ISO 2528:2017
Current
Current
The latest, up-to-date edition.
Sheet materials — Determination of water vapour transmission rate (WVTR) — Gravimetric (dish) method
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
13-10-2017
ISO 2528:2017 specifies a method for the determination of the water vapour transmission rate (often erroneously called "permeability") of sheet materials.
This method is not generally recommended for use if the transmission rate is expected to be less than 1 g/m2 per day or for materials thicker than 3 mm. In such cases the method specified in ISO 9932 is preferred.
The method cannot be applied to film materials that are damaged by hot wax or that shrink to an appreciable extent under the test conditions used.
For some purposes it may be necessary to determine the transmission rate of creased material; a procedure for this is given in Annex A.
| Committee |
ISO/TC 6/SC 2
|
| DevelopmentNote |
Supersedes ISO/FDIS 2528. (10/2017)
|
| DocumentType |
Standard
|
| Pages |
15
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SS-ISO 2528:2018 | Identical |
| BS ISO 2528:2017 | Identical |
| PN ISO 2528 : 2000 | Identical |
| UNI ISO 2528:2018 | Identical |
| NEN ISO 2528 : 2017 | Identical |
| NF ISO 2528 : 2017 | Identical |
| UNI ISO 2528 : 2007 | Identical |
| IS 17846 : 2022 | Identical |
| SAC GB/T 2679-2 : 1995 | Identical |
| UNI 9278 : 1988 | Similar to |
| UNE 53097:2002 | Identical |
| UNE 57114:1984 | Identical |
| BS ISO 16525-1:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives General test methods |
| DIN EN ISO 7783:2012-02 | PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION PROPERTIES - CUP METHOD (ISO 7783:2011) |
| TAPPI T 465 : 2006 | STATIC CREASING OF PAPER FOR WATER VAPOR TRANSMISSION TESTS |
| PREN 13160-7 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 7: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR INTERSTITIAL SPACES, LEAK DETECTION LININGS AND LEAK DETECTION JACKETS |
| UNI EN ISO 7783 : 2012 | PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION PROPERTIES - CUP METHOD |
| 15/30319712 DC : 0 | BS EN 1279-4 - GLASS IN BUILDING - INSULATING GLASS UNITS - PART 4: METHODS OF TEST FOR THE PHYSICAL ATTRIBUTES OF EDGE SEAL COMPONENTS AND INSERTS |
| DIN EN ISO 15106-3:2005-05 | PLASTICS - FILM AND SHEETING - DETERMINATION OF WATER VAPOUR TRANSMISSION RATE - PART 3: ELECTROLYTIC DETECTION SENSOR METHOD |
| BS EN ISO 15106-3:2005 | Plastics. Film and sheeting. Determinaktion of water vapour transmission rate Electrolytic detection sensor method |
| BS EN ISO 15106-1:2005 | Plastics. Film and sheeting. Determination of water vapour transmission rate Humidity detection sensor method |
| EN 13160-7:2016 | Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets |
| 14/30301266 DC : 0 | BS EN 13160-7 - LEAK DETECTION SYSTEMS - PART 7: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR INTERSTITIAL SPACES, LEAK DETECTION LININGS AND LEAK DETECTION JACKETS |
| DIN EN 14716:2005-03 | Stretched ceilings - Requirements and tests methods; German version EN 14716:2004 |
| BS EN 14716:2004 | Stretched ceilings. Requirements and test methods |
| ISO 15106-2:2003 | Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 2: Infrared detection sensor method |
| I.S. EN 13160-7:2016 | LEAK DETECTION SYSTEMS - PART 7: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR INTERSTITIAL SPACES, LEAK DETECTION LININGS AND LEAK DETECTION JACKETS |
| I.S. EN ISO 6179:2017 | RUBBER, VULCANIZED OR THERMOPLASTIC - RUBBER SHEETS AND RUBBER-COATED FABRICS - DETERMINATION OF TRANSMISSION RATE OF VOLATILE LIQUIDS (GRAVIMETRIC TECHNIQUE) (ISO 6179:2017) |
| BS 3412:1992 | Methods of specifying general purpose polyethylene materials for moulding and extrusion |
| BS 4936:1987 | Method of specifying styrene-acrylonitrile (SAN) moulding and extrusion materials |
| BS 1493:1987 | Method of specifying general purpose polystyrene (PS) moulding and extrusion materials |
| BS 903-A46:1991 | Physical testing of rubber Method for determination of the transmission rate of volatile liquids |
| I.S. EN ISO 7783-1:1999 | PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION RATE - PART 1: DISH METHOD FOR FREE FILMS |
| PREN 1279-4 : DRAFT 2015 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 4: METHODS OF TEST FOR THE PHYSICAL ATTRIBUTES OF EDGE SEAL COMPONENTS AND INSERTS |
| BS ISO 4046-5:2016 | Paper, board, pulps and related terms. Vocabulary Properties of pulp, paper and board |
| UNE-EN ISO 7783:2012 | Paints and varnishes - Determination of water-vapour transmission properties - Cup method (ISO 7783:2011) |
| ISO 4046-5:2002 | Paper, board, pulps and related terms Vocabulary Part 5: Properties of pulp, paper and board |
| UNE-EN 13160-7:2017 | Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets |
| DIN EN ISO 15106-2:2005-05 | PLASTICS - FILM AND SHEETING - DETERMINATION OF WATER VAPOUR TRANSMISSION RATE - PART 2: INFRARED DETECTION SENSOR METHOD |
| DIN EN ISO 15106-1:2005-05 | PLASTICS - FILM AND SHEETING - DETERMINATION OF WATER VAPOUR TRANSMISSION RATE - PART 1: HUMIDITY DETECTION SENSOR METHOD |
| ISO 7783:2011 | Paints and varnishes Determination of water-vapour transmission properties Cup method |
| 08/30189225 DC : DRAFT DEC 2008 | BS EN ISO 7783 - PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION PROPERTIES - CUP METHOD |
| TAPPI T 465 : 2006 : R2010 | STATIC CREASING OF PAPER FOR WATER VAPOR TRANSMISSION TESTS |
| 17/30352674 DC : 0 | BS IEC 62788-6-2 - MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 6-2: GENERAL TESTS - MOISTURE PERMEATION TESTING WITH POLYMERIC FILMS |
| BS 7825-3.3:1997 | Calibration of rubber and plastics test equipment. Calibration schedules Mechanical properties of plastics |
| BS EN ISO 7783:2011 | Paints and varnishes. Determination of water-vapour transmission properties. Cup method |
| BS 3900-G9(1996) : 1996 AMD 10384 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE - DETERMINATION OF WATER-VAPOUR TRANSMISSION RATE OF FREE FILMS (DISH METHOD) |
| 14/30311128 DC : 0 | BS EN 14716 - STRETCHED CEILINGS - REQUIREMENTS AND TEST METHODS |
| DIN EN 14716 E : 2005 | STRETCHED CEILINGS - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 7783-1:2000 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete Determination of water-vapour transmission rate of free films (dish method) |
| BS EN 13160-7:2003 | Leak detection systems General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets |
| UNE-EN ISO 6179:2018 | Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:2017) |
| BS EN ISO 15106-2:2005 | Plastics. Film and sheeting. Determination of water vapour transmission rate Infrared detection sensor method |
| BS EN ISO 6179:2017 | Rubber, vulcanized or thermoplastic. Rubber sheets and rubber-coated fabrics. Determination of transmission rate of volatile liquids (gravimetric technique) |
| ISO 15106-1:2003 | Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 1: Humidity detection sensor method |
| ISO 6179:2017 | Rubber, vulcanized or thermoplastic Rubber sheets and rubber-coated fabrics Determination of transmission rate of volatile liquids (gravimetric technique) |
| ISO 15106-3:2003 | Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 3: Electrolytic detection sensor method |
| EN ISO 15106-1:2005 | Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 1: Humidity detection sensor method (ISO 15106-1:2003) |
| EN 14716:2004 | Stretched ceilings - Requirements and test methods |
| EN ISO 6179:2017 | Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:2017) |
| EN ISO 15106-3:2005 | Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 3: Electrolytic detection sensor method (ISO 15106-3:2003) |
| EN ISO 7783-1:1999 | Paints and varnishes - Determination of water-vapour transmission rate - Part 1: Dish method for free films (ISO 7783-1:1996, including Technical Corrigendum 1:1998) |
| EN ISO 15106-2:2005 | Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method (ISO 15106-2:2003) |
| PREN 14716 : DRAFT 2014 | STRETCHED CEILINGS - REQUIREMENTS AND TEST METHODS |
| BS 4618-5.5:1974 | Recommendations for the presentation of plastics design data. Other properties Data on diffusion |
| DIN 53122-1 E : 2001 | TESTING OF PLASTICS AND ELASTOMER FILMS, PAPER, BOARD AND OTHER SHEET MATERIALS - DETERMINATION OF WATER VAPOUR TRANSMISSION - PART 1: GRAVIMETRIC METHOD |
| BS 3126:1987 | Method of specifying toughened polystyrene (SB) moulding and extrusion materials |
| TAPPI T 464 : 2012 | WATER VAPOR TRANSMISSION RATE OF PAPER AND PAPERBOARD AT HIGH TEMPERATURE AND HUMIDITY |
| 03/310127 DC : DRAFT JUNE 2003 | EN 14716 - STRETCHED CEILINGS - REQUIREMENTS AND TEST METHODS |
| EN ISO 7783:2011 | Paints and varnishes - Determination of water-vapour transmission properties - Cup method (ISO 7783:2011) |
| I.S. EN ISO 7783:2011 | PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION PROPERTIES - CUP METHOD (ISO 7783:2011) |
| ISO 16525-1:2014 | Adhesives Test methods for isotropic electrically conductive adhesives Part 1: General test methods |
| DIN 53122-1:2001-08 | Testing of plastics and elastomer films, paper, board and other sheet materials - Determination of water vapour transmission - Part 1: Gravimetric method |
| BS 4935:1989 | Method of specifying acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials |
| ISO 9932:1990 | Paper and board Determination of water vapour transmission rate of sheet materials Dynamic sweep and static gas methods |
| ISO 209:2007 | Aluminium and aluminium alloys — Chemical composition |
| ISO 23529:2016 | Rubber General procedures for preparing and conditioning test pieces for physical test methods |
| ISO 187:1990 | Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
| ISO 2233:2000 | Packaging Complete, filled transport packages and unit loads Conditioning for testing |
| ISO 186:2002 | Paper and board — Sampling to determine average quality |
| ISO 2231:1989 | Rubber- or plastics-coated fabrics — Standard atmospheres for conditioning and testing |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
£88.00
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.