Microturbines applications — Safety

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

13-02-2015

Publisher

International Organization for Standardization

ISO 19372:2015 covers the safety requirements for industrial, commercial, and residential automated stationary microturbine (micro gas turbine) engine generator assemblies with an individual system or subsystem output rating with nominal supply voltages not exceeding 1 000 V for alternating current (A.C.) and not exceeding 1 500 V for direct current (D.C.), 500 kW per individual unit/subsystem or less that are intended for installation and use in ordinary and hazardous location using liquid or gaseous fuels and the safety related control and detection systems and essential auxiliaries for all types of open cycles, closed-cycle, and semi-closed (simple, combined, regenerative, reheat, etc.) used in onshore and offshore applications including floating production platforms.

Committee	ISO/TC 192
DevelopmentNote	Supersedes ISO/DIS 19372. (02/2015)
DocumentType	Standard
Pages	89
ProductNote	THIS STANDARD ALSO REFERS TO EN 14461
PublisherName	International Organization for Standardization
Status	Current

Standards	Relationship
NEN ISO 19372 : 2015	Identical
BS ISO 19372:2015	Identical

IEC 61025:2006	Fault tree analysis (FTA)
AGMA 6023 : A	DESIGN MANUAL FOR ENCLOSED EPICYCLIC GEAR DRIVES
EN 1127-1:2011	Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
ISO 12499:1999	Industrial fans Mechanical safety of fans Guarding
ISO 14691:2008	Petroleum, petrochemical and natural gas industries — Flexible couplings for mechanical power transmission — General-purpose applications
IEC 60079-10:2002	Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
NFPA 2001 : 2015	CLEAN AGENT FIRE EXTINGUISHING SYSTEMS
NFPA 750 : 2015	WATER MIST FIRE PROTECTION SYSTEMS
ISO 9972:2015	Thermal performance of buildings — Determination of air permeability of buildings — Fan pressurization method
IEC 61000-6-4:2006+AMD1:2010 CSV	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
IEC 60068-2-18:2017	Environmental testing - Part 2-18: Tests - Test R and guidance: Water
AGMA 6011 : I	SPECIFICATION FOR HIGH SPEED HELICAL GEAR UNITS
ISO 4871:1996	Acoustics — Declaration and verification of noise emission values of machinery and equipment
ISO 3744:2010	Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
IEC 60730-2-19:1997+AMD1:2000+AMD2:2007 CSV	Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements
ISO 6183:2009	Fire protection equipment Carbon dioxide extinguishing systems for use on premises Design and installation
IEC TR 60079-20:1996	Electrical apparatus for explosive gas atmospheres - Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus
IEC 60034-22:2009	Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets
IEC 60695-1-1:1999	Fire hazard testing - Part 1-1: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
IEC 61511-1:2016+AMD1:2017 CSV	Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements
ISO 14120:2015	Safety of machinery Guards General requirements for the design and construction of fixed and movable guards
IEC 60079-19:2010+AMD1:2015 CSV	Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation
IEC 61000-6-2:2016	Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
IEC 60812:2006	Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
ISO 3977-1:1997	Gas turbines — Procurement — Part 1: General introduction and definitions
IEC 60079-17:2013	Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
ISO 13732-1:2006	Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
ISO 11086:1996	Gas turbines — Vocabulary
ISO 4413:2010	Hydraulic fluid power General rules and safety requirements for systems and their components
NFPA 101 : 2018	LIFE SAFETY CODE
EN 13463-1:2009	Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
EN 13478:2001+A1:2008	Safety of machinery - Fire prevention and protection
IEC 60204-1:2016	Safety of machinery - Electrical equipment of machines - Part 1: General requirements
UL 2200:2ED 2012-06	Standard for Stationary Engine Generator Assemblies
IEC 61508-5:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508)
ISO 3977-9:1999	Gas turbines Procurement Part 9: Reliability, availability, maintainability and safety
ISO 14118:2000	Safety of machinery Prevention of unexpected start-up
ANSI B11 : 2008	GENERAL SAFETY REQUIREMENTS COMMON TO ANSI B11 MACHINES
ISO 14123-1:2015	Safety of machinery Reduction of risks to health resulting from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers
ISO 16010:2005	Elastomeric seals Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
EN 614-1:2006+A1:2009	Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
IEC TR 61000-5-2:1997	Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling
ISO 12100:2010	Safety of machinery — General principles for design — Risk assessment and risk reduction
IEC 60730-2-14:2017	Automatic electrical controls - Part 2-14: Particular requirements for electric actuators
IEC 60364-1:2005	Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions
IEC 62305-1:2010	Protection against lightning - Part 1: General principles
NFPA 15 : 2017	WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION
ISO/TR 13387-7:1999	Fire safety engineering Part 7: Detection, activation and suppression
ISO/IEC Guide 51:2014	Safety aspects Guidelines for their inclusion in standards
NFPA 68 : 2013	EXPLOSION PROTECTION BY DEFLAGRATION VENTING
EN 626-2:1996+A1:2008	Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures
IEC 61511-3:2016	Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
ISO 9772:2012	Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame
EN 953:1997+A1:2009	Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
ISO 13691:2001	Petroleum and natural gas industries — High-speed special-purpose gear units
CEN/TS 14816:2008	Fixed firefighting systems - Water spray systems - Design, installation and maintenance
IEC 60079-29-2:2015 RLV	Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
NFPA 70 : 2017	NATIONAL ELECTRICAL CODE
NFPA 12 : 2015	CARBON DIOXIDE EXTINGUISHING SYSTEMS
ISO 14001:2015	Environmental management systems — Requirements with guidance for use
EN 50272-2:2001	Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries
ISO 13849-2:2012	Safety of machinery — Safety-related parts of control systems — Part 2: Validation
IEC 60079-0:2011	Explosive atmospheres - Part 0: Equipment - General requirements
IEC 60034-1:2017	Rotating electrical machines - Part 1: Rating and performance
IEC 60079-14:2013	Explosive atmospheres - Part 14: Electrical installations design, selection and erection
ISO 9001:2015	Quality management systems — Requirements
ISO 15156-1:2015	Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials
NFPA 13 : 2016	INSTALLATION OF SPRINKLER SYSTEMS
ISO 14520-1:2015	Gaseous fire-extinguishing systems — Physical properties and system design — Part 1: General requirements
IEC 61000-6-4:2006+AMD1:2010 CSV	Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
ISO 4414:2010	Pneumatic fluid power General rules and safety requirements for systems and their components
ISO 3864-3:2012	Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs
ISO 10441:2007	Petroleum, petrochemical and natural gas industries Flexible couplings for mechanical power transmission Special-purpose applications
IEC 61508-1:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508)
ISO 7000:2014	Graphical symbols for use on equipment Registered symbols
ISO 13732-3:2005	Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 3: Cold surfaces
ISO 3977-3:2004	Gas turbines — Procurement — Part 3: Design requirements
IEC 60730-2-17:1997+AMD1:2000+AMD2:2007 CSV	Automatic electrical controls for household and similar use - Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements
ISO 13849-1:2015	Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
IEC 61000-6-2 : 3.0:2016	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
EN 1838:2013	Lighting applications - Emergency lighting
ISO 10494:1993	Gas turbines and gas turbine sets Measurement of emitted airborne noise Engineering/survey method
ISO 19353:2015	Safety of machinery Fire prevention and fire protection
IEC TR 61000-5-1:1996	Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 1: General considerations - Basic EMC publication
NFPA 497 : 2017	CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS
IEC 60730-1:2013+AMD1:2015 CSV	Automatic electrical controls - Part 1: General requirements