|
ISO 9229:2007
|
Thermal insulation Vocabulary
|
|
EN 14706:2012
|
Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature
|
|
EN 12085:2013
|
Thermal insulating products for building applications - Determination of linear dimensions of test specimens
|
|
EN 13468:2001
|
Thermal insulating products for building equipment and industrial installations - Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH
|
|
EN 1607:2013
|
Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces
|
|
EN 13820:2003
|
Thermal insulating materials for building applications - Determination of organic content
|
|
EN 1606:2013
|
Thermal insulating products for building applications - Determination of compressive creep
|
|
ISO 7884-1:1987
|
Glass Viscosity and viscometric fixed points Part 1: Principles for determining viscosity and viscometric fixed points
|
|
EN 1608:2013
|
Thermal insulating products for building applications - Determination of tensile strength parallel to faces
|
|
EN 13471:2001
|
Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion
|
|
ISO 7884-7:1987
|
Glass Viscosity and viscometric fixed points Part 7: Determination of annealing point and strain point by beam bending
|
|
ISO 29768:2008
|
Thermal insulating products for building applications — Determination of linear dimensions of test specimens
|
|
EN 13469:2012
|
Thermal insulating products for building equipment and industrial installations - Determination of water vapour transmission properties of preformed pipe insulation
|
|
EN 1605:2013
|
Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions
|
|
EN 824:2013
|
Thermal insulating products for building applications - Determination of squareness
|
|
ISO 16544:2012
|
Thermal insulating products for building applications — Conditioning to moisture equilibrium under specified temperature and humidity conditions
|
|
EN 12088:2013
|
Thermal insulating products for building applications - Determination of long term water absorption by diffusion
|
|
EN 825:2013
|
Thermal insulating products for building applications - Determination of flatness
|
|
EN 823:2013
|
Thermal insulating products for building applications - Determination of thickness
|
|
EN 13494:2002
|
Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material
|
|
EN 12431:2013
|
Thermal insulating products for building applications - Determination of thickness for floating floor insulating products
|
|
EN 13470:2001
|
Thermal insulating products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation
|
|
EN 1602:2013
|
Thermal insulating products for building applications - Determination of the apparent density
|
|
EN 12087:2013
|
Thermal insulating products for building applications - Determination of long term water absorption by immersion
|
|
EN 13793:2003
|
Thermal insulating products for building applications - Determination of behaviour under cyclic loading
|
|
EN 12090:2013
|
Thermal insulating products for building applications - Determination of shear behaviour
|
|
EN 13472:2012
|
Thermal insulating products for building equipment and industrial installations - Determination of short term water absorption by partial immersion of preformed pipe insulation
|
|
EN 1603:2013
|
Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 °C/ 50 % relative humidity)
|
|
EN 1604:2013
|
Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
|
|
EN 14707:2012
|
Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature for preformed pipe insulation
|
|
EN 12091:2013
|
Thermal insulating products for building applications - Determination of freeze-thaw resistance
|
|
EN 12089:2013
|
Thermal insulating products for building applications - Determination of bending behaviour
|
|
ISO 5725-2:1994
|
Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
|
|
EN 13495:2002
|
Thermal insulation products for building applications - Determination of the pull-off resistance of external thermal insulation composite systems (ETICS)(foam block test)
|
|
EN 12429:1998
|
Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions
|
|
EN 12430:2013
|
Thermal insulating products for building applications - Determination of behaviour under point load
|
|
ISO 29466:2008
|
Thermal insulating products for building applications — Determination of thickness
|
|
EN 1609:2013
|
Thermal insulating products for building applications - Determination of short term water absorption by partial immersion
|
|
EN 826:2013
|
Thermal insulating products for building applications - Determination of compression behaviour
|
|
EN 13496:2013
|
Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes as reinforcement for External Thermal Insulation Composite Systems with renders (ETICS)
|
|
EN 13497:2002
|
Thermal insulation products for building applications - Determination of the resistance to impact of external thermal insulation composite systems (ETICS)
|
|
EN 14303:2015
|
Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification
|
|
EN 822:2013
|
Thermal insulating products for building applications - Determination of length and width
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.