• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 2082:2017

Current
Current

The latest, up-to-date edition.

Metallic and other inorganic coatings — Electroplated coatings of cadmium with supplementary treatments on iron or steel
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

French, English

Published date

03-08-2017

ISO 2082:2017 specifies the requirements of electroplated coatings of cadmium with supplementary treatments on iron and steel. It includes information that is to be supplied by the purchaser to the electroplater, and describes coating requirements, including those for heat treatment before and after electroplating.

It is not applicable to coatings applied

- to sheet, strip or wire in the non-fabricated form,

- to close-coiled springs, or

- for purposes other than protective, intrinsic lubricity, ductility, electrical conductivity and low contact resistance use.

ISO 2082:2017 does not specify requirements for the surface condition of the basis metal prior to electrodeposition with cadmium.

The coating thickness that can be applied to threaded components can be limited by dimensional requirements, including class or fit.

Additional information on corrosion resistance, rinsing and drying, processing parts in bulk and dyeing of chromate conversion coatings is given in Annex C.

Committee
ISO/TC 107/SC 3
DevelopmentNote
Supersedes ISO/DIS 2082. (08/2017)
DocumentType
Standard
Pages
13
PublisherName
International Organization for Standardization
Status
Current
Supersedes

ISO 13412:1997 Aerospace — Airframe needle track roller, yoke type, single-row, sealed — Inch series
ISO 13414:1997 Aerospace — Airframe needle roller bearings, single-row, shielded — Inch series
BS EN 2535:2011 Aerospace series. Vacuum deposition of cadmium
ISO 14212:1998 Aerospace — Airframe ball bearings, single-row, rigid, sealed, torque tube design, extra-light duty — Inch series
ABMA ISO 14211 : 1997 AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, PRECISION, SEALED, TORQUE TUBE DESIGN, LIGHT DUTY - INCH SERIES
ABMA ISO 14210 : 1998 AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, SEALED, TORQUE TUBE DESIGN, LIGHT DUTY - INCH SERIES
ISO 13416:1997 Aerospace — Airframe needle track roller, yoke type, single-row, sealed — Metric series
93/706720 DC : 0 PREN 2535 - AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM
ISO 4042:1999 Fasteners Electroplated coatings
ABMA ISO 13417 : 1997 AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, STUD TYPE, SINGLE-ROW, SEALED - METRIC SERIES
I.S. EN 2535:2011 AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM
ISO 14208:1998 Aerospace — Airframe ball bearings, single-row, rigid, sealed, intermediate duty — Inch series
ABMA ISO 14218 : 1997 AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, SELF-ALIGNING, SEALED, HEAVY DUTY - INCH SERIES
SAE J 1648 : 2013 PROTECTIVE COATINGS FOR FASTENERS
EN ISO 4042:1999 FASTENERS - ELECTROPLATED COATINGS (ISO 4042:1999)
BS EN ISO 4042:2000 Fasteners. Electroplated coatings
ASTM B 767 : 1988 : R2016 Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
DIN EN 15330-2:2015-09 (Draft) SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTI-SPORT SURFACES
BS EN ISO 7384:1995 Corrosion tests in artificial atmospheres. General requirements
EN 2133:2010 Aerospace series - Cadmium plating of steels with specified tensile strength ≤ 1 450 MPa, copper, copper alloys and nickel alloys
ABMA ISO 13413 : 1998 AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, YOKE TYPE, DOUBLE-ROW, SEALED - INCH SERIES
ABMA ISO 14221 : 1998 AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, SELF-ALIGNING, PRECISION, SEALED, LIGHT DUTY - INCH SERIES
ISO 13415:1997 Aerospace — Airframe needle track roller, stud type, single-row, sealed — Inch series
ISO 14203:1998 Aerospace — Airframe ball bearings, single-row, rigid, diameter series 8 and 9 — Metric series
15/30326242 DC : 0 BS EN 15330-2 - SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTISPORT SURFACES
16/30340972 DC : 0 BS EN ISO 27830 ED 2.0 - METALLIC AND OTHER INORGANIC COATINGS - GUIDELINES FOR SPECIFYING METALLIC AND INORGANIC COATINGS
ABMA ISO 14220 : 1998 AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, SELF-ALIGNING, SEALED, LIGHT DUTY - INCH SERIES
ABMA ISO 14202 : 1997 AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, DIAMETER SERIES 0 AND 2 - METRIC SERIES
PREN 2535 : 200P1 AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM
ASTM B 767 : 1988 : R2010 Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ABMA ISO 14209 : 1997 AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, PRECISION, SEALED, INTERMEDIATE DUTY - INCH SERIES
ABMA ISO 14217 : 1997 AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, SELF-ALIGNING, PRECISION, SEALED, HEAVY DUTY - INCH SERIES
ABMA ISO 14206 : 1997 AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, SEALED, LIGHT DUTY - INCH SERIES
ABMA ISO 14216 : 1997 AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, SELF-ALIGNING, SEALED, HEAVY DUTY - INCH SERIES
ABMA ISO 13416 : 1997 AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, YOKE TYPE, SINGLE-ROW, SEALED - METRIC SERIES
ISO 14214:1998 Aerospace — Airframe ball bearings, double-row, rigid, sealed, heavy duty — Inch series
ASTM B 767 : 1988 : R1994 Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM B 766 : 1986 : R1998 Standard Specification for Electrodeposited Coatings of Cadmium
ASTM B 767 : 1988 : R2006 Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
EN ISO 10111 : 2001 METALLIC AND OTHER INORGANIC COATINGS - MEASUREMENT OF MASS PER UNIT AREA - REVIEW OF GRAVIMETRIC AND CHEMICAL ANALYSIS METHODS
I.S. EN 15330-2:2017 SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTI-SPORT SURFACES
I.S. EN 2133:2010 AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS
UNI EN 2133 : 2011 AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS
ABMA ISO 14208 : 1997 AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, SEALED, INTERMEDIATE DUTY - INCH SERIES
ABMA ISO 14201 : 1998 AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, SELF-ALIGNING, DIAMETER SERIES 2 - METRIC SERIES
ABMA ISO 14204 : 1998 AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, RIGID, DIAMETER SERIES 0 - METRIC SERIES
PREN 15330-2 : DRAFT 2015 SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTISPORT SURFACES
ABMA ISO 14213 : 1997 AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, PRECISION, SEALED, TORQUE TUBE DESIGN, EXTRA-LIGHT DUTY - INCH SERIES
ISO 14206:1998 Aerospace — Airframe ball bearings, single-row, rigid, sealed, light duty — Inch series
ISO 13417:1997 Aerospace — Airframe needle track roller, stud type, single-row, sealed — Metric series
BS 6338:1982 Specification for chromate conversion coatings on electroplated zinc and cadmium coatings
ISO 14197:1998 Aerospace — Airframe spherical roller bearings, single row, self-aligning, sealed, intermediate duty — Inch series
ISO 14194:1998 Aerospace — Airframe spherical roller bearings, double row, self-aligning, sealed, extended inner ring, heavy duty — Inch series
ISO 10111:2000 Metallic and other inorganic coatings Measurement of mass per unit area Review of gravimetric and chemical analysis methods
DIN EN ISO 4042:2001-01 FASTENERS - ELECTROPLATED COATINGS
ABMA ISO 14194 : 1998 AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, DOUBLE-ROW, SELF-ALIGNING, SEALED, EXTENDED INNER RING, HEAVY DUTY - INCH SERIES
ABMA ISO 14193 : 1998 AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, SINGLE-ROW, SELF-ALIGNING, SEALED, EXTENDED INNER RING, INTERMEDIATE DUTY - INCH SERIES
ASTM B 766 : 1986 : R2003 Standard Specification for Electrodeposited Coatings of Cadmium
ISO 14191:1998 Aerospace — Airframe spherical roller bearings, single row, self-aligning, diameter series 3 and 4 — Metric series
ISO 14192:1998 Aerospace — Airframe spherical roller bearings, single row, self-aligning, shielded, intermediate duty — Metric series
ISO 10721-2:1999 Steel structures — Part 2: Fabrication and erection
ISO 14196:1998 Aerospace — Airframe spherical roller bearings, double row, self-aligning, sealed, plain inner ring, heavy duty — Inch series
ONORM EN 2535 : 2011 AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM
ABMA ISO 14192 : 1998 AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, SINGLE-ROW, SELF-ALIGNING, SHIELDED, INTERMEDIATE DUTY - METRIC SERIES
ABMA ISO 13415 : 1997 AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, STUD TYPE, SINGLE-ROW, SEALED - INCH SERIES
BS 6917:1987 Method for corrosion testing in artificial atmospheres: general principles
ASTM B 766 : 1986 : R2015 Standard Specification for Electrodeposited Coatings of Cadmium
DIN ISO 4042:1992-06 THREADED COMPONENTS - ELECTROPLATED COATINGS
BS 6060:1981 Specification for nipple-type lubrication fittings for earth-moving machinery
ONORM EN 2133 : 2011 AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH UP TO 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS
16/30339916 DC : 0 BS EN 2133 - AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS
17/30366369 DC : 0 BS EN 2133 AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS
07/30168266 DC : 0 BS ISO 27830 - METALLIC AND OTHER INORGANIC COATINGS - STANDARD GUIDE FOR SPECIFYING SUCH COATINGS
ISO 13413:1997 Aerospace — Airframe needle track roller, yoke type, double-row, sealed — Inch series
I.S. EN ISO 4042:1999 FASTENERS - ELECTROPLATED COATINGS
NF EN ISO 4042 : 1999 FASTENERS - ELECTROPLATED COATINGS
I.S. EN ISO 27830:2017 METALLIC AND OTHER INORGANIC COATINGS - REQUIREMENTS FOR THE DESIGNATION OF METALLIC AND INORGANIC COATINGS (ISO 27830:2017)
ABMA ISO 14219 : 1997 AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, SELF-ALIGNING, PRECISION, SEALED, HEAVY DUTY - INCH SERIES
ISO 14216:1998 Aerospace — Airframe ball bearings, double-row, self-aligning, sealed, heavy duty — Inch series
BS EN ISO 10111:2002 Metallic and other inorganic coatings. Measurement of mass per unit area. Review of gravimetric and chemical analysis methods
EN ISO 27830:2017 Metallic and other inorganic coatings - Requirements for the designation of metallic and inorganic coatings (ISO 27830:2017)
ISO 14210:1998 Aerospace — Airframe ball bearings, single-row, rigid, sealed, torque tube design, light duty — Inch series
ISO 14204:1998 Aerospace — Airframe ball bearings, double-row, rigid, diameter series 0 — Metric series
ISO 4520:1981 Chromate conversion coatings on electroplated zinc and cadmium coatings
ISO 7384:1986 Corrosion tests in artificial atmosphere General requirements
BS EN 2133:2010 Aerospace series. Cadmium plating of steels with specified tensile strength ≤ 1450 MPa, copper, copper alloys and nickel alloys
EN 15330-2:2017 Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 2: Specification for needle-punched surfaces for tennis and multi-sport surfaces
EN ISO 7384 : 1995 CORROSION TEST IN ARTIFICIAL ATMOSPHERE - GENERAL REQUIREMENTS
EN 2535:2011 Aerospace series - Vacuum deposition of cadmium
ABMA ISO 14214 : 1997 AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, RIGID, SEALED, HEAVY DUTY - INCH SERIES
ISO 14209:1998 Aerospace — Airframe ball bearings, single-row, rigid, precision, sealed, intermediate duty — Inch series
BS ISO 27830 : 2008 METALLIC AND OTHER INORGANIC COATINGS - GUIDELINES FOR SPECIFYING METALLIC AND INORGANIC COATINGS
ABMA ISO 14207 : 1998 AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, PRECISION, SEALED, LIGHT DUTY - INCH SERIES
ABMA ISO 14191 : 1997 AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, SINGLE-ROW, SELF-ALIGNING, DIAMETER SERIES 3 AND 4 - METRIC SERIES
ABMA ISO 13412 : 1998 AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, YOKE TYPE, SINGLE-ROW, SEALED - INCH SERIES
UNI EN 2535 : 2012 AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM
ABMA ISO 13414 : 1998 AEROSPACE - AIRFRAME NEEDLE ROLLER BEARINGS, SINGLE-ROW, SHIELDED - INCH SERIES
ABMA ISO 14197 : 1997 AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, SINGLE-ROW, SELF-ALIGNING, SEALED, INTERMEDIATE DUTY - INCH SERIES
ABMA ISO 14195 : 1998 AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, DOUBLE-ROW, SELF-ALIGNING, SEALED, TORQUE TUBE DESIGN, LIGHT DUTY - INCH SERIES
ABMA ISO 14212 : 1997 AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, SEALED, TORQUE TUBE DESIGN, EXTRA-LIGHT DUTY - INCH SERIES
ABMA ISO 14203 : 1998 AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, DIAMETER SERIES 8 AND 9 - METRIC SERIES
ISO 14201:1998 Aerospace — Airframe ball bearings, double-row, self-aligning, diameter series 2 — Metric series
ABMA ISO 14196 : 1998 AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, DOUBLE-ROW, SELF-ALIGNING, SEALED, PLAIN INNER RING, HEAVY DUTY - INCH SERIES
ISO 27830:2017 Metallic and other inorganic coatings — Requirements for the designation of metallic and inorganic coatings
ASTM B 766 : 1986 : R2008 Standard Specification for Electrodeposited Coatings of Cadmium
ASTM B 767 : 1988 : R2001 Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ABMA ISO 14215 : 1997 AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, RIGID, PRECISION, SEALED, HEAVY DUTY - INCH SERIES
ISO 14202:1998 Aerospace — Airframe ball bearings, single-row, rigid, diameter series 0 and 2 — Metric series
BS EN ISO 27830:2017 Metallic and other inorganic coatings. Requirements for the designation of metallic and inorganic coatings
GOST 9-302 : 1988 ERRATA 2007 UNIFIED SYSTEM OF CORROSION AND AGEING PROTECTION - METAL AND NON-METAL INORGANIC COATINGS - CONTROL METHODS
ISO 14217:1998 Aerospace — Airframe ball bearings, double-row, self-aligning, precision, sealed, heavy duty — Inch series
BS EN 15330-2:2017 Surfaces for sports areas. Synthetic turf and needle-punched surfaces primarily designed for outdoor use Specification for needle-punched surfaces for tennis and multi-sport surfaces
DIN EN 15330-2:2017-09 SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTI-SPORT SURFACES

ISO 2080:2008 Metallic and other inorganic coatings Surface treatment, metallic and other inorganic coatings Vocabulary
ISO 9587:2007 Metallic and other inorganic coatings Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
ISO 27830:2008 Metallic and other inorganic coatings Guidelines for specifying metallic and inorganic coatings
ISO 3543:2000 Metallic and non-metallic coatings Measurement of thickness Beta backscatter method
ISO 27831-1:2008 Metallic and other inorganic coatings — Cleaning and preparation of metal surfaces — Part 1: Ferrous metals and alloys
ISO 1463:2003 Metallic and oxide coatings Measurement of coating thickness Microscopical method
ISO 10587:2000 Metallic and other inorganic coatings Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods Inclined wedge method
ISO 15724:2001 Metallic and other inorganic coatings — Electrochemical measurement of diffusible hydrogen in steels — Barnacle electrode method
ISO 3892:2000 Conversion coatings on metallic materials Determination of coating mass per unit area Gravimetric methods
ISO 4518:1980 Metallic coatings Measurement of coating thickness Profilometric method
ISO 2819:1980 Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion
ISO 27831-2:2008 Metallic and other inorganic coatings — Cleaning and preparation of metal surfaces — Part 2: Non-ferrous metals and alloys
ASTM E 527 : 2016 : REDLINE Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
ISO 4519:1980 Electrodeposited metallic coatings and related finishes — Sampling procedures for inspection by attributes
ISO 3497:2000 Metallic coatings Measurement of coating thickness X-ray spectrometric methods
ISO 9588:2007 Metallic and other inorganic coatings Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement
ISO 2178:2016 Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method
ISO 9227:2017 Corrosion tests in artificial atmospheres — Salt spray tests
ISO 2177:2003 Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution
ISO 10289:1999 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates Rating of test specimens and manufactured articles subjected to corrosion tests
ISO 3613:2010 Metallic and other inorganic coatings Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys Test methods
ISO 2064:1996 Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness

View more information
£88.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.