ISO 1889:2009
Current
Current
The latest, up-to-date edition.
Reinforcement yarns Determination of linear density
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French, Russian
Published date
26-06-2009
ISO 1899:2009 specifies a method for the determination of the linear density of glass-fibre, carbon-fibre, aramid-fibre and any other reinforcement-fibre yarns.
It is applicable to all types of yarn, including single yarns, double and cabled yarns, textured yarns, rovings and staple-fibre yarns.
| DevelopmentNote |
Supersedes ISO 10120 (03/2001) Supersedes ISO/DIS 1889. (06/2009)
|
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| JIS R 3911:2014 | Identical |
| GOST ISO 1889 : 2013 | Identical |
| NF EN ISO 1889 : 2009 | Identical |
| NBN EN ISO 1889 : 2009 | Identical |
| NEN EN ISO 1889 : 2009 | Identical |
| NS EN ISO 1889 : 2009 | Identical |
| I.S. EN ISO 1889:2009 | Identical |
| PN EN ISO 1889 : 2009 | Identical |
| SAC GB/T 7690-1 : 2013 | Identical |
| SN EN ISO 1889:2010 | Identical |
| UNI EN ISO 1889 : 2009 | Identical |
| UNE-EN ISO 1889:2010 | Identical |
| IS 17298 : 2019 | Identical |
| BS EN ISO 1889:2009 | Identical |
| EN ISO 1889:2009 | Identical |
| DIN EN ISO 1889:2009-10 | Identical |
| UNE 43505:1985 | Identical |
| BS ISO 8516:2011 | Textile glass. Textured yarns. Basis for a specification |
| DIN EN 16245-3:2013-08 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE |
| BS EN 16245-3:2013 | Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for fibre |
| DIN EN 15422:2008-06 | Precast concrete products - Specification of glassfibres for reinforcement of mortars and concretes |
| 17/30336191 DC : DRAFT JUL 2017 | BS ISO 11567 - CARBON FIBRE - DETERMINATION OF FILAMENT DIAMETER AND CROSS-SECTIONAL AREA |
| BS EN 15422:2008 | Precast concrete products. Specification of glassfibres for reinforcement of mortars and concretes |
| ASTM C 1666/C1666M : 2008 | Standard Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement |
| PREN 2833-3 : 200P1 | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 3: GLASS FABRIC/EPOXY RESIN PREIMPREGNATE CURING AT UP 180 DEGREES C FOR CONTINUOUS USE UP TO 120 DEGREES C |
| PREN 2833-2 : 200P1 | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 2: GLASS FABRIC/EPOXY RESIN PREIMPREGNATES CURING AT UP 125 DEGREES C FOR CONTINUOUS USE UP TO 80 DEGREES C |
| BS EN ISO 12215-1:2000 | Small craft. Hull construction and scantlings Materials. Thermosetting resins, glass-fibre reinforcement, reference laminate |
| I.S. EN 16245-4:2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 4: SPECIFIC REQUIREMENTS FOR FABRICS |
| UNI EN 16245-3 : 2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE |
| ISO 9163:2005 | Textile glass — Rovings — Manufacture of test specimens and determination of tensile strength of impregnated rovings |
| DIN EN ISO 10618:2004-11 | Carbon fibre - Determination of tensile properties of resin-impregnated yarn (ISO 10618:2004) |
| EN 13121-1:2003 | GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - SPECIFICATION CONDITIONS AND ACCEPTANCE CONDITIONS |
| BS EN 14020-3:2002 | Reinforcements. Specification for textile glass rovings Specific requirements |
| ISO 13002:1998 | Carbon fibre Designation system for filament yarns |
| DIN EN ISO 9163:2005-07 | Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005); German version EN ISO 9163:2005 |
| DIN EN 14649:2005-07 | PRECAST CONCRETE PRODUCTS - TEST METHOD FOR STRENGTH RETENTION OF GLASS FIBRES IN CEMENT AND CONCRETE (SIC TEST) |
| BS ISO 3598:2011 | Textile glass. Yarns. Basis for a specification |
| BS ISO 2797:2017 | Textile glass. Rovings. Basis for a specification |
| 98/123516 DC : DRAFT JULY 1998 | PREN 13121-1 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - ACCEPTANCE CONDITIONS AND USAGE CONDITIONS |
| 10/30211421 DC : 0 | BS ISO 3598 - TEXTILE GLASS - YARNS - BASIS FOR A SPECIFICATION |
| SAE AMS 2980/1 : 2014 | CARBON FIBER FABRIC AND EPOXY RESIN WET LAY-UP REPAIR MATERIAL - PART 1 - GENERAL REQUIREMENTS |
| ISO 3598:2011 | Textile glass Yarns Basis for a specification |
| UNE-EN 16245-3:2014 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre |
| ISO 3341:2000 | Textile glass Yarns Determination of breaking force and breaking elongation |
| ISO 10371:1993 | Reinforcement materials — Braided tapes — Basis for a specification |
| ISO 10122:2014 | Reinforcement materials Tubular braided sleeves Basis for a specification |
| ISO 2797:2017 | Textile glass — Rovings — Basis for a specification |
| I.S. EN 2833-005:2013 | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 005: GLASS FABRIC/PHENOLIC RESIN PREIMPREGNATE |
| I.S. EN 15422:2008 | PRECAST CONCRETE PRODUCTS - SPECIFICATION OF GLASSFIBRES FOR REINFORCEMENT OF MORTARS AND CONCRETES |
| BS EN 14118-2:2003 | Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats) Methods of test and general requirements |
| UNE-EN ISO 1890:2010 | Reinforcement yarns - Determination of twist (ISO 1890:2009) |
| BS EN ISO 10618:2004 | Carbon fibre. Determination of tensile properties of resin-impregnated yarn |
| I.S. EN ISO 10618:2004 | CARBON FIBRE - DETERMINATION OF TENSILE PROPERTIES OF RESINIMPREGNATED YARN |
| I.S. EN ISO 1890:2009 | REINFORCEMENT YARNS - DETERMINATION OF TWIST |
| BS 3691:1990 | Specification for E glass fibre rovings for reinforcement of polyester and epoxy resin systems |
| DIN EN 16245-4:2013-07 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 4: SPECIFIC REQUIREMENTS FOR FABRICS |
| BS ISO 13931:2013 | Carbon fibre. Determination of volume resistivity |
| I.S. EN 1007-2:2002 | ADVANCED TECHNICAL CERAMICS - CERAMICS COMPOSITES - METHODS OF TEST FOR REINFORCEMENT - PART 2: DETERMINATION OF LINEAR DENSITY |
| UNI EN 16245-4 : 2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 4: SPECIFIC REQUIREMENTS FOR FABRICS |
| 11/30239983 DC : DRAFT MAR 2011 | BS EN 16245-4 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 4: SPECIFIC REQUIREMENTS FOR FABRICS |
| BS ISO 10371:1993 | Fibre reinforced plastics. Braided tapes for composite materials reinforcement. Basis for a specification |
| BS ISO 3341:2000 | Textile glass. Yarns. Determination of breaking force and breaking elongation |
| BS ISO 10122:2014 | Reinforcement materials. Tubular braided sleeves. Basis for a specification |
| UNI EN 2833-005 : 2014 | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 005: GLASS FABRIC/PHENOLIC RESIN PREIMPREGNATE |
| ACI 549.3R : 2009 | REPORT ON GLASS FIBER-REINFORCED CONCRETE PREMIX |
| PREN 2833-5 : 200P1 | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 5: GLASS FABRIC/PHENOLIC RESIN PREIMPREGNATE |
| SAE AMS 2980/3 : 2014 | CARBON FIBER FABRIC AND EPOXY RESIN WET LAY-UP REPAIR MATERIAL - PART 3 - PURCHASING SPECIFICATION - FABRIC |
| ISO 12215-1:2000 | Small craft — Hull construction and scantlings — Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate |
| DIN EN ISO 9163 E : 2005 | TEXTILE GLASS - ROVINGS - MANUFACTURE OF TEST SPECIMENS AND DETERMINATION OF TENSILE STRENGTH OF IMPREGNATED ROVINGS |
| DIN EN 14649 E : 2005 | PRECAST CONCRETE PRODUCTS - TEST METHOD FOR STRENGTH RETENTION OF GLASS FIBRES IN CEMENT AND CONCRETE (SIC TEST) |
| DIN EN ISO 1890:2009-10 | REINFORCEMENT YARNS - DETERMINATION OF TWIST |
| BS EN 13121-1:2003 | GRP tanks and vessels for use above ground Raw materials. Specification conditions and acceptance conditions |
| EN ISO 1890:2009 | Reinforcement yarns - Determination of twist (ISO 1890:2009) |
| UNI EN ISO 1890 : 2009 | REINFORCEMENT YARNS - DETERMINATION OF TWIST |
| EN 14020-3:2002 | Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements |
| ISO 3597-1:2003 | Textile-glass-reinforced plastics Determination of mechanical properties on rods made of roving-reinforced resin Part 1: General considerations and preparation of rods |
| 11/30209308 DC : 0 | BS ISO 13931 - CARBON FIBRE - DETERMINATION OF VOLUME RESISTIVITY |
| UNI EN 15422 : 2008 | PRECAST CONCRETE PRODUCTS - SPECIFICATION OF GLASS-FIBRES FOR REINFORCEMENT OF MORTARS AND CONCRETES |
| 95/714421 DC : 0 | PREN 2833-3 - AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 3: GLASS FABRIC/EPOXY RESIN PREIMPREGNATE CURING AT UP TO 180 DEGREE C FOR CONTINUOUS USE UP TO 120 DEGREE C |
| BS ISO 3597-1:2003 | Textile-glass-reinforced plastics. Determination of mechanical properties on rods made of roving-reinforced resin General considerations and preparation of rods |
| BS ISO 9163 : 1996 AMD 10351 | TEXTILE GLASS - ROVINGS - MANUFACTURE OF TEST SPECIMENS AND DETERMINATION OF TENSILE STRENGTH OF IMPREGNATED ROVINGS |
| 11/30239980 DC : DRAFT MAR 2011 | BS EN 16245-3 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE |
| UNE-EN 16245-4:2014 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics |
| NF ISO 8516 : 2011 | TEXTILE GLASS - TEXTURED YARNS - BASIS FOR A SPECIFICATION |
| DIN EN 15422 E : 2008 | PRECAST CONCRETE PRODUCTS - SPECIFICATION OF GLASSFIBRES FOR REINFORCEMENT OF MORTARS AND CONCRETES |
| NF ISO 3598 : 2011 | TEXTILE GLASS - YARNS - BASIS FOR A SPECIFICATION |
| XP PREN 2833-2 : 1995 XP | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 2: GLASS FABRIC/EPOXY RESIN PREIMPREGNATES CURING AT UPTO 125 DEGREES C FOR CONTINUOUS USE UPTO 80 DEGREES C |
| ASTM C 1666/C1666M : 2008 : R2015 | Standard Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement |
| I.S. EN 16245-3:2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE |
| ISO 13931:2013 | Carbon fibre — Determination of volume resistivity |
| ISO 8516:2011 | Textile glass Textured yarns Basis for a specification |
| BS EN 13003-1:1999 | Para-aramid fibre filament yarns Designation |
| BS EN ISO 9163:2005 | Textile glass. Rovings. Manufacture of test specimens and determination of tensile strength of impregnated rovings |
| BS EN 13003-3:1999 | Para-aramid fibre filament yarns Technical specifications |
| BS EN 14649:2005 | Precast concrete products. Test method for strength retention of glass fibres in cement and concrete (SIC test) |
| BS EN 12654-2:1999 | Textile glass. Yarns Methods of test and general specifications |
| BS EN 1007-2:2002 | Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements Determination of linear density |
| BS EN 13003-2:1999 | Para-aramid fibre filament yarns Methods of test and general specifications |
| BS EN 14020-1:2002 | Reinforcements. Specification for textile glass rovings Designation |
| BS EN 14020-2:2002 | Reinforcements. Specification for textile glass rovings Methods of test and general requirements |
| ISO 10618:2004 | Carbon fibre — Determination of tensile properties of resin-impregnated yarn |
| ISO 1890:2009 | Reinforcement yarns Determination of twist |
| EN ISO 10618 : 2004 | CARBON FIBRE - DETERMINATION OF TENSILE PROPERTIES OF RESIN-IMPREGNATED YARN |
| EN 15422:2008 | Precast concrete products - Specification of glassfibres for reinforcement of mortars and concretes |
| EN 14649 : 2005 | PRECAST CONCRETE PRODUCTS - TEST METHOD FOR STRENGTH RETENTION OF GLASS FIBRES IN CEMENT AND CONCRETE (SIC TEST) |
| EN 16245-3:2013 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre |
| EN ISO 9163:2005 | Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005) |
| EN 14020-2:2002 | Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements |
| EN ISO 13002 : 1998 | CARBON FIBRE - DESIGNATION SYSTEM FOR FILAMENT YARNS |
| EN 14020-1:2002 | Reinforcements - Specification for textile glass rovings - Part 1: Designation |
| EN 14118-2:2003 | Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 2: Methods of test and general requirements |
| EN 2833-005:2013 | Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 005: Glass fabric/phenolic resin preimpregnate |
| EN 16245-4:2013 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics |
| BS EN 16245-4:2013 | Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for fabrics |
| ACI 549.3R : 2009 : R2017 | REPORT ON GLASS FIBER-REINFORCED CONCRETE PREMIX |
| BS EN 2833-005:2013 | Aerospace series. Glass fibre thermosetting preimpregnates. Technical specification Glass fabric/phenolic resin preimpregnate |
| 95/714422 DC : 0 | PREN 2833-4 - AEROSPACE SERIES - GLASS FIBER THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 4: UNIDIRECTIONAL GLASS/EPOXY RESIN PREIMPREGNATE CURING AT UP TO 125 DEGREE C FOR CONTINUOUS USE UP TO 80 DEGREE C |
| 03/109038 DC : DRAFT MAY 2003 | ISO 9163 - TEXTILE GLASS - ROVINGS - MANUFACTURE OF TEST SPECIMENS AND DETERMINATION OF TENSILE STRENGTH OF IMPREGNATED ROVINGS |
| PREN 2833-4 : 200P1 | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 4: UNIDIRECTIONAL GLASS/EPOXY RESIN PREIMPREGNATE CURING AT UP TO 125 DEGREES C FOR CONTINUOUS USE UP TO 80 DEGREES C |
| EN ISO 12215-1:2000 | Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000) |
| BS EN 12654-3:1999 | Textile glass. Yarns General requirements for general applications |
| BS EN 13002-2:1999 | Carbon fibre yarns Test methods and general specifications |
| BS EN ISO 13002:1999 | Carbon fibre. Designation system for filament yarns |
| BS EN ISO 1890:1997 | Reinforcement yarns. Determination of twist |
| EN 1007-2:2002 | Advanced technical ceramics - Ceramics composites - Methods of test for reinforcement - Part 2: Determination of linear density |
| EN 12654-2:1998 | Textile glass - Yarns - Part 2: Methods of test and general specifications |
| ISO 10548:2002 | Carbon fibre — Determination of size content |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 1887:2014 | Textile glass Determination of combustible-matter content |
| ISO 3344:1997 | Reinforcement products — Determination of moisture content |
£39.00
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - Russian
PDF - Russian
PDF 3 Users - Russian
PDF 5 Users - Russian
PDF 9 Users - Russian
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - Russian
PDF - Russian
PDF 3 Users - Russian
PDF 5 Users - Russian
PDF 9 Users - Russian
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.