• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 230-2:2014

Current
Current

The latest, up-to-date edition.

Test code for machine tools Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

23-04-2014

ISO 230-2:2014 specifies methods for testing and evaluating the accuracy and repeatability of positioning of numerically controlled machine tool axes by direct measurement of individual axes on the machine. These methods apply equally to linear and rotary axes.

ISO 230-2:2014 can be used for type testing, acceptance tests, comparison testing, periodic verification, machine compensation, etc. The methods involve repeated measurements at each position. The related parameters of the test are defined and calculated. Their uncertainties are estimated as described in ISO/TR 230-9:2005, Annex C.

DevelopmentNote
Supersedes ISO/DIS 230-2. (04/2014)
DocumentType
Standard
Pages
43
PublisherName
International Organization for Standardization
Status
Current
Supersedes

08/30176399 DC : DRAFT JAN 2008 BS ISO 26303-1 - MACHINE TOOLS - RELIABILITY, AVAILABILITY AND CAPABILITY - PART 1: CAPABILITY EVALUATION OF MACHINING PROCESSES ON METAL-CUTTING MACHINE TOOLS
ISO/TR 17243-2:2017 Machine tool spindles Evaluation of spindle vibrations by measurements on non-rotating parts Part 2: Direct-driven spindles and belt-driven spindles with rolling element bearings operating at speeds between 600 r/min and 30 000 r/min
BS ISO 3070-2:1997 Test conditions for boring and milling machines with horizontal spindle. Testing of the accuracy Table-type machines
04/30112390 DC : 0 ISO 3070-2 - TEST CONDITIONS FOR BORING AND MILLING MACHINES WITH HORIZONTAL SPINDLE - TESTING OF ACCURACY - PART 2: FLOOR-TYPE MACHINES WITH DETACHED, STATIONARY WORK-HOLDING TABLE
13/30281589 DC : 0 BS ISO 14137 - TEST CONDITIONS FOR WIRE ELECTRICAL-DISCHARGE MACHINES (WIRE EDM) - TESTING OF THE ACCURACY
PD ISO/TR 17243-1:2014 Machine tool spindles. Evaluation of machine tool spindle vibrations by measurements on spindle housing Spindles with rolling element bearings and integral drives operating at speeds between 600 min$u-<sup>1</sup> and 30 000 min$u-<sup>1</sup>
BS ISO 3070-4:1998 Test conditions for boring and milling machines with horizontal spindle. Testing of the accuracy Planer type machines with movable column
05/30141125 DC : DRAFT NOV 2005 ISO 10791-10 - TEST CONDITIONS FOR MACHINING CENTRES - PART 10: EVALUATION OF THERMAL DISTORTIONS
ISO 230-6:2002 Test code for machine tools — Part 6: Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests)
PD ISO/TR 17243-2:2017 Machine tool spindles. Evaluation of spindle vibrations by measurements on non-rotating parts Direct-driven spindles and belt-driven spindles with rolling element bearings operating at speeds between 600 r/min and 30 000 r/min
03/118896 DC : DRAFT JAN 2004 ISO 230-4 - TEST CODE FOR MACHINE TOOLS - PART 4: CIRCULAR TESTS FOR NUMERICALLY CONTROLLED MACHINE TOOLS
ISO 8636-2:2007 Machine tools Test conditions for bridge-type milling machines Testing of the accuracy Part 2: Travelling bridge (gantry-type) machines
BS ISO 14137:2015 Test conditions for wire electrical-discharge machines (wire EDM). Testing of the accuracy
04/30112380 DC : 0 ISO 3070-1 - TEST CONDITIONS FOR BORING AND MILLING MACHINES WITH HORIZONTAL SPINDLE - TESTING OF ACCURACY - PART 1: TABLE-TYPE MACHINES
BS ISO 230-4:2005 Test code for machine tools Circular tests for numerically controlled machine tools
ISO 14137:2015 Test conditions for wire electrical-discharge machines (wire EDM) — Testing of the accuracy
UNI ISO 3875 : 2009 MACHINE TOOLS - TEST CONDITIONS FOR EXTERNAL CYLINDRICAL CENTRELESS GRINDING MACHINES - TESTING OF THE ACCURACY
ISO 230-7:2015 Test code for machine tools Part 7: Geometric accuracy of axes of rotation
ISO 230-1:2012 Test code for machine tools — Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions
UNI ISO 4703 : 2009 TEST CONDITIONS FOR SURFACE GRINDING MACHINES WITH TWO COLUMNS - MACHINES FOR GRINDING SLIDEWAYS - TESTING OF THE ACCURACY
UNI ISO 10791-5 : 2010 TEST CONDITIONS FOR MACHINING CENTRES - PART 5: ACCURACY AND REPEATABILITY OF POSITIONING OF WORK-HOLDING PALLETS
DIN EN ISO 15616-1 E : 2003 ACCEPTANCE TESTS FOR CO[2]-LASER BEAM MACHINES FOR HIGH QUALITY WELDING AND CUTTING - PART 1: GENERAL PRINCIPLES, ACCEPTANCE CONDITIONS
BS EN ISO 15616-2:2003 Acceptance tests for CO<sub>2</sub>- laser beam machines for high quality welding and cutting Measurement of static and dynamic accuracy
BS EN ISO 22827-2:2005 Acceptance tests for Nd:YAG laser beam welding machines. Machines with optical fibre delivery Moving mechanism
UNE-ISO/TR 16907:2018 IN Machine tools -- Numerical compensation of geometric errors
UNI ISO 10791-4 : 2010 TEST CONDITIONS FOR MACHINING CENTRES - PART 4: ACCURACY AND REPEATABILITY OF POSITIONING OF LINEAR AND ROTARY AXES
PD ISO/TR 230-9:2005 Test code for machine tools Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations
BS 3800-2:1991 General tests for machine tools Statistical methods for determination of accuracy and repeatability of machine tools
ISO 1985:2015 Machine tools — Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of the accuracy
BS ISO 1985:2015 Machine tools. Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table. Testing of the accuracy
BS ISO 8636-2:2007 Machine tools. Test conditions for bridge-type milling machines. Testing of the accuracy Travelling bridge (gantry-type) machines
UNE-ISO 230-10:2016 Test code for machine tools -- Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools.
ISO 3070-1:2007 Machine tools Test conditions for testing the accuracy of boring and milling machines with horizontal spindle Part 1: Machines with fixed column and movable table
BS ISO 230-10:2016 Test code for machine tools Determination of the measuring performance of probing systems of numerically controlled machine tools
ISO 3070-2:2016 Machine tools Test conditions for testing the accuracy of boring and milling machines with horizontal spindle Part 2: Machines with movable column along the X-axis (floor type)
ISO 230-4:2005 Test code for machine tools Part 4: Circular tests for numerically controlled machine tools
UNI ISO 13041-4 : 2010 TEST CONDITIONS FOR NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES - PART 4: ACCURACY AND REPEATABILITY OF POSITIONING OF LINEAR AND ROTARY AXES
ISO 26303:2012 Machine tools Short-term capability evaluation of machining processes on metal-cutting machine tools
UNE-ISO 26303:2013 Machine tools -- Short-term capability evaluation of machining processes on metal-cutting machine tools
DIN ISO 3070-3:2003-05 MACHINE TOOLS - TEST CONDITIONS FOR BORING AND MILLING MACHINES WITH HORIZONTAL SPINDLE; TESTING OF THE ACCURACY - PART 3: FLOOR-TYPE MACHINES WITH DETACHED, STATIONARY WORK-HOLDING TABLE
DIN ISO 3070-2:2003-05 MACHINE TOOLS - TEST CONDITIONS FOR BORING AND MILLING MACHINES WITH HORIZONTAL SPINDLE; TESTING OF THE ACCURACY - PART 2: TABLE-TYPE MACHINES
DIN ISO 3070-4:2003-05 MACHINE TOOLS - TEST CONDITIONS FOR BORING AND MILLING MACHINES WITH HORIZONTAL SPINDLE; TEST OF THE ACCURACY - PART 4: PLANER TYPE MACHINES WITH MOVABLE COLUMN
ASME B5.57 : 2012 METHODS FOR PERFORMANCE EVALUATION OF COMPUTER NUMERICALLY CONTROLLED LATHES AND TURNING CENTERS
VDI/NCG 5211 Blatt 3:2012-05 (Draft) Test work pieces for machine tools - Milling - Micromachining
ASME B5.57 : 2012 : R2017 METHODS FOR PERFORMANCE EVALUATION OF COMPUTER NUMERICALLY CONTROLLED LATHES AND TURNING CENTERS
ISO 4703:2001 Test conditions for surface grinding machines with two columns — Machines for grinding slideways — Testing of the accuracy
12/30255489 DC : 0 BS ISO 11090-2 - TEST CONDITIONS FOR DIE SINKING ELECTRO-DISCHARGE MACHINES (EDM) - TERMINOLOGY AND TESTING OF ACCURACY - PART 2: DOUBLE-COLUMN MACHINES (SLIDE-HEAD TYPE AND CROSS-SLIDE TABLE TYPE)
12/30255483 DC : 0 BS ISO 1985 - MACHINE TOOLS - TEST CONDITIONS FOR SURFACE GRINDING MACHINES WITH VERTICAL GRINDING WHEEL SPINDLE AND RECIPROCATING TABLE - TESTING OF THE ACCURACY
09/30118717 DC : DRAFT OCT 2009 BS ISO 230-1 - TEST CODE FOR MACHINE TOOLS - PART 1: GEOMETRIC ACCURACY OF MACHINES OPERATING UNDER NO-LOAD OR QUASI-STATIC CONDITIONS
BS ISO 3070-3:1997 Test conditions for boring and milling machines with horizontal spindle. Testing of the accuracy Floor type machines with detached, stationary work-holding table
UNE-ISO 230-1:2014 Machine-tools. Test code for machine tools -- Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions
04/30112396 DC : 0 ISO 3070-3 - TEST CONDITIONS FOR BORING AND MILLING MACHINES WITH HORIZONTAL SPINDLE - TESTING OF ACCURACY - PART 3: PLANER-TYPE MACHINES WITH MOVABLE COLUMN
BS ISO 3070-1:2007 Machine tools. Test conditions for testing the accuracy of boring and milling machines with horizontal spindle Machines with fixed column and movable table
UNI ISO 10791-10 : 2010 TEST CONDITIONS FOR MACHINING CENTRES - PART 10: EVALUATION OF THERMAL DISTORTIONS
05/30133690 DC : DRAFT MAY 2005 IEC 60309-2 - PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 2: DIMENSIONAL INTERCHANGEABILITY REQUIREMENTS FOR PIN AND CONTACT-TUBE ACCESSORIES
BS ISO 26303:2012 Machine tools — Short-term capability evaluation of machining processes on metal-cutting machine tools
BS ISO 6155:1998 Machine tools. Test conditions for horizontal spindle turret and single spindle automatic lathes. Testing of the accuracy
PD ISO/TR 16907:2015 Machine tools. Numerical compensation of geometric errors
ISO 2433:1999 Machine tools Test conditions for external cylindrical and universal grinding machines with a movable table Testing of accuracy
UNI ISO 230-4 : 2010 TEST CODE FOR MACHINE TOOLS - PART 4: CIRCULAR TESTS FOR NUMERICALLY CONTROLLED MACHINE TOOLS
UNI ISO 3070-3 : 2009 MACHINE TOOLS - TEST CONDITIONS FOR TESTING THE ACCURACY OF BORING AND MILLING MACHINES WITH HORIZONTAL SPINDLE - PART 3: MACHINES WITH MOVABLE COLUMN AND MOVABLE TABLE
ISO 8636-1:2000 Machine tools — Test conditions for bridge-type milling machines — Testing of the accuracy — Part 1: Fixed bridge (portal-type) machines
UNI ISO 8636-2 : 2009 MACHINE TOOLS - TEST CONDITIONS FOR BRIDGE-TYPE MILLING MACHINES - TESTING OF THE ACCURACY - PART 2: TRAVELLING BRIDGE (GANTRY-TYPE) MACHINES
ISO 11090-1:2014 Test conditions for die sinking electro-discharge machines (die sinking EDM) Testing of the accuracy Part 1: Single-column machines (cross-slide table type and fixed-table type)
ISO 3070-3:2007 Machine tools Test conditions for testing the accuracy of boring and milling machines with horizontal spindle Part 3: Machines with movable column and movable table
ISO 15616-2:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting Part 2: Measurement of static and dynamic accuracy
BS EN ISO 15616-1:2003 Acceptance tests for CO<sub>2</sub>- laser beam machines for high quality welding and cutting General principles, acceptance conditions
EN ISO 22827-2:2005 Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 2: Moving mechanism (ISO 22827-2:2005)
UNI ISO 230-6 : 2010 TEST CODE FOR MACHINE TOOLS - PART 6: DETERMINATION OF POSITIONING ACCURACY ON BODY AND FACE DIAGONALS (DIAGONAL DISPLACEMENT TESTS)
ISO 3875:2004 Machine tools Test conditions for external cylindrical centreless grinding machines Testing of the accuracy
UNI ISO 8636-1 : 2010 MACHINE TOOLS - TEST CONDITIONS FOR BRIDGE-TYPE MILLING MACHINES - TESTING OF THE ACCURACY - PART 1: FIXED BRIDGE (PORTAL-TYPE) MACHINES
BS ISO 13041-4:2004 Test conditions for numerically controlled turning machines and turning centres Accuracy and repeatability of positioning of linear and rotary axes
BS ISO 3875:2004 Machine tools. Test conditions for external cylindrical centreless grinding machines. Testing of the accuracy
BS ISO 10791-4:1998 Test conditions for machining centres Accuracy and repeatability of positioning of linear and rotary axes
ISO/TR 230-9:2005 Test code for machine tools Part 9: Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations
09/30201036 DC : 0 BS EN 4677-002 - AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - ELECTRON BEAM WELDING MACHINE - PART 002: QUALIFICATION SPECIFICATIONS
14/30267668 DC : 0 BS ISO 17543-1 - MACHINES TOOLS - TEST CONDITIONS FOR ACCESSORY SPINDLE HEADS - PART 1: HORIZONTAL SPINDLE MACHINES
BS ISO 230-1:2012 Test code for machine tools Geometric accuracy of machines operating under no-load or quasi-static conditions
BS ISO 10791-10:2007 Test conditions for machining centres Evaluation of thermal distortions
BS ISO 230-6:2002 Test code for machine tools Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests)
ISO 10791-10:2007 Test conditions for machining centres — Part 10: Evaluation of thermal distortions
BS ISO 4703:2001 Test conditions for surface grinding machines with two columns. Machines for grinding slideways. Testing of the accuracy
UNI ISO 2433 : 2009 MACHINE TOOLS - TEST CONDITIONS FOR EXTERNAL CYLINDRICAL AND UNIVERSAL GRINDING MACHINES WITH A MOVABLE TABLE - TESTING OF THE ACCURACY
ISO/TR 230-11:2018 Test code for machine tools Part 11: Measuring instruments suitable for machine tool geometry tests
ISO/TR 17243-1:2014 Machine tool spindles Evaluation of machine tool spindle vibrations by measurements on spindle housing Part 1: Spindles with rolling element bearings and integral drives operating at speeds between 600 min-1 and 30 000 min-1
ISO 3070-4:1998 Test conditions for boring and milling machines with horizontal spindle Testing of the accuracy Part 4: Planer type machines with movable column
ISO 230-10:2016 Test code for machine tools Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools
ISO 15616-1:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting Part 1: General principles, acceptance conditions
ISO 22827-2:2005 Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Part 2: Moving mechanism
EN ISO 15616-2:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003)
EN ISO 15616-1:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions (ISO 15616-1:2003)
BS ISO 10791-5:1998 Test conditions for machining centres Accuracy and repeatability of positioning of work-holding pallets
BS ISO 11090-1:2014 Test conditions for die sinking electro-discharge machines (die sinking EDM). Testing of the accuracy Single-column machines (cross-slide table type and fixed-table type)
12/30255486 DC : 0 BS ISO 11090-1 - TEST CONDITIONS FOR DIE SINKING ELECTRO-DISCHARGE MACHINES (EDM) - TERMINOLOGY AND TESTING OF ACCURACY - PART 1: SINGLE COLUMN MACHINES (CROSS-SLIDE TABLE TYPE AND FIXED-TABLE TYPE)
14/30263478 DC : 0 BS ISO 3070-2 - MACHINE TOOLS - TEST CONDITIONS FOR TESTING THE ACCURACY OF BORING AND MILLING MACHINES WITH HORIZONTAL SPINDLE - PART 2: MACHINES WITH MOVABLE COLUMN ALONG THE X-AXIS (FLOOR TYPE)
ISO 11090-2:2014 Test conditions for die sinking electro-discharge machines (die sinking EDM) Testing of the accuracy Part 2: Double-column machines (slide-head type)
13/30263139 DC : 0 BS ISO 230-7 - MACHINE TOOLS - TEST CODE FOR MACHINE TOOLS - PART 7: GEOMETRIC ACCURACY OF AXES OF ROTATION
BS ISO 11090-2:2014 Test conditions for die sinking electro-discharge machines (die sinking EDM). Testing of the accuracy Double-column machines (slide-head type)
UNI ISO 3070-1 : 2009 MACHINE TOOLS - TEST CONDITIONS FOR TESTING THE ACCURACY OF BORING AND MILLING MACHINES WITH HORIZONTAL SPINDLE - PART 1: MACHINES WITH FIXED COLUMN AND MOVABLE TABLE
ISO 13041-4:2004 Test conditions for numerically controlled turning machines and turning centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
ISO/TR 16907:2015 Machine tools Numerical compensation of geometric errors
ISO 10791-5:1998 Test conditions for machining centres Part 5: Accuracy and repeatability of positioning of work-holding pallets
BS ISO 230-7:2015 Test code for machine tools Geometric accuracy of axes of rotation
DIN EN ISO 22827-2:2006-02 Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 2: Moving mechanism (ISO 22827-2:2005)
DIN EN ISO 15616-2 E : 2003 ACCEPTANCE TESTS FOR CO[2]-LASER BEAM MACHINES FOR HIGH QUALITY WELDING AND CUTTING - PART 2: MEASUREMENT OF STATIC AND DYNAMIC ACCURACY
ASME B89.1.8 : 2011 PERFORMANCE EVALUATION OF DISPLACEMENT-MEASURING LASER INTERFEROMETERS
ASME B89.1.8 : 2011 : R2016 PERFORMANCE EVALUATION OF DISPLACEMENT-MEASURING LASER INTERFEROMETERS

ISO/TR 230-9:2005 Test code for machine tools Part 9: Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations
ISO/IEC Guide 99:2007 International vocabulary of metrology Basic and general concepts and associated terms (VIM)
ISO 230-1:2012 Test code for machine tools — Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions
ISO/TR 16015:2003 Geometrical product specifications (GPS) — Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences
ISO/TR 16907:2015 Machine tools Numerical compensation of geometric errors
ISO 230-3:2007 Test code for machine tools Part 3: Determination of thermal effects
VDI/DGQ 3441:1977-03 Statistical Testing of the Operational and Positional Accuracy of Machine Tools; Basis
ISO/IEC Guide 98-3:2008 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)

View more information
£159.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.