876-1 : 2017 | Identical |
| UNI EN ISO 15876-1 : 2008 | Identical |
| ONORM EN ISO 15876-1 : 2018 | Identical |
| UNE-EN ISO 15876-1:2017 | Identical |
| EN ISO 15876-1:2017 | Identical |
| DIN EN ISO 15876-1:2017-06 | Identical |
| SN EN ISO 15876-1 : 2017 | Identical |
| PN EN ISO 15876-1 : 2017 | Identical |
| NS EN ISO 15876-1 : 2017 | Identical |
| ÖNORM EN ISO 15876-1:2021 11 01 | Identical |
| SANS 15876-1:2005(R2017) | Identical |
| SANS 15876-1 : 1ED 2005(R2010) | Identical |
| ISO 15876-2:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes |
| UNI EN ISO 21003-1 : 2009 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL |
| ISO 18566-1:2017 | Building environment design — Design, test methods and control of hydronic radiant heating and cooling panel systems — Part 1: Vocabulary, symbols, technical specifications and requirements |
| 15/30324138 DC : 0 | BS EN ISO 15876-3 - PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTYLENE (PB) - PART 3: FITTINGS |
| 11/30197617 DC : 0 | BS ISO 11855-5 - BUILDING ENVIRONMENT DESIGN - STANDARDS FOR THE DESIGN, CONSTRUCTION AND OPERATION OF RADIANT HEATING AND COOLING SYSTEMS - PART 5: INSTALLATION |
| 07/30160794 DC : 0 | BS EN 15632-2 - DISTRICT HEATING PIPES - PRE-INSULATED FLEXIBLE PIPE SYSTEMS - PART 2: BONDED PLASTIC SERVICE PIPES - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 15876-2:2017 | Plastics piping systems for hot and cold water installations. Polybutene (PB) Pipes |
| 05/30132152 DC : DRAFT APR 2005 | ISO 21004 - PLASTICS PIPING SYSTEMS - MULTILAYER PIPES AND THEIR JOINTS, BASED ON THERMOPLASTICS, FOR WATER SUPPLY |
| I.S. EN 15632-3:2010 | DISTRICT HEATING PIPES - PRE-INSULATED FLEXIBLE PIPE SYSTEMS - PART 3: NON BONDED SYSTEM WITH PLASTIC SERVICE PIPES; REQUIREMENTS AND TEST METHODS |
| EN ISO 15876-3:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017) |
| I.S. EN ISO 15876-5:2017 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTENE (PB) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM (ISO 15876-5:2017) |
| 07/30160797 DC : 0 | BS EN 15632-3 - DISTRICT HEATING PIPES - PRE-INSULATED FLEXIBLE PIPE SYSTEMS - PART 3: NON BONDED PLASTIC SERVICE PIPES - REQUIREMENTS AND TEST METHODS |
| DD ISO/TS 26873:2010 | Plastics pipes and fittings. Definition and construction procedures for reference lines |
| BS EN ISO 15876-3:2017 | Plastics piping systems for hot and cold water installations. Polybutene (PB) Fittings |
| 15/30324142 DC : 0 | BS EN ISO 15876-5 - PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTYLENE (PB) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM |
| BS EN ISO 15876-5:2017 | Plastics piping systems for hot and cold water installations. Polybutene (PB) Fitness for purpose of the system |
| ONORM EN 1264-4 : 2009 | WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION |
| I.S. EN ISO 15876-3:2017 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTENE (PB) - PART 3: FITTINGS (ISO 15876-3:2017) |
| BS EN 15632-3 : 2010 | DISTRICT HEATING PIPES - PRE-INSULATED FLEXIBLE PIPE SYSTEMS - PART 3: NON BONDED SYSTEM WITH PLASTIC SERVICE PIPES; REQUIREMENTS AND TEST METHODS |
| DIN EN 14868:2005-11 | PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN CLOSED WATER CIRCULATION SYSTEMS |
| DIN EN 14868 E : 2005 | PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN CLOSED WATER CIRCULATION SYSTEMS |
| 16/30310170 DC : DRAFT MAR 2016 | BS ISO 18566-1 - BUILDING ENVIRONMENT DESIGN - DESIGN, TEST METHODS AND CONTROL OF HYDRONIC RADIANT HEATING AND COOLING PANEL SYSTEMS - PART 1: DEFINITION, SYMBOLS, TECHNICAL SPECIFICATIONS AND REQUIREMENTS |
| I.S. EN 1264-4:2009 | WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION |
| ONORM EN ISO 21003-1 : 2012 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL (ISO 21003-1:2008) |
| 15/30324134 DC : 0 | BS EN ISO 15876-2 - PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTENE (PB) - PART 2: PIPES |
| 07/19990369 DC : 0 | BS EN 806-4 - SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4 - INSTALLATION |
| BS EN ISO 21003-1:2008 | Multilayer piping systems for hot and cold water installations inside buildings General |
| BS EN 15632-2 : 2010 | DISTRICT HEATING PIPES - PRE-INSULATED FLEXIBLE PIPE SYSTEMS - PART 2: BONDED PLASTIC SERVICE PIPES - REQUIREMENTS AND TEST METHODS |
| UNE 53943:2017 | Plastic networks to centralize water meters. Polyethylene (PE), polypropylene (PP) and polybutylene (PB) networks with butt welded joints |
| EN 1264-4:2009 | Water based surface embedded heating and cooling systems - Part 4: Installation |
| ISO/TS 26873:2010 | Plastics pipes and fittings — Definition and construction procedures for reference lines |
| I.S. EN 15632-2:2010 | DISTRICT HEATING PIPES - PRE-INSULATED FLEXIBLE PIPE SYSTEMS - PART 2: BONDED PLASTIC SERVICE PIPES - REQUIREMENTS AND TEST METHODS |
| DIN EN 1264-4:2009-11 | Water based surface embedded heating and cooling systems - Part 4: Installation |
| ISO 21003-1:2008 | Multilayer piping systems for hot and cold water installations inside buildings — Part 1: General |
| BS EN 1264-4:2009 | Water based surface embedded heating and cooling systems Installation |
| ONORM EN 15632-2 : 2015 | DISTRICT HEATING PIPES - PRE-INSULATED FLEXIBLE PIPE SYSTEMS - PART 2: BONDED PLASTIC SERVICE PIPES - REQUIREMENTS AND TEST METHODS |
| ONORM EN 15632-3 : 2015 | DISTRICT HEATING PIPES - PRE-INSULATED FLEXIBLE PIPE SYSTEMS - PART 3: NON BONDED SYSTEM WITH PLASTIC SERVICE PIPES - REQUIREMENTS AND TEST METHODS |
| UNI EN 15015 : 2008 | PLASTICS PIPING SYSTEMS - SYSTEMS FOR HOT AND COLD WATER NOT INTENDED FOR HUMAN CONSUMPTION - PERFORMANCE CHARACTERISTICS FOR PIPES, FITTINGS AND THEIR JOINTS |
| DIN EN ISO 21003-1:2008-11 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL |
| BS ISO 18566-1:2017 | Building environment design. Design, test methods and control of hydronic radiant heating and cooling panel systems Vocabulary, symbols, technical specifications and requirements |
| UNI EN 1264-4 : 2009 | WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION |
| DIN EN 15632-2:2015-03 | District heating pipes - Pre-insulated flexible pipe systems - Part 2: Bonded plastic service pipes - Requirements and test methods (includes Amendment A1:2014) |
| ISO 15876-3:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings |
| BS EN 14868:2005 | Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in closed water circulation systems |
| UNE-EN ISO 15876-2:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017) |
| UNE-EN 1264-4:2010 | Water based surface embedded heating and cooling systems - Part 4: Installation |
| UNE-EN ISO 15876-5:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2017) |
| BS EN 806-2:2005 | Specifications for installations inside buildings conveying water for human consumption Design |
| EN 14868 : 2005 | PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN CLOSED WATER CIRCULATION SYSTEMS |
| EN 806-2:2005 | Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
| EN ISO 21003-1:2008 | Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General (ISO 21003-1:2008) |
| EN 15632-2:2010+A1:2014 (edition 2) | District heating pipes - Pre-insulated flexible pipe systems - Part 2: Bonded plastic service pipes - Requirements and test methods |
| EN 15632-3:2010+A1:2014 (edition 2) | District heating pipes - Pre-insulated flexible pipe systems - Part 3: Non bonded system with plastic service pipes; requirements and test methods |
| ISO 21004:2006 | Plastics piping systems Multilayer pipes and their joints, based on thermoplastics, for water supply |
| DIN EN 15632-3:2015-03 | District heating pipes - Pre-insulated flexible pipe systems - Part 3: Non bonded system with plastic service pipes - Requirements and test methods (includes Amendment A1:2014) |
| I.S. EN ISO 15876-2:2017 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTENE (PB) - PART 2: PIPES (ISO 15876-2:2017) |
| ISO 15876-5:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 5: Fitness for purpose of the system |
| 07/30168416 DC : 0 | BS EN 1264-4 - WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION |
| UNI EN 806-2 : 2008 | SPECIFICATION FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 2: DESIGN |
| I.S. EN ISO 21003-1:2008 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL |
| EN ISO 15876-5:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2017) |
| EN ISO 15876-2:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017) |
| DIN EN 806-2:2005-06 | Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
| UNE-EN ISO 15876-3:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017) |
| EN 806-1:2000/A1:2001 | SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 1: GENERAL |
| ISO 15876-3:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings |
| ISO 472:2013 | Plastics Vocabulary |
| CEN/TR 12108:2012 | Plastics piping systems - Guidance for the installation inside buildings of pressure piping systems for hot and cold water intended for human consumption |
| ISO 10508:2006 | Plastics piping systems for hot and cold water installations Guidance for classification and design |
| ISO 15876-2:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes |
| ISO 4065:1996 | Thermoplastics pipes Universal wall thickness table |
| ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
| ISO 15876-5:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 5: Fitness for purpose of the system |
£58.00
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.